I have a stored procedure snippet like this
CREATE DEFINER=`root`#`%` PROCEDURE `new_procedure`()
BEGIN
DECLARE c_id varchar(100) DEFAULT "";
DECLARE cursor1 CURSOR for select id from t1 where name like 's%';
OPEN cursor1;
get_t1: LOOP
FETCH cursor1 into c_id;
p:begin
declare cursor2 cursor for select id from t2 where cl_id=c_id;
open cursor2;
get_t2: loop
fetch project_cursor into p_id;
// perform some tasks
t:begin
declare cursor3 cursor for select id from t3 where pr_id=p_id;
open cursor3;
get_t3:loop
fetch cursor3 into t_id;
IF v_finished = 1 THEN
LEAVE get_t3;
END IF;
//perform some tasks
close cursor3;
select p_id;
end t;
end loop t2;
end p;
END LOOP t1;
END
here select statement is not displaying any data
when i write select under cursor 3 it is working.
did i made any mistake? anything I missed
Some basic logic has been added in your SP, Try it whether this is what you are expecting.
CREATE DEFINER=`root`#`%` PROCEDURE `new_procedure`()
BEGIN
DECLARE c_id VARCHAR(100) DEFAULT "";
DECLARE done1 BOOLEAN DEFAULT FALSE;
DECLARE cursor1 CURSOR FOR SELECT id FROM t1 WHERE name LIKE 's%';
DECLARE CONTINUE HANDLER FOR NOT FOUND SET done1=TRUE;
OPEN cursor1;
GET_T1: LOOP
FETCH cursor1 INTO c_id;
IF done1 THEN
LEAVE GET_T1;
END IF;
P:BEGIN
DECLARE p_id INT ; -- check which data types suits you, might be int
DECLARE done2 BOOLEAN DEFAULT FALSE;
DECLARE cursor2 CURSOR FOR SELECT id FROM t2 WHERE cl_id=c_id;
DECLARE CONTINUE HANDLER FOR NOT FOUND SET done2=TRUE;
OPEN cursor2;
GET_T2: LOOP
FETCH cursor2 INTO p_id;
IF done2 THEN
LEAVE GET_T2;
END IF;
/* perform some task */
T:BEGIN
DECLARE t_id INT ; -- check which data types suits you, might be int
DECLARE done3 BOOLEAN DEFAULT FALSE;
DECLARE cursor3 CURSOR FOR SELECT id FROM t3 WHERE pr_id=p_id;
DECLARE CONTINUE HANDLER FOR NOT FOUND SET done3=TRUE;
OPEN cursor3;
GET_T3:LOOP
FETCH cursor3 INTO t_id;
IF done3 THEN
LEAVE GET_T3;
END IF;
/* perform some tasks */
#select p_id; -- don't know what you are doing with this
END LOOP GET_T3;
CLOSE cursor3;
SET done3=FALSE;
END T;
END LOOP GET_T2;
CLOSE cursor2;
SET done2= FALSE;
END P;
END LOOP GET_T1;
CLOSE cursor1;
SET done1= FALSE;
END
Why both my variables output NULL? SELECT part of the cursor is working properly.
CREATE PROCEDURE p2()
BEGIN
# Account table
DECLARE accountid INT;
DECLARE accountname VARCHAR(1000);
# 1. cursor finished/done variable comes first
DECLARE done INT DEFAULT 0;
# 2. the curser declaration and select
DECLARE c_account_id_name CURSOR FOR SELECT
accountid,
accountname
FROM temp.test;
# 3. the continue handler is defined last
DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET done = TRUE;
OPEN c_account_id_name;
SET accountid = 0;
SET accountname = '';
read_loop: LOOP
FETCH c_account_id_name
INTO accountid, accountname;
IF done
THEN
LEAVE read_loop;
END IF;
SELECT accountname;
END LOOP;
END;
Variable and select attribute in cursor can't be the same...it's a MySQL bug.
