I have an instance of MySQL 5.0.4.1 with an application written in Hibernate. On one of the pages, I get the following error message in the server log:
Unknown character set index for field '123' received from server.at com.mysql.jdbc.Connection.getCharsetNameForIndex(Connection.java:1664)at com.mysql.jdbc.Field.(Field.java:144)at com.mysql.jdbc.MysqlIO.unpackField(MysqlIO.java:506)at com.mysql.jdbc.MysqlIO.getResultSet(MysqlIO.java:280)at com.mysql.jdbc.MysqlIO.sqlQueryDirect(MysqlIO.java:1319)at com.mysql.jdbc.MysqlIO.sqlQuery(MysqlIO.java:1218)at com.mysql.jdbc.Connection.execSQL(Connection.java:2233)at com.mysql.jdbc.Connection.execSQL(Connection.java:2193)at com.mysql.jdbc.Connection.execSQL(Connection.java:2174)at com.mysql.jdbc.Connection.setAutoCommit(Connection.java:536)at org.apache.commons.dbcp.DelegatingConnection.setAutoCommit(DelegatingConnection.java:268)at org.apache.commons.dbcp.PoolingDataSource$PoolGuardConnectionWrapper.setAutoCommit(PoolingDataSource.java:293)at org.hibernate.transaction.JDBCTransaction.toggleAutoCommit(JDBCTransaction.java:194)at org.hibernate.transaction.JDBCTransaction.rollbackAndResetAutoCommit(JDBCTransaction.java:186)at org.hibernate.transaction.JDBCTransaction.rollback(JDBCTransaction.java:162)at org.springframework.orm.hibernate3.HibernateTransactionManager.doRollback(HibernateTransactionManager.java:603)at org.springframework.transaction.support.AbstractPlatformTransactionManager.processRollback(AbstractPlatformTransactionManager.java:579)at org.springframework.transaction.support.AbstractPlatformTransactionManager.rollback(AbstractPlatformTransactionManager.java:556)at org.springframework.transaction.interceptor.TransactionAspectSupport.doCloseTransactionAfterThrowing(TransactionAspectSupport.java:284)at org.springframework.transaction.interceptor.TransactionInterceptor.invoke(TransactionInterceptor.java:100)at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:170)at org.acegisecurity.intercept.method.aopalliance.MethodSecurityInterceptor.invoke(MethodSecurityInterceptor.java:66)at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:170)at org.acegisecurity.intercept.method.aopalliance.MethodSecurityInterceptor.invoke(MethodSecurityInterceptor.java:66)at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:170)at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:176)at $Proxy6.getDataFromDatabase(Unknown Source)at org.myCompany.myAction.load(Unknown Source)at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)at java.lang.reflect.Method.invoke(Method.java:324)at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:274)at org.apache.struts.actions.DispatchAction.execute(DispatchAction.java:194)at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:419)at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:224)at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1196)at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)at javax.servlet.http.HttpServlet.service(HttpServlet.java:787)at javax.servlet.http.HttpServlet.service(HttpServlet.java:908)at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:247)at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)at org.acegisecurity.util.FilterChainProxy$VirtualFilterChain.doFilter(FilterChainProxy.java:264)at org.acegisecurity.intercept.web.FilterSecurityInterceptor.invoke(FilterSecurityInterceptor.java:107)at org.acegisecurity.intercept.web.FilterSecurityInterceptor.doFilter(FilterSecurityInterceptor.java:72)at org.acegisecurity.util.FilterChainProxy$VirtualFilterChain.doFilter(FilterChainProxy.java:274)at org.acegisecurity.ui.ExceptionTranslationFilter.doFilter(ExceptionTranslationFilter.java:110)at org.acegisecurity.util.FilterChainProxy$VirtualFilterChain.doFilter(FilterChainProxy.java:274)at org.acegisecurity.providers.anonymous.AnonymousProcessingFilter.doFilter(AnonymousProcessingFilter.java:125)at org.acegisecurity.util.FilterChainProxy$VirtualFilterChain.doFilter(FilterChainProxy.java:274)at org.acegisecurity.ui.AbstractProcessingFilter.doFilter(AbstractProcessingFilter.java:217)at org.acegisecurity.util.FilterChainProxy$VirtualFilterChain.doFilter(FilterChainProxy.java:274)at org.acegisecurity.context.HttpSessionContextIntegrationFilter.doFilter(HttpSessionContextIntegrationFilter.java:229)at org.acegisecurity.util.FilterChainProxy$VirtualFilterChain.doFilter(FilterChainProxy.java:274)at org.acegisecurity.util.FilterChainProxy.doFilter(FilterChainProxy.java:148)at org.acegisecurity.util.FilterToBeanProxy.doFilter(FilterToBeanProxy.java:98)at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:213)at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:280)at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:218)at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:209)at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)at com.iplanet.ias.web.connector.nsapi.NSAPIProcessor.process(NSAPIProcessor.java:157)at com.iplanet.ias.web.WebContainer.service(WebContainer.java:579)
This error occurs on a production environment so I don't know which query produced the problem, but I do know that none of my tables has a column named '123'. Do you have any suggestions about what might be causing this problem?
