I'm trying to set up ACL. I've got it mostly working. However, I've got a couple of specific questions.
Basically, I'm trying to set up a group #group that will be allowed to access a bunch of branches of the form xxxx-integration-xxxx. What I want to do is:
[acl.allow.branches]
*integration* = #group
however, that doesn't seem to work. Is there an easy way to do this?
thanks
Try hooking on pretxnchangegroup and writing a python script that gets the branch and the user and figure it out in there. There is no ACL premade stuff for named branches that i know of.
Related
Sorry - I'm a total newbie with InstallShield. I've inherited an InstallShield 2013 project that presents the user with a dialog that let's the user select a SQL Server and based on their selection sets a value in a config file. That's not working, so I opened the project in IS and looked in the Text File Changes under System Configuration and there's nothing there that would do this. So how do I figure out where this is happening (or not happening in my case), and then how do I get it to work? I need to set both data source and initial catalog in a file called server.config.
So how do I determine what the user selected and then save that in this file? It looks like I can set up a Text File Change, but how do I access the values selected by the user? And how can I figure out where the "code" is that is supposed to be doing this?
Thanks,
Ben
I would try to track this from the dialog and controls in question, or by following the value through a verbose log. Since you say it doesn't work today, there will probably be an interruption in the flow I describe below, and since you don't know the full state of the installation project, it may be hard to identify. So search from what you know.
Top down: what gets configured
First, find the dialog that you fill out as a user making the selection. Then figure out the property that the particular control is associated with. Now you've got a thread; pull on it.
Search in the direct editor for references to the property. If the property is named MYCONFIG search for just that: MYCONFIG. You'll probably find some sort of use that looks like [MYCONFIG] instead, which is typically a format string specifying to use the value of MYCONFIG. You may also have to search all the files related to your project, as Custom Action implementations can be code stored outside of your InstallShield project.
The use may be in a ControlEvent, CustomAction, or some other table. If it's in a ControlEvent, it may be used to set another property. Ditto if it's in a CustomAction that sets properties (type 51) which may be easier to understand in the Custom Actions and Sequences view. In that case, also search for the property that gets set.
If you find it in a table like ISSearchReplace* or ISXml*, or IniFile, it's probably part of the Text Files Changes, XML File Changes, or INI File Changes, and that view should make it easier to understand.
Maybe that thread dead-ends somewhere. A property gets set, but never referenced. So try to search from the other end.
Bottom up: what gets written
If there are text file changes, xml file changes, ini file changes, or custom actions that reference the file you need updated, see where they get their information. Try to follow it back. If they're well written, you should be able to identify the property (noting that one called CustomActionData comes from a property matching the name of the custom action it's used in), and then trace that further back using the same ideas as above, but in the other direction.
Where's the problem?
If the threads don't connect, that's probably the problem. It's also possible that a custom action lacks permissions but doesn't reports a failure, or that the file name or path got misconfigured somewhere along the way. Look for small things like that if things look like they should work but don't.
It turns out that I misunderstood the problem and the project was never set up to change that value, so all I had to do was set up a Text File Change and it works perfectly. Thanks #Michael Urman for the thorough response - I really appreciate it!
I m using yii2 2.0-dev AdvancedTemplate and need to add another environment (API),
similar to the currently working Frontend, Backend.
I tried to copy the files and search trough the settings but there are still some errors
and I feel this is the wrong way to do it...
There should be automated/console way to do this... but I find nothing in the docs.
Any ideas ?
Just create folder API in /environments/[prod|dev|other] and call ./init command
While trying to import some Android projects into Eclipse, I have noticed that every file in the project is 0 bytes after they are imported. These projects are stored on Drive, so there is some chance of reverting them back to the previous version.
Reverting files to previous versions is easy to do when you've got a few files - you simply do it through a browser. However, I have hundreds of files and I need to fetch one revision back for each. I have been able to download a number of files by hand thus far, but there has to be a better way.
I have asked Google support and actually got a response back, but it's clear that there is no built-in functionality to do this. So I have started looking at the Drive API but I can see that there might be a bit of a learning curve.
