One of the stylistic 'conventions' I find slightly irritating in published code, is the use of:
if(condition) {
instead of (my preference):
if (condition) {
A slight difference, and probably an unimportant one, but it occurred to me that the first style might be justified if 'if' statements were implemented as a kind of function call. Then I could stop objecting to it.
Does anyone know of a programming language where an if statement is implemented as a function call, where the argument is a single boolean expression?
EDIT: I realise the blocks following the if() are problematic, and the way I expressed my question was probably too naive, but I'm encouraged by the answers so far.
tcl is one language which implements if as a regular in built function/command which takes two parameters ; condition and the code block to execute
if {$vbl == 1} { puts "vbl is one" }
http://tmml.sourceforge.net/doc/tcl/if.html
In fact, all language constructs in tcl (for loop , while loop etc.) are implemented as commands/functions.
It's impossible for it to have a single argument since it has to decide which code path to follow, which would have to be done outside of said function. It would need at least two arguments, but three would allow an "else" condition.
Lisp's if has exactly the same syntax as any other macro in the language (it's not quite exactly a function, but the difference is minimal): (if cond then else)
Both the 'then' and 'else' clauses are left unevaluated unless the condition selects them.
In Smalltalk, an if statement is kind of a function call -- sort of, in (of course) a completely object oriented way, so it's really a method not a free function. I'm not sure how it would affect your thinking on syntax though, since the syntax is completely different, looking like:
someBoolean
ifTrue: [ do_something ]
ifFalse: [ do_something_else ]
Given that this doesn't contain any parentheses at all, you can probably interpret it as proving whatever you wanted to believe. :-)
If the if function is to be a regular function, then it can't just take the condition, it needs as its parameters the block of code to run depending on whether the condition evaluates to true or not.
A prototype for a function like that in C++ might be something along the lines of
void custom_if(bool cond, void (*block)());
This function can either call the block function, or not, depending on cond.
In some functional languages things are much easier. In Haskell, a simple function like:
if' True a _ = a
if' _ _ b = b
allows you to write code like this:
if' (1 == 1)
(putStrLn "Here")
(putStrLn "There")
which will always print Here.
I don't know of any languages where if(condition) is implemented as a regular function call, but Perl implements try { } catch { } etc.. {} as function calls.
Why can't the conditional operator be used as a statement?
I would like to do something like:
boolean isXyz = ...;
...
isXyz ? doXyz() : doAbc();
where doXyz and doAbc are return void.
Note that this is not the same as other operators, for example doXyz() + doAbc() intrinsically needs that doXyz and doAbc return a number-like something to operate (or strings to concatenate, or whatever, but the point is that + actually needs values to operate on).
Is there something deep or is it just an arbitrary decision.
Note: I come from the Java world, but I would like to know if this is possible in your favourite programming language.
C and C++ do allow such constructs. As long as doXyz() and doAbc() return the same type. Including void.
What would be the point? Why not just use an if statement (which, in my opinion, looks cleaner)?
Because it would reduce readability and introduce a potential for errors.
Languages offer means of doing what you wish by using the keyword "if".
// Is not much longer than the line below
// but significantly more transparent
if (isXyz) doXyz() else doAbc();
isXyz ? doXyz() : doAbc();
A statement is supposed to just perform some operations.
A conditional operator is meant to return a value.
As a novelty, mIRCscripting allows you to do this
alias canI? {
$iif($1 == 1,doThis,doThat)
}
alias doThis echo -a this can.
alias doThat echo -a that can.
calling it with /canI? 1 will echo this can.
calling it with /canI? 2 will echo that can.
Wouldn't this be exactly the same as the if statement?
if (isXyz) doXyz(); else doAbc();
Some languages do allow you to use the conditional operator as a statement. Perl comes to mind.
An expression, including a conditional expression, may be used on its own as a statement in Java and many other languages (I'd go as far as to say most currently-popular languages).
It's specifically ‘void-returning’ in Java that's the issue here, not anything to do with conditionals. It's sometimes considered bad taste to hide active (non-idempotent; with side-effects) code inside an expression, and active functions often return void. So because Java is a prescriptive language, it disallows using a void function in an expression. Many other languages are more permissive and will allow it.
You could get around it by having doAbc and doXyz return something — zero, a boolean, anything: it doesn't matter as long as they're the same type for both, the result will be thrown away in an ExpressionStatement. But I don't really know why you'd want to; as others have said, this is indeed a case where doing it in an expression is in poor taste and largely pointless.
