<div id="top">
*height: auto;
min-height: 100%;*
<div id="content">
*min-height: 500px;*
</div>
<div id="middle">
*css ???*
</div>
</div>
<div id="footer">
</div>
This code works nice when the screen size is normal. But in full screen mode, the footer goes to the bottom of the page (wanted behaviour) but the ''middle'' div must increase its height to get the footer. I mean, the 3 elements (content, middle and footer) must be continuous.
Which css rules should I use to do this behaviour?
Thanks in advance!
UPDATE.
I've used a couple css rules and works, but don't in IE8 (works in IE9, Chrome, FF3 e FF4). The relevant CSS is:
Top{ height: auto; }
Content{ min-height: 100%; }
Middle{ overflow: auto; padding-bottom: 130px; }
Footer{ clear: both; height: 130px; margin-top: -130px; position: relative; }
You might try CSS Media Queries with max or min-height. Examples here: http://ie.microsoft.com/testdrive/HTML5/CSS3MediaQueries/Default.html
and documentation here: http://www.w3.org/TR/css3-mediaqueries/
height:100%; should be all that is needed to make it take up the available space.
The Bad News: To be honest, mate, I don't think this is possible with this exact specification. It would take some very clever css at any rate. However, tables would work nicely. I'm completely against the idea, but if this design requirement is a must, then perhaps you should go the route.
The Good News: Depending on why it is you need them to be fluid, we could maybe give the desired effect. If it's just for backgrounds to match up, we could probably do that. Update your post with more information and I'll (hopefully) update mine with an answer.
Related
JS Fiddle: https://jsfiddle.net/7p81bnto/2/
HTML:
<body>
<main>
<div>
<div style="
height: 50px;
width: 200px;
background-color: green;
float: right;
"></div>
<div style="
height: 50px;
width: 100%;
background-color: yellow;
display: table;
padding-top: 50px;
"></div>
</div>
</main>
</body>
Viewing these in Firefox and Chrome gives different layouts.
Can anyone explain why that is the case. I suspect it is related to the display:table property, but I don't really understand why.
For annoying reasons, I can't remove the display:table, but I need to get the body of the lower div lined up below the floating div.
Can anyone suggest how to achieve this consistently across both browser?
You can add:
float: right
to both divs and achieve the same look in both browsers.
Fiddle: https://jsfiddle.net/75ux730g/2/
It turns out that {clear: both} also achieves a correct look, and I think is arguably a better solution (by which I mean, one that ends up with CSS that more accurately reflects my design desires.)
I have a problem with my HTML/CSS webpage. I want to have this layout:
http://img227.imageshack.us/img227/9978/layoutw.png
But all what I get is a layout in which the areas are only as high as the content is.
Here you can see my website: http://ud05_188.ud05.udmedia.de/spotlight/jquery.html I tried several work-arounds, but it does not work.
What's the best way to solve this?
you can use the following code
html
<div id="wrapper">
<div id="left"></div>
<div class="right">start of top</div>
<div class="right">start of bottom</div>
</div>
css
html, body {
height:100%;
}
#wrapper {
height:100%;
overflow:hidden;
}
#left {
height:100%;
width:50%;
background:#09F;
float:left;
}
.right {
height:50%;
width:50%;
float:left;
background:#69a;
}
live example: http://jsbin.com/idozi4
What you're looking for is an adaptation of the Holy Grail method. In this case, #list1 is the 'left' column (as described in that article) and the rest goes into the 'center' column, so that means you can leave out the 'right' column altogether.
Basically something like:
<div id="container">
<div id="left">
#list 1 contents
</div>
<div id="center">
<div>
#list2
</div>
<div>
#data
</div>
</div>
</div>
#container {
padding-left: 200px; /* LC width */
}
#container > div {
position: relative;
float: left;
}
#center {
width: 100%;
}
#left {
width: 200px; /* LC width */
right: 200px; /* LC width */
margin-left: -100%;
}
Heights will always be tricky... some solutions call for using explicit heights, but then if your content ever gets bigger, it'll overflow and look nasty, or worse, overflow and be inaccessible to the user.
You can use min-heights to display a best-case scenario, in which if the content needs to be taller, the minimum requirement will allow the div to stretch. You can use absolute positioning to get the layout that you want, but then the divs wont be flexible enough to accommodate content. You can use overflow: scroll to allow the divs to act like frames, but that is usually more annoying and messy-looking for the user.
I'd say use the above holy grail method to lay the containers out, and then use min-height for a best case scenario layout.
If none of those solutions are good enough, then there are also plenty of blog posts out there from experts about how to get equal height columns more consistently.
