Do you use tense when naming methods of boolean return type? - language-agnostic

Question

So, when you are writing a boolean method, do you use tense, like "has" or "was", in your return method naming, or do you solely use "is"?
The following is a Java method I recently wrote, very simply ..
boolean recovered = false;
public boolean wasRecovered()
{
return recovered;
}
In this case, recovered is a state that may or may not have already occurred at this point in the code, so grammatically "was" makes sense. But does it make the same sense in code, where the "is" naming convention is usually standard?

Answer 1

I prefer to use IsFoo(), regardless of tense, simply because it's a well-understood convention that non-native speakers will still generally understand. Non-native speakers of English are a regular consideration in today's global dev't industry.

Answer 2

I use the tense which is appropriate the meaning of the value. To do otherwise essentially creates code which reads one way and behaves another. Lets look at a real world example in the .Net Framework: Thread.IsAlive
This property is presented with the present tense. This has the implication the value refers to the present and makes code like the following read very well
if (thread.IsAlive ) {
// Code that depends on the thread being alive
...
The problem here is that the property does not represent the present state of the object it represents a past state. Once the value is calculated to be true, the thread in question can immediately exit and invalidate the value. Hence the value can only safely be used to identify the past state of the thread and a past tense property is more appropriate. Lets now revisit the sample which reads a bit differently
if ( thread.WasAlive ) {
// Code that depends on the thread being alive
...
They behave the same but one reads very poorly because it in fact represents poor code.
Here's a list of some other offenders
File.Exists
Directory.Exists
DriveInfo.IsReady
WeakReference.IsAlive

Answer 3

The isXxx prefix is a widespread naming convention, so it's generally the best choice.
For order-sensitive operations, wasXxx is appropriate. For example, in JDBC, retrieving the value of a database column might return zero when the field is actually NULL (unset); in this case, a follow-up call to wasNull determines which it is after the actual retrieval was performed.
For retrieving attribute settings, hasXxx may be more appropriate. It's a grammar preference, as in "the object's flag is set" versus "the object has an attribute".
Then there are capability tests canXxx. For example, calling canWrite to see if a file is writable. But names like these can probably be renamed to the isXxx form, such as isWritable.

Answer 4

I tend to, yes. For example in error checking:
$errors = false;
public function hasErrors()
{
return $this->errors;
}

Answer 5

I am not sure that you are thinking about this correctly. The reason one would use the Recovered property is because that is the state the object is in now, not because that was the state the object used to be in. There may have been some process in the past (The Recovery) that has now completed, but the fact that we are accessing this property now means that there is something about that completed process that altered current state, and that current state is important. To me "Recovered" captures the nature of that state. For this example (and most similar situations) I would use IsRecovered to name the predicate that indicates this condition. (This also matches normal English: "This is a recovered document.")
It is extremely rare that I would use anything other than present tense to name a predicate (IsDirty, HasCoupon) or boolean function (IsPrime(x)) in a program.
An exception would be to indicate state that has since been changed that might need to be reinstated (DocumentWindow.WasMaximizedAtLastExit).
I would usually use an infinitive for future tense (ToBeCopied rather than WillBeCopied), since the best laid plans of software are sometimes altered (or cancelled).

Answer 6

It depends on whether or not you care about the past or future state of the property in question.
To try to simplify the semantics, realize that there are a few scenarios that make the IsXXX form debatable and some very common scenarios where the IsXXX form is the only useful one.
Below is the 'truth table' for Thread.IsAlive() based on possible states of the thread over time. Forget about why a thread might flip flop states, we need to focus on the language used.
Scenarios of possible thread states over time:
Past Present Future
===== ======= =======
1. alive alive alive
2. alive alive dead
3. alive dead dead
4. dead dead dead
5. dead dead alive
6. dead alive alive
7. dead alive dead
8. alive dead alive
Note: I talk about the Future state below for consistency. Knowing whether a thread will die is very likely unknowable as a subset of The Halting Problem)
When we interrogate an object by calling a method, there is a common assumption "Is this thread alive, at the time I asked? For these cases, the answer in the "Present" column is all we care about and using the IsXXX form works fine.
Scenarios #1(always alive) and #4(always dead) are the simplest and most common. The answer to IsAlive() will not change between calls. The battle over language that comes up is due to the other 6 cases where the result of calling IsAlive() depends on when it is called.
Scenarios #2(will die) and #3(has died) transitions from alive to dead.
Scenarios #5(will start) and #6(has started) transitions from dead to alive.
For these four (2, 3, 5, 6) the answer to IsAlive() is not constant. The question becomes, do I care about the Present state, IsAlive(), or am I interested in the Past/Future state, WasAlive() and WillBeAlive()? Unless you can predict the future, the WillBeAlive() call becomes meaningless for all but the most specific designs.
When dealing with a thread pool, we might need to restart threads that are in the 'dead' state to service connect requests and it doesn't matter whether they were ever alive, just that they are currently dead. In this case we might actually want to use WasDead(). Of course we should try to guarantee we don't restart a thread that was just restarted but that is a design problem, not a semantic one. Assuming that no one else can restart the thread, it doesn't matter much whether we use IsAlive() == false or WasDead() == true.
Now for the last two scenarios. Scenario #7(was dead, is alive, will be dead) is practically the same as #6. Do you know when in the future it will die? In 10 seconds, 10 minutes, 10 hours? Are you going to wait before deciding what to do. No, you only care about the current (Present) state. We're talking about naming here, not multi-threaded design.
Scenario #8(was alive, is dead, will be alive), is practically the same as #3. If you are reusing threads, then they can cycle through the alive/dead states several times. Worrying about the difference between #3 and #8 goes back to the Halting Problem and so can be disregarded.
IsAlive() should work for all cases. IsAlive() == false works (for #5 and #6) instead of adding WasAlive().

Answer 7

I don't mind wasRecovered that much. Recovery is a past event that may or may not have happened - this tells you whether it did or not. But if you're using it because of some consequence of recovery, I'd prefer isCached, isValid, or some other description of what those consequences actually are. Just because you've recovered something doesn't inherently mean you haven't lost it again since.
Always beware that in English, the use of a past participle as an adjective is ambiguous between transitive and intransitive verbs (and perhaps between active and passive voice). isRecovered might mean that the object has been recovered by something else, or it might mean that the object has recovered. If your object represents a patient at a hospital, does "isRecovered" mean that the patient is fit and well, or that someone has fetched the patient back from the X-ray department? wasRecovered might therefore be better for the latter.

Answer 8

The conceit for method naming is that you are retrieving information about the object in question. For it to be named in the past tense, it would have to be information about a previous state of the object, rather than its current state.
The only reason I could ever think of for using past tense is if I was checking a cached result of something that previously occurred but is no longer the case. For a contrived example, perhaps retriveing the previous value after something like a swap() call. It could be useful in operations that are atomic by design. Not real likely in the wild though.

Answer 9

Since your question is specific to Java, the method name should start with "is" if your class is a JavaBean and the method is an accessor method for a property.
http://download.oracle.com/javase/tutorial/javabeans/properties/properties.html