Well, I have Manjaro/Linux 17.0, and I've tried to install MariaDB but I always get the same error:
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/run/mysqld/mysqld.sock' (2 "No such file or directory")
I don't know what to do, I've search in thousands of forums, I can't start the mariadb's deamon with systemctl, I tried to do a touch at /run/mysqld/mysqld.sock but then it refused my connection when I tried to start mariadb, and I tried to uninstall/reinstall MariaDB, but it's the same thing :(
In all my directories I can't find mysql.sock or similar.
Help me please!
I had the same problem, the solution which worked for me is https://serverfault.com/a/813123 , I just cleaned:
sudo rm /var/lib/mysql/*
then initialised the database:
mysql_install_db --user=mysql --basedir=/usr --datadir=/var/lib/mysql
It seems like there might be a difference between what the server is using as the socket and what the client thinks should be the socket.
You can check the process list (ps -ef | grep mysql) and see if the server is running with a different socket setting than you expect. (Look for --socket=.)
Edit your /etc/my.cnf, find or make a [client-server] section, and set socket to a file that makes sense. It should be in a directory that users have access to. The default setting is socket=/tmp/mysql.sock, so that should be a safe bet. Then remove any other socket setting elsewhere in /etc/my.cnf or files in the /etc/my.cnf.d/ directory. Then restart, and it should hopefully work.
Also check if you have a personal config file ~/.my.cnf, look for a socket setting in there, and if so remove it.
For reference, see the socket entry in the MariaDB KB. Also, have a look at the full list of locations where MariaDB config files could be stored here.
I have a LAMP stack setup. Occasionally, I get the following error message when I open some page from the browser:
Error creating the connection!: SQLSTATE[HY000] [2002] Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)
I think the server was configured correctly. The problem happens about every two months. Every time when I reboot the Linux server, or restart mysql, the problem was gone. I want to fix this problem permanently. Can anyone give me some idea?
Much appreciated.
EDIT
The problem occurs again and I checked the mysqld.sock file, it was not there. Do you have any idea how to fix the problem? – Ryan Jul 23 at 16:24
If your file my.cnf (usually in the /etc/mysql/ folder) is correctly configured with
socket=/var/run/mysqld/mysqld.sock
modified
#bind-address = 127.0.0.1
to
bind-address = localhost
you can check if mysql is running with the following command:
mysqladmin -u root -p status
try changing your permission to mysql folder. If you are working locally, you can try:
sudo chmod -R 755 /var/run/mysqld/
And then restart the mysql.
Good luck.
Could it be the log file getting too large and rebooting flushes it. See this in docs on server maintenance and logfiles. Also see discussion at digital ocean. Appears to be confirmed by discussion at serverfault
You could try change the permission of your MySQL sock file like this:
chmod 777 '/var/run/mysqld/mysqld.sock'
It is a test to see if whatever user mysqld is using, it will acess your mysqld.sock file. So, reboot your MySQL and change the permission of mysqld.sock. And you need to check that if your sock folder can be accessed through any mysqld process.
If the mysqld.sock file doesn't exist, that is to say your config file is not correct.Check your mysql config file in /etc/mysql/my.conf, find the socket config just as Vanya Avchyan says.
I think the socket config is /var/run/mysqld/mysqld.sock, but in fact your mysql process runs in other place sock file.
I used to met that problem, the real socket file exists in /tmp/mysqld.sock.
So run
sudo find / -name 'mysqld.sock'
to find the real sock file and change my.conf to this real place, restart your mysql. May have work.
environment
OS X El Capitan 10.11 , Mysql 5.6.26
What I did
mysql port was 3307 when I installed it. ( I didn't install it using brew.)
I changed the port 3306 to 3306 by editing /Library/LaunchDaemons/com.oracle.oss.mysql.mysqld.plist after using mysql with 3307 port for 6 months well.
I revised <string>--port=3307</string> to 3306.
