I'm running mysql v8.0.23 in my local machine.
$ sudo apt-get install mysql-server
$ sudo snap install mysql-shell
But when I try to enter mysqlsh enter into js mode, It is giving the following error:
$ mysqlsh --js
Cannot set LC_ALL to locale en_US.UTF-8: No such file or directory
JavaScript is not supported.
Though I can switch to \sql or \py. What am I missing?
SHELL COMMANDS
The shell commands allow executing specific operations including updating the
shell configuration.
The following shell commands are available:
- \ Start multi-line input when in SQL mode.
- \connect (\c) Connects the shell to a MySQL server and assigns the
global session.
- \disconnect Disconnects the global session.
- \edit (\e) Launch a system editor to edit a command to be executed.
- \exit Exits the MySQL Shell, same as \quit.
- \G Send command to mysql server, display result vertically.
- \g Send command to mysql server.
- \help (\?,\h) Prints help information about a specific topic.
- \history View and edit command line history.
- \nopager Disables the current pager.
- \nowarnings (\w) Don't show warnings after every statement.
- \option Allows working with the available shell options.
- \pager (\P) Sets the current pager.
- \py Switches to Python processing mode.
- \quit (\q) Exits the MySQL Shell.
- \reconnect Reconnects the global session.
- \rehash Refresh the autocompletion cache.
- \show Executes the given report with provided options and
arguments.
- \source (\.) Loads and executes a script from a file.
- \sql Executes SQL statement or switches to SQL processing
mode when no statement is given.
- \status (\s) Print information about the current global session.
- \system (\!) Execute a system shell command.
- \use (\u) Sets the active schema.
- \warnings (\W) Show warnings after every statement.
- \watch Executes the given report with provided options and
tried to follow the offical documentation again..
needed to add apt-package for mysql
everything working fine now.
https://dev.mysql.com/doc/mysql-shell/8.0/en/mysql-shell-install-linux-quick.html
https://dev.mysql.com/doc/mysql-apt-repo-quick-guide/en/#apt-repo-setup
I am trying to identify the timestamp for the mysql command executed.
In the /root/.mysql_history file there is only command and no time is found.
Can a timestamp be stored in the mysql history file /root/.mysql_history in Linux using any configuration ?
If you invoke mysql --syslog, the client will write a log of the queries you execute in your system log, including the date & time.
On Linux this log is in /var/log/messages. On Mac, it's /var/log/system.log. On Windows, it's the Windows Event Log.
See https://dev.mysql.com/doc/refman/5.7/en/mysql-logging.html
You can also enable this option by default by editing /etc/my.cnf or your personal $HOME/.my.cnf:
[mysql]
syslog
I tried this in my VM, and I got the following in /var/log/messages. I tried twice, once using the command-line option and then with the config-file option.
Sep 19 16:09:30 sandbox-centos mysql: SYSTEM_USER:'vagrant', MYSQL_USER:'root', CONNECTION_ID:215, DB_SERVER:'127.0.0.1', DB:'--', QUERY:'select 'now is the time';'
Sep 19 16:10:02 sandbox-centos mysql: SYSTEM_USER:'vagrant', MYSQL_USER:'root', CONNECTION_ID:223, DB_SERVER:'127.0.0.1', DB:'--', QUERY:'select now();'
Of course any user can override this option, so it's pretty easy to cover one's tracks. In other words, you shouldn't rely on this as an auditing tool.
default: on
# description: mysqlchk
service mysqlchk
{
# this is a config for xinetd, place it in /etc/xinetd.d/
disable = no
flags = REUSE
socket_type = stream
type = UNLISTED
port = 9200
wait = no
user = root
server = /usr/bin/mysqlclustercheck
log_on_failure += USERID
only_from = 0.0.0.0/0
#
# Passing arguments to clustercheck
# <user> <pass> <available_when_donor=0|1> <log_file> <available_when_readonly=0|1> <defaults_extra_file>"
# Recommended: server_args = user pass 1 /var/log/log-file 0 /etc/my.cnf.local"
# Compatibility: server_args = user pass 1 /var/log/log-file 1 /etc/my.cnf.local"
# 55-to-56 upgrade: server_args = user pass 1 /var/log/log-file 0 /etc/my.cnf.extra"
#
# recommended to put the IPs that need
# to connect exclusively (security purposes)
per_source = UNLIMITED
}
/etc/xinetd.d #
It is kind of strange that script works fine when run manually when it runs using /etc/xinetd.d/ , it is not working as expected.