This will work
DROP PROCEDURE IF EXISTS p2;
DELIMITER $$
CREATE PROCEDURE p2()
BEGIN
# Account table
DECLARE v_accountidsome INT; #pay attention
DECLARE v_accountnameelst VARCHAR(1000); #pay attention
# 1. cursor finished/done variable comes first
DECLARE v_done INT DEFAULT FALSE;
# 2. the cursor declaration and select
DECLARE c_account_id_name CURSOR FOR SELECT
accountid, #pay attention
accountname #pay attention
FROM temp.test;
# 3. the continue handler is defined last
DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET v_done = TRUE;
OPEN c_account_id_name;
read_loop: LOOP
FETCH c_account_id_name
INTO v_accountidsome, v_accountnameelst;
IF v_done
THEN
LEAVE read_loop;
END IF;
SELECT v_accountidsome;
SELECT v_accountnameelst;
END LOOP;
CLOSE c_account_id_name;
END $$
DELIMITER ;
CALL p2();
Find more here
i am trying to nest two cursors.however i am getting syntax for line "declare no_more rows boolean:=FALSE".i am using phpMyAdmin and running in this on MySQL console. Also can i do this without declaring stored procedure? please help me out here. this thing is breaking my head past three days. following is the best code i could write:
Delimiter $$
create procedure test1()
BEGIN
BLOCK1: begin
declare v_col1 int(10);
declare no_more_rows boolean1 := FALSE;
declare cursor1 cursor for
select content_id
from topic_list where topic_id=1;
declare continue handler for not found
set no_more_rows1 := TRUE;
open cursor1;
LOOP1: loop
fetch cursor1
into v_col1;
if no_more_rows1 then
close cursor1;
leave LOOP1;
end if;
BLOCK2: begin
declare v_col2 int(10);
declare no_more_rows2 boolean := FALSE;
declare cursor2 cursor for
select content_id
from content_upvotes
where u_id_upvoter = v_col1;
declare continue handler for not found
set no_more_rows2 := TRUE;
open cursor2;
LOOP2: loop
fetch cursor2
into v_col2;
if no_more_rows then
close cursor2;
leave LOOP2;
end if;
end loop LOOP2;
end BLOCK2;
end loop LOOP1;
end BLOCK1;
end $$
DELIMITER ;
If you check mysql's documentation on declare syntax, xou can see that the defsult value is set using the DEFAULT keyword, not the asdignment operator:
DECLARE var_name [, var_name] ... type [DEFAULT value]
So, your declaration should be
declare no_more_rows tinyint(1) default 0;
I also mapped the boolean type to tinyint(1).
According to this answer Call a stored procedure for each row returned by a query in MySQL described as following:
CREATE PROCEDURE foo() BEGIN
DECLARE done BOOLEAN DEFAULT FALSE;
DECLARE _id BIGINT UNSIGNED;
DECLARE cur CURSOR FOR SELECT id FROM objects WHERE ...;
DECLARE CONTINUE HANDLER FOR NOT FOUND SET done := TRUE;
OPEN cur;
testLoop: LOOP
FETCH cur INTO _id;
IF done THEN
LEAVE testLoop;
END IF;
CALL testProc(_id);
END LOOP testLoop;
CLOSE cur;
END
How can i set a variable and increment it over each iteration?
The following code does't work and I don't know why.
CREATE PROCEDURE foo() BEGIN
DECLARE done BOOLEAN DEFAULT FALSE;
DECLARE _id BIGINT UNSIGNED;
DECLARE counter INT DEFAULT 0;
DECLARE cur CURSOR FOR SELECT id FROM objects WHERE ...;
DECLARE CONTINUE HANDLER FOR NOT FOUND SET done := TRUE;
OPEN cur;
testLoop: LOOP
FETCH cur INTO _id;
IF done THEN
LEAVE testLoop;
END IF;
CALL testProc(_id);
counter = counter + 1;
END LOOP testLoop;
CLOSE cur;
END
I have following code: Problem is on the last row of creature_y loop doesn't end and inserts same values (with increased guid) infinitely.
I tried few ways with changing continue handler but seems it is not that.