I tried to stop and It didn't work. So I used following:
sudo kill -9 [PID]
It's killed and didn't start. So I changed the port 3006 to 3007.
I tried to start mysql server with following command and got a error.
sudo /usr/local/mysql/support-files/mysql.server start
ERROR! The server quit without updating PID file (/var/lib/mysql/nhnui-MacBook-Pro.local.pid).
And I found some helpful advices in follwing link.
reference link :
After MySQL install via Brew, I get the error - The server quit without updating PID file
I tried to change ownership of files, checking my.cnf file, checking error log file and all didn't work for me.
Finally, I removed /usr/local/mysql/datamysqld.local.err , /usr/local/mysql/datamysqld.local.pid and rebooted mac.and I can start mysql server.
The Problem
Then, the problem is above tip is not perfect for me.
mysql server was running after restarting mac. I checked it with 'ps-ef | grep mysql'.
Stop and start was success and then it didn't stop it again cause of same error!
Screenshot of the error :
Of course, I did it again (I mean deleting .err , .pid file / rebooting mac / cheking mysql ps / stop - start (well) / stop (got error)) and checked that it has same error.
Here is the error log : /usr/local/mysql/data/mysqld.local.err
Now, mysql server can't stop.
What can I do to solve this?
P.S - If it will be better to reinstall mysql, I should do that.
Make a backup of your system.
Dump your data into text files.
Uninstall everything releated to mySql (a quick Google search will point you to several how-tos)
Reinstall mySql from the package in the .dmg available from mySql website.
You can choose the latest 5.6.x or 5.7.x
Set the mySql root password and you're done.
When things get messy and all you can do is guessing what's the fix it's faster to reinstall given that a package installer is provided for mySql (you don't have to compile it yourself or play with brew/macports).
I recently tried installing MySQL with homebrew (brew install mysql) and when I try to run it I get the following error:
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/tmp/mysql.sock' (2)
There is no /tmp/mysql.sock nor a /var/lib/mysql.sock.
I've searched and haven't found any mysql.sock file.
How can I fix this?
When you got the server running via
mysql.server start
you should see the socket in /tmp/mysql.sock. However, the system seems to expect it in /var/mysql/mysql.sock. To fix this, you have to create a symlink in /var/mysql:
sudo mkdir /var/mysql
sudo ln -s /tmp/mysql.sock /var/mysql/mysql.sock
This solved it for me. Now my phpMyAdmin works happily with localhost and 127.0.0.1.
Credit goes to Henry
Warning, this will wipe your databases, take a backup if you wish to keep them
I had some directories left from another mysql(8.0) installation, that were not removed.
I solved this by doing the following:
First uninstall mysql
brew uninstall mysql#5.6
Delete the folders/files that were not removed
rm -rf /usr/local/var/mysql
rm /usr/local/etc/my.cnf
Reinstall mysql and link it
brew install mysql#5.6
brew link --force mysql#5.6
Enable and start the service
brew services start mysql#5.6
Looks like your mysql server is not started. I usually run the stop command and then start it again:
mysqld stop
mysql.server start
Same error, and this works for me.
Try to connect using "127.0.0.1" instead "localhost".
If you are able to see "mysql stopped" when you run below command;
brew services list
and if you are able to start mysql with below command;
mysql server start
this means; mysql is able to start manually, but it doesn't start automatically when the operating system is started. Adding mysql to services will fix this problem. To do so, you can run below command;
brew services start mysql
After that, you may restart your operating system and try connecting to mysql to see if it started automatically. I did the same and stop receiving below error;
ERROR 2002 (HY000): Can't connect to local MySQL server through socket
'/tmp/mysql.sock' (2)
I hope this helps.
The file /tmp/mysql.sock is probably a Named-Pipe, since it's in a temporary folder. A named pipe is a Special-File that never gets permanently stored.
If we make two programs, and we want one program to send a message to another program, we could create a text file. We have one program write something in the text file and the other program read what our other program wrote. That's what a pipe is, except it doesn't write the file to our computer hard disk, IE doesn't permanently store the file (like we do when we create a file and save it.)
