Things I've tried after searching:
in Web.Config put a binding on the old version:
<dependentAssembly>
<assemblyIdentity name="Newtonsoft.Json" publicKeyToken="30ad4fe6b2a6aeed" culture="neutral" />
<bindingRedirect oldVersion="0.0.0.0-6.0.0.0" newVersion="6.0.1.0" />
</dependentAssembly>
Edit my .csproj file to make sure there is only one Newtonsoft reference
<Reference Include="Newtonsoft.Json, Version=6.0.0.0, Culture=neutral, PublicKeyToken=30ad4fe6b2a6aeed, processorArchitecture=MSIL">
<HintPath>..\packages\Newtonsoft.Json.6.0.1\lib\net45\Newtonsoft.Json.dll</HintPath>
<SpecificVersion>False</SpecificVersion>
<Private>True</Private>
</Reference>
Search my computer for every Newtonsoft.Json.dll and delete every non 6.0.1 version and delete the contents of my temp folder
Repair/Reinstall the package in nuget manager console
It succeeds on building, but gets the error when going to the site.
EDIT
ok, so then I tried to reinstall like every nuget package, and it seems to have added back the 4.5 version of the newtonsoft.json.dll, but I'm getting the same error. My project's Target freamework is .NET 4.5.1 and here is the stack trace I'm getting now:
Server Error in '/' Application.
Could not load file or assembly Newtonsoft.Json or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.IO.FileLoadException: Could not load file or assembly Newtonsoft.Json or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Assembly Load Trace: The following information can be helpful to determine why the assembly Newtonsoft.Json could not be loaded.
=== Pre-bind state information ===
LOG: DisplayName = Newtonsoft.Json
(Partial)
WRN: Partial binding information was supplied for an assembly:
WRN: Assembly Name: Newtonsoft.Json | Domain ID: 2
WRN: A partial bind occurs when only part of the assembly display name is provided.
WRN: This might result in the binder loading an incorrect assembly.
WRN: It is recommended to provide a fully specified textual identity for the assembly,
WRN: that consists of the simple name, version, culture, and public key token.
WRN: See whitepaper http://go.microsoft.com/fwlink/?LinkId=109270 for more information and common solutions to this issue.
LOG: Appbase = file:///c:/users/user/documents/visual studio 2013/Projects/foo/bar/
LOG: Initial PrivatePath = c:\users\user\documents\visual studio 2013\Projects\foo\bar\bin
Calling assembly : (Unknown).
===
LOG: This bind starts in default load context.
LOG: Using application configuration file: c:\users\user\documents\visual studio 2013\Projects\foo\bar\web.config
LOG: Using host configuration file: C:\Users\user\Documents\IISExpress\config\aspnet.config
LOG: Using machine configuration file from C:\Windows\Microsoft.NET\Framework\v4.0.30319\config\machine.config.
LOG: Policy not being applied to reference at this time (private, custom, partial, or location-based assembly bind).
LOG: Attempting download of new URL file:///C:/Users/user/AppData/Local/Temp/1/Temporary ASP.NET Files/root/48686d37/9d7a6572/Newtonsoft.Json.DLL.
LOG: Attempting download of new URL file:///C:/Users/user/AppData/Local/Temp/1/Temporary ASP.NET Files/root/48686d37/9d7a6572/Newtonsoft.Json/Newtonsoft.Json.DLL.
LOG: Attempting download of new URL file:///c:/users/user/documents/visual studio 2013/Projects/foo/bar/bin/Newtonsoft.Json.DLL.
LOG: Using application configuration file: c:\users\user\documents\visual studio 2013\Projects\foo\bar\web.config
LOG: Using host configuration file: C:\Users\user\Documents\IISExpress\config\aspnet.config
LOG: Using machine configuration file from C:\Windows\Microsoft.NET\Framework\v4.0.30319\config\machine.config.
LOG: Redirect found in application configuration file: 4.5.0.0 redirected to 6.0.1.0.
LOG: Post-policy reference: Newtonsoft.Json, Version=6.0.1.0, Culture=neutral, PublicKeyToken=30ad4fe6b2a6aeed
LOG: Attempting download of new URL file:///C:/Users/user/AppData/Local/Temp/1/Temporary ASP.NET Files/root/48686d37/9d7a6572/Newtonsoft.Json.DLL.