By default, giving something height: 100% will make the item as big as the item that contains it. This works for, say, divs within divs, but not for divs directly within the body tag. For this to work you need to set the height of the body element. Like so.
html, body{
height: 100%;
}
Hope this helps.
Update:
I think you are having trouble because you are trying to do two things which are tricky with CSS: fixed-to-bottom-of-page footers and 100% height. I think you will have to change the way that your footer works in order to get the 100% height working.
I haven't got a complete solution but I have made an example page:
http://deviouschimp.co.uk/misc/stackoverflow/columntest.html
That should sort out your 100% height issues. The footer doesn't always match the bottom of the content (#wrap height:94% gets it close, but it's not perfect).
This sticky footer technique should sort the rest out: http://www.cssstickyfooter.com/
Good luck!
I am coding exclusive ie6 css, wherein I am facing the problem. The footer does not take the min-width value whereas it accepts the fixed width value. I am using the repeat-x for an image and assigning a min-width value to it. The same thing I did with header div and it works perfectly fine. For example here is my code.
Header HTML which I have used for the same purpose.
<div id="header">
<!-- top-menu -->
<div id="top-menu">
<div id="left-logo">
<img src="img/logo-left.png" alt="BhatkalNews" />
</div>
<div id="navigation">
<ul>
<li class="contact"><img src="img/contact.png" alt="contact" /></li>
<li class="photo"><img src="img/photo.png" alt="photo"/></li>
<li class="video"><img src="img/video.png" alt="video" /></li>
</ul>
</div>
<div id="right-logo">
<img src="img/logo-right.png" alt="BhatkalNews" />
</div>
</div>
</div>
And here is the css I have used.
#header {
min-width: 1040px;
height: 111px;
background: url('../img/header-bg.jpg') repeat-x;
}
and for the same purpose the footer code is.
<div id="footer">
</div>
and the css
#footer {
min-width:1040px;
background:#36240A url('../img/footer.jpg') repeat-x;
height:291px;
}
Why isn't footer assigning the min-width?
Min-width doesn't work with IE6 - no surprises there as IE6 is terrible.
There are some workarounds, here is one:
{width:90%; min-width:1040px}
Basically, use width with a percentage - you'll have to experiment on the percentage depending on what you are trying to achieve.
IE6(not even 7) does not support min-width.
try expresssions like
width: expression( document.body.clientWidth < 1040 ? "1040px" : "auto" );
Unfortunately min-width simply doesn't work in IE6. There's some javascript based hacks that you can try though if you absolutely need to use min-width.
min-width and max-width are not supported by ie6.
Here is a workaround that I found with a quick google.
Though I haven't tested it, it seems to be sound.
This only works in IE:
#footer{
width:expression
(document.body.clientWidth < 1040? "1040px": "auto")
}
Try _width: 1040px; along with min-width: 1040px;
well to be frank none of the solution worked satisfactorily for me. and after doing a workaround i came up with this solution.
<div id="footer">
<div id="footer-content">
</div>
</div>
i defined the footer. and wrapped footer-content inside it and assigned width of 990px as i wanted the content to be wrapped within 940px i gave a padding of 50px; to the left. here is the css i used.
/*footer*/
#footer {
height: 291px;
background: url('../img/footer.jpg') repeat-x;
}
#footer-content {
margin:0 auto!important;
width: 990px;
height:291px;
padding-left:50px;
}
this works perfectly fine for me and the div's positions perfectly fine even if i am resizing. thank you for all the help guys. :)
Since you're coding exclusively for IE6, it be much more simple just to use:
width: 1040px;
IE6 doesn't recognize min-width, but treats width incorrectly, as if it was min-width.
(If it's not exclusively for IE6, you can use a hack, like the _width they already suggested you... or, even better, use conditional comments).
I've explained how to use min-width or min-height in IE6 over here: Min width in window resizing
In the body of my site, I am trying to create two columns - one on the far right with a fixed width (300px) for advertisements etc, and one on the left which will take up the remaining space on the page. How can this be accomplished in CSS?
CSS :
.column-right {
float: left;
width: 100%;
height: 200px;
background-color: red;
}
.column-right .column-content {
margin-left: 250px;
}
.column-left {
float: left;
margin-left: -100%;
width: 250px;
height: 200px;
background-color: green;
}
HTML :
<div class="column-right">
<div class="column-content">
<strong>Right Column:</strong><em>Liquid</em>
</div>
</div>
<div class="column-left">
<strong>Left Column:</strong><em>250px</em>
</div>
Here is a tool to generate fixed liquid columns for placing adsense ads.
