As part of my Webistrano deployment, I need to check if Glassfish home is set on the target machine.
I've tried the following in jrails.rb, none of which outputs the value of Glassfish home:
echo $GLASSFISH_HOME
echo ['GLASSFISH_HOME']
Of course, glassfish home is set on the target machine (in .bashrc and /etc/profile).
I even tried invoking a script through Webistrano to echo $GLASSFISH_HOME into a file (on target machine). The file does not have the value!
Looks like through Webistrano, I cannot access the local environment of the target machine.
Please help!
Cheers,
Savinder
echo $GLASSFISH_HOME
As simple as that!!!
Related
Good afternoon friends, I need to disable "tcp_timestamps" in ebs for a security test. I created an environment for the test, my ".ebextesions" doesn't work. I looked at the aws doc, I created a directory with the name my-app, one with the name .ebextesions and then the file "disable_tcp_timestamps" with the configuration content.
It didn't work the tcp is still active, can you help me?
I used this config
commands:
01_disable_timestamp:
command: echo "0" > /proc/sys/net/ipv4/tcp_timestamps
I have tried to implement - https://github.com/Autodesk-Forge/forge-bim360-data.connector.dashboard
I have updated this part - npm install set FORGE_CLIENT_ID=<<YOUR CLIENT ID FROM DEVELOPER PORTAL>> set FORGE_CLIENT_SECRET=<<YOUR CLIENT SECRET>> set FORGE_CALLBACK_URL=<<your callback url of Forge e.g. http://localhost:3000/oauth/callback>> set DC_CALLBACK_URL=<<"your ngrok address here: e.g. http://abcd1234.ngrok.io/job/callback">>
I am getting the error that 400-Unknown or invalid client_id
Firstly, I rarely used Windows OS now. I simply copied the guideline of setting environment variables from other samples, while most time, I tried with debug mode (setting environment variables in launch.json) .
checking the Readme again, I found the wording is:
Windows (use Node.js command line from Start menu)
i.e. it asks to input those commands to command line of Node.js, instead of terminal of VSCode! That is why it always reports the error of client id is not defined because the variables are not set to environment at all.
The correct way is to open the command line of Node.js, and run the commands. This is a screenshot.
I'm working on a Perl6 project, but having difficulty connecting to MySQL. Even when using the DBIish (or perl6.org tutorial) example code, the connection fails. Any suggestions or advice is appreciated! User credentials have been confirmed accurate too.
I'm running this on Windows 10 with MySQL Server 8.0 and standard Perl6 with Rakudo Star. I have tried modifying the connection string in numerous ways like :$password :password<> :password() etc. but can't get a connection established. Also should note that I have the ODBC, C, C++, and.Net connectors installed.
#!/usr/bin/perl6
use v6.c;
use lib 'lib';
use DBIish;
use Register::User;
# Windows support
%*ENV<DBIISH_MYSQL_LIB> = "C:/Program Files/MySQL/MySQL Server 8.0/liblibmysql.dll"
if $*DISTRO.is-win;
my $dbh = DBIish.connect('mysql', :host<localhost>, :port(3306), :database<dbNameHere>, :user<usernameHere>, :password<pwdIsHere>) or die "couldn't connect to database";
my $sth = $dbh.prepare(q:to/STATEMENT/);
SELECT *
FROM users
STATEMENT
$sth.execute();
my #rows = $sth.allrows();
for #rows { .print }
say #rows.elems;
$sth.finish;
$dbh.dispose;
This should be connecting to the DB. Then the app runs a query, followed by printing out each resulting row. What actually happens is the application hits the 'die' message every time.
This is more of a work around, but being unable to use use a DB is crippling. So even when trying to use the NativeLibs I couldn't get a connection via DBIish. Instead I have opted to using DB::MySQL which is proving to be quite helpful. With a few lines of code this module has your DB needs covered:
use DB::MySQL;
my $mysql = DB::MySQL.new(:database<databaseName>, :user<userName>, :password<passwordHere>);
my #users = $mysql.query('select * from users').arrays;
for #users { say "user #$_[0]: $_[1] $_[2]"; }
#Results would be:
#user #1: FirstName LastName
#user #2: FirstName LastName
#etc...