A Socket is the exact same as a Pipe. The difference is that Sockets are usually used over a network -- between computers. A Socket sends information to another computer, or receives information from another computer. Both Pipes and Sockets use a temporary file to share so that they can 'communicate'.
It's difficult to discern which one MySql is using in this case. Doesn't matter though.
The command mysql.server start should get the 'server' (program) running its infinite loop that will create that special-file and wait for changes (listen for writes).
After that, a common issue might be that the MySql program doesn't have permission to create a file on your machine, so you might have to give it root privileges
sudo mysql.server start
Since I spent quite some time trying to solve this and always came back to this page when looking for this error, I'll leave my solution here hoping that somebody saves the time I've lost. Although in my case I am using mariadb rather than MySql, you might still be able to adapt this solution to your needs.
My problem
is the same, but my setup is a bit different (mariadb instead of mysql):
Installed mariadb with homebrew
$ brew install mariadb
Started the daemon
$ brew services start mariadb
Tried to connect and got the above mentioned error
$ mysql -uroot
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/tmp/mysql.sock' (2)
My solution
find out which my.cnf files are used by mysql (as suggested in this comment):
$ mysql --verbose --help | grep my.cnf
/usr/local/etc/my.cnf ~/.my.cnf
order of preference, my.cnf, $MYSQL_TCP_PORT,
check where the Unix socket file is running (almost as described here):
$ netstat -ln | grep mariadb
.... /usr/local/mariadb/data/mariadb.sock
(you might want to grep mysql instead of mariadb)
Add the socket file you found to ~/.my.cnf (create the file if necessary)(assuming ~/.my.cnf was listed when running the mysql --verbose ...-command from above):
[client]
socket = /usr/local/mariadb/data/mariadb.sock
Restart your mariadb:
$ brew services restart mariadb
After this I could run mysql and got:
$ mysql -uroot
ERROR 1698 (28000): Access denied for user 'root'#'localhost'
So I run the command with superuser privileges instead and after entering my password I got:
$ sudo mysql -uroot
MariaDB [(none)]>
Notes:
I'm not quite sure about the groups where you have to add the socket, first I had it [client-server] but then I figured [client] should be enough. So I changed it and it still works.
When running mariadb_config | grep socket I get:
--socket [/tmp/mysql.sock]
which is a bit confusing since it seems that /usr/local/mariadb/data/mariadb.sock is the actual place (at least on my machine)
I wonder where I can configure the /usr/local/mariadb/data/mariadb.sock to actually be /tmp/mysql.sockso I can use the default settings instead of having to edit my .my.cnf (but I'm too tired now to figure that out...)
At some point I also did things mentioned in other answers before coming up with this.
After installing macos mojave, had to wipe mysql folder under /usr/local/var/mysql and then reinstall via brew install mysql otherwise permission related things would come up all over the place.
In my case, the culprit was found in the logfiles:
$ tail /usr/local/var/mysql/<hostname>.lan.err
2019-09-19 7:32:21 0 [ERROR] InnoDB: redo log file './ib_logfile0' exists. Creating system tablespace with existing redo log files is not recommended. Please delete all redo log files before creating new system tablespace.
2019-09-19 7:32:21 0 [ERROR] InnoDB: Database creation was aborted with error Generic error. You may need to delete the ibdata1 file before trying to start up again.
So I renamed ib_logfile0 to get rid of the error (I had to do the same with ib_logfile1 afterwards).
mv /usr/local/var/mysql/ib_logfile0 /usr/local/var/mysql/ib_logfile0_bak
mv /usr/local/var/mysql/ib_logfile1 /usr/local/var/mysql/ib_logfile1_bak
brew services restart mariadb
I got the same error and this is what helped me:
$ln -sfv /usr/local/opt/mysql/*.plist ~/Library/LaunchAgents
$launchctl load ~/Library/LaunchAgents/homebrew.mxcl.mysql.plist
$mysql -uroot
mysql>
I faced the same problem on my mac and solved it, by following the following tutorials
https://mariadb.com/resources/blog/installing-mariadb-10116-mac-os-x-homebrew
But don't forget to kill or uninstall the old version before continuing.
