Is there any nice command line MySQL client for windows? I mean a single exe that allows connecting and running a sample query. I've googled and only could find big graphical environments like toad or mysql workbench. I need only a simple command line tool, where can I download sth like this?
EDIT: I don't want to install the whole MySQL package on my PC. I know it's inside the mysql package but how do I download only this cmd line client. Because i don't need anything else.
When you go to the MySQL download page, choose the platform "Microsoft Windows". Then download the "Windows (x86, xx-bit), ZIP Archive" (be sure to select the one with size over 140M.
The binaries will be in the "bin" folder.
I understand that this is not just the client binaries, but at least you don't have to install and setup the entire server.
mysql.exe can do just that....
To connect,
mysql -u root -p (press enter)
It should prompt you to enter root password (u = username, p = password)
Then you can use SQL database commands to do pretty much anything....
You can choose only install the client during server install. The website only offers to let you download the full installer (grab whatever version you want from http://www.mysql.com/downloads/mysql/).
In the install wizard, when prompted for installation type (typical, minimal, custom), choose 'Custom'. On the next screen, select to NOT install the server, and proceed with the rest of the install as normal.
When you're done, you should see just the relevant client programs (mysql, mysqldump, etc) in C:\Program Files\MySQL..\bin
Its pretty simple. I saved the mysql community server in my D:\ drive. Hence this is how i did it.
Goto D:\mysql-5.7.18-winx64\bin and in the address bar type cmd and press enter, so command prompt will open. Now if you're using it for the first time type as mysql -u root -ppress enter. Then it will ask for password, again press enter. Thats it you are connected to the mysql server.
Before this make sure wamp or xampp any of the local server is running because i couldn't able to connect to mysql wihthout xampp running.
Happy Coding.
You can also download MySql workbench (31Mo) which includes mysql.exe and mysqldump.exe.
I successfully tested this when i had to run Perl scripts using DBD:MySql module to run SQL statements against a distant MySql db.
You can access mySQL in command line just by typing:
C:\www\mysql\bin> mysql -u root -p
After which you can type sql commands normally such as:
mysql> SHOW DATABASES;
Here, I am assuming you mySQL installation directory is C:\www\mysql.
I have similar requirement where I need a MySQL client but not server (running in a virtual machine and don't want any additional overhead) and for me the easiest thing was to install MySQL community server taking typical installation options but NOT configure the server, so it never starts, never runs. Added C:\Program Files (x86)\MySQL\MySQL Server 5.5\bin to system path environment variable and I'm able to use the MySQL command line client mssql.exe and mysqladmin.exe programs.
If you are looking for tools like the the mysql and mysqldump command line client for Windows for versions around mysql Ver 14.14 Distrib 5.6.13, for Win32 (x86) it seems to be in HOMEDRIVE:\Program Files (x86)\MySQL\MySQL Workbench version
This directory is also not placed in the path by default so you will need to add it to your PATH environment variable before you can easily run it from the command prompt.
Also, there is a mysql utilities console but it does not work for my needs. Below is a list of the capabilities on the mysql utilities console in case it works for you:
Utility Description
---------------- ---------------------------------------------------------
mysqlauditadmin audit log maintenance utility
mysqlauditgrep audit log search utility
mysqldbcompare compare databases for consistency
mysqldbcopy copy databases from one server to another
mysqldbexport export metadata and data from databases
mysqldbimport import metadata and data from files
mysqldiff compare object definitions among objects where the
difference is how db1.obj1 differs from db2.obj2
mysqldiskusage show disk usage for databases
mysqlfailover automatic replication health monitoring and failover
mysqlfrm show CREATE TABLE from .frm files
mysqlindexcheck check for duplicate or redundant indexes
mysqlmetagrep search metadata
mysqlprocgrep search process information
mysqlreplicate establish replication with a master
mysqlrpladmin administration utility for MySQL replication
mysqlrplcheck check replication
mysqlrplshow show slaves attached to a master
mysqlserverclone start another instance of a running server
mysqlserverinfo show server information
mysqluserclone clone a MySQL user account to one or more new users
mysql.exe is included in mysql package. You don't have to install anything additionally.
download the mysql-5.0.23-win32.zip (this is the smallest possible one) from archived versions in mysql.com website
cut and paste the installation in c drive as mysql folder
then install then follow instructions as per this page:
https://cyleft.wordpress.com/2008/07/20/fixing-mysql-service-could-not-start-1067-errors/
For Windows users:
1.Install the full version of MYSQL
2.On the Windows 10 start button click on search and type in MySQL
3. Select the MYSQL Command Line Client 5.5 (I am using version 5.5)
4. go ahead and run your sql queries/
5. to exit type \q or quit
Related
How do I install MySQL Workbench properly? Can't connect to the SQLTools extension in VSCode.I'm new to the database scene, and can't seem to grasp how to create a successful SQL server that I can use to manipulate data. But nothing I'm doing seems to work.
Should I use Gitbash to access the terminal? I tried using my password to make a new query but it wouldn't work on the workbench. I don't know how to start the SQL server in addition to not knowing how to properly change the profile for the Workbench from a previous account. A new developer, such as myself, would appreciate any insight!