Edit: As a followup, I found that this behavior is a known bug in MySQL 5.0.4, but I haven't found a good wokaround since I don't have the option of upgrading mySQL.
Could be that somehow the character set for the field has been set to an invalid value, run this SQL on the server with the problem replacing the table name and the column 'Collation' will show the characterset for each varchar/char fields
SHOW FULL COLUMNS IN table_name;
You can then change the character set of a field by using the following:
ALTER TABLE t MODIFY col1 VARCHAR(50) CHARACTER SET latin1;
Internally, MySQL is mapping out the indexes across the columns. Normally this is done using integers that represent the column index. Most indexes are actually a compound index once built (col 1 + col 3) which form something like field 13.
Likely this happened when migrating data from dev into production when the stack is not an exact replica.
As 3urdoch mentioned you can pull the charset using internal MySQL function; and then change the table's charset to a compatible encoding.
Alternatively (where I'm willing to bet this issue came from) you can check if the loaded driver for the Production matches the loaded driver for the Other server. This will prevent re-occurring issue if the Development/Other server is still being used for testing, and migrated into Production.
Related
I have a problem with MySql.
My version of MYSql is : 5.7.33 - MySQL Community Server (GPL)
I have create a discord Bot in node.js, and i have a mistake when a new user with pseudo like this : legoshi🌌🌧
So i have try to follow this topic : How to fix "Incorrect string value" errors?
So i convert my Database in : utf8mb4_unicode_ci
And my error is still here.
At the begin my database was in utf8 and i have the error too.
code: 'ER_TRUNCATED_WRONG_VALUE_FOR_FIELD',
errno: 1366,
sqlMessage: "Incorrect string value: '\\xF0\\x9F\\x8C\\x8C\\xF0\\x9F...' for column 'user' at row 1",
sqlState: 'HY000',
index: 0,
sql: 'INSERT INTO registre (id, user, autohit, ultimate, platinium, `Date Inscription`) VALUES (210490816542670849, "legoshi🌌🌧", 0, 0, 0, CURRENT_TIMESTAMP())'
}
So i don't no how to change this. I have see a lot of topic and all seems to be fix with utf8mb4_unicode_ci but not in my case.
Thanks for you're help.
In MySQL, there are several places where you can set up a character set:
On the server level
On the database level
On the table level (for each table)
On the field level for all character-based fields
On your connection (telling the server what charset will be used in packets you send to the server)
Basically, server-level, database-level and table-level are just defaults for newly created items: New databases are generated with the server's default. New tables are created with the database's default, new fields are created with the table's default. However, only the field-level charset is what actually counts.
So first, you should make sure that the fields you want to store the data in actually are set up to utf8mb4_unicode_ci. Then, you need to connect to the server using exactly the same charset. Be aware that also the collation should match.
You can find out what character set is in use by issuing the following query:
SHOW VARIABLES LIKE 'character_set_%'
You'll see several variables indicating which default is set for various scopes. Have a look especially to the variables character_set_client and character_set_connection. If the connection does not have the correct character set specified, you need to set it up on connection.
It's a good practice to have all character sets match identically. Mixed values will sooner or later cause trouble.
To check the character set which is set up for the field, have it displayed with the command
SHOW CREATE TABLE registre
I'm trying to build a Data Integration job uses pass through to extract data from a view in a MySQL database.