I think your question is the wrong way round.... the conditional operator was added because the "IF THEN" statement couldn't be used as an evaluation statement.
In my option you should only use the conditional operator when conditionally evaluating as it is inherently less clear than using "IF THEN" constructs when purely implementing a condition.
Conditional operators cannot typically contain blocks of multiple instructions on each condition result, "IF THEN" can.
Given the following idioms:
1)
variable = value1
if condition
variable = value2
2)
variable = value2
if not condition
variable = value1
3)
if condition
variable = value2
else
variable = value1
4)
if not condition
variable = value1
else
variable = value2
Which do you prefer, and why?
We assume the most common execution path to be that of condition being false.
I tend to learn towards using 1), although I'm not exactly sure why I like it more.
Note: The following examples may be simpler—and thus possibly more readable—but not all languages provide such syntax, and they are not suitable for extending the variable assignment to include more than one statement in the future.
variable = condition ? value2 : value1
...
variable = value2 if condition else value1
In theory, I prefer #3 as it avoids having to assign a value to the variable twice. In the real world though I use any of the four above that would be more readable or would express more clearly my intention.
I prefer method 3 because it is more concise and a logical unit. It sets the value only once, it can be moved around as a block, and it's not that error-prone (which happens, esp. in method 1 if setting-to-value1 and checking-and-optionally-setting-to-value2 are separated by other statements)
3) is the clearest expression of what you want to happen. I think all the others require some extra thinking to determine which value is going to end up in the variable.
In practice, I would use the ternary operator (?:) if I was using a language that supported it. I prefer to write in functional or declarative style over imperative whenever I can.
I tend to use #1 alot myself. if condition reads easier than if !condition, especially if you acidentally miss the '!', atleast to my mind atleast.
Most coding I do is in C#, but I still tend to steer clear of the terniary operator, unless I'm working with (mostly) local variables. Lines tend to get long VERY quickly in a ternary operator if you're calling three layers deep into some structure, which quickly decreases the readability again.
Note: The following examples may be simpler—and thus possibly more readable—but not all languages provide such syntax
This is no argument for not using them in languages that do provide such a syntax. Incidentally, that includes all current mainstream languages after my last count.
and they are not suitable for extending the variable assignment to include more than one statement in the future.
This is true. However, it's often certain that such an extension will absolutely never take place because the condition will always yield one of two possible cases.
In such situations I will always prefer the expression variant over the statement variant because it reduces syntactic clutter and improves expressiveness. In other situations I tend to go with the switch statement mentioned before – if the language allows this usage. If not, fall-back to generic if.
switch statement also works. If it's simple and more than 2 or 3 options, that's what I use.
In a situation where the condition might not happen. I would go with 1 or 2. Otherwise its just based on what i want the code to do. (ie. i agree with cruizer)
I tend to use if not...return.
But that's if you are looking to return a variable. Getting disqualifiers out of the way first tends to make it more readable. It really depends on the context of the statement and also the language. A case statement might work better and be readable most of the time, but performance suffers under VB so a series of if/else statements makes more sense in that specific case.
Method 1 or method 3 for me. Method 1 can avoid an extra scope entrance/exit, but method 3 avoids an extra assignment. I'd tend to avoid Method 2 as I try to keep condition logic as simple as possible (in this case, the ! is extraneous as it could be rewritten as method 1 without it) and the same reason applies for method 4.
It depends on what the condition is I'm testing.
If it's an error flag condition then I'll use 1) setting the Error flag to catch the error and then if the condition is successfull clear the error flag. That way there's no chance of missing an error condition.
For everything else I'd use 3)
The NOT logic just adds to confusion when reading the code - well in my head, can't speak for eveyone else :-)
If the variable has a natural default value I would go with #1. If either value is equally (in)appropriate for a default then I would go with #2.
It depends. I like the ternary operators, but sometimes it's clearer if you use an 'if' statement. Which of the four alternatives you choose depends on the context, but I tend to go for whichever makes the code's function clearer, and that varies from situation to situation.
I'm asking with regards to c#, but I assume its the same in most other languages.
Does anyone have a good definition of expressions and statements and what the differences are?