CSS:
#right-column{
width:300px;
float:right;
}
#other-column{
float:left;
width:100%;
padding-right:20px; /*to prevent text overlap as suggested in the comment*/
}
In HTML:
<div id='right-column'>
<!-- ads here -->
</div>
<div id='other-column'>
<!-- content here -->
</div>
You might also want to check out the YUI: CSS Grid Builder. It is a simple web interface where you specify what grid layout you are looking for, and they will provide you the html code you can use in combination with the YUI Grids CSS framework to get your desired layout. One nice thing about the YUI Grids CSS framework is it has good cross browser support which saves you time getting it to work across different browsers. You can also reverse engineer the code that you are provided from the grid builder to get some ideas on how you can do it on your own. The settings you will want to use with the YUI: CSS Grid Builder to get your desired layout is as follows:
Body Size: 100%
Body Columns: Sidebar right 300px
One solution I've found for this is to float the right column to the right and give the left column an absolute position with left:0 and right:300px. This will make it fluid as if you gave it a width:80%, but it will be relative to the parent container in a different way.
Here's an example:
http://jsfiddle.net/tkane2000/dp9GZ/
One issue you might find with this is that since it's absolute, it won't naturally push down the elements below it.
Another possible solution would be to give the left column
width:100%
padding-right: 300px;
and the right (fixed width) column:
position: absolute:
top:0;
right:0;
You might need to set box-sizing:border-box on the left column.
This also as some limitations. One that comes to mind, is that if you wanted the left column to have a border-right to separate each, the border would be on the wrong side of the right column.
I am trying to lay out a table-like page with two columns. I want the rightmost column to dock to the right of the page, and this column should have a distinct background color. The content in the right side is almost always going to be smaller than that on the left. I would like the div on the right to always be tall enough to reach the separator for the row below it. How can I make my background color fill that space?
.rightfloat {
color: red;
background-color: #BBBBBB;
float: right;
width: 200px;
}
.left {
font-size: 20pt;
}
.separator {
clear: both;
width: 100%;
border-top: 1px solid black;
}
<div class="separator">
<div class="rightfloat">
Some really short content.
</div>
<div class="left">
Some really really really really really really
really really really really big content
</div>
</div>
<div class="separator">
<div class="rightfloat">
Some more short content.
</div>
<div class="left">
Some really really really really really really
really really really really big content
</div>
</div>
Edit: I agree that this example is very table-like and an actual table would be a fine choice. But my "real" page will eventually be less table-like, and I'd just like to first master this task!
Also, for some reason, when I create/edit my posts in IE7, the code shows up correctly in the preview view, but when I actually post the message, the formatting gets removed. Editing my post in Firefox 2 seems to have worked, FWIW.
Another edit: Yeah, I unaccepted GateKiller's answer. It does indeed work nicely on my simple page, but not in my actual heavier page. I'll investigate some of the links y'all have pointed me to.
Ahem...
The short answer to your question is that you must set the height of 100% to the body and html tag, then set the height to 100% on each div element you want to make 100% the height of the page.
Actually, 100% height will not work in most design situations - this may be short but it is not a good answer. Google "any column longest" layouts. The best way is to put the left and right cols inside a wrapper div, float the left and right cols and then float the wrapper - this makes it stretch to the height of the inner containers - then set background image on the outer wrapper. But watch for any horizontal margins on the floated elements in case you get the IE "double margin float bug".
Give this a try:
html, body,
#left, #right {
height: 100%
}
#left {
float: left;
width: 25%;
}
#right {
width: 75%;
}
<html>
<body>
<div id="left">
Content
</div>
<div id="right">
Content
</div>
</body>
</html>
Some browsers support CSS tables, so you could create this kind of layout using the various CSS display: table-* values. There's more information on CSS tables in this article (and the book of the same name) by Rachel Andrew: Everything You Know About CSS is Wrong
If you need a consistent layout in older browsers that don't support CSS tables, you need to do two things:
Make your "table row" element clear its internal floated elements.
The simplest way of doing this is to set overflow: hidden which takes care of most browsers, and zoom: 1 to trigger the hasLayout property in older versions of IE.
There are many other ways of clearing floats, if this approach causes undesirable side effects you should check the question which method of 'clearfix' is best and the article on having layout for other methods.
Balance the height of the two "table cell" elements.
There are two ways you could approach this. Either you can create the appearance of equal heights by setting a background image on the "table row" element (the faux columns technique) or you can make the heights of the columns match by giving each a large padding and equally large negative margin.