This will print out a line for each user formatted as shown above. It's not as familiar as DBIish, but this module gets the job done as needed. There's plenty more you can do with it to, so I highly recommend reading the docs.
According to this github DBIish issue 127
The environmental variable DBIISH_MYSQL_LIB was removed. I don't know if anyone brought it back.
However if you add the library's path, and the file is named mysql.dll, it will work. Not a good result for the scientific method.
So more testing is needed - and perhaps
C:\Program Files\MySQL\MySQL Server 8.0\lib>mklink mysql.dll .\libmysql.dll
Oviously you can create your own lib directory and add that to your path and then add this symlink to that directory.
Hope this helps. I've spent hours..
EDIT: Still spending time - accounting later.
Something very transitory is going on. I reset the machine (perhaps always do this from now on), and still got the missing mysql.dll errors. Tried going into the MySQL lib directory to execute raku from there.. worked. changed directories.. didn't work.
Launched administrator cmd - from home directory, tried the raku command. Worked. Ok - not good, but perhaps consistent. Launched non admin cmd, tried it from the MySQL lib directory, worked. And just for giggles, tried it outside of that directory.. worked.
Now I can't get it not to work. Will explore NativeLibs::Searcher as Valle Lukas suggested!
Maybe the example in the dbiish repository is not valid anymore.
The DBIISH_MYSQL_LIB Env seems to be replaced by NativeLibs::Searcher with commit 9bc4191
Looking at NativeLibs::Searcher may help to find the root cause of the problem.
(I have Centos 7 with samba-client.x86_64 4.6.2-8.el7 against windows server 2008 that is in a AD Domain controlled by separate windows server 2008 AD domain controller)
Started with this:
smbclient -W my.domain -U myuser //svr.my.domain/fred mypassword -c list
... which worked great, then decided to move domain,user and password into a file and use -A as described in the smbclient manpage. File windows-credentials, content:
username=myuser
domain=my.domain
password=mypassword
... with command line:
smbclient -A windows-credentials //svr.my.domain/fred -c list
.... did not work, gave error:
SPNEGO(gse_krb5) NEG_TOKEN_INIT failed: NT_STATUS_NO_MEMORY
session setup failed: NT_STATUS_NO_MEMORY
... an hour on the internet suggested lots of people had this trouble and just about each had a different ticked answer, and none of them worked for me. Tried various combinations of their answers - in particular, https://askubuntu.com/questions/1008992/ubuntu-17-10-to-access-windows-files-shares-within-workplace-it, and ended up with...
Created a separate my.smb.conf with just:
[global]
# seems to get rid of
# SPNEGO(gse_krb5) NEG_TOKEN_INIT failed: NT_STATUS_NO_MEMORY
client use spnego = no
# seems to get rid of
# session setup failed: NT_STATUS_NO_MEMORY
client ntlmv2 auth = no
... and used:
smbclient -s my.smb.conf -A windows-credentials //svr.my.domain/fred -c list
... and it looks like it works, but I'm not really sure as there seems to be credentials caching and a complete lack of information on how this stuff works or is supposed to work.
Can anyone actually explain any of this? Even if not, perhaps yet another answer to this problem will help someone somewhere.
This appears to be specific to Windows 2008. Attaching to Windows Server 2016 works without the modified smb.conf file. I have been unable to locate any real details.
In case of problems with smbclient
you can mount smb folder and use it like local folder
mount -t cifs //<ip>/<share folder>$ /mnt -o user=<user>,pass=<password>,domain=<workdomain>
I managed to set up artifactory using our existing tomcat. I have set to ARTIFACTORY_HOME=/opt/artifactory, that part works well. There is, however, also the jfrog access.war file, which needs to be running as well. I didn't figure out which variable to use to specify its home, therefore it defaults to ~/.jfrog_access, which is not at all what I like.
I moved the content over to my $ARTIFACTORY_HOME/access and symlinked it, but that's not the way to go for sure. Any help appreciated.
In case someone is stumbling over this thread and struggles with the same problem:
Solution for me was to also extract the Context files (access.xml and artifactory.xml which are available in the zip file under <zip extract>/misc/tomcat) to the Tomcat configuration folder, e.g. $CATALINA_HOME/conf/Catalina/localhost/. After that the $ARTIFACTORY_HOME env will be recognized on Access startup.