Expression: Something which evaluates to a value. Example: 1+2/x
Statement: A line of code which does something. Example: GOTO 100
In the earliest general-purpose programming languages, like FORTRAN, the distinction was crystal-clear. In FORTRAN, a statement was one unit of execution, a thing that you did. The only reason it wasn't called a "line" was because sometimes it spanned multiple lines. An expression on its own couldn't do anything... you had to assign it to a variable.
1 + 2 / X
is an error in FORTRAN, because it doesn't do anything. You had to do something with that expression:
X = 1 + 2 / X
FORTRAN didn't have a grammar as we know it today—that idea was invented, along with Backus-Naur Form (BNF), as part of the definition of Algol-60. At that point the semantic distinction ("have a value" versus "do something") was enshrined in syntax: one kind of phrase was an expression, and another was a statement, and the parser could tell them apart.
Designers of later languages blurred the distinction: they allowed syntactic expressions to do things, and they allowed syntactic statements that had values.
The earliest popular language example that still survives is C. The designers of C realized that no harm was done if you were allowed to evaluate an expression and throw away the result. In C, every syntactic expression can be a made into a statement just by tacking a semicolon along the end:
1 + 2 / x;
is a totally legit statement even though absolutely nothing will happen. Similarly, in C, an expression can have side-effects—it can change something.
1 + 2 / callfunc(12);
because callfunc might just do something useful.
Once you allow any expression to be a statement, you might as well allow the assignment operator (=) inside expressions. That's why C lets you do things like
callfunc(x = 2);
This evaluates the expression x = 2 (assigning the value of 2 to x) and then passes that (the 2) to the function callfunc.
This blurring of expressions and statements occurs in all the C-derivatives (C, C++, C#, and Java), which still have some statements (like while) but which allow almost any expression to be used as a statement (in C# only assignment, call, increment, and decrement expressions may be used as statements; see Scott Wisniewski's answer).
Having two "syntactic categories" (which is the technical name for the sort of thing statements and expressions are) can lead to duplication of effort. For example, C has two forms of conditional, the statement form
if (E) S1; else S2;
and the expression form
E ? E1 : E2
And sometimes people want duplication that isn't there: in standard C, for example, only a statement can declare a new local variable—but this ability is useful enough that the
GNU C compiler provides a GNU extension that enables an expression to declare a local variable as well.
Designers of other languages didn't like this kind of duplication, and they saw early on that if expressions can have side effects as well as values, then the syntactic distinction between statements and expressions is not all that useful—so they got rid of it. Haskell, Icon, Lisp, and ML are all languages that don't have syntactic statements—they only have expressions. Even the class structured looping and conditional forms are considered expressions, and they have values—but not very interesting ones.
an expression is anything that yields a value: 2 + 2
a statement is one of the basic "blocks" of program execution.
Note that in C, "=" is actually an operator, which does two things:
returns the value of the right hand subexpression.
copies the value of the right hand subexpression into the variable on the left hand side.
Here's an extract from the ANSI C grammar. You can see that C doesn't have many different kinds of statements... the majority of statements in a program are expression statements, i.e. an expression with a semicolon at the end.
statement
: labeled_statement
| compound_statement
| expression_statement
| selection_statement
| iteration_statement
| jump_statement
;
expression_statement
: ';'
| expression ';'
;
http://www.lysator.liu.se/c/ANSI-C-grammar-y.html
An expression is something that returns a value, whereas a statement does not.
For examples:
1 + 2 * 4 * foo.bar() //Expression
foo.voidFunc(1); //Statement
The Big Deal between the two is that you can chain expressions together, whereas statements cannot be chained.
You can find this on wikipedia, but expressions are evaluated to some value, while statements have no evaluated value.
Thus, expressions can be used in statements, but not the other way around.
Note that some languages (such as Lisp, and I believe Ruby, and many others) do not differentiate statement vs expression... in such languages, everything is an expression and can be chained with other expressions.
For an explanation of important differences in composability (chainability) of expressions vs statements, my favorite reference is John Backus's Turing award paper, Can programming be liberated from the von Neumann style?.
Imperative languages (Fortran, C, Java, ...) emphasize statements for structuring programs, and have expressions as a sort of after-thought. Functional languages emphasize expressions. Purely functional languages have such powerful expressions than statements can be eliminated altogether.
Expressions can be evaluated to get a value, whereas statements don't return a value (they're of type void).
Function call expressions can also be considered statements of course, but unless the execution environment has a special built-in variable to hold the returned value, there is no way to retrieve it.