Faux columns is the simpler approach and works very well when the width of one or both columns is fixed. The other technique copes better with variable width columns (based on percentage or em units) but can cause problems in some browsers if you link directly to content within your columns (e.g. if a column contained <div id="foo"></div> and you linked to #foo)
Here's an example using the padding/margin technique to balance the height of the columns.
html, body {
height: 100%;
}
.row {
zoom: 1; /* Clear internal floats in IE */
overflow: hidden; /* Clear internal floats */
}
.right-column,
.left-column {
padding-bottom: 1000em; /* Balance the heights of the columns */
margin-bottom: -1000em; /* */
}
.right-column {
width: 20%;
float: right;
}
.left-column {
width: 79%;
float: left;
}
<div class="row">
<div class="right-column">Right column content</div>
<div class="left-column">Left column content</div>
</div>
<div class="row">
<div class="right-column">Right column content</div>
<div class="left-column">Left column content</div>
</div>
This Barcamp demo by Natalie Downe may also be useful when figuring out how to add additional columns and nice spacing and padding: Equal Height Columns and other tricks (it's also where I first learnt about the margin/padding trick to balance column heights)
I gave up on strictly CSS and used a little jquery:
var leftcol = $("#leftcolumn");
var rightcol = $("#rightcolumn");
var leftcol_height = leftcol.height();
var rightcol_height = rightcol.height();
if (leftcol_height > rightcol_height)
rightcol.height(leftcol_height);
else
leftcol.height(rightcol_height);
Here's an example of equal-height columns - Equal Height Columns - revisited
You can also check out the idea of "Faux Columns" as well - Faux Columns
Don't go the table route. If it's not tabular data, don't treat it as such. It's bad for accessibility and flexibility.
I had the same problem on my site (shameless plug).
I had the nav section "float: right" and the main body of the page has a background image about 250px across aligned to the right and "repeat-y". I then added something with "clear: both" to it. Here is the W3Schools and the CSS clear property.
I placed the clear at the bottom of the "page" classed div. My page source looks something like this.
body
-> header (big blue banner)
-> headerNav (green bar at the top)
-> breadcrumbs (invisible at the moment)
-> page
-> navigation (floats to the right)
-> content (main content)
-> clear (the quote at the bottom)
-> footerNav (the green bar at the bottom)
-> clear (empty but still does something)
-> footer (blue thing at the bottom)
I hope that helps :)
No need to write own css, there is an library called "Bootstrap css" by calling that in your HTML head section, we can achieve many stylings,Here is an example:
If you want to provide two column in a row, you can simply do the following:
<link rel="stylesheet" href="https://maxcdn.bootstrapcdn.com/bootstrap/3.3.7/css/bootstrap.min.css">
<div class="row">
<div class="col-md-6">Content</div>
<div class="col-md-6">Content</div>
</div>
Here md stands for medium device,,you can use col-sm-6 for smaller devices and col-xs-6 for extra small devices
The short answer to your question is that you must set the height of 100% to the body and html tag, then set the height to 100% on each div element you want to make 100% the height of the page.
A 2 column layout is a little bit tough to get working in CSS (at least until CSS3 is practical.)
Floating left and right will work to a point, but it won't allow you to extend the background. To make backgrounds stay solid, you'll have to implement a technique known as "faux columns," which basically means your columns themselves won't have a background image. Your 2 columns will be contained inside of a parent tag. This parent tag is given a background image that contains the 2 column colors you want. Make this background only as big as you need it to (if it is a solid color, only make it 1 pixel high) and have it repeat-y. AListApart has a great walkthrough on what is needed to make it work.
http://www.alistapart.com/articles/fauxcolumns/
I can think of 2 options
Use javascript to resize the smaller column on page load.
Fake the equal heights by setting the background-color for the column on the container <div/> instead (<div class="separator"/>) with repeat-y
Just trying to help out here so the code is more readable.
Remember that you can insert code snippets by clicking on the button at the top with "101010". Just enter your code then highlight it and click the button.
Here is an example:
<html>
<body>
<style type="text/css">
.rightfloat {
color: red;
background-color: #BBBBBB;
float: right;
width: 200px;
}
.left {
font-size: 20pt;
}
.separator {
clear: both;
width: 100%;
border-top: 1px solid black;
}
</style>
This should work for you: Set the height to 100% in your css for the html and body elements. You can then adjust the height to your needs in the div.
html {
height: 100%;
}
body {
height: 100%;
}
div {
height: 100%; /* Set Div Height */
}
It's enough to just use the css property width to do so.
Here is an example:
<style type="text/css">;
td {
width:25%;
height:100%;
float:left;
}
</style>
.rightfloat {
color: red;
background-color: #BBBBBB;
float: right;
width: 200px;
}
.left {
font-size: 20pt;
}
.separator {
clear: both;
width: 100%;
border-top: 1px solid black;
}
<div class="separator">
<div class="rightfloat">
Some really short content.
</div>
<div class="left">
Some really really really really really really
really really really really big content
</div>
</div>
<div class="separator">
<div class="rightfloat">
Some more short content.
</div>
<div class="left">
Some really really really really really really
really really really really big content
</div>
</div>