I installed Postfix, Courier and a bunch of other e-mail related services on my Ubuntu server. The data is fetched from a MySQL database. But when I try to connect through Thunderbird, I get this error:
ssl_error_rx_record_too_long
Why :(? How can this be fixed??
How many bits in your SSL key? IIRC, you'll get this error if you use larger than a 2048 bit key.
This error also happens in Thunderbird, however against a Courier imapd ssl installed on Gentoo.
Turns out there were a bunch of broken SSL certificate symlinks in /etc/ssl/certs. Removing them fixed the problem.
find . -type l | (while read FN ; do test -e "$FN" || ls -ld "$FN"; done)
Related
I have two laptops that I use when I travel. I need them to have access
to my LDAP server. I tried configuring this in my IPFW firewall rules,
but they fail:
#!/bin/sh
cmd="ipfw -q add"
pif="em0"
## Lots of rules - truncated
$cmd allow log tcp from any MAC "0C:54:A5:04:BA:DD" to me 389 in via $pif setup keep-state
$cmd allow log tcp from any MAC "00:1A:A0:89:CA:EA" to me 389 in via $pif setup keep-state
This is the error message repeated twice:
ipfw: missing ``to''
If I substitute an IP address and remove the "any MAC "address" it works
fine. I got this example from a web search. Can anyone tell me what I
am doing wrong?
Looking at the manual page, the MAC dst-mac src-mac is a rule option which means it should appear after the proto from src to dst part of the rule.
So your rule option is both incomplete and in the wrong place.
Are you attempting to check the MAC address while your laptops are travelling? Because I would have thought that the MAC screening will only be meaningful when the laptops are on the same LAN as the firewall.
While running tcpdump without providing any interface
tcpdump -nS,
I'm getting tcpdump: cannot use data link type PKTAP error so I tried providing the Interface option in the command
tcpdump -i eth0 or even eth1
then I get the following error
tcpdump: eth1: No such device exists
(BIOCSETIF failed: Device not configured)
I even tried looking up on the Internet but i'm not getting any solution ...
Any help ??
I can't speak to your problem with PKTAP, but I can speak to the "No such device exists" - eth0 is a Linux-ism, and MacOS isn't Linux. You almost certainly want en0, en1, etc. "ifconfig -a" is your friend or, if you have it installed, "tshark -D".
Any reason on why PKTAP issue is occurring
It's probably occurring because you installed your own version of libpcap, which does not know about the DLT_PKTAP link-layer header type, and Apple's tcpdump is somehow using your version rather than their own version (Apple's version does know about it) and, therefore, failing because, when its version of tcpdump is run without a -i argument, it uses an OS mechanism to capture on all devices, and that mechanism supplies packets with DLT_PKTAP headers and the DLT_PKTAP link-layer header type.
I have a Cpanel Server.
It send emails correctly expect from 1 domain which hosted on the server , so when I try to send email from that domain using roundcube or Horde I got the errror
SMTP Error (451): Failed to add recipient "recipient#exmple.com" (Temporary local problem - please try later).
does anyone know why and how to fix this?
I found the porblem:
After reviewing the file /var/log/exim_mainlog using
tail -f /var/log/exim_mainlog
I noticed that the error was:
2013-05-29 20:04:28 SMTP connection from [127.0.0.1]:36797 (TCP/IP connection count = 1)
2013-05-29 20:04:28 lowest numbered MX record points to local host: domain.com (while verifying <user#domain.com> from host localhost.localdomain (domain.com) [127.0.0.1]:36797)
2013-05-29 20:04:28 H=localhost.localdomain (domain.com) [127.0.0.1]:36797 sender verify defer for <user#domain.com>: lowest numbered MX record points to local host
2013-05-29 20:04:28 H=localhost.localdomain (domain.com) [127.0.0.1]:36797 F=<user#domain.com> A=dovecot_login:narena temporarily rejected RCPT <recipient#exmple.com>: Could not complete sender verify
2013-05-29 20:04:28 SMTP connection from localhost.localdomain (domain.com) [127.0.0.1]:36797 closed by QUIT
so the main problem was:
lowest numbered MX record points to local host
after couple of search I found the soluation in http://forums.cpanel.net/f5/lowest-numbered-mx-record-points-local-host-73563.html
which was to:
login to WHM and go to Main >> DNS Functions >> Edit MX Entry for the domain
set MX priority to 0 for the related domain and save.