LOG: Attempting download of new URL file:///C:/Users/user/AppData/Local/Temp/1/Temporary ASP.NET Files/root/48686d37/9d7a6572/Newtonsoft.Json/Newtonsoft.Json.DLL.
LOG: Attempting download of new URL file:///c:/users/user/documents/visual studio 2013/Projects/foo/bar/bin/Newtonsoft.Json.DLL.
WRN: Comparing the assembly name resulted in the mismatch: Major Version
ERR: Failed to complete setup of assembly (hr = 0x80131040). Probing terminated.
Stack Trace:
[FileLoadException: Could not load file or assembly 'Newtonsoft.Json' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)]
[FileLoadException: Could not load file or assembly 'Newtonsoft.Json, Version=6.0.1.0, Culture=neutral, PublicKeyToken=30ad4fe6b2a6aeed' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)]
System.Reflection.RuntimeAssembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks) +0
System.Reflection.RuntimeAssembly.nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks) +34
System.Reflection.RuntimeAssembly.InternalLoadAssemblyName(AssemblyName assemblyRef, Evidence assemblySecurity, RuntimeAssembly reqAssembly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks) +152
System.Reflection.RuntimeAssembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean forIntrospection) +77
System.Reflection.RuntimeAssembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) +16
System.Reflection.Assembly.Load(String assemblyString) +28
System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +38
[ConfigurationErrorsException: Could not load file or assembly 'Newtonsoft.Json, Version=6.0.1.0, Culture=neutral, PublicKeyToken=30ad4fe6b2a6aeed' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)]
System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +752
System.Web.Configuration.CompilationSection.LoadAllAssembliesFromAppDomainBinDirectory() +218
System.Web.Configuration.CompilationSection.LoadAssembly(AssemblyInfo ai) +130
System.Web.Compilation.BuildManager.GetReferencedAssemblies(CompilationSection compConfig) +170
System.Web.Compilation.BuildManager.GetPreStartInitMethodsFromReferencedAssemblies() +91
System.Web.Compilation.BuildManager.CallPreStartInitMethods(String preStartInitListPath, Boolean& isRefAssemblyLoaded) +285
System.Web.Compilation.BuildManager.ExecutePreAppStart() +153
System.Web.Hosting.HostingEnvironment.Initialize(ApplicationManager appManager, IApplicationHost appHost, IConfigMapPathFactory configMapPathFactory, HostingEnvironmentParameters hostingParameters, PolicyLevel policyLevel, Exception appDomainCreationException) +516
[HttpException (0x80004005): Could not load file or assembly 'Newtonsoft.Json, Version=6.0.1.0, Culture=neutral, PublicKeyToken=30ad4fe6b2a6aeed' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)]
System.Web.HttpRuntime.FirstRequestInit(HttpContext context) +9913572
System.Web.HttpRuntime.EnsureFirstRequestInit(HttpContext context) +101
System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context) +254
Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.0.30319.18408
To solve this, I ensured all my projects used the same version by running the following command and checking the results:
update-package Newtonsoft.Json -reinstall
And, lastly I removed the following from my web.config:
<dependentAssembly>
<assemblyIdentity name="Newtonsoft.Json" publicKeyToken="30ad4fe6b2a6aeed" culture="neutral" />
<bindingRedirect oldVersion="0.0.0.0-6.0.0.0" newVersion="6.0.0.0" />
</dependentAssembly>
If you want to ensure all your Newtonsoft.Json packages are the same version, you can specify the version like so:
update-package Newtonsoft.Json -version 6.0.0 -reinstall
Note: To open the PMC in Visual Studio, click Tools -> Nuget Package Manager -> Package Manager Console. Thanks #Rose!
