Intellisense works... On some of the servers. It's the same Server Management Studio (SQL Server 2008) I'm using to manage the servers but Intellisense doesn't work on one of the newer servers (not sure if other servers have the same issue, as of now I've only encountered this problem on one of the servers).
I checked all the settings etc, but as I said - it does work on some of the servers in SQL 2008 Server Management Studio so it seems like it's limited to this one specific server.
(I wasn't sure if this belonged here. If this post is in the wrong place please move it)
This question covers making sure it's enabled, which it sounds like it is (I'm linking it just in case). There also seems to be an installation issue with 2008 and Visual Studio 2010 (also mentioned in that link) sometimes, and this question covers that. We had the same issue on one of 2008 servers, and post an update, it finally worked (solution 2).
Apart from some very common reasons (which don't apply here, as you say it's not working only for some servers) listed here:
http://msdn.microsoft.com/en-us/library/ks1ka3t6%28v=vs.90%29.aspx
... did you happen to instal VS2010 lately? There's a bug that makes IntelliSense stop workingŁ
http://support.microsoft.com/kb/2531482
Also try to refresh IntelliSense cache after you connect to new server (SSMS): Edit>IntelliSense>RefreshLocalCache
I have difficulties connecting to my MS SQL Server and I can't find tutorial or answer how to do this, even though I think this should be something pretty standard.
My current setup is this - I have freshly new Installed Visual Studio 2010 and followed Beth Massi's article Step-by-Step: Installing SQL Server Management Studio 2008 Express after Visual Studio 2010 : http://blogs.msdn.com/b/bethmassi/archive/2011/02/18/step-by-step-installing-sql-server-management-studio-2008-express-after-visual-studio-2010.aspx
But I'm not able to connect to a SQL Server. In my Configuration Tools\SQL Server Configuration Manager I see this when I open it :
I set to Enable all TCP\IP and Named Pipes (Just saw that this may be a problem) and in the properties of the SQL Server (SQLEXPRESS) from Services I see this:
I also see in the Log On tab this :
some sort of password (not entered by me) it seems to be something default, but since I'm not sure where the problem is I try to show everything I think may have something to do with solving my problem.
At the end I tried different options to connect to my SQL Server form the Management Studio I ended up with this:
As you see I get an error (included in order to be able to read it). I read the the machine name may be required so my User Account name is Xman and my machine's name is Xman-PC. Eveh though my printscreen image is not from this try I made an attempt to connect to the Server with XMAN-PC\SQLEXPRESS but again - no success.\
Could you point me to a good tutorial on how to connect to a MS SQL Server (I can't believe there's nothing that explains in simple steps what you need to do to connect to a server) or could you tell me how to set-up my configurations so I actually can start to work with databases?
P.S
Forgot to mention in Command Prompyt - sqlcmd command also returns error - Could not open SQL connection.
P.S
Finally I managed to connect using Windows Authentication and (local)\sqlexpress for ServerName. Which at least means that everything is working. But now even more I would like to know how to connect using SQL Server Authentication. It must be something default as it was for Windows Authentication?!
Looks like you've done the hard work - last step will be turning on SQL Server Authentication.
Since you installed with the default values, only Windows Authentication is allowed; you need to set it to SQL Server and Windows Authentication mode. You can do this through Management Studio through the instance Properties -> Security.
See this link for full details: Change Server Authentication Mode.
We currently use a VS 2010 (upgraded from 2008) setup project to install our application, and utilize the SQL Server 2008 install prerequisite.
Well wouldn't you know, management has got it in their head that everything (including prerequisites, but not .net) that's installed by the application must now be uninstalled by the uninstaller.
So I'm trying to modify the installer to uninstall SQL Server Express 2008.
I first thought that I could modify the package.xml dependency for sql server to trigger the right install conditions so I could pass in the uninstall arguments, but I'm at a loss as to what those conditions would be.
Then I thought about using a custom install action and System.Diagnostics.Process to programmatically invoke the sql express installer with uninstall command flags, but I'm not sure if I can guarantee that the installer will make that executable accessible for uninstallation.
Any ideas?
Um, uninstalling sql server express is bad. What if another application was later added that relies on this? Your uninstaller would break that application.