DELIMITER $$
DROP PROCEDURE IF EXISTS creature_copy
$$
CREATE PROCEDURE creature_copy ()
BEGIN
DECLARE done INT DEFAULT 0;
DECLARE new_guid INT(10);
-- Creature definition
DECLARE y_guid INT(10);
DECLARE y_id mediumint(8);
DECLARE y_map int(5);
DECLARE y_modelid mediumint(8);
DECLARE y_position_x float(10);
DECLARE y_position_y float(10);
DECLARE y_position_z float(10);
DECLARE y_orientation float(10);
DECLARE y_spawntimesecs INT(10);
DECLARE y_curhealth INT(10);
DECLARE y_curmana INT(10);
DECLARE y_MovementType tinyint(3);
-- waypoints definition
DECLARE w_id INT(10);
DECLARE w_point mediumint(8);
DECLARE w_position_x float(10);
DECLARE w_position_y float(10);
DECLARE w_position_z float(10);
DECLARE w_orientation float(10);
-- Generate creatures map
DECLARE creature_sel CURSOR FOR
SELECT guid,id, map, modelid, position_x, position_y, position_z, orientation, spawntimesecs, curhealth, curmana, MovementType
FROM creature_y;
-- Generate waypoints map
DECLARE waypoint_sel CURSOR FOR
SELECT id, point, position_x, position_y, position_z, orientation
FROM creature_movement
WHERE creature_movement.id = y_guid;
DECLARE CONTINUE HANDLER FOR NOT FOUND SET done = 1;
OPEN creature_sel;
-- Cleanup tables before re-running
TRUNCATE creature_t;
TRUNCATE waypoint_data;
-- Set starting guid before loop
SET new_guid = 504115;
creature_loop:LOOP
if done = 1 THEN
-- set done = 0;
CLOSE creature_sel;
LEAVE creature_loop;
end if;
SET new_guid = new_guid + 1;
FETCH creature_sel INTO y_guid, y_id, y_map, y_modelid, y_position_x, y_position_y, y_position_z, y_orientation, y_spawntimesecs, y_curhealth, y_curmana, y_MovementType;
INSERT INTO creature_t(guid, id, map, modelid, position_x, position_y, position_z, orientation, spawntimesecs, curhealth, curmana, MovementType) VALUES(new_guid, y_id, y_map, y_modelid, y_position_x, y_position_y, y_position_z, y_orientation, y_spawntimesecs, y_curhealth, y_curmana, y_MovementType);
OPEN waypoint_sel;
waypoint_loop:LOOP
FETCH waypoint_sel INTO w_id, w_point, w_position_x, w_position_y, w_position_z, w_orientation;
IF done = 1 THEN
SET done = 0;
LEAVE waypoint_loop ;
END IF;
INSERT INTO waypoint_data(id, point, position_x, position_y, position_z, orientation) VALUES (new_guid, w_point, w_position_x, w_position_y, w_position_z, w_orientation);
END LOOP waypoint_loop;
CLOSE waypoint_sel;
END LOOP creature_loop;
CLOSE creature_sel;
END;
I have found solution to this.
To use 2 different continue handlers (to see whether cursor is at end) you need to split code into blocks
BLOCK1: BEGIN
DECLARE done INT DEFAULT 0;
-- First cursor
DECLARE sel CURSOR FOR
SELECT column
FROM table;
DECLARE CONTINUE HANDLER FOR NOT FOUND SET done = 1;
OPEN sel;
sel_loop:LOOP
if done = 1 THEN
set done = 0;
CLOSE sel;
LEAVE sel_loop;
end if;
FETCH sel INTO variable1;
-- Do something in loop
-- Start second code-block
BLOCK2: BEGIN
DECLARE done2 INT DEFAULT 0;
-- define second cursor
DECLARE sel2 CURSOR FOR
SELECT column
FROM table
WHERE column = condition;
-- define second handler
DECLARE CONTINUE HANDLER FOR NOT FOUND SET done2 = 1;
-- now you can make second cursor loop and it will finish properly.
OPEN sel2;
sel2_loop:LOOP
FETCH sel2 INTO variable2;
IF done2 = 1 THEN
SET done2 = 0;
LEAVE sel2_loop ;
END IF;
-- do something in second loop
END LOOP waypoint_loop;
CLOSE waypoint_sel;
-- End your code blocks and close first loop / cursor
END BLOCK2;
END LOOP sel_loop;
CLOSE sel;
END BLOCK1