Statement-oriented languages require all procedures to be a list of statements. Expression-oriented languages, which is probably all functional languages, are lists of expressions, or in tha case of LISP, one long S-expression that represents a list of expressions.
Although both types can be composed, most expressions can be composed arbitrarily as long as the types match up. Each type of statement has its own way of composing other statements, if they can do that all. Foreach and if statements require either a single statment or that all subordinate statements go in a statement block, one after another, unless the substatements allow for thier own substatements.
Statements can also include expressions, where an expression doesn't really include any statements. One exception, though, would be a lambda expression, which represents a function, and so can include anything a function can iclude unless the language only allows for limited lambdas, like Python's single-expression lambdas.
In an expression-based language, all you need is a single expression for a function since all control structures return a value (a lot of them return NIL). There's no need for a return statement since the last-evaluated expression in the function is the return value.
Simply: an expression evaluates to a value, a statement doesn't.
Some things about expression based languages:
Most important: Everything returns an value
There is no difference between curly brackets and braces for delimiting code blocks and expressions, since everything is an expression. This doesn't prevent lexical scoping though: A local variable could be defined for the expression in which its definition is contained and all statements contained within that, for example.
In an expression based language, everything returns a value. This can be a bit strange at first -- What does (FOR i = 1 TO 10 DO (print i)) return?
Some simple examples:
(1) returns 1
(1 + 1) returns 2
(1 == 1) returns TRUE
(1 == 2) returns FALSE
(IF 1 == 1 THEN 10 ELSE 5) returns 10
(IF 1 == 2 THEN 10 ELSE 5) returns 5
A couple more complex examples:
Some things, such as some function calls, don't really have a meaningful value to return (Things that only produce side effects?). Calling OpenADoor(), FlushTheToilet() or TwiddleYourThumbs() will return some sort of mundane value, such as OK, Done, or Success.
When multiple unlinked expressions are evaluated within one larger expression, the value of the last thing evaluated in the large expression becomes the value of the large expression. To take the example of (FOR i = 1 TO 10 DO (print i)), the value of the for loop is "10", it causes the (print i) expression to be evaluated 10 times, each time returning i as a string. The final time through returns 10, our final answer
It often requires a slight change of mindset to get the most out of an expression based language, since the fact that everything is an expression makes it possible to 'inline' a lot of things
As a quick example:
FOR i = 1 to (IF MyString == "Hello, World!" THEN 10 ELSE 5) DO
(
LotsOfCode
)
is a perfectly valid replacement for the non expression-based
IF MyString == "Hello, World!" THEN TempVar = 10 ELSE TempVar = 5
FOR i = 1 TO TempVar DO
(
LotsOfCode
)
In some cases, the layout that expression-based code permits feels much more natural to me
Of course, this can lead to madness. As part of a hobby project in an expression-based scripting language called MaxScript, I managed to come up with this monster line
IF FindSectionStart "rigidifiers" != 0 THEN FOR i = 1 TO (local rigidifier_array = (FOR i = (local NodeStart = FindsectionStart "rigidifiers" + 1) TO (FindSectionEnd(NodeStart) - 1) collect full_array[i])).count DO
(
LotsOfCode
)
I am not really satisfied with any of the answers here. I looked at the grammar for C++ (ISO 2008). However maybe for the sake of didactics and programming the answers might suffice to distinguish the two elements (reality looks more complicated though).
A statement consists of zero or more expressions, but can also be other language concepts. This is the Extended Backus Naur form for the grammar (excerpt for statement):
statement:
labeled-statement
expression-statement <-- can be zero or more expressions
compound-statement
selection-statement
iteration-statement
jump-statement
declaration-statement
try-block
We can see the other concepts that are considered statements in C++.
expression-statements is self-explaining (a statement can consist of zero or more expressions, read the grammar carefully, it's tricky)
case for example is a labeled-statement
selection-statements are if if/else, case
iteration-statements are while, do...while, for (...)
jump-statements are break, continue, return (can return expression), goto
declaration-statement is the set of declarations
try-block is statement representing try/catch blocks
and there might be some more down the grammar
This is an excerpt showing the expressions part:
expression:
assignment-expression
expression "," assignment-expression
assignment-expression:
conditional-expression
logical-or-expression assignment-operator initializer-clause
throw-expression
expressions are or contain often assignments
conditional-expression (sounds misleading) refers to usage of the operators (+, -, *, /, &, |, &&, ||, ...)
throw-expression - uh? the throw clause is an expression too
The de-facto basis of these concepts is:
Expressions: A syntactic category whose instance can be evaluated to a value.