I am using Newtonsoft.Json v6.0.3, but this is what I had to do in my Web.config file:
<dependentAssembly>
<assemblyIdentity name="Newtonsoft.Json" publicKeyToken="30ad4fe6b2a6aeed" culture="neutral" />
<bindingRedirect oldVersion="0.0.0.0-4.5.0.0" newVersion="6.0.0.0" />
</dependentAssembly>
Note that even though I am using 6.0.3, I had to put in newVersion="6.0.0.0"
In my packages.config file I have:
<package id="Newtonsoft.Json" version="6.0.3" targetFramework="net45" />
I tried the following after having already ensured that my computer had the same version in all locations and that my projects were all pointing to the same reference path. I had also made sure that the binding of the old version was their and bound to the current version of dll that I had.
I work in an environment with a strict framework and the framework team often upset the versioning with the different dll's.
How I fixed this issue was to run the package manager console within visual studio (2013). From there I ran the following command:
update-package Newtonsoft.Json -reinstall
followed by
update-package Newtonsoft.Json
This went through and updated all of my config files and relevant project files. Forcing them all to the same version of the dll. Which was initially version 4.5 before updating again to get the latest.
I had the same error message and, like you mentioned, it was due to different versions of the Newtonsoft.Json.dll being referenced.
Some projects in my MVC solution used the NuGet package for version 4 of that dll.
I then added a NuGet package (for Salesforce in my case) that brought Newtonsoft.Json version 6 with it as a dependency to one of the projects. That was what triggered the problem for me.
To clean things up, I used the Updates section in the NuGet Package Manager for the solution (off Tools menu or solution right-click) to update the Json.Net package throughout the solution so it was the same version for all projects.
After that I just checked the App Config files to ensure any binding redirect lines were going to my chosen version as below.
<bindingRedirect oldVersion="0.0.0.0-6.0.0.0" newVersion="6.0.0.0" />
Ok, I think I got it to work now. I deleted every Newtonsoft.Json.dll on my machine that wasn't the latest version that I could find, made sure I had the latest version in NuGet, and build it and made sure that was the latest one in the bin folder, and I left the changes in the web.config and the .csproj. Now I'm on to another error, so it must be working..
After hours struggling with this... I did the following:
web.config
<runtime>
<assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
<dependentAssembly>
<assemblyIdentity name="Newtonsoft.Json" publicKeyToken="30ad4fe6b2a6aeed" culture="neutral" />
<bindingRedirect oldVersion="0.0.0.0-12.0.0.0" newVersion="12.0.0.0" />
</dependentAssembly>
<!-- other assemblies... -->
</assemblyBinding>
</runtime>
The key to enter the correct newVersion and oldVersion number is open the project's References find the package go to its properties or click alt + enter
You'll find a section Version which in my case was 12.0.0.0 while its actually 12.0.3 when exploring with Manage NuGet.
So you need to pick the package's version from the reference properties (in my case 12.0.0.0)
Finally, clean and rebuild the project (you might want to delete the bin and obj folders before).
You might face other packages dependencies issues, i did that for all and they worked.
By commenting it out this part on my web.config solved my problem:
<dependentAssembly>
<assemblyIdentity name="Newtonsoft.Json" publicKeyToken="30ad4fe6b2a6aeed" culture="neutral" />
<bindingRedirect oldVersion="0.0.0.0-6.0.0.0" newVersion="6.0.0.0" />
</dependentAssembly>
But of course you need to make sure you have updated or you have the right version by doing this in your package manager console:
update-package Newtonsoft.Json -reinstall
You can solve the issue by adding below lines in web.config file.
<runtime>
<assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
<dependentAssembly>
<assemblyIdentity name="Newtonsoft.Json" publicKeyToken="30ad4fe6b2a6aeed" culture="neutral"/>
<bindingRedirect oldVersion="0.0.0.0-8.0.0.0" newVersion="8.0.0.0"/>
</dependentAssembly>
</assemblyBinding>
</runtime>
In my case it was just a matter of:
Tools -> NuGet Package Manager -> Package Manager Settings -> Clear Cache
The problem was caused when I remapped a TFS folder.
I have tried the steps by Oleg, and they worked for my same situation.
Steps:
Run update-package Newtonsoft.Json -reinstall in Package Manager.
Delete your bin by enabling viewing the hidden files and deleting the bin folder.
Close your Visual Studio and re-open it.