I had the same problem after running a script to fix directory permissions on a cPanel-powered server (CentOS 6.5). I checked the logfile (tail -f /var/log/exim_mainlog) and found this error:
require_files: error for /home/user_name/etc/domain.com: Permission denied
Just ran the following command and the issue was fixed:
chown -R user_name:mail /home/user_name/etc/
Hope this helps someone.
check the the file /var/log/exim_mainlog to see more information about the error
tail -f /var/log/exim_mainlog
while trying to send email
Check your MX Entry in Cpanel, if the existing domain priority is less than or equals to 0, set it to 1. Mine is fixed. Hope it will help you.
Wow, after about an hour of searching and meddling with different files, I'd caution any novice not to venture out editing anything before you have a backup or image if your server, as you can cause irrevocable damage to your server. So many people talking garbage about what you should do or test without any real solution.
Anyways, here's what worked for me:
Real problem: Exim was updated to latest version which has loads of bugs like this issue.
How I fixed my server:
Authenticate to Linux via SSH and run the command lines through which we download and install the old version of EXIM.
Command Line 1: wget https://ca1.dynanode.net/exim-4.93-3.el7.x86_64.rpm
Command Line 2: rpm -Uvh --oldpackage exim-4.93-3.el7.x86_64.rpm
Command Line 3: systemctl restart exim
Command Line 4: Systemctl restart clamd
Command Line 5: systemctl restart spamassassin
Optional: just type "Reboot" to restart your server
The command lines above does the following:
Downloads the old package (I'm sure you can google other sources with this file)
Install the old package without prompt
Restart the Exim service
Restart the Clamd Service (AV)
Restart the spamassassin service (Spam Filter)
Restart outlook or whatever you use for mail client and send an email. Mine works, hope yours do too.
I have installed CDH4 on CentOS 6.3 64-bit in Pseudo Distributed mode using the following instructions. Everything is set to localhost in the Hadoop configuration files. But, still when I format the name node the below exception appears. When I add an 192.168.1.101 CentOSHost entry to the /etc/hosts file the exception goes away and I am able to run format/start HDFS and run MR jobs.
I want to run MR jobs even when I am not connected to the network without adding an entry to the /etc/hosts file. How to get this done?
12/08/27 22:17:15 WARN net.DNS: Unable to determine address of the host-falling back to "localhost" address
java.net.UnknownHostException: CentOSHost: CentOSHost
at java.net.InetAddress.getLocalHost(InetAddress.java:1360)
at org.apache.hadoop.net.DNS.resolveLocalHostIPAddress(DNS.java:283)
at org.apache.hadoop.net.DNS.(DNS.java:59)
at org.apache.hadoop.hdfs.server.namenode.NNStorage.newBlockPoolID(NNStorage.java:1017)
at org.apache.hadoop.hdfs.server.namenode.NNStorage.newNamespaceInfo(NNStorage.java:565)
at org.apache.hadoop.hdfs.server.namenode.FSImage.format(FSImage.java:145)
at org.apache.hadoop.hdfs.server.namenode.NameNode.format(NameNode.java:724)
at org.apache.hadoop.hdfs.server.namenode.NameNode.createNameNode(NameNode.java:1095)
at org.apache.hadoop.hdfs.server.namenode.NameNode.main(NameNode.java:1193)
It looks like some where the configuration is returning/ using the hostname as CentOSHost.
What does hostname --fqdn returns to you?
For Hadoop, it is important that name look-up and reverse look-up work successfully. You should be able to resolve the ip-address and resolve hostname from the ip-address (Reverse resolution). This can be tested using the above command.
The entry to /etc/hosts is required for the reverse resolution to work. Unless the entry and the configuration are pointing to localhost. Even in that case the hostname --fqdn should return as localhost.
I have configure ejabberd server 2.1.10 with mysql database integration,mod_admin_extra module and mod_xmlrpc module.
Issues is ejaberd admin commands like add_rosteritem, delete_rosteritem are notworking with xml_rpc.
When we use direct command line like,
*root#ejabberdserver:~# ejabberdctl add_rosteritem admin domain.com karthik domain.com karthik none both*
it will work and store in to database.
but same command does not work with xml_rpc.
xml_rpc does not return any error, it retun {ok,{response,[0]}}
But it does't store database.
Any permission issue?
Any body please help!!!!!
I meet the similar issue recently, and turn out the root cause was there a bug in (svn)ejabberd_module source code, and this was reported in https://github.com/processone/ejabberd-contrib/issues/22 and fixed in ejabberd-contrib,
So I suggest you download the source https://github.com/processone/ejabberd-contrib and rebuild the mod_admin_extra.