Wev'e been using pass through a lot in the project, mostly extracting data from Redshift,
however with MySQL I was not able to do make it work properly.
It keeps complaining a table is missing even though when pass through is off, view is found and data is extracted...
tried every trick I know, starting from enabling case-sensitive DBMS object names, to manually remove single/double quotes from the statement just in case MySQL confuses confuses it with something else...
No luck.
ODBC driver is [MySQL][ODBC 5.3(a) Driver][mysqld-5.5.53].
Ran on a Windows environment.
Any idea how to solve this?
Thank you in advance.
EDIT
So, first of all, one correction (even though not that important - I extract from a view, not a table).
This is the code generated by SAS Create Table transformation, pass through enabled. I only put an asterisk instead of the full list of columns:
proc sql;
connect to ODBC
(
READBUFF=10000 DATASRC="cmp.web_api" AUTHDOMAIN="MYSQL_CMP_Auth"
);
create table work."W7ZZZKOC"n as
select
*
from connection to ODBC
(
select
V_BI_ACCOUNT.ACCOUNT_NAME,
V_BI_ACCOUNT.ACQUISITION_SOURCE__C,
V_BI_ACCOUNT.ZUORA__ACTIVE__C,
V_BI_ACCOUNT.ADDRESS_LINE_1__C,
V_BI_ACCOUNT.ADDRESS_LINE_2__C,
V_BI_ACCOUNT.ADDRESS_LINE_3__C,
V_BI_ACCOUNT.AGREEMENT_DATE,
V_BI_ACCOUNT.AGREEMENT_LEGAL_CLAUSE_1__C,
V_BI_ACCOUNT.AGREEMENT_LEGAL_CLAUSE_2__C,
V_BI_ACCOUNT.PERSONBIRTHDATE,
V_BI_ACCOUNT.BLOCKED_REASON__C,
V_BI_ACCOUNT.BRAND__C,
V_BI_ACCOUNT.CPN__C,
V_BI_ACCOUNT.ACCCREATEDBYID,
V_BI_ACCOUNT.ACCCREATEDDATE,
V_BI_ACCOUNT.CURRENCY_PREFERENCE__C,
V_BI_ACCOUNT.CUSTOMER_FULL_NAME__PC,
V_BI_ACCOUNT.ACCOUNTID,
V_BI_ACCOUNT.ZUORA__CUSTOMERPRIORITY__C,
V_BI_ACCOUNT.DELIVERY_SALUTATION__C,
V_BI_ACCOUNT.DISPLAY_NAME,
V_BI_ACCOUNT.PERSONEMAIL,
V_BI_ACCOUNT.EMAILKEY__C,
V_BI_ACCOUNT.FACEBOOKKEY,
V_BI_ACCOUNT.FIRSTNAME,
V_BI_ACCOUNT.GENDER__C,
V_BI_ACCOUNT.PHONE,
V_BI_ACCOUNT.ACCLASTACTIVITYDATE,
V_BI_ACCOUNT.ACCLASTMODIFIEDDATE,
V_BI_ACCOUNT.LASTNAME,
V_BI_ACCOUNT.OTHER_EMAIL__C,
V_BI_ACCOUNT.PI_TYPE__C,
V_BI_ACCOUNT.ACCPARENTID,
V_BI_ACCOUNT.POSTCODE__C,
V_BI_ACCOUNT.PRIMARY_ACCOUNT_OF_THIS_CUSTOMER,
V_BI_ACCOUNT.ACCPRIMARY__C,
V_BI_ACCOUNT.ACCREASON_FOR_STATUS__C,
V_BI_ACCOUNT.ZUORA__SLA__C,
V_BI_ACCOUNT.ZUORA__SLASERIALNUMBER__C,
V_BI_ACCOUNT.SALUTATION,
V_BI_ACCOUNT.ACCSYSTEMMODSTAMP,
V_BI_ACCOUNT.PERSONTITLE,
V_BI_ACCOUNT.ZUORA__UPSELLOPPORTUNITY__C,
V_BI_ACCOUNT.X_CODE__C,
V_BI_ACCOUNT.ZUORA__ACCOUNT_ID__C,
V_BI_ACCOUNT.ZUORA__PAYMENTMETHODID__C,
V_BI_ACCOUNT.CITY,
V_BI_ACCOUNT.ORIGINAL_CREATED_DATE,
V_BI_ACCOUNT.SOURCE_SYSTEM_ID,
V_BI_ACCOUNT.STATUS,
V_BI_ACCOUNT.ZUORA__CONTACT_ID,
V_BI_ACCOUNT.ACCISDELETED,
V_BI_ACCOUNT.BILLING_ACCOUNT_NAME,
V_BI_ACCOUNT.ACZCREATEDDATE,
V_BI_ACCOUNT.ACZSYSTEMMODSTAMP,
V_BI_ACCOUNT.ACZLASTACTIVITYDATE,
V_BI_ACCOUNT.ZUORA__ACCOUNT__C,
V_BI_ACCOUNT.ZUORA__ACCOUNTNUMBER__C,