Now run your project again. I believe it should be ok!
What actually helped me was to turn off the Resharper build and to use the VisualStudio Re-Build option on my project.
from Tools>>NuGet Package Manager>>Manage Package for solution
update Newtonsoft.Json of all solutions to latest Version
if you're working with some kind of subversion:
delete the project and re-download it, it worked for me :S
I had the same issue on a Test Project that had reference to an MVC 5 project. This happened after I merged with an MVC 5 project. I fixed it by installing Visual studio 2012 updates as explained here in Andre's response.
In your visual studio go to
Tools> Extensions And Updates
Select "Updates" in the accordion list on the left.
Select "Product Updates".
Update to the newest version
I Don't know why, but in my case, even if I remove bin folder from project, when I build project it copies old version of newtonsoft.json, I copied new version's dll from packages folder and It solves for now.
If none of these works, please check this answer:
https://stackoverflow.com/a/12011221/150370
(TL;DR: Remove xml namespace from configuration tag in your config file. Otherwise binding redirects will be ignored)
In some cases if you delete your Bin and Obj folders will solve this problem.
Alright so I guess the thing to do is add my answer here to this long list versus creating a duplicate question...
If you are getting this in 2019, using .NET Core 3.0 (Preview at this time), the solution is to ensure all projects are targeting the same .NET Core version (in my case 3.0). I think I had one project in the solution targeting 2.1 and the rest were 2.2 so I probably could have stuck with 2.2...
I don't even have Newtonsoft.Json installed in any of the projects, and naturally adding it to them did not fix the issue.
If you have .NET Standard class libraries or w/e in your solution, they don't need to be on the same version, though they should probably be the latest you can go. For example, my .NET Standard class libraries are on 2.2 as there is not a .NET Standard 3.0 yet.
None of the answers, including the checked one did not work for me.
The solution was far more simple. I first removed the references from my BUS layer. Then deleted the dll's from the project (to make sure it's gone), then reinstalled JSON.NET from nuget packeges. And, the tricky part was, "turning it off and on again".
I just restarted visual studio, and there it worked!
So, if you try everything possible and still can't solve the problem, just try turning visual studio off and on again, it might help.
I resolved it by remove lower version of Newtonsoft.json.dll in bin folder and added Newtonsoft.json.dll V6.0.0.0 and removed the following web.config elements
<dependentAssembly>
<assemblyIdentity name="Newtonsoft.Json" publicKeyToken="30ad4fe6b2a6aeed"/>
<bindingRedirect oldVersion="0.0.0.0-4.5.0.0" newVersion="5.0.8"/>
</dependentAssembly>
I got the same problem with dotnet core and managed to fix it by clearing the NuGet cache.
Open the powershell and enter the following command.
dotnet nuget locals all --clear
Then I closed Visual Studio, opened it again and entered the following command into the Package Manager Console:
Update-Package
NuGet should now restore all packages and popultes the nuget cache again.
After that I was able to build and start my dotnet core webapi in a Linux container.
the solution that solved my problem for this is
goto references->right click Newtonsoft.json--goto properties and check the version
this same version should be in
<dependentAssembly>
<assemblyIdentity name="Newtonsoft.Json" publicKeyToken="30ad4fe6b2a6aeed" culture="neutral" />
<bindingRedirect oldVersion="0.0.0.0-YourDllVersion" newVersion="YourDllVersion" />
</dependentAssembly>
Easy steps.
(1)Run "update-package Newtonsoft.Json -reinstall" in package manager.
(2)Delete you bin by enabling viewing the hidden files and deleting the bin folder.
(3)Close your visual studio and re-open it.
(4) Now run your project again.
I believe it should be ok
I hit this problem because I had: project A (a desktop .exe) refer to project B (a portable .dll). A & B had different versions of JSON.Net, and so there was a loader conflict.
Once I made all the versions of JSON.net the same, it worked. (This is in effect what some of the solutions above are doing - I'm just calling out why it works)
I struggled with this recently with and older project.
I managed to track down the problem after checking what version of the dll that actually was in the bin folder.
I had a post-build script that copied dependent assemblies from a dll library folder to the bin folder. A common setup from the days before nuget.