In mysqlclustercheck script, instead of using --user= and passord= syntax, I am using --login-path= syntax
script runs fine when I run using command line but status for xinetd was showing signal 13. After debugging, I have found that even simple command like this is not working
mysql_config_editor print --all >>/tmp/test.txt
We don't see any output generated when it is run using xinetd ( mysqlclustercheck)
Have you tried the following instead of /usr/bin/mysqlclustercheck?
server = /usr/bin/clustercheck
I am wondering if you could test your binary location with the linux which command.
A long time ago since this question was asked, but it just came to my attention.
First of all as mentioned, Percona Cluster Control script is called clustercheck, so make sure you are using the correct name and correct path.
Secondly, since the server script runs fine from command line, it seems to me that the path of mysql client command is not known by the xinetd when it runs the Cluster Control script.
Since the mysqlclustercheck script as it is offered from Percona, it uses only the binary name mysql without specifying the absolute path I suggest you do the following:
Find where mysql client command is located on your system:
ccloud#gal1:~> sudo -i
gal1:~ # which mysql
/usr/local/mysql/bin/mysql
gal1:~ #
then edit script /usr/bin/mysqlclustercheck and in the following line:
MYSQL_CMDLINE="mysql --defaults-extra-file=$DEFAULTS_EXTRA_FILE -nNE --connect-timeout=$TIMEOUT \
place the exact path of mysql client command you found in the previous step.
I also see that you are not using MySQL connection credentials for connecting to MySQL server. mysqlclustercheck script as it is offered from Percona, it uses User/Password in order to connect to MySQL server.
So normally, you should execute the script in the command line like:
gal1:~ # /usr/sbin/clustercheck haproxy haproxyMySQLpass
HTTP/1.1 200 OK
Content-Type: text/plain
Where haproxy/haproxyMySQLpass is the MySQL connection user/pass for HAProxy monitoring user.
Additionally, you should specify them to your script's xinetd settings like:
server = /usr/bin/mysqlclustercheck
server_args = haproxy haproxyMySQLpass
Last but not least, the signal 13 you are getting is because you try to write something in a script run by xinetd. If for example in your mysqlclustercheck you try to add a statement like
echo "debug message"
you probably going to see the broken pipe signal (13 in POSIX).
Finally, I had issues with this script using SLES 12.3 and I finally manage to run it not as 'nobody' but as 'root'.
Hope it helps
I have a problem with active checking. I need to check if my debian servers are updated. Pasive check is allready working but I try active checks for first time. I inserted into zabbix_agentd.conf user parameter
UserParameter=system.sw.debianupdates,apt-get dist-upgrade -s |sed -n 's/^\([0-9]\+\) upgraded.*/\1/p'
and set ServerActive(same like server for passive), RefreshActiveChecks(120)
I created an item http://prntscr.com/6jyvww
If I check values in latest data in graph there are no value(no data) but if I try
zabbix_get -s IP -k system.sw.debianupdates
on zabbix server I get a value which I expected
Any idea what i forgoted set up or I have mistake in?
How can I trace MySQL queries on my Linux server as they happen?
For example I'd love to set up some sort of listener, then request a web page and view all of the queries the engine executed, or just view all of the queries being run on a production server. How can I do this?
You can log every query to a log file really easily:
mysql> SHOW VARIABLES LIKE "general_log%";
+------------------+----------------------------+
| Variable_name | Value |
+------------------+----------------------------+
| general_log | OFF |
| general_log_file | /var/run/mysqld/mysqld.log |
+------------------+----------------------------+
mysql> SET GLOBAL general_log = 'ON';
Do your queries (on any db). Grep or otherwise examine /var/run/mysqld/mysqld.log
Then don't forget to
mysql> SET GLOBAL general_log = 'OFF';
or the performance will plummet and your disk will fill!
You can run the MySQL command SHOW FULL PROCESSLIST; to see what queries are being processed at any given time, but that probably won't achieve what you're hoping for.
The best method to get a history without having to modify every application using the server is probably through triggers. You could set up triggers so that every query run results in the query being inserted into some sort of history table, and then create a separate page to access this information.
Do be aware that this will probably considerably slow down everything on the server though, with adding an extra INSERT on top of every single query.
Edit: another alternative is the General Query Log, but having it written to a flat file would remove a lot of possibilities for flexibility of displaying, especially in real-time. If you just want a simple, easy-to-implement way to see what's going on though, enabling the GQL and then using running tail -f on the logfile would do the trick.
