Are table headers only for the top row in html? - html

I always see the th tag only used in the first row of the table. Is there some specific reason why it can't be used to create 'left' headers along the leftmost column. Is this bad form, or is this ok.
Basically, a table with headings on the top row and the leftmost column, with the very top left square being empty.
e.g.
<table>
<tr>
<th><!--empty--></th>
<th>Top 1</th>
<th>Top 2</th></tr>
<tr>
<th>LeftHeader?</th>
<td>data1</td>
<td>data2</td></tr>
</table>

That's valid, however, when using a <thead> it has to be the first row. This is valid:
<table>
<thead>
<tr>
<td>0,0</td><td>1,0</td><td>2,0</td>
</tr>
</thead>
<tr>
<th>0,1</th><th>1,1</th><th>2,1</th>
</tr>
</table>
But this is not:
<table>
<tr>
<td>0,0</td><td>1,0</td><td>2,0</td>
</tr>
<thead>
<tr>
<th>0,1</th><th>1,1</th><th>2,1</th>
</tr>
</thead>
</table>
It's invalid HTML and you can double check that with the w3C markup validation service though before you do you'll have to add a <!DOCTYPE> declaration and the rest of a valid HTML doc.

Related

Adding multiple elements in a table column

I am trying to add multiple table cells elements under each of my heading cells but it isn't working.
Here is a screen for better understanding :
I would like to have for each of my category, say for example,
Category 1 : to have below "Brandon" others names like => Steph, Emily, John, etc.
So far I made with a line break but it doesn't work as expected: each item should be in a separated row.
<table>
<tr>
<th>Category 1</th>
<th>Category 2</th>
</tr>
<tr>
<td>Emil<br>Brandon</td>
<td>Tobias</td>
</tr>
</table>
Simply add another row.
<table>
<tr>
<th>Category 1</th>
<th>Category 2</th>
</tr>
<tr>
<td>Emil</td>
<td>Tobias</td>
</tr>
<tr>
<td>Brandon</td>
<td></td>
</tr>
</table>

Accessible Table with Sub Headings / Category Separation

EDIT: To the person who tagged this as having nothing to do with ADA. This question has everything to do with ADA. I have tons of websites with tables formatted like that which I am trying to figure out how to make them understandable to someone using a screen reader.
Hello I am trying to figure out a way to make a table which has subheadings / separator rows to announce the proper headings when being read by a screen reader.
The first table works as I would like, announcing the rowgroup's TH and then the column heading. However the second table doesn't announce as I was hoping. For example, Jill announces "Field Techs, Name, Jill" Instead of "Office, Name, Jill" as I had expected.
I've tried scope="col" and scope="colgroup" but neither helped. Is this even possible? or just a badly structured table?
Thank you for reading and any help/advice you may offer!
table thead, table th { background:#d3d3d3; }
table { margin-bottom:40px; }
<!-- This table's headings seem to work properly -->
<table width="100%" cellspacing="0" cellpadding="4" >
<thead>
<tr>
<td> </td>
<th id="name_col" scope="col" width="50%">Name</th>
<th id="position_col" scope="col" width="50%">Position</th>
</tr>
</thead>
<tbody>
<tr>
<th id="office_row" scope="rowgroup" rowspan="2">Office</th>
<td headers="office_row name_col">Jill</td>
<td headers="office_row position_col">Office Manager</td>
</tr>
<tr>
<td headers="office_row name_col">Robert</td>
<td headers="office_row position_col">Project Manager</td>
</tr>
<tr>
<th id="field_row" scope="rowgroup" rowspan="2">Field Techs</th>
<td headers="field_row name_col">Jason</td>
<td headers="field_row position_col">Tech</td>
</tr>
<tr>
<td headers="field_row name_col">Mike</td>
<td headers="field_row position_col">Tech</td>
</tr>
</tbody>
</table>
<!-- This table's headings don't announce correctly. Jill announces "Field Techs, Name, Jill"-->
<table width="100%" cellspacing="0" cellpadding="4" >
<thead>
<tr>
<th id="name_col" scope="col" width="50%">Name</th>
<th id="position_col" scope="col" width="50%">Position</th>
</tr>
<tr>
<th id="office_group" colspan="2">Office</th>
</tr>
</thead>
<tbody>
<tr>
<td headers="office_group name_col">Jill</td>
<td headers="office_group position_col">Office Manager</td>
</tr>
<tr>
<td headers="office_group name_col">Robert</td>
<td headers="office_group position_col">Project Manager</td>
</tr>
</tbody>
<thead>
<tr>
<th id="field_group" colspan="2">Field Techs</th>
</tr>
</thead>
<tbody>
<tr>
<td headers="field_group name_col">Jason</td>
<td headers="field_group position_col">Tech</td>
</tr>
<tr>
<td headers="field_group name_col">Mike</td>
<td headers="field_group position_col">Tech</td>
</tr>
</tbody>
</table>
table can only have zero or one thead element (see documentation).
Permitted contents : An optional caption element, followed by zero or more colgroup elements, followed by an optional thead element
By having multiple thead elements only the last one is considered by your browser and your screenreader. You can use ARIA attributes and roles to handle multiple separated heading lines (using for instance aria-labelledby attribute to specify the heading).
One example from WCAG:
ARIA9: Using aria-labelledby to concatenate a label from several text nodes
You are using both the scope method and header/id's method in one table, which will create problems. Also, as others have pointed out, you're using multiple <th> and <tbody> elements, which isn't good either.
I've prepared some code samples here on how to correctly code this table using both the scope method and header/id's method:
https://jsfiddle.net/oody1b8x/
It's worth noting that <th> and <tbody> are not accessibility-related elements, even though they appear to be. These are essentially only used when printing. It lets the printer know that the header rows can be repeated on the next page if the table requires pagination.
Also -- don't use ARIA for this purpose; it will only create more problems. The native HTML semantics are perfectly capable of communicating how this data is structured.