Statement: A syntactic category whose instance may be involved with evaluations of an expression and the resulted value of the evaluation (if any) is not guaranteed available.
Besides to the very initial context for FORTRAN in the early decades, both definitions of expressions and statements in the accepted answer are obviously wrong:
Expressions can be unvaluated operands. Values are never produced from them.
Subexpressions in non-strict evaluations can be definitely unevaluated.
Most C-like languages have the so-called short-circuit evaluation rules to conditionally skip some subexpression evaluations not change the final result in spite of the side effects.
C and some C-like languages have the notion of unevaluated operand which may be even normatively defined in the language specification. Such constructs are used to avoid the evaluations definitely, so the remained context information (e.g. types or alignment requirements) can be statically distinguished without changing the behavior after the program translation.
For example, an expression used as the operand of the sizeof operator is never evaluated.
Statements have nothing to do with line constructs. They can do something more than expressions, depending on the language specifications.
Modern Fortran, as the direct descendant of the old FORTRAN, has concepts of executable statements and nonexecutable statements.
Similarly, C++ defines declarations as the top-level subcategory of a translation unit. A declaration in C++ is a statement. (This is not true in C.) There are also expression-statements like Fortran's executable statements.
To the interest of the comparison with expressions, only the "executable" statements matter. But you can't ignore the fact that statements are already generalized to be constructs forming the translation units in such imperative languages. So, as you can see, the definitions of the category vary a lot. The (probably) only remained common property preserved among these languages is that statements are expected to be interpreted in the lexical order (for most users, left-to-right and top-to-bottom).
(BTW, I want to add [citation needed] to that answer concerning materials about C because I can't recall whether DMR has such opinions. It seems not, otherwise there should be no reasons to preserve the functionality duplication in the design of C: notably, the comma operator vs. the statements.)
(The following rationale is not the direct response to the original question, but I feel it necessary to clarify something already answered here.)
Nevertheless, it is doubtful that we need a specific category of "statements" in general-purpose programming languages:
Statements are not guaranteed to have more semantic capabilities over expressions in usual designs.
Many languages have already successfully abandon the notion of statements to get clean, neat and consistent overall designs.
In such languages, expressions can do everything old-style statements can do: just drop the unused results when the expressions are evaluated, either by leaving the results explicitly unspecified (e.g. in RnRS Scheme), or having a special value (as a value of a unit type) not producible from normal expression evaluations.
The lexical order rules of evaluation of expressions can be replaced by explicit sequence control operator (e.g. begin in Scheme) or syntactic sugar of monadic structures.
The lexical order rules of other kinds of "statements" can be derived as syntactic extensions (using hygienic macros, for example) to get the similar syntactic functionality. (And it can actually do more.)
On the contrary, statements cannot have such conventional rules, because they don't compose on evaluation: there is just no such common notion of "substatement evaluation". (Even if any, I doubt there can be something much more than copy and paste from existed rules of evaluation of expressions.)
Typically, languages preserving statements will also have expressions to express computations, and there is a top-level subcategory of the statements preserved to expression evaluations for that subcategory. For example, C++ has the so-called expression-statement as the subcategory, and uses the discarded-value expression evaluation rules to specify the general cases of full-expression evaluations in such context. Some languages like C# chooses to refine the contexts to simplify the use cases, but it bloats the specification more.
For users of programming languages, the significance of statements may confuse them further.
The separation of rules of expressions and statements in the languages requires more effort to learn a language.
The naive lexical order interpretation hides the more important notion: expression evaluation. (This is probably most problematic over all.)
Even the evaluations of full expressions in statements are constraint with the lexical order, subexpressions are not (necessarily). Users should ultimately learn this besides any rules coupled to the statements. (Consider how to make a newbie get the point that ++i + ++i is meaningless in C.)
Some languages like Java and C# further constraints the order of evaluations of subexpressions to be permissive of ignorance of evaluation rules. It can be even more problematic.
This seems overspecified to users who have already learned the idea of expression evaluation. It also encourages the user community to follow the blurred mental model of the language design.
It bloats the language specification even more.