Even though an answer has already been accepted, I would like to present what might even be the simplest option:
$ mysqladmin -u bob -p -i 1 processlist
This will print the current queries on your screen every second.
-u The mysql user you want to execute the command as
-p Prompt for your password (so you don't have to save it in a file or have the command appear in your command history)
i The interval in seconds.
Use the --verbose flag to show the full process list, displaying the entire query for each process. (Thanks, nmat)
There is a possible downside: fast queries might not show up if they run between the interval that you set up. IE: My interval is set at one second and if there is a query that takes .02 seconds to run and is ran between intervals, you won't see it.
Use this option preferably when you quickly want to check on running queries without having to set up a listener or anything else.
Run this convenient SQL query to see running MySQL queries. It can be run from any environment you like, whenever you like, without any code changes or overheads. It may require some MySQL permissions configuration, but for me it just runs without any special setup.
SELECT * FROM INFORMATION_SCHEMA.PROCESSLIST WHERE COMMAND != 'Sleep';
The only catch is that you often miss queries which execute very quickly, so it is most useful for longer-running queries or when the MySQL server has queries which are backing up - in my experience this is exactly the time when I want to view "live" queries.
You can also add conditions to make it more specific just any SQL query.
e.g. Shows all queries running for 5 seconds or more:
SELECT * FROM INFORMATION_SCHEMA.PROCESSLIST WHERE COMMAND != 'Sleep' AND TIME >= 5;
e.g. Show all running UPDATEs:
SELECT * FROM INFORMATION_SCHEMA.PROCESSLIST WHERE COMMAND != 'Sleep' AND INFO LIKE '%UPDATE %';
For full details see: http://dev.mysql.com/doc/refman/5.1/en/processlist-table.html
strace
The quickest way to see live MySQL/MariaDB queries is to use debugger. On Linux you can use strace, for example:
sudo strace -e trace=read,write -s 2000 -fp $(pgrep -nf mysql) 2>&1
Since there are lot of escaped characters, you may format strace's output by piping (just add | between these two one-liners) above into the following command:
grep --line-buffered -o '".\+[^"]"' | grep --line-buffered -o '[^"]*[^"]' | while read -r line; do printf "%b" $line; done | tr "\r\n" "\275\276" | tr -d "[:cntrl:]" | tr "\275\276" "\r\n"
So you should see fairly clean SQL queries with no-time, without touching configuration files.
Obviously this won't replace the standard way of enabling logs, which is described below (which involves reloading the SQL server).
dtrace
Use MySQL probes to view the live MySQL queries without touching the server. Example script:
#!/usr/sbin/dtrace -q
pid$target::*mysql_parse*:entry /* This probe is fired when the execution enters mysql_parse */
{
printf("Query: %s\n", copyinstr(arg1));
}
Save above script to a file (like watch.d), and run:
pfexec dtrace -s watch.d -p $(pgrep -x mysqld)
Learn more: Getting started with DTracing MySQL
Gibbs MySQL Spyglass
See this answer.
Logs
Here are the steps useful for development proposes.
Add these lines into your ~/.my.cnf or global my.cnf:
[mysqld]
general_log=1
general_log_file=/tmp/mysqld.log
Paths: /var/log/mysqld.log or /usr/local/var/log/mysqld.log may also work depending on your file permissions.
then restart your MySQL/MariaDB by (prefix with sudo if necessary):
killall -HUP mysqld
Then check your logs:
tail -f /tmp/mysqld.log
After finish, change general_log to 0 (so you can use it in future), then remove the file and restart SQL server again: killall -HUP mysqld.
I'm in a particular situation where I do not have permissions to turn logging on, and wouldn't have permissions to see the logs if they were turned on. I could not add a trigger, but I did have permissions to call show processlist. So, I gave it a best effort and came up with this:
Create a bash script called "showsqlprocesslist":
#!/bin/bash
while [ 1 -le 1 ]
do
mysql --port=**** --protocol=tcp --password=**** --user=**** --host=**** -e "show processlist\G" | grep Info | grep -v processlist | grep -v "Info: NULL";
done
Execute the script:
./showsqlprocesslist > showsqlprocesslist.out &
Tail the output:
tail -f showsqlprocesslist.out
Bingo bango. Even though it's not throttled, it only took up 2-4% CPU on the boxes I ran it on. I hope maybe this helps someone.
From a command line you could run:
watch --interval=[your-interval-in-seconds] "mysqladmin -u root -p[your-root-pw] processlist | grep [your-db-name]"
Replace the values [x] with your values.
