I have received ib_logfile0 file.
Now I want to read the file. How can I do the same?
Main motive behind this is somehow I need to understand the schema for the list of tables that ib_logfile0 is tagged to. Is it worth putting efforts reading this file for the purpose mentioned.
Thanks for your time.
Thanks and Regards,
SachinJadhav.
ib_logfile0 is a redo log used for crash recovery. It contains a log of commited transactions that haven't been applied to the tablespaces.
It is important to keep this file, its not some throw away item and its contents a vitally important to the operation of innodb.
The contents aren't simple, and due to the abstraction probably not worth spending time on. In addition to the official docs, Jeremy Cole did a blog series, possibly a bit dated now, and set of tools to read files. Failing that there is always the source code.
The following command will give you a list of table names and some garbage too, but you should be able to recognize the table names it applies to.
strings ib_logfile0
Related
I accidentally truncated my table from online server and I wasn't able to back up it. Please anyone help me on what should I do.
Most viable, least work:
From a backup
Check again if you have one
Ask your hoster if they do backups; their default configuration for some setups might include a backup that you are unaware of, e.g. a database backup for wordpress or a file backup if you have a vm
Viable in some situations, little work if applicable:
From binary logs. Check if they are enabled (maybe as part of your hosters default configuration, also maybe only the hoster can access them, so you may need to ask them). They contain the most recent changes to your database, and, if you are lucky, "recent" might be long enough to include everything
Less viable, more work:
Try to recover from related data, e.g. history tables, other related tables or log files (e.g. the mysql general query log or log files that your application created); you can try to analyze them to figure out what should be in your table
Least viable, most work, most expensive:
In theory, since the data is still stored on the harddrive until it is overwritten by new data, you can try to recover the data, similar to tools that find lost blocks or deleted files on your harddrive
You need to stop any activity on your harddrive to increase probability of success. This will depend on your configuration and setup. E.g., in shared hosting, freed diskspace might be overwritten by other users beyond you control, on the other hand, if you are using innodb and disabled innodb_file_per_table, the data is stored in a single file (and the disk space is not freed), so stopping your mysql server should prevent any remaining recoverable data from being overwritten.
While there are some tools to help you with that, you will likely have to pay someone to do it for you (and even then you only get back the data that hasn't been overwritten so far), so this option is most likely only viable if your data is very valuable
I read somewhere that it is, so I was wondering.
Don't do that, the .frm/.myd/.myi may be much larger than the actual data and may cause crash (data not consistence) or very hard to transfrom/recover.
Use mysqldump to transfer MySQL database.
It might or might not work, depending on the state of the data.
it should work if you stop the database completely and restart it again after the backup, but there you have a downtime.
A slightly more detailed response at askers request.
Some details of the dangers of a straight file copy:
If the database is live the database might change some of the files
before others so when you copy them you copy them you may get copies
in that are inconsistent with each other. If the database is offline
this method is probably reliable.
Advantages of using the documented methods:
Should work on future version of DBMS
Should work consistently across underlying engines
Always a consistent snapshot like copy
Is it possible to restore table to last time with data if all data was deleted accidentally.
There is another solution, if you have binary logs active on your server you can use mysqlbinlog
generate a sql file with it
mysqlbinlog binary_log_file > query_log.sql
then search for your missing rows.
If you don't have it active, no other solution. Make backups next time.
Sort of. Using phpMyAdmin I just deleted one row too many. But I caught it before I proceeded and had most of the data from the delete confirmation message. I was able to rebuild the record. But the confirmation message truncated some of a text comment.
Someone more knowledgeable than I regarding phpMyAdmin may know of a setting so that you can get a more complete echo of the delete confirmation message. With a complete delete message available, if you slow down and catch your error, you can restore the whole record.
(PS This app also sends an email of the submission that creates the record. If the client has a copy, I will be able to restore the record completely)
As Mitch mentioned, backing data up is the best method.
However, it maybe possible to extract the lost data partially depending on the situation or DB server used. For most part, you are out of luck if you don't have any backup.
I'm sorry, bu it's not posible, unless you made a backup file earlier.
EDIT: Actually it is possible, but it gets very tricky and you shouldn't think about it if data wasn't really, really important. You see: when data get's deleted from a computer it still remains in the same place on the disk, only its sectors are marked as empty. So data remains intact, except if it gets overwritten by new data. There are several programs designed for this purpose and there are companies who specialize in data recovery, though they are rather expensive.
For InnoDB tables, Percona has a recovery tool which may help. It is far from fail-safe or perfect, and how fast you stopped your MySQL server after the accidental deletes has a major impact. If you're quick enough, changes are you can recover quite a bit of data, but recovering all data is nigh impossible.
Of cours, proper daily backups, binlogs, and possibly a replication slave (which won't help for accidental deletes but does help in case of hardware failure) are the way to go, but this tool could enable you to save as much data as possible when you did not have those yet.
No this is not possible. The only solution will be to have regular backups. This is very important.
Unfortunately, no. If you were running the server in default config, go get your backups (you have backups, right?) - generally, a database doesn't keep previous versions of your data, or a revision of changes: only the current state.
(Alternately, if you have deleted the data through a custom frontend, it is quite possible that the frontend doesn't actually issue a DELETE: many tables have a is_deleted field or similar, and this is simply toggled by the frontend. Note that this is a "soft delete" implemented in the frontend app - the data is not actually deleted in such cases; if you actually issued a DELETE, TRUNCATE or a similar SQL command, this is not applicable.)
If you use MyISAM tables, then you can recover any data you deleted, just
open file: mysql/data/[your_db]/[your_table].MYD
with any text editor
I just spend a few hours putting together a table full of data, and just decided to drop a WP installation in the same database. I expected WordPress to leave my table as it was and simply add the WP_* tables, but apparently the install wiped my database before installing the wordpress tables.
I have full access to the server root. Is there any way for me to recover this table?
I'm sorry, but that can't be done. Once a table is truncated or dropped everything is gone.
The only way to get it back would be recovering the database files from the disk, but that is not very reliable. To do that, you first have to find out where the MySQL's data files are (see this), then try using a file recovery tool to get them back. Good luck.
Another one who learns to back up the hard way.
If tables were MyISAM, then I agree with NullUserException - you can't recover the tables. Well, the chance is very slim.
If InnoDB - check out my presentation on slideshare - there is a tool to extract records from raw bytes stream - percona data recovery toolkit. There are examples in the presentation, your scenario is pretty much typical.
UPDATE: Data recovery toolkit moved to GitHub
I managed to wipe a server by mistake but PhotoRec was kind enough to recover the .frm and .myi files from the hard drive. I now have a desktop set up with the same version of MySQL to recover the data but my question is: what do I do? I have about 160 of these files. I haven't yet reinstalled the server in case I need anything else.
Also, as I'm using PhotoRec, it doesn't provide the original filenames. If this is important, how can I get the raw data out of the files and manually rebuild the database?
Edit: I managed to get ahold of the PhotoRec source and add the capability to recover the .myd files (which a bit of digging reveals to be the actual data files), but I can't get the thing to compile, and it ain't because of my mods! Can anyone help with a 'No rule to make target' error in PhotoRec? file_http.o's the culprit.
Thanks,
Rob
MYI files are useless, these are files with secondary indexes, not your data.
PhotoRec is a nice tool, I used it a lot for multimedia recovery etc. Although it claims MYD support it never worked for me. I doubt it possibly can extract MYD files.
I dont belive you can, photorec does not support MYD, im doing an attempt with ext3grep but it always segfaults.
just posting this so someone doesnt spend time better spent on using photorec for this purpose.