So every time I built the post-build script replaced the correct version of Json.net with the older one
I had exactly the same issue and Visual Studio 13 default library for me was 4.5, so I have 2 solutions one is take out the reference to this in the webconfig file. That is a last resort and it does work.
The error message states there is an issue at this location /Projects/foo/bar/bin/Newtonsoft.Json.DLL. where the DLL is! A basic property check told me it was 4.5.0.0 or alike so I changed the webconfig to look upto 4.5 and use 4.5.
None of these options worked for me, in the end it was;
Test > Test Settings > *.testrunconfig
I had to add a new line
<DeploymentItem filename="packages\Newtonsoft.Json.4.5.8\lib\net40\Newtonsoft.Json.dll" />
Make sure the path and version is correct for your setup.
This problem was not solved for me by refreshing NuGet Packages or by performing a "Clean" on the project. It was solved by clearing out the "obj" folder manually.
Here is my solution to this problem,make sure the version number in appconfig or packageconfig is same as the reference version in your references.
See here
In my case, at the message of error was "version 6.0.0", but this version is not available to install, so i installed the "6.0.1 version" at my project and solved my problem.
install-package Newtonsoft.Json -Version 6.0.1 -Project MyProjectX
I've tried every solution I've found on the web with no success. I continually get the error:
Running transformation: System.InvalidOperationException: The SSDL generated by the activity
called 'CsdlToSsdlAndMslActivity' is not valid and has the following errors:
No Entity Framework provider found for the ADO.NET provider with invariant name
'MySql.Data.MySqlClient'. Make sure the provider is registered in the 'entityFramework'
section of the application config file. See http://go.microsoft.com/fwlink/?LinkId=260882 for
more information.
I have an empty Console project and a very basic model to test this with. Through the NuGet Package Console I'd executed: Install-Package MySQL.Data.Entities which installed EF6, MySQL.Data and MySQL.Data.Entities and hooked up all the references and copied the relevant DLL's into the bin/Debug folder.
I wired up the provider in the following (entire config file listed)
<?xml version="1.0" encoding="utf-8"?>
<configuration>
<configSections>
<!-- For more information on Entity Framework configuration, visit http://go.microsoft.com/fwlink/?LinkID=237468 -->
<section name="entityFramework" type="System.Data.Entity.Internal.ConfigFile.EntityFrameworkSection, EntityFramework, Version=6.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" requirePermission="false" />
</configSections>
<startup>
<supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.5" />
</startup>
<entityFramework>
<defaultConnectionFactory type="System.Data.Entity.Infrastructure.SqlConnectionFactory, EntityFramework" />
<providers>
<provider invariantName="System.Data.SqlClient" type="System.Data.Entity.SqlServer.SqlProviderServices, EntityFramework.SqlServer" />
<provider invariantName="MySql.Data.MySqlClient" type="MySql.Data.MySqlClient.MySqlProviderServices, MySql.Data.Entity.EF6"></provider>
</providers>
</entityFramework>
</configuration>
As far as I can tell I have the provider registered. I have the latest MySQL connector updated as well. Where am I going wrong?
To support full functionality EF Designer requires 3 things:
EF runtime provider (you seem to have it)
DDEX provider for your database - DDEX is the way VS abstracts databases and as a result can talk to any database. Note that this is not something that is EF specific but EF Designer relies on it (again you seem to have it otherwise you would not be able to select MySQL connection)
Additional components (T4 templates/Workflow activities) required to support Model First flow - these are EF specific but typically installed as part of the DDEX provider - you seem to be missing this or you did not select the T4 template/workflow specific to your provider (open the edmx file and go to the properties window there are two options there that are interesting from DDL generation perspective - the "Database Generation Workflow" and the "DDL Generation Template". Click the dropdowns to see if you can select something that is MySQL specific)
Because you don't seem to have or use the workflow/T4 for MySQL (note I don't know if this is because you did not select the correct T4/workflow (see above) or MySQL DDEX does not support this or the installation is for whatever reason broken) EF Designer is using the default workflow which is for Sql Server. The default workflow relies on being able to find EF providers (for SqlServer and SqlServerCe) in the default path but the provider for MySQL is not there - hence the error. Note that the workflow and T4 templates for creating DDL are provider specific so even if you copied the MySQL provider to the default path it would not really work - you would get a peculiar result of SQL Server specific SQL Script using MySQL types.