Management is right, though: you should uninstall everything you installed in the first place.
So what is the solution then? As they say, "damned if you do, damned if you don't".
Fortunately, if this is for a desktop application the answer is simple: don't use Sql Server Express Edition. Express Edition is really a server class engine. Sql Server Compact Edition is much more suited to this scenario, and will solve your deployment issues.
If this is for a server application, it's a little trickier. Any well-behaving installer will create it's own instance of Sql Server Express. You then need to make sure you uninstall only your instance (and also make sure your install is well-behaving). This doesn't really solve the problem, but at least it lets you say it's their bug and not your if something breaks after your uninstaller runs. Unfortunately, you still have to build this part manually.
I'm being driven to insanity trying to figure out why Intellisense just fails to work at all. The server I'm using is local and is 2008, the database is set to 2008 compatibility, Intellisense is on in every menu I can find, and yet no member list will pop up even with a CTRL-J.
Has anyone experienced something like this and found a way to fix it? I really can't bring myself to start work unless I have Intellisense working.
I understand this post is old but if anybody is still searching and has not found a solution to the intellisense issue even after re-installing, applying the cumulative updates, or other methods, then I hope I may be of assistance.
I have Applied SQL 2008 R2 Service Pack 1 which you can download here
http://www.microsoft.com/download/en/details.aspx?id=26727
32 Bit:
SQLServer2008R2SP1-KB2528583-x86-ENU.exe
64 Bit:
SQLServer2008R2SP1-KB2528583-x64-ENU.exe
I have applied this SP1 and now my intellisense works again.
Visual Studio 2010 SP1 breaks SSMS 2008 R2's IntelliSense. There is a connect about that, and fortunately there is also a fix for that.
(In short, you will need to install Cumulative Update package 7 for SQL Server 2008 R2 by requesting
SQLServer2008R2_RTM_CU7_2507770_10_50_1777_x86or
SQLServer2008R2_RTM_CU7_2507770_10_50_1777_x64
from this hotfix request page.)
EDIT: As #Paul Lemke noted, one might need to get the latest CU package. This blog contains the SQL server releases. (As of this writing, the latest is CU14)
For SQL Server 2008 R2, installing Cumulative Update 7 will fix the problem. The file you need is
SQLServer2008R2_RTM_CU7_2507770_10_50_1777_x86
or
SQLServer2008R2_RTM_CU7_2507770_10_50_1777_x64
I also had to uninstall and re-install SQL Server 2008 first (which didn't fix it, but the CU did).
No need to reinstall.
Click on the setup file. Then go to maintenance and click on Repair. This should correct the intellisense problem.
I just the had same problem. I figured out that Intellisense stopped working after I took some databases offline and doing an Intellisense refresh (Ctrl-Shift-R). I brought the offline databases back online, did a refresh (Ctl-Shft-R) again and VOILA! Intellisense is working again.
What a crappy design. Maybe the population of Intellisense's lists chokes when a database exists but is offline. Thanks Microsoft.
I don't want to suggest a product out of turn, since getting Intellisense running is probably the best option, but I've struggled with the accursed no intellisense on Management Studio for months. Reinstallation, CU7 update, refreshing caches, sacrificing chickens to pagan gods; nothing has helped.
I was about to pay for RedGate's SqlPrompt (pretty damned pricey, $195 US), when I found SqlComplete.
http://www.devart.com/dbforge/sql/sqlcomplete/?gclid=CN2xs_Lw7akCFcYZHAodpicXXw
There is a free version which does the basics, and the full version is only $50!
I'm a database architect, and while I can remember the commands, auto complete saves me heaps of time. If you're stuck and can't get Intellisense to work, try SqlComplete. It saved me hours of hassle.
I recently wrote a tip about troubleshooting IntelliSense. The title says SQL Server 2012 but most of the techniques can be applied to earlier versions of Management Studio as well.
Troubleshooting IntelliSense in SQL Server Management Studio
I ended up fixing it by reinstalling SQL Server 2008. This wasn't at all optimal, but if someone comes across a similar problem be sure to know this route will probably work.