Commands:
brew uninstall mariadb
xcode-select --install
ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)" - See more at: https://mariadb.com/resources/blog/installing-mariadb-10116-mac-os-x-homebrew#sthash.XQoxRoJp.dpuf
brew doctor
brew update
brew info mariadb
brew install mariadb
mysql_install_db
mysql.server start
Just to add to these answers, In my case I had no local mySQL server, it was running inside a docker container. So the socket file does not exist and will not be accessible for the "mysql" client.
The sock file gets created by mysqld and mysql uses this to communicate with it.
However if your mySql server is not running local, it does not require the sock file.
By specifying a host name/ip the sock file is not required e.g.
mysql --host=127.0.0.1 --port=3306 --user=xyz --password=xyz
If "mysqld" IS running, it's possible your data is corrupted. Try running this:
mysqld
Read through the wall of data, and check if mysqld is reporting that the database is corrupted. Corruption can present in many unintuitive ways:
mysql -uroot returns "ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/tmp/mysql.sock' (2)".
mysql.server start returns "ERROR! The server quit without updating PID".
Sequel Pro and MySQL Workbench responds that they can't connect to MySQL on localhost or 127.0.0.1.
To recover your data, open my.cnf and add the following line in the [mysqld] section:
innodb_force_recovery=1
Restart mysqld:
$ brew services restart mysql#5.6
Now you can connect to it, but it’s in limited read-only mode.
If you're using InnoDB, run this to export all your data:
$ mysqldump -u root -p --all-databases --add-drop-database --add-drop-table > data-recovery.sql
The file is created in your ~ dir. It may take some time.
Once finished, remove innodb_force_recovery=1 from my.cnf, then restart mysql in normal mode:
$ brew services restart mysql#5.6
Drop all the databases. I did this using Sequel Pro. This deletes all your original data. Make sure your data-recovery.sql looks good before doing this. Also consider backing up /usr/local/var/mysql to be extra careful.
Then restore the databases, tables, and data with this:
$ mysql -uroot < ~/data-recovery.sql
This can be a long import/restoration process. Once complete, you’re good to go!
Thanks go to https://severalnines.com/database-blog/my-mysql-database-corrupted-what-do-i-do-now for the recovery instructions. The link has further instructions on MyISAM recovery.
You'll need to run mysql_install_db - easiest way is if you're in the install directory:
$ cd /usr/local/Cellar/mysql/<version>/
$ mysql_install_db
Alternatively, you can feed mysql_install_db a basedir parameter like the following:
$ mysql_install_db --basedir="$(brew --prefix mysql)"
After a restart I could not connect with the local mariadb, a search also brought me to this page and I wanted to share my solution with you.
I noticed that the directory my.cnf.d in /usr/local/etc/ is missing.
This is a known bug with homebrew that is described and solved there. https://github.com/Homebrew/homebrew-core/issues/36801
fast way to fix: mkdir /usr/local/etc/my.cnf.d
When running mysql_secure_installation and entering the new password I got:
Error: Can't connect to local MySQL server through socket
'/tmp/mysql.sock' (2)
I noticed when trying the following from this answer:
netstat -ln | grep mysql
It didn't return anything, and I took that to mean that there wasn't a .sock file.
So, I added the following to my my.cnf file (either in /etc/my.cnf or in my case, /usr/local/etc/my.cnf).
Under:
[mysqld]
socket=/tmp/mysql.sock
Under:
[client]
socket=/tmp/mysql.sock
This was based on this post.
Then stop/start mysql again and retried mysql_secure_installation which finally let me enter my new root password and continue with other setup preferences.