V_BI_ACCOUNT.ZUORA__AUTOPAY__C,
V_BI_ACCOUNT.ZUORA__BALANCE__C,
V_BI_ACCOUNT.ZUORA__CREDITCARDEXPIRATION__C,
V_BI_ACCOUNT.ZUORA__CURRENCY__C,
V_BI_ACCOUNT.ZUORA__MRR__C,
V_BI_ACCOUNT.ZUORA__PAYMENTTERM__C,
V_BI_ACCOUNT.ZUORA__PURCHASEORDERNUMBER__C,
V_BI_ACCOUNT.ZUORA__LASTINVOICEDATE__C,
V_BI_ACCOUNT.COUNTRY_NAME,
V_BI_ACCOUNT.COUNTRY_CODE,
V_BI_ACCOUNT.FAVOURITE_FOOTBALL_CLUB,
V_BI_ACCOUNT.COUNTY
from
web_api.V_BI_ACCOUNT as V_BI_ACCOUNT
);
%rcSet(&sqlrc);
disconnect from ODBC;
quit;
And again, when I extract data without pass through - works successfully,
I found out the problem was a column name exceeds 32 positions.
As SAS supports up column names up to 32,
the query fails to find PRIMARY_ACCOUNT_OF_THIS_CUSTOMER as the original column name is PRIMARY_ACCOUNT_OF_THIS_CUSTOMER__C.
EDIT
One more thing I found out is, MySQL doesn't like specifying schema name nor aliases.
Therefore,
From clause to only specify table name i.e : 'from v_bi_account' rather than 'web_api.v_bi_account'
and do not use aliases i.e use 'from v_bi_account' rather than 'from v_bi_account as v_bi_account'
Thank you guys so much for your help.
I was trying my first 'Helloworld' application in Cassandra. Whenever I try to add any data to my keyspace column family I get this error:
[default#MyKeyspace] set User['ehewitt'] ['fname']='Eben';
org.apache.cassandra.serializers.MarshalException: cannot parse 'fname' as hex bytes
This is despite the fact that I have executed
[default#MyKeyspace] assume Users keys as utf8;
So the above command does not seem to have any effect at all. How do I solve this issue?
Cassandra is assuming the columns as bytes.
Check with
help assume;
assume User keys as ascii;
assume User comparator as ascii;
assume User validator as ascii;
assume User sub_comparator as ascii;
set User['ehewitt']['fname']='Eben';
Value inserted.
Elapsed time: 216 msec(s).
I had similar problem, but the cli told me that the value is what cannot be parsed.
set game_outcome['1']['userId']='123asdasd';
cannot parse '123asdasd' as hex bytes
so I tried to use utf8 function like this :
set game_outcome['1']['userId']=utf8('123asdasd');
cannot parse '123asdasd' as hex bytes
Try
set User['ehewitt'] [utf8('fname')]='Eben'
I tried to use set some assumption like this
assume validator keys as utf8;
validator not found in current keyspace.
But as you can see it did not work as well !
I hope this answer helps.
Starting the CLI
You can start the CLI using the bin/cassandra-cli script in your Cassandra installation (bin\cassandra-cli.bat on windows). If you are evaluating a local cassandra node then be sure that it has been correctly configured and successfully started before starting the CLI.
If successful you will see output similar to this:
Welcome to cassandra CLI.
Type 'help;' or '?' for help. Type 'quit;' or 'exit;' to quit.