A previous answer finally put me on the right track for solving this problem on Amazon Linux.
In addition to copying access.xml and artifactory.xml to ${catalina.home}/host/MY_HOSTNAME, I found that some other changes were needed.
I modified the docBase attributes in the XML context files because my server has multiple hostnames:
/usr/share/tomcat8/conf/Catalina/repo.mydomain.org/access.xml
<Context path="/access" docBase="${catalina.home}/host/repo.mydomain.org/access.war">
<Parameter name="jfrog.access.bundled" value="true" override="true"/>
<!-- enable annotations scanning of access jar files -->
<JarScanner scanClassPath="false">
<JarScanFilter defaultPluggabilityScan="false" pluggabilityScan="access*" defaultTldScan="false"/>
</JarScanner>
</Context>
/usr/share/tomcat8/conf/Catalina/repo.mydomain.org/artifactory.xml
<Context crossContext="true" path="/artifactory" docBase="${catalina.home}/host/repo.mydomain.org/artifactory.war">
</Context>
Important Note: In order to prevent the above two XML files from being deleted by Tomcat Manager during upgrades via Undeploy/Deploy WAR, make sure they are owned by root and not writable by the tomcat user:
chown root.root access.xml artifactory.xml
chmod 644 access.xml artifactory.xml
If you forget to do the above, you will likely end up missing these files, which will break the communication between the access and artifactory web applications, resulting in login failures ("Username or Password Are Incorrect"). In this case, these errors result from the lack of communication between the web applications, not a problem with the credentials themselves.
/usr/share/tomcat8/conf/Catalina/repo.mydomain.org/manager.xml
This gives me the ability to upload new versions of access.war and artifactory.war via https://repo.mydomain.org:8443/manager/html:
<Context docBase="${catalina.home}/webapps/manager" privileged="true" antiResourceLocking="false">
</Context>
Additionally, I created the following folder to serve as the artifactory.home:
sudo mkdir /usr/share/artifactory
sudo chown tomcat.tomcat /usr/share/artifactory
tomcat8.conf
Add (or modify) the following line:
JAVA_OPTS="-Dartifactory.home=/usr/share/artifactory -Djfrog.access.home=/usr/share/artifactory/access -Dartifactory.access.client.serverUrl.override=http://localhost:8080/access"
Note: The Access Client URL specified above must use localhost in order to avoid the Server HTTP parameter from being overwritten by Apache and its modules. For instance, if I use:
https://repo.mydomain.org/access/api/v1/system/ping
The Server HTTP header value in the response is:
Server: Apache/2.4.33 (Amazon) OpenSSL/1.0.2k-fips mod_jk/1.2.43
And the Access Client produces the following exception:
[ERROR] (o.j.a.c.AccessClientImpl:154) - Access client/server version mismatch. Client version: 4.1.5, Server version: 2.4.33 (Amazon) OpenSSL
Which means the Access Client is depending on the first string matching #.#.# in the server header. This seems like a really fragile part of the Access Client. They should have used X-JFrog-Access-Server or something instead of trying to control a value that is set by the web server. So, to reiterate, use http://localhost:8080/access to connect directly to the tomcat server.
Artifactory 6.2.0 depends on Apache Derby (the specific version can be found in jfrog-artifactory-oss-6.2.0.zip\artifactory-oss-6.2.0\tomcat\lib). This should be added as a shared library to Tomcat:
mkdir /usr/share/tomcat8/shared
cd /usr/share/tomcat8/shared
wget http://central.maven.org/maven2/org/apache/derby/derby/10.11.1.1/derby-10.11.1.1.jar
Add or modify the following line in catalina.properties:
shared.loader=${catalina.home}/shared/*.jar
Since we want https://repo.mydomain.org to go to the Artifactory webapp:
mkdir /usr/share/tomcat8/host/repo.mydomain.org/ROOT
echo '<html><head><meta http-equiv="refresh" content="0;URL=/artifactory"></meta></head><body></body></html>' > /usr/share/tomcat8/host/repo.mydomain.org/ROOT/index.html
And make sure the services automatically start on reboot:
sudo chkconfig httpd on
sudo chkconfig tomcat8 on
Artifactory will then be available at the url:
https://repo.mydomain.org/artifactory/webapp/