This works for me:
brew upgrade mysql
If brew does not complete "postinstall"
I only have to use:
sudo chown -R $(whoami) /usr/local/*
then completed postinstall by:
brew postinstall mysql#5.7
next step just start mysql#5.7 service.
It worked for me on MacOS Monterey.
I also ran into this... it seemingly resulted from some leftover artifacts of multiple mysql installs on my dev machine. Every time I attempted to start or restart the mysql service it would crash. Ultimately, working through the err file helped me solve my issue.
Setup:
M1 Macbook Pro running OS 12 (Monterey)
Homebrew install of mysql#5.7
At various points during troubleshooting I tried uninstalling everything mysql in my Homebrew list, deleting /opt/homebrew/var/mysql, and reinstalling mysql#5.7 to no avail. I also tried restarting my machine.
I was able to validate what was happening when the service failed to start by reviewing the err (e.g., MyComputerName.local.err) log that it was spitting out into /opt/homebrew/var/mysql/ when I tried to start/restart the service via Homebrew. In the beginning, I was seeing things like this that pointed to issues with the config:
mysqld: Table 'mysql.plugin' doesn't exist
TIMESTAMPZ 0 [ERROR] Can't open the mysql.plugin table. Please run mysql_upgrade to create it.
TIMESTAMPZ 0 [ERROR] unknown variable 'mysqlx-bind-address=127.0.0.1'
TIMESTAMPZ 0 [ERROR] Aborting
I deleted my.cnf and my.cnf.default in /opt/homebrew/etc and attempted to start the service again. Then, the failure changed to this:
TIMESTAMPZ 0 [ERROR] Fatal error: Can't open and lock privilege tables: Table 'mysql.user' doesn't exist
TIMESTAMPZ 0 [ERROR] Fatal error: Failed to initialize ACL/grant/time zones structures or failed to remove temporary table files.
TIMESTAMPZ 0 [ERROR] Aborting
At this point I noticed several mysql lock files in /opt/homebrew/var/homebrew/locks/ (mysql.formula.lock, mysql.formula#5.7.lock, mysql.formula#8.0.lock); I deleted those files, as well as anything mysql in /opt/homebrew/var/homebrew/linked.
After that, I was able to start mysql without any issues.
just to complete this thread.
therefore MAMP (PRO) is used pretty often
the path here is
/Applications/MAMP/tmp/mysql/mysql.sock
I manually started mysql in the system preferences pane by initialising the database and then starting it. This solved my problem.
I had same problem. After trying all these methods without success I did the following:
tail -f the-mysql-or-maria-db-error-file.err
in another console:
brew services restart mariadb
I saw the following error:
"MAC HOMEBREW Crash recovery failed. Either correct the problem (if
it's, for example, out of memory error) and restart, or delete tc log
and start mysqld with"
So I changed the tc.log extesion to tc.log.txt and restart mariadb
brew services restart mariadb
and done!
[LINUX]
Though answer is expected to be for MacOS only but in Linux we may face the same Error.
I was facing the same issue in Linux. I ran this command:
sudo /etc/init.d/mysql.server start
and I was able to run the MySQL server
Ref. https://gist.github.com/vinodpandey/1a4b5b8228f9a000ca236820185fc3bc
I just ran into this problem, I did some tricks but for me it didn't work. If you used macOS, here is what I did. We start by uninstalling mysql and then reinstalling it.
brew uninstall mysql
brew install mysql
Note: you must have homebrew installed
This happened to me today 2023-02-23 after a homebrew update.
Homebrew had created a new my.cnf.default file, I backed up my old one and replaced it with this new default and restarted Mariadb and everything worked including the old root password.
For me, I had installed mariadb long time ago, then installed mysql#5.7.
When I executed mysql -uroot, I get the error:
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/tmp/mysql.sock' (2)
Reading the answers:
I uninstalled mariadb
Deleted the folder /usr/local/var/mysql
Ran the command mysqld --initialize
Then I was able to mysql -uroot -p