You must then specify a system to connect to:
connect localhost/9160;
Creating a Keyspace
We first create a keyspace to run our examples in.
create keyspace Twissandra;
Selecting the keyspace to user
We must then select our example keyspace as our new context before we can run any queries.
use Twissandra;
To Create A Column
We can then create a column to play with.
create column family User with comparator = UTF8Type;
For the later examples to work you must also update the schema using the following command. This will set the return type for the first and last name to make them human readable. It will also add and index for the age field so that you filter your gets using the Users name field.
update column family User with
column_metadata =
[
{column_name: first, validation_class: UTF8Type},
{column_name: last, validation_class: UTF8Type},
{column_name: age, validation_class: UTF8Type, index_type: KEYS}
];
To Add Data
To add data we want to into our new column we must first specify our default key type otherwise we would have to specify it for each key using the format [utf8('keyname')] this is probably advisable if you have mixed key types but makes simple cases harder to read.
So we run the command below, which will last the length of you cli session. On quitting and restarting we must run it again.
assume User keys as utf8;
and then we add our data.
set User['jsmith']['first'] = 'John';
set User['jsmith']['last'] = 'Smith';
set User['jsmith']['age'] = '38';
If you get the error like this cannot parse 'John' as hex bytes, then it likely you either haven't set your default key type or you haven't updated your schema as in the create column example.
To Update Data
If we need to update a value we simply set it again.
set User['jsmith']['first'] = 'Jack';
To Get Data
Now let's read back the jsmith row to see what it contains:
get User['jsmith'];
The get command uses API#get_slice
To Query Data
get User where age = '12';
I have acreated a Table containing a column of type INT:
CREATE TEMPORARY TABLE `myTab` (`int` INT, `text` TEXT, `float` FLOAT);
Now I try to add a float value into the INT column
INSERT INTO `myTab` (`int`) VALUES (13.34);
I don't get a warning:
SHOW WARNINGS;
Although the column contains only 13 afterwards:
SELECT * FROM `myTab`;
Is it somehow possible to get a warning when a float value is added to a integer column? I'm currently using mysql Ver 14.14 Distrib 5.5.31, for debian-linux-gnu (i686) using readline 6.2
Add: I'd like to avoid adding a "check for dots" for each INT-column (How do I check to see if a value is an integer in MySQL?). I'd prefer a warning when data is lost during casting to INT.
You could use a DECIMAL(n, 0) type instead of INT. Attempting to insert a non-integer number into such a column does raise a warning.
CREATE TEMPORARY TABLE t (id DECIMAL); -- equivalent to the default DECIMAL(10, 0), which covers the range of INT
INSERT INTO t VALUES (0.9); -- raises warning "1265 - Data truncated for column 'id' at row 1"
SELECT * FROM t; -- 0.9 was rounded to 1
I am aware this is only a workaround, and certainly has a negative impact on performance (albeit probably minor). But this is the only approaching solution I have been able to come up with.
EDIT: I have tested different scenarios to try an get a warning or a least an error for this but with no luck so i suspect that its either a intended behavior or its a mysql bug (although i didn't found a already known bug that describes this) so i think the best/only solution is the one posted by YaK
Use this:
TRADITIONAL
Make MySQL behave like a “traditional” SQL database system. A simple
description of this mode is “give an error instead of a warning” when
inserting an incorrect value into a column.
set global sql_mode="TRADITIONAL";
For more info read this.
UPDATE: what i purposed above is to get a error instead of a warning because with the warning the data is still inserted thus you will have corrupt data but if you still want to use warnings instead of errors then you have to use the default sql_mode:
set global sql_mode="";
EDIT: be sure that the warnings are enabled :
set global sql_warnings=1;
better yet you can add it in the config file my.cnf so that it will not be overwritten when mysql restarts .
I've searched and can't seem to find quite what I'm looking for.
I'm running a PL/SQL script in Oracle, and attempting to insert records into a table in MySQL via database link using MySQL ODBC 5.2 Unicode Driver.
The link works fine, I can do complex queries in Oracle using it, and do various inserts and updates on records there.
Where it fails is in trying to insert a record into a MySQL table that has a column of type bit(1).