It is harmful to optimization by missing the expressiveness of nondeterminism on evaluations, before more complicated primitives are introduced.
A few languages like C++ (particularly, C++17) specify more subtle contexts of evaluation rules, as a compromise of the problems above.
It bloats the language specification a lot.
This goes totally against to simplicity to average users...
So why statements? Anyway, the history is already a mess. It seems most language designers do not take their choice carefully.
Worse, it even gives some type system enthusiasts (who are not familiar enough with the PL history) some misconceptions that type systems must have important things to do with the more essential designs of rules on the operational semantics.
Seriously, reasoning depending on types are not that bad in many cases, but particularly not constructive in this special one. Even experts can screw things up.
For example, someone emphasizes the well-typing nature as the central argument against the traditional treatment of undelimited continuations. Although the conclusion is somewhat reasonable and the insights about composed functions are OK (but still far too naive to the essense), this argument is not sound because it totally ignores the "side channel" approach in practice like _Noreturn any_of_returnable_types (in C11) to encode Falsum. And strictly speaking, an abstract machine with unpredictable state is not identical to "a crashed computer".
A statement is a special case of an expression, one with void type. The tendency of languages to treat statements differently often causes problems, and it would be better if they were properly generalized.
For example, in C# we have the very useful Func<T1, T2, T3, TResult> overloaded set of generic delegates. But we also have to have a corresponding Action<T1, T2, T3> set as well, and general purpose higher-order programming constantly has to be duplicated to deal with this unfortunate bifurcation.
Trivial example - a function that checks whether a reference is null before calling onto another function:
TResult IfNotNull<TValue, TResult>(TValue value, Func<TValue, TResult> func)
where TValue : class
{
return (value == null) ? default(TValue) : func(value);
}
Could the compiler deal with the possibility of TResult being void? Yes. All it has to do is require that return is followed by an expression that is of type void. The result of default(void) would be of type void, and the func being passed in would need to be of the form Func<TValue, void> (which would be equivalent to Action<TValue>).
A number of other answers imply that you can't chain statements like you can with expressions, but I'm not sure where this idea comes from. We can think of the ; that appears after statements as a binary infix operator, taking two expressions of type void and combining them into a single expression of type void.
Statements -> Instructions to follow sequentially
Expressions -> Evaluation that returns a value
Statements are basically like steps, or instructions in an algorithm, the result of the execution of a statement is the actualization of the instruction pointer (so-called in assembler)
Expressions do not imply and execution order at first sight, their purpose is to evaluate and return a value. In the imperative programming languages the evaluation of an expression has an order, but it is just because of the imperative model, but it is not their essence.
Examples of Statements:
for
goto
return
if
(all of them imply the advance of the line (statement) of execution to another line)
Example of expressions:
2+2
(it doesn't imply the idea of execution, but of the evaluation)
Statement,
A statement is a procedural building-block from which all C# programs are constructed. A statement can declare a local variable or constant, call a method, create an object, or assign a value to a variable, property, or field.
A series of statements surrounded by curly braces form a block of code. A method body is one example of a code block.
bool IsPositive(int number)
{
if (number > 0)
{
return true;
}
else
{
return false;
}
}
Statements in C# often contain expressions. An expression in C# is a fragment of code containing a literal value, a simple name, or an operator and its operands.
Expression,
An expression is a fragment of code that can be evaluated to a single value, object, method, or namespace. The two simplest types of expressions are literals and simple names. A literal is a constant value that has no name.
int i = 5;
string s = "Hello World";
Both i and s are simple names identifying local variables. When those variables are used in an expression, the value of the variable is retrieved and used for the expression.
I prefer the meaning of statement in the formal logic sense of the word. It is one that changes the state of one or more of the variables in the computation, enabling a true or false statement to be made about their value(s).
I guess there will always be confusion in the computing world and science in general when new terminology or words are introduced, existing words are 'repurposed' or users are ignorant of the existing, established or 'proper' terminology for what they are describing
Here is the summery of one of the simplest answer I found.
originally Answered by Anders Kaseorg
A statement is a complete line of code that performs some action, while an expression is any section of the code that evaluates to a value.
Expressions can be combined “horizontally” into larger expressions using operators, while statements can only be combined “vertically” by writing one after another, or with block constructs.