Wondering if anyone has run into this before? Ideally I would like to identify one folder and for each file underneath, fetch the last version of the file. If anyone has a good approach for this, I would love to hear it.
thanks!
The pseudeo code to do what you want is
# get the id of the folder https://developers.google.com/drive/v2/reference/files/list
fid=file.list(q=title = 'foo')[0]
# get the children of that folder https://developers.google.com/drive/v2/reference/children/list
children = file.children(fid).maxresults=999
# for each child,
for id in children.id
# get the revisions https://developers.google.com/drive/v2/reference/revisions/get
revisions = file.revisions(id)
# iterate, or take item[1] whatever works best for you, and use its downloadUrl to fetch the file
With each call that you make, you'll need to provide an access token. For something like this, you can generate an access token using the oauth playground https://developers.google.com/oauthplayground/
You'll also need to register a project at the cloud/api console https://code.google.com/apis/console/
So ye, it's a disproportionate amount of learning to do something fairly simple. It's a few minutes work for somebody familiar with drive, and I would guess 3 days for somebody who isn't. You might want to throw it up on freelancer.com.
I tried to use my own custom roster by integrating mod_roster_odbc. I changed the config file too (commented out mod_roster and make a new entry for mod_roster_odbc). After running with this setup, mod_roster_odbc module is getting started ( I put some logs to in start function, those I can see). But none of other function is not getting called as I alter presence or logged out/logged in.
Please help to identify where I am making the mistake.
I think I know the answer to this. many websites tell you to use mod_roster_odbc.erl to create your own rostering. I believe thats your problem. Many of the functions are merged into mod_roster.erl file itself. I dont think this is mentioned anywhere.
So what you need to do is in ejabberd.cfg enable mod_roster_odbc but dont remove the mod_roster.erl file with the odbc file. This file will take care.
Finally you need to create a rosterusers table (or something like it) so that ejabber can query for friend list. After these changes, just restart ejabber server and you should be good to go. hope this helps.
I need to integrate aMember with Interspire. I need aMember to completely sync with Interspire. When users register for aMember, they are also placed in the Interspire database, and are placed in the right group so that we may restrict access.
I have searched for a plugin to do this, and haven't found anything. I have also tried to make the plugin myself, but I have found no basic samples of such a plugin. I looked on the Wiki but the info and examples there are not much help. I have also tried to look at other plugins for other systems, but sense those other systems are different from Interspire, the way they are handled is not exactly how you would handle integrating with Interspire, so I was wondering if there is something we can do to get this plugin made, Or some more examples to look at that better explain how to make the plugin myself.
I know this is an old question, however I have a solution I have used and it works. Just answering this in the event you never found the solution, or someone else stumbles upon this and needs an answer.
You don't need to create a plugin for aMember. Using cURL in PHP you can make 1 action perform 2 things at the same time.
You would need to modify the registration step. It has been a while since I looked in the amember code to tell you which php file to edit, ect and its different probably with different amember versions..
On your registration form you should have HTML code for the form, it's action URL should point you to the correct file. It would start something like:
<form action="registration.php" method="post" class="something">
rest of the code here...
So in that example, I would look at registration.php and it should then take the data the user entered and handle it. it probably checks if the users exists in your amember users, if not then it adds them. At that point, you know everything is good and if your amember is setup to then send the user to paypal, it may have code for starting the payment integration. Between those steps (after it added the user to your db and before it sends them off to go pay) add your own code. You could just add the php code right there to use curl and add them to interspire. My way, I would create a function and just add 1 line of code to this file to call that function.
AddToIEM(firstname,lastname,ip,email)
Then there is probably a functions.php file for amember. In that file, i would create a function to add take their info passed above and add them into your IEM.
Additionally, you could take the plugin amember has for Aweber integration and modify it to use Interspire.
This is just an idea outline, and not real working code. You will need to lookup curl and figure out how to use it to add them into your interspire.
You can do this pretty easily with the amember hook system. I actually will probably be doing this sometime soon. If I do, I'll try to post a snippet. In the meantime, just take a look at the signup hooks in amember.