It is basically a cursor for loop, with the insert statement looking something like:
INSERT INTO "app_user"#mobileapi (USERNAME, VERSION, ACCOUNT_EXPIRED, ACCOUNT_LOCKED, PASSWD, PASSWORD_EXPIRED)
VALUES (CU_rec.USERNAME, CU_rec.VERSION, CU_rec.ACCOUNT_EXPIRED, CU_rec.ACCOUNT_LOCKED, CU_rec.PASSWD, CU_rec.PASSWORD_EXPIRED)
Some of the target columns, like ACCOUNT_EXPIRED, ACCOUNT_LOCKED, etc. are the bit(1) columns in MySQL. Given that I can convert the data types in the cursor CU_rec to pretty much anything I want in Oracle, how can I get them inserted into the target? I've tried everything I can think of, and I just keep getting:
Error report:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[MySQL][ODBC 5.2(w) Driver][mysqld-5.6.10]Data too long for column 'ACCOUNT_EXPIRED' at row 1 {HY000,NativeErr = 1406}
ORA-02063: preceding 2 lines from MOBILEAPI
ORA-06512: at line 44
28500. 00000 - "connection from ORACLE to a non-Oracle system returned this message:"
*Cause: The cause is explained in the forwarded message.
*Action: See the non-Oracle system's documentation of the forwarded
message.
Any help at all would be greatly appreciated.
Your problem is Oracle's default datatype conversion over ODBC; according to their own documentation they convert SQL_BINARY to a raw. Although not directly related, Oracle's comparison of MySQL and Oracle within SQL Developer also alludes to the fact that the automatic conversion from a MySQL bit is to an Oracle raw.
Extremely confusingly, MySQL's documentation indicates that a bit is converted to a SQL_BIT or a SQL_CHAR, which implies that it may work in the other direction1.
According to Microsoft's ODBC docs you should, theoretically, be able to use the CONVERT() function to transform this into a character, which should, theoretically, be translatable by MySQL.
insert into some_table#some_db (bit_col)
values( {fn convert(some_col, SQL_CHAR)} );
Failing that there's another couple of options, but it does depend on what you're attempting to insert into the MySQL database from Oracle and what the datatype is in Oracle. For instance you could use the Oracle CAST() function to convert between datatypes. For instance, the following would convert an integer to a binary double.
select cast(1 as binary_double) from dual
Unfortunately, you can't cast an integer to a raw, only a character or a rowid, so in order to convert to a raw you'd have to do the following:
select cast(to_char(1) as raw(1)) from dual
I've no idea whether MySQL will accept this but with some testing you should be able to work it out.
1. For clarity, I've never tried it in either direction.
Hah! I found a solution. Dropping it here in case it helps someone else. It's not pretty, but it works.
I used the old EXECUTE IMMEDIATE trick.
Basically, I created a variable sql_stmt varchar2(4000) and wrote code like:
sql_stmt := 'insert into "app_user"#mobileapi (USERNAME, VERSION, ACCOUNT_EXPIRED, ACCOUNT_LOCKED, CIPHER_PASSPHRASE, ENABLED, PASSWD, PASSWORD_EXPIRED)
values ('''||CU_rec.USERNAME||'','||CU_rec.VERSION||', '||CU_rec.ACCOUNT_EXPIRED||', '||CU_rec.ACCOUNT_LOCKED||', '''||CU_rec.CIPHER_PASSPHRASE||''', '||
CU_rec.ENABLED||', '''||CU_rec.PASSWD||''', '||CU_rec.PASSWORD_EXPIRED||')';
EXECUTE IMMEDIATE sql_stmt;
Something like that anyway (the quotes might not line up, as I hacked this a bit from the actual code). Looking at the contents of sql_stmt, I get:
insert into "app_user"#mobileapi (USERNAME, VERSION, ACCOUNT_EXPIRED, ACCOUNT_LOCKED, CIPHER_PASSPHRASE, ENABLED, PASSWD,PASSWORD_EXPIRED)
values ('user#email.com', 0, 0, 0, 'asdfastrwaebawavgansdhnsgjsjsh', 1, 'awercbcakwjerhcawuerawieubkahbewvkruh', 0)
The EXECUTE IMMEDIATE completes, and checking the target table, the values are there.
Possibly a crappy solution, but better than nothing.