Table row span cell span

This is an assignment I need help with. I hate tables as is, but this is what it says:
"The first row in each table consists of one table cell which spans two columns that contain the real estate listing name. The second row in each table consists of two table cells."
My code:
<table>
<tr>
<th>
<h3>TEST</h3>
</th>
</tr>
<th rowspan="2"></th>
<td>Something here !</td>
</tr>
</table>
Just wanted to verify if I did this correctly? Here's the full code:
http://jsfiddle.net/4jzUc/
also, it's supposed to look like this: http://screencloud.net/v/aA5Y
You want to span the column, not the row (colspan vs rowspan). I think this is what you are looking for.
<table>
<tr>
<th colspan="2">
Title
</th>
</tr>
<tr>
<td>First cell</td>
</tr>
<tr>
<td>Second cell</td>
</tr>
</table>
No, your markup is not correct. It does not even comply with the HTML table model, as you can see by using http://validator.nu on your document with <!doctype html> slapped at the start. Still less it does do what the assignment calls for.
The assignment as such is very simple: you just a table with two rows and two columns, just so that the first row has only one cell, which spans two columns:
<table>
<tr><td colspan=2>Real estate name
<tr><td>A table cell <td>Another table cell
</table>
You could use th instead of the first td, since it is kind of a header cell, but beware then that this makes its content bold and centered by default (you can override this is in CSS).
As per the “supposed to look like” link, it seems that you are supposed to put an img element only in the first cell of the second row, and the second cell there contains text and a ul element. And a little bit of CSS too. Note that for this output, you will need to align the second row vertically to the top (using the HTML valign attribute or the CSS vertical-align property).
correct code:
<table>
<tr>
<th>
<h3>TEST</h3>
</th>
<th rowspan="2">RowSpan2!</th>
</tr>
<tr>
<td>Something here !</td>
</tr>
<tr>
<td>Something Else !</td>
</tr>
</table>

How can I make a HTML table with headers in one vertical column?

I want to make a HTML file that has the headers in one vertical column, and the data in the column to the right. There will only be 2 columns in total. I've looked at the html docs and seen stuff about scope, but I'm not entirely sure how to use it in this context. Example:
The HTML is pretty straightforward, just be sure to use the [scope] attribute to specify the correct orientation of the table.
<table>
<tbody>
<tr>
<th scope="row">City</th>
<td>$city</td>
</tr>
<tr>
<th scope="row">Latitude</th>
<td>$latitude</td>
</tr>
<tr>
<th scope="row">Longitude</th>
<td>$longitude</td>
</tr>
<tr>
<th scope="row">Country</th>
<td>$country</td>
</tr>
</tbody>
</table>
From the docs for the [scope] attribute:
The row state means the header cell applies to some of the subsequent cells in the same row(s).
You can create the tables with elements proceeded by elements like so:
<table>
<tr>
<th scope="row">Category 1</th><td>data1</td>
</tr>
<tr>
<th scope="row">Category 2</th><td>data2</td>
</tr>
<tr>
<th scope="row">Category 3</th><td>data3</td>
</tr>
Here is an example of it in action:
vertical headers

HTML Tables - can I have an additional tbody before the thead?

I need add to some elements on top of a table in line with the columns of the said table.
This table contains a <thead> (which is required due to jquery.tablesorter plugin). I assumed that if I put another <tbody> on top of the <thead> I would be able to keep these elements in line with the rest of the columns, but both chrome and firefox render every <tbody> below the <thead>.
Example:
<table>
<tbody>
<tr>
<td>1</td><td>1</td><td>1</td>
</tr>
</tbody>
<thead>
<tr>
<th>head</th><th>head</th><th>head</th>
</tr>
</thead>
<tbody>
<tr>
<td>2</td><td>2</td><td>2</td>
</tr>
<tr>
<td>3</td><td>3</td><td>3</td>
</tr>
<tr>
<td>4</td><td>4</td><td>4</td>
</tr>
</tbody>
</table>
Although I understand this, I still need to find a way to have these elements stay in line with specific columns.
You can use multiple rows in <thead> like this:-
<table>
<thead>
<tr> <td>1</td> <td>1</td> </tr>
<tr> <td>head</td> <td>head</td> </tr>
</thead>
</table>
I recommend that you use an id (#) marker to identify that part that you want the js to work off and have the js use that id.
With that, have the thead first and the tbody last.
The variations you are describing may work - in the browser you using now, on the OS you are ok - and may be compliant a certain version of the HTML spec- but putting things in an unusual order is (in my expereince) just the kind of thing to not work, or work the same, everywhere and to eventually be the cause of much frustration, especially as the site grows in complexity.
One solution is to use another table inside one tr, in your thead. Althought, this is a totally ugly solution.
You can also place a div above your table using CSS.
Correct table structure is:
<table>
<thead>
<tr>
<th></th>
<th></th>
</tr>
</thead>
<tbody>
<tr>
<td></td>
<td></td>
</tr>
</tbody>
<tfoot>
<tr>
<th></th>
<th></th>
</tr>
</tfoot>
</table>
<thead> will always be on the top and <tfoot> will always be at the bottom.
Using jQuery you can swap <thead> and <tbody> content by:
$(document).ready(function() {
$('#myTrigger').click(function() {
var top = $('thead').html();
var mid = $('tbody').html();
$('thead').html(mid);
$('tbody').html(top);
});
});