We have a bug on improving this a little bit by providing a better guidance instead of just invoking the default DDL generation which we know will not work. You can also find some details in this bug.
I would suggest checking if MySQL components you are using do support Model First. An alternative would be just to move to Code First which only requires the EF runtime provider you already have to generate the DDL.
The other answer already kind of says this, but it's buried in his long post.
Notice that the error message refers to SSDLToSQL10.tt. You don't want that .tt file, you want the MySQL one. In the EF designer properties window, find the DDL Generation Template property and change it from SSDLToSQL10.tt to SSDLToMySQL.tt.
I have an ASP.NET application that I would like to upload to a host that offers a MySQL database. I am using Visual Studio 2012, .NET 4.5, Entity Framework 5.0, and I have installed MySQL for Visual Studio 1.0.2. I have been trying to connect to a local MySQL server, but I have encountered some problems.
At first I referenced MySql.Data and MySql.Data.Entity at version 6.6.5.0 in my project. But when I tried to do Update-Database in the package manager console, I got the following error:
System.DateTime System.Data.Entity.Migrations.Model.InsertHistoryOperation.get_CreatedOn()
This seems to be a problem with Entity Framework 5.0 and earlier versions of Connector/.Net - the MySQL connector for visual studio. Since the process was one of discovery, I unfortunately can't recall how my project came to reference MySql.Data and MySql.Data.Entity version 6.6.5.0.
I deleted the references, and then downloaded and referenced the same assemblies in version 6.7.4.0, using NuGet. This solved the error I got before, but now Update-Database gives me the following error:
Could not load file or assembly 'MySql.Data, Version=6.6.5.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d' or one of its dependencies.
The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
I have solved this problem by including a specific DbProviderFactory in my Web.Config file:
<system.data>
<DbProviderFactories>
<remove invariant="MySql.Data.MySqlClient" />
<add name="MySQL Data Provider"
invariant="MySql.Data.MySqlClient"
description=".Net Framework Data Provider for MySQL"
type="MySql.Data.MySqlClient.MySqlClientFactory, MySql.Data, Version=6.7.4.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d" />
</DbProviderFactories>
</system.data>
If I leave out the remove tag, I get the error:
Column 'InvariantName' is constrained to be unique. Value 'MySql.Data.MySqlClient' is already present.
I think this means that somehow my project still has a DbProviderFactory that serves version 6.6.5.0 of the MySQL libraries. But when I search the text files of my project, I can't find the string 6.6.5.0 anywhere.
At the moment this solution lets me connect to my local MySQL server, but when I publish the project to my hosting provider and go to the web site in my browser, I just get an error message. I would like to know how to remove the implicit 6.6.5.0-serving DbProviderFactory, both as part of my learning and because I think my workaround could be the reason that my web site doesn't work at my hosting provider.
As a clue in finding a solution, I find it suspicious that when I try to add a reference, I can only see (several versions of) 6.6.5.0:
But when I go to the NuGet manager, I only have version 6.7.4.0 installed:
Hope this helps.
I wrote a blog post on this subject, my project is available for download at the bottom of this paper.
I had to install (as noted in my article) MySqlDataEntity -Pre, which install the beta version 6.7.2 beta, to get good compatibility with EF 5, but I see that now the current version is noted 6.7.4, so I updated my project accordingly, and it works just as well, so I also updated the project to download from my blog.
Hope this can help you to start with EF and MySql.
BTW, in case this is not clear, you have to install, from NuGet, MySql.Data.Entities, which will also install MYSql.Data, as Entities is depending on it.
long-time listener, first-time caller!
I’m trying to connect to MySQL using the ADO.NET Entity Framework. (Visual Studio 2010, .NET 4.0) I created a web project and another class library project to serve as my DAL. On my local machine, I have no problems, and I have also tried running with Medium trust. I’m able to fully control the db as expected.