Every expression can be used as a statement (whose effect is to evaluate the expression and ignore the resulting value), but most statements cannot be used as expressions.
http://www.quora.com/Python-programming-language-1/Whats-the-difference-between-a-statement-and-an-expression-in-Python
Statements are grammatically complete sentences. Expressions are not. For example
x = 5
reads as "x gets 5." This is a complete sentence. The code
(x + 5)/9.0
reads, "x plus 5 all divided by 9.0." This is not a complete sentence. The statement
while k < 10:
print k
k += 1
is a complete sentence. Notice that the loop header is not; "while k < 10," is a subordinating clause.
In a statement-oriented programming language, a code block is defined as a list of statements. In other words, a statement is a piece of syntax that you can put inside a code block without causing a syntax error.
Wikipedia defines the word statement similarly
In computer programming, a statement is a syntactic unit of an imperative programming language that expresses some action to be carried out. A program written in such a language is formed by a sequence of one or more statements
Notice the latter statement. (although "a program" in this case is technically wrong because both C and Java reject a program that consists of nothing of statements.)
Wikipedia defines the word expression as
An expression in a programming language is a syntactic entity that may be evaluated to determine its value
This is, however, false, because in Kotlin, throw new Exception("") is an expression but when evaluated, it simply throws an exception, never returning any value.
In a statically typed programming language, every expression has a type. This definition, however, doesn't work in a dynamically typed programming language.
Personally, I define an expression as a piece of syntax that can be composed with an operator or function calls to yield a bigger expression. This is actually similar to the explanation of expression by Wikipedia:
It is a combination of one or more constants, variables, functions, and operators that the programming language interprets (according to its particular rules of precedence and of association) and computes to produce ("to return", in a stateful environment) another value
But, the problem is in C programming language, given a function executeSomething like this:
void executeSomething(void){
return;
}
Is executeSomething() an expression or is it a statement? According to my definition, it is a statement because as defined in Microsoft's C reference grammar,
You cannot use the (nonexistent) value of an expression that has type void in any way, nor can you convert a void expression (by implicit or explicit conversion) to any type except void
But the same page clearly indicates that such syntax is an expression.
A statement is a block of code that doesn't return anything and which is just a standalone unit of execution. For example-
if(a>=0)
printf("Hello Humen,I'm a statement");
An expression, on the other hand, returns or evaluates a new value. For example -
if(a>=0)
return a+10;//This is an expression because it evalutes an new value;
or
a=10+y;//This is also an expression because it returns a new value.
Expression
A piece of syntax which can be evaluated to some value. In other words, an expression is an accumulation of expression elements like literals, names, attribute access, operators or function calls which all return a value. In contrast to many other languages, not all language constructs are expressions. There are also statements which cannot be used as expressions, such as while. Assignments are also statements, not expressions.
Statement
A statement is part of a suite (a “block” of code). A statement is either an expression or one of several constructs with a keyword, such as if, while or for.
To improve on and validate my prior answer, definitions of programming language terms should be explained from computer science type theory when applicable.
An expression has a type other than the Bottom type, i.e. it has a value. A statement has the Unit or Bottom type.
From this it follows that a statement can only have any effect in a program when it creates a side-effect, because it either can not return a value or it only returns the value of the Unit type which is either nonassignable (in some languages such a C's void) or (such as in Scala) can be stored for a delayed evaluation of the statement.
Obviously a #pragma or a /*comment*/ have no type and thus are differentiated from statements. Thus the only type of statement that would have no side-effects would be a non-operation. Non-operation is only useful as a placeholder for future side-effects. Any other action due to a statement would be a side-effect. Again a compiler hint, e.g. #pragma, is not a statement because it has no type.
Most precisely, a statement must have a "side-effect" (i.e. be imperative) and an expression must have a value type (i.e. not the bottom type).
The type of a statement is the unit type, but due to Halting theorem unit is fiction so lets say the bottom type.
Void is not precisely the bottom type (it isn't the subtype of all possible types). It exists in languages that don't have a completely sound type system. That may sound like a snobbish statement, but completeness such as variance annotations are critical to writing extensible software.
Let's see what Wikipedia has to say on this matter.
https://en.wikipedia.org/wiki/Statement_(computer_science)
In computer programming a statement is the smallest standalone element of an imperative programming language that expresses some action to be carried out.
Many languages (e.g. C) make a distinction between statements and definitions, with a statement only containing executable code and a definition declaring an identifier, while an expression evaluates to a value only.