So that's really simple just install the mysql community server installer using this link https://dev.mysql.com/downloads/mysql/
Make sure to select the server only in the setup during installation if you are going to be using VS code as the client to manipulate sql queries
Then once that is done copy the bin path location from the mysql file directory (which is usually in the program files on your \C: drive on your computer) to the environment variables on your computer so that you can access mysql from the command line
Once that is done you can initialise a database from the normal command line but first type mysql -u root -p to start mysql in the command line
Then download the sql tools extension on vs code and create the database that wish
Good Morning Stack Exchange!
Trying to get mysql installed on my personal computer and I've run into a few issues.
I can not create a user during install, If I try to add a user during install it fails on the create users step. So I figure I will just add the users after install via sql workbench, which brings me to number 2.
After installing mysql server, attempting to connect to the server with mysql workbench just asks me for the password endlessly until it locks me out. I know the password I'm using is correct because when I modify the mysql server instance via the installer it asks for the current root password, adn the password works there.
After install, if I stop the mysql service from running mysql workbench loads without issue.
Mysql installer can not stop the mysql service, to modify an install I have to manually stop the service.
The common thread to all of these issues is the windows service for mysql.
Troubleshooting steps
verified port 3306 was open in the firewall
disable firewall entirely
Turned off anti-virus
uninstalled anti-virus
Multiple restarts of both the service and computer
Uninstalled all my sql components and reinstalled (multiple times)
changed the root password via command shell (via This MySQL guide for recovering the root password)
Downloaded the installer again in case there was a corruption of my original file.
So I'm pretty stumped, I've been at this for two days and I don't feel any closer to a solution.
Configuration info:
windows 10 (intel core i-5, 16 gigs of ram, 96 gigs of open space on SSD)
MYSql Installer version 8.0.13.0
The first thing I would check is the logs.
However, given the info you provided it sounds like default settings are there but no root#localhost user password or root#127.0.0.1.
Check the my.ini existence for details and logs.
You may have to follow this to create the config file if it doesn’t exist - follow the link below.
https://dba.stackexchange.com/questions/21835/mysql-workbench-asking-for-password
Error log location in windows:
The error log is located in the data directory specified in your my.ini file. The default data directory location is C:\Program Files\MySQL\MySQL Server......
I need to create and manage connections to database servers using mysql Workbench and Mysql server. I have installed mysql-installer-community-5.6.35.0. But when I open MYSQL command line client, it automatically closes. I have already checked the status in services, it shows running. Any Suggestions as to how can I resolve this issue?
It's a known, but weirdly, seemingly unresolved issue when it comes to MySQL. However, it's a bug with your Windows users' privileges most likely. The workaround is to open the Command prompt (cmd), cd into the MySQL installation folder and execute mysql.exe from there.
enter image description hereI'm try to install hmailserver in combination with wamp/mysql.
I get an errormessage, hmailserver recommends to copy a file manually.
copypaste:
Error:
The MySQL client (libmysql.dll, 32 bit) could not be loaded.
hMailServer needs this file to be able to connect to MySQL.
The MySQL client needs to be manually copied to the hMailServer Bin directory. The file is not included in the hMailServer installation.
Path: H:\Program Files (x86)\hMailServer\Bin\libmysql.dll.
I don't see MySql in the service (Step 5 in the "HmailServer Database Step up -Step 5 of 7). And wampapache doesn't work either.
Thank you for the help.
enter image description here
I figured it out. I go into "C:\wamp\bin\mysql\mysql5.7.14\lib" right click "libmysql.dll" next press copy. I go to "C:\Program Files (x86)\hMailServer\Bin" and paste the copied file into it
The MYSQL Server service is called wampmysqld or if you have the 64bit WAMPServer wampmysqld64
However I would suggest that you take the other option and use the SQLServer database with hmailserver.
If you use MySQL which I admit seems like the most obvious option, then every time you ADDON another MySQLServer version to WAMPServer you will have to migrate the hmailserver database over to the new MySQL, and like me forget to do so.
If you use the built in SQLServer database with hmailserver, you can basically forget about hmailserver whenever you change something in WAMPServer's MySQLServer versions.
Regarding hMailServer and MySQL 8.x
It doesn't matter if you run a 32-Bit or 64-Bit MySQL Server on the same Windows
Machine or on a Remote server (regardless which OS) as long as you have the required libmysql.dll file in hMailServer /bin folder or a at your PATH Environment variable.
Regarding MySQL 8.x:
MySQL 8.x enables per default its new API API which is incompatible with
all hMailServer versions. You need to configure MySQL 8.x in mixed mode which allows
5.7.x MySQL Clients to connect to make it work with hMailServer. You also can use
a MySQL 5.7.x Release without any configuration to make it work out of the box.
For more info see: https://www.hmailserver.com/forum/viewtopic.php?f=10&t=33819
I've been trying to use my mysql noinstall zip archive and the steps that I found in some of the websites are not descriptive. Can someone help?
If you follow the instruction here you will be alright. From that page:
Users who are installing from the noinstall package can use the instructions in this section to manually install MySQL. The process for installing MySQL from a Zip archive is as follows:
Extract the archive to the desired install directory
Create an option file
Choose a MySQL server type
Start the MySQL server
Secure the default user accounts
To start the sever run
mysqld --console
and after that run
mysql -u root
to start doing whatever you want.
Notice that MySql will function exactly the same as if you would have installed or configured it to run as a service. Your schema's are stored on disk. If you start it after you've stopped it your previous data will still be there. So it doesn't turn magically into an in-memory database.
If you want to install the MySQL database as a service you can use the command below.
mysqld.exe --install