When I deploy to my host (shared, medium trust) however, I keep getting errors. I have tweaked my web.config multiple ways: I’ve explicitly called my assembly in the connection string, I’ve used the wildcard mapping, I added references to the MySQL dll’s, etc.
<connectionStrings>
<add name="NamespaceContext" connectionString="metadata=res:// Namespace.Data.Model, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null/DataModel.csdl|res:// Namespace.Data.Model, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null/DataModel.ssdl|res:// Namespace.Data.Model, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null/DataModel.msl;provider=MySql.Data.MySqlClient;provider connection string="server=myserver;User Id=user;database=thedatabase;password=password;Persist Security Info=True"" providerName="System.Data.EntityClient"/>
<add name=" NamespaceContext " connectionString="metadata=res://*/;provider=MySql.Data.MySqlClient;provider connection string=" server=myserver;User Id=user;database=thedatabase;password=password;Persist Security Info=True"" providerName="System.Data.EntityClient"/>
<add name=" NamespaceContext " connectionString="metadata=res://*/DataModel.csdl|res://*/DataModel.ssdl|res://*/DataModel.msl;provider=MySql.Data.MySqlClient;provider connection string=" server=myserver;User Id=user;database=thedatabase;password=password;Persist Security Info=True"" providerName="System.Data.EntityClient" />
</connectionStrings>
The error I keep getting is:
System.ArgumentException: The specified store provider cannot be found in the configuration, or is not valid. --->
System.ArgumentException: Unable to find the requested .Net Framework Data Provider. It may not be installed.
at System.Data.Common.DbProviderFactories.GetFactory(String providerInvariantName)
at System.Data.EntityClient.EntityConnection.GetFactory(String providerString)
--- End of inner exception stack trace ---
at System.Data.EntityClient.EntityConnection.GetFactory(String providerString)
at System.Data.EntityClient.EntityConnection.ChangeConnectionString(String newConnectionString)
at System.Data.EntityClient.EntityConnection..ctor(String connectionString)
at MyNamespace.Web.Html.TestPage.EntityFrameworkTestButton_Click(Object sender, EventArgs e)
I talked to their support guys (who aren’t devs) but they said the MySQL connector is installed and in the GAC. I tried to use the DbProviderFactories section in my web.config, like the following:
<system.data>
<DbProviderFactories>
<clear/>
<remove invariant="MySql.Data.MySqlClient"/>
<add name="MySQL Data Provider" invariant="MySql.Data.MySqlClient" description=".Net Framework Data Provider for MySQL" type="MySql.Data.MySqlClient.MySqlClientFactory, MySql.Data, Version=6.3.5.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d"/>
</DbProviderFactories>
</system.data>
I was hoping I could control this and reference the provider in my project. I then receive the following error:
System.Data.MetadataException: Schema specified is not valid.
Errors: error 0194: All artifacts loaded into an ItemCollection must have the same version. Multiple versions were encountered.
MySql.Data.Entity.Properties.SchemaDefinition-6.0.ssdl(4,9) : error 0169: All SSDL artifacts must target the same provider. The ProviderManifestToken '5' is different from '5.0' that was encountered earlier.
error 0194: All artifacts loaded into an ItemCollection must have the same version.
(lots of the same error message was snipped for brevity)
I am at a complete loss. I tried strongly signing my DAL project, not using a DAL and just creating the .edmx in the web project, all to no avail. I could have sworn I got it working at some point, but perhaps I was delirious.
Sorry for the wall o' text. Can anyone help or shed some light?
Thanks!
What happens if you put the mysql dll in your bin folder? Alternatively, try to remove the version restriction on the mysql dll, they may not have that exact version loaded on their servers.
I had a very similar problem in my application, where I was using the MySQL connector for a MySQL database and the Entity Framework for a SQL Server database (two separate connections, one project). The MySQL.Data.Entity DLL seems to fight with the entity framework. I didn't actually need it so I removed it... but the error persisted!
Finally out of desperation I just deleted my bin and obj folders and recompiled. Problem solved. I guess something was cached or hanging around in my folders, even after I ran a clean and rebuild. Something to try anyways if someone else runs into this.