I'm using Code::Blocks 10.05 (currently on Windows).
When I run the program (Ctrl + F10), all the warnings in the build log disappear, so the first line is "Checking for existence...".
So when I build & run (F9), it's not possible to read the warnings, because they're only visible for a few seconds.
Where is the setting to change that?
Just simply use the Build command for your project without running it. Shortcut for this is Ctrl + F9. That way you get to keep your build log.
Related
I'm sometimes stuck while attempting to debug my code.
Debug Session is active, code execution is suspended :
But I cannot see what really happens, as the breakpoint show "unavailable" ("no parking" symbol):
Does anybody know about this sign ?
I still haven't found any information about it on JetBrains sites... that's why I'm here :-)
(PhpStorm 2020.3, using docker containers (linux containers) with Docker Desktop/ Windows 10)
[EDIT] :
I just noticed that "break at first line in php script" seem to be functioning though:
But I have these weird breakpoints instead of red "normal" ones, and an highlighted line.
I tried restarting my docker containers, same issue. This produces seemingly randomly and gets solved after a while ... (reboot ?...)
[EDIT] SOLVED
The path mapping (local<->docker) for the root of my project was empty (how did it happen...) in my docker configuration in PhPStorm.
I'm not sure how this problem occured, but I'll be able to solve it next time if it's back.
If you try to disable "break at first line in php scripts" you may get the message :
17:38 Debug session was finished without being paused It may be
caused by path mappings misconfiguration or not synchronized local and
remote projects. To figure out the problem check path mappings
configuration for 'docker-server' server at PHP|Servers or enable
Break at first line in PHP scripts option (from Run menu). Do not
show again
In my case, the path mapping for the root of my project was incomplete "Absolute path on the server" was emtpy. I don't know how it happened but you could check :
In PHP | Servers
I'm using Sublime Text 3 and installed browsersync package for live reloading.
When I quit from Sublime and close liveserver app in my browser and try to open new liveserver with react start command I get a message that say: "Something is already running on port 3000." Then I check localhost:3000 and the browser still sync to Sublime I don't know how to turn off liveserver in port 3000 ?
please help me
I assume that this is the plugin you're using. Unfortunately, the plugin has been abandoned for 5 years, and the way it's written, there is no method for killing the node server once you're done with the plugin. From the Windows command line, this:
taskkill /im node-windows.exe /f /t
should do the trick, but you'll have to run it manually. Alternatively, you can use Task Manager to kill any node-windows.exe processes.
Another way to kill the service is going to
Start -> Resource Monitor -> Network
Under "Listening Ports" check for your port number, in this case 3000.
Take the process Id and then look for it under "Processes with Network Activity"
Check the process and right click -> End Process.
This will end the process utilizing the port 3000.
Try using Ctrl+C on your keyboard in your terminal or your command line (depending on whether your operating system is Unix based or Windows based). PowerShell should work too, if on a PC.
I am building an installer for our product which works well. I've managed to build custom actions to install our services including a MySQL server.
The problem I have is executing a sql file to build the schema structures.
I have a custom action which uses mysql.exe and the command line arguments:
--port=### --user=### --password=### < "[INSTALLDIR]db\EmptyStruct.sql"
It tries to execute this ok but the cmd window which pops up, during the install, just runs through the mysql.exe command line options, which says to me that the command line it gets passed is not correct. However if I run the command manually after the install, it works perfectly.
Does anyone has any ideas please.
I'm making a few assumptions here:
You have a Windows Installer exe custom action that specifies mysql.exe and a command line as you showed
You are expecting the contents of [INSTALLDIR]db\EmptyStruct.sql to be redirected to mysql.exe's standard input
This will not happen. Behind the scenes, Windows Installer's exe custom action support uses the CreateProcess API and this API will interpret command lines literally. However the redirect < needs special handling to actually perform redirection.
To get that behavior, you must use a layer of indirection. For example, you could run cmd.exe as the exe, and give it a command line that will make it interpret and run the command line mysql.exe --port= ... < "[INSTALLDIR]...". However, if you didn't already have a command prompt showing, this would cause one to show up. If you want to avoid that, you could write a custom wrapper that performs the redirection for you, either as a C++ DLL or, say, InstallScript action.
Alternately, if there is a parameter that tells mysql.exe to run a script from a file, you could pass that instead of using redirection. I wasn't able to find evidence of such a parameter in a quick web search.
Thanks for your comments Michael and I used cmd.exe /k AddStruct.bat to accomplish the task!
I execute this in order to open Google chrome in kiosk mode:
"C:\Users\Javier\AppData\Local\Google\Chrome\Application\chrome.exe" --user-data-dir=$(mktemp -d) --kiosk "url"
but, what I need to modify if google chrome is installed in Program Files(x86)? If I execute:
"C:\Program Files (x86)\Google\Chrome\Application\chrome.exe --user-data-dir=$(mktemp -d) --kiosk "url"
I get an error in --user-data-dir=$(mktemp -d) sentence.
Thanks in advance.
Javier
I think there may be no elegant solution at this point. "mktemp -d" is a linux/unix command and I can't find it, or an equivalent, on windows. It may have worked at one time (I stumbled on mktemp on a microsoft development page), but on 8.1 it didn't. The error I was getting said it had to do with permissions, but that wasn't the case.
If someone could get commands in Cygwin working at the windows command prompt then maybe the above would work. Another option may be to create something for PowerShell that does the same and plug that in there.
"C:\Program Files (x86)\Google\Chrome\Application\chrome.exe" --user-data-dir=c:\somedir --kiosk "some.url.here" does work though. It works from a shortcut, so it should also work from the command line, but you do lose the random temp directory.
For my case, I just wanted some websites/web-apps to default full screen (F11) from a shortcut and I'd just Alt-F4 to close, and Alt-Tab between them and the desktop. As it is, I'm thinking I'll have to make a separate data-dir for each one I want to do.
I was using the command chrome.exe --user-data-dir=$(mktemp -d) --kiosk http://someUrl/ and it was working well for over a week until I started testing my program with a limited privilege user today. I noticed that chrome process itself did not start after calling process.start() method. There were no entries in event logs to see what went wrong. After looking at your solution, I changed my program to generate a temp folder using C# command pass it as an argument and it started working. Thanks for the help. This is the simplified version of the code I use.
DirectoryInfo tempDirectory = Directory.CreateDirectory(Path.Combine(Path.GetTempPath(), "Chrome" + DateTime.Now.ToString("ddMMHHmmss")));
Process process = new Process();
process.StartInfo.FileName = GetBrowserPathFromRegistry();
process.StartInfo.Arguments = String.Format("--user-data-dir={0} --kiosk {1}", tempDirectory.FullName, this.uri);
process.Start();
I am using firefox extension to run hg commands on my repository. But when ever I execute any hg commands it shows command prompt window for a split second and closes it.
Eg:-
process.run("push");
process.run("update");
Is there any way to not show that window at all ?
Back in the day I used to have a tool that was hidewin.exe that would all you to start any bat file or exe file and have it run invisibly. I tried a google search for it but didn't find it easily but maybe you could have better luck at finding it.