I tried all the fixes - taking databases offline and then bringing them online, installed Cumulative update 10, repaired SQL Server Installation, refreshed local cache, made changes to the required settings on SQL Server Management Studio but everything was in vain. Finally installing the correct service pack (SP1) did the trick for me !
Follow the link below, and download SQLServer2008R2SP1-KB2528583-x86-ENU.exe (or the x64 file for a x64 bit instance of SQL Server)
http://www.microsoft.com/download/en/details.aspx?id=26727
Finally i have Intellisense enabled !
I'm posting this here as I am sure more people will be comeing across this issue. I installed Security Update for microsoft Visual Studio 2010 Service Pack 1 (KB2565057) and lost Intellisense in SQL Server Management studio 2008 (not R2).
An uninstall of the SP restored Intellisense .. Don't you just love Microsoft????
After finding this thread, I discovered that my Intellisense only broke after taking a database offline, and any offline database(s) on the instance would kill Intellisense.
In this thread, explaining that in order to restore Intellisense, you must
take the necessary databases offline, then
restart the server instance, and finally
refresh the Intellisense cache.
This procedure has worked for me and Intellisense is now working again.
I've had the same problem too. Searched everywhere online and can't find a solution. I did install Redgate's SQL Prompt which functions similarly to Intellisense, so maybe there was a conflict. I've since stopped the Prompt from running, but now no intellisense at all. Using SQL Server 2008 will SQLCMD mode off, no luck at all. This has happened before, a reinstall of SQL Server was the only thing that I could get to work.
Same problem, but just re-installing SQL Management Studio 2008 R2 Service Pack 1 worked for me. I left my DB engine alone. The DB engine is not the problem, just SQL Management Studio getting hosed by Visual Studio SP1.
Installers here...
http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=26727
I installed SQLManagementStudio_x86_ENU.exe (32 bit for my machine).
When trying the accepted answer, I was getting an installation error: A failure was detected for a previous installation, patch, or repair blah, blah, blah...
To fix this, in my registry, I changed all DWORD values to 1 in the following Keys: (As always be careful modifying the registry and create a backup of the key before changing anything)
HKLM\SOFTWARE\Microsoft\Microsoft SQL Server\100\ConfigurationState
HKLM\SOFTWARE\Microsoft\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\ConfigurationState
HKLM\SOFTWARE\Microsoft\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\ConfigurationState
HKLM\SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL10.SQLEXPRESS\ConfigurationState
HKLM\SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\ConfigurationState
See my full post about Fixing Intellisense issue in SSMS.
Here is the official word on this from MS.
http://support.microsoft.com/kb/2531482
Their solution is the same as above, install the SQL Server 2008 R2 updates with the version 10.50.1777.0.
http://support.microsoft.com/kb/2507770
I did all of the above and ultimately gave up. Then one last resort was a third part SQL Intellisense add-on I found SQL Complete Express by devArt.
It's Intellisense plus more. Intellisense is back and all is well.
Supports SSMS 2005 - 2012 also includes Visual Studio Add-In.
SQL Complete
For SQL Server 2008 R2, installing Cumulative Update 7 will fix the problem. The file you need is
SQLServer2008R2_RTM_CU7_2507770_10_50_1777_x86
or
SQLServer2008R2_RTM_CU7_2507770_10_50_1777_x64
I also had to uninstall and re-install SQL Server 2008 first (which didn't fix it, but the CU did).
this is Direct Link From MS that i was got it Hot Fix
I am trying to upgrade an named instance of MSDE to SQL Server 2008 Express. When I get to the "Select Features" page of the 2008 installer there are no instances listed. The upgrade to SQL Server 2005 Express (on the same VM image) however works fine.
It seems to be a supported scenario (http://msdn.microsoft.com/en-us/library/ms143393.aspx), yet I am finding that it does not work. Has anyone successfully done this?
It looks to be supported: http://msdn.microsoft.com/en-us/library/ms143393.aspx
There are also comments you might find useful.
I just had the same problem, so I'll post my solution for anyone that happens upon this thread;
You are probably seeing your named instance on that screen but it is greyed out.
Check that you have SP4 for MSDE, which is version 8.0.2039.