Or even better:
mysqladmin -u root -p -i 1 processlist;
This is the easiest setup on a Linux Ubuntu machine I have come across. Crazy to see all the queries live.
Find and open your MySQL configuration file, usually /etc/mysql/my.cnf on Ubuntu. Look for the section that says “Logging and Replication”
#
# * Logging and Replication
#
# Both location gets rotated by the cronjob.
# Be aware that this log type is a performance killer.
log = /var/log/mysql/mysql.log
Just uncomment the “log” variable to turn on logging. Restart MySQL with this command:
sudo /etc/init.d/mysql restart
Now we’re ready to start monitoring the queries as they come in. Open up a new terminal and run this command to scroll the log file, adjusting the path if necessary.
tail -f /var/log/mysql/mysql.log
Now run your application. You’ll see the database queries start flying by in your terminal window. (make sure you have scrolling and history enabled on the terminal)
FROM http://www.howtogeek.com/howto/database/monitor-all-sql-queries-in-mysql/
Check out mtop.
I've been looking to do the same, and have cobbled together a solution from various posts, plus created a small console app to output the live query text as it's written to the log file. This was important in my case as I'm using Entity Framework with MySQL and I need to be able to inspect the generated SQL.
Steps to create the log file (some duplication of other posts, all here for simplicity):
Edit the file located at:
C:\Program Files (x86)\MySQL\MySQL Server 5.5\my.ini
Add "log=development.log" to the bottom of the file. (Note saving this file required me to run my text editor as an admin).
Use MySql workbench to open a command line, enter the password.
Run the following to turn on general logging which will record all queries ran:
SET GLOBAL general_log = 'ON';
To turn off:
SET GLOBAL general_log = 'OFF';
This will cause running queries to be written to a text file at the following location.
C:\ProgramData\MySQL\MySQL Server 5.5\data\development.log
Create / Run a console app that will output the log information in real time:
Source available to download here
Source:
using System;
using System.Configuration;
using System.IO;
using System.Threading;
namespace LiveLogs.ConsoleApp
{
class Program
{
static void Main(string[] args)
{
// Console sizing can cause exceptions if you are using a
// small monitor. Change as required.
Console.SetWindowSize(152, 58);
Console.BufferHeight = 1500;
string filePath = ConfigurationManager.AppSettings["MonitoredTextFilePath"];
Console.Title = string.Format("Live Logs {0}", filePath);
var fileStream = new FileStream(filePath, FileMode.Open, FileAccess.ReadWrite, FileShare.ReadWrite);
// Move to the end of the stream so we do not read in existing
// log text, only watch for new text.
fileStream.Position = fileStream.Length;
StreamReader streamReader;
// Commented lines are for duplicating the log output as it's written to
// allow verification via a diff that the contents are the same and all
// is being output.
// var fsWrite = new FileStream(#"C:\DuplicateFile.txt", FileMode.Create);
// var sw = new StreamWriter(fsWrite);
int rowNum = 0;
while (true)
{
streamReader = new StreamReader(fileStream);
string line;
string rowStr;
while (streamReader.Peek() != -1)
{
rowNum++;
line = streamReader.ReadLine();
rowStr = rowNum.ToString();
string output = String.Format("{0} {1}:\t{2}", rowStr.PadLeft(6, '0'), DateTime.Now.ToLongTimeString(), line);
Console.WriteLine(output);
// sw.WriteLine(output);
}
// sw.Flush();
Thread.Sleep(500);
}
}
}
}
In addition to previous answers describing how to enable general logging, I had to modify one additional variable in my vanilla MySql 5.6 installation before any SQL was written to the log:
SET GLOBAL log_output = 'FILE';
The default setting was 'NONE'.
Gibbs MySQL Spyglass
AgilData launched recently the Gibbs MySQL Scalability Advisor (a free self-service tool) which allows users to capture a live stream of queries to be uploaded to Gibbs. Spyglass (which is Open Source) will watch interactions between your MySQL Servers and client applications. No reconfiguration or restart of the MySQL database server is needed (either client or app).
GitHub: AgilData/gibbs-mysql-spyglass
Learn more: Packet Capturing MySQL with Rust
Install command:
curl -s https://raw.githubusercontent.com/AgilData/gibbs-mysql-spyglass/master/install.sh | bash
If you want to have monitoring and statistics, than there is a good and open-source tool Percona Monitoring and Management
But it is a server based system, and it is not very trivial for launch.
It has also live demo system for test.