Related
Locked. This question and its answers are locked because the question is off-topic but has historical significance. It is not currently accepting new answers or interactions.
So I'm using an app that stores images heavily in the DB. What's your outlook on this? I'm more of a type to store the location in the filesystem, than store it directly in the DB.
What do you think are the pros/cons?
I'm in charge of some applications that manage many TB of images. We've found that storing file paths in the database to be best.
There are a couple of issues:
database storage is usually more expensive than file system storage
you can super-accelerate file system access with standard off the shelf products
for example, many web servers use the operating system's sendfile() system call to asynchronously send a file directly from the file system to the network interface. Images stored in a database don't benefit from this optimization.
things like web servers, etc, need no special coding or processing to access images in the file system
databases win out where transactional integrity between the image and metadata are important.
it is more complex to manage integrity between db metadata and file system data
it is difficult (within the context of a web application) to guarantee data has been flushed to disk on the filesystem
As with most issues, it's not as simple as it sounds. There are cases where it would make sense to store the images in the database.
You are storing images that are
changing dynamically, say invoices and you wanted
to get an invoice as it was on 1 Jan
2007?
The government wants you to maintain 6 years of history
Images stored in the database do not require a different backup strategy. Images stored on filesystem do
It is easier to control access to the images if they are in a database. Idle admins can access any folder on disk. It takes a really determined admin to go snooping in a database to extract the images
On the other hand there are problems associated
Require additional code to extract
and stream the images
Latency may be
slower than direct file access
Heavier load on the database server
File store. Facebook engineers had a great talk about it. One take away was to know the practical limit of files in a directory.
Needle in a Haystack: Efficient Storage of Billions of Photos
This might be a bit of a long shot, but if you're using (or planning on using) SQL Server 2008 I'd recommend having a look at the new FileStream data type.
FileStream solves most of the problems around storing the files in the DB:
The Blobs are actually stored as files in a folder.
The Blobs can be accessed using either a database connection or over the filesystem.
Backups are integrated.
Migration "just works".
However SQL's "Transparent Data Encryption" does not encrypt FileStream objects, so if that is a consideration, you may be better off just storing them as varbinary.
From the MSDN Article:
Transact-SQL statements can insert, update, query, search, and back up FILESTREAM data. Win32 file system interfaces provide streaming access to the data.
FILESTREAM uses the NT system cache for caching file data. This helps reduce any effect that FILESTREAM data might have on Database Engine performance. The SQL Server buffer pool is not used; therefore, this memory is available for query processing.
File paths in the DB is definitely the way to go - I've heard story after story from customers with TB of images that it became a nightmare trying to store any significant amount of images in a DB - the performance hit alone is too much.
In my experience, sometimes the simplest solution is to name the images according to the primary key. So it's easy to find the image that belongs to a particular record, and vice versa. But at the same time you're not storing anything about the image in the database.
The trick here is to not become a zealot.
One thing to note here is that no one in the pro file system camp has listed a particular file system. Does this mean that everything from FAT16 to ZFS handily beats every database?
No.
The truth is that many databases beat many files systems, even when we're only talking about raw speed.
The correct course of action is to make the right decision for your precise scenario, and to do that, you'll need some numbers and some use case estimates.
In places where you MUST guarantee referential integrity and ACID compliance, storing images in the database is required.
You cannot transactionaly guarantee that the image and the meta-data about that image stored in the database refer to the same file. In other words, it is impossible to guarantee that the file on the filesystem is only ever altered at the same time and in the same transaction as the metadata.
As others have said SQL 2008 comes with a Filestream type that allows you to store a filename or identifier as a pointer in the db and automatically stores the image on your filesystem which is a great scenario.
If you're on an older database, then I'd say that if you're storing it as blob data, then you're really not going to get anything out of the database in the way of searching features, so it's probably best to store an address on a filesystem, and store the image that way.
That way you also save space on your filesystem, as you are only going to save the exact amount of space, or even compacted space on the filesystem.
Also, you could decide to save with some structure or elements that allow you to browse the raw images in your filesystem without any db hits, or transfer the files in bulk to another system, hard drive, S3 or another scenario - updating the location in your program, but keep the structure, again without much of a hit trying to bring the images out of your db when trying to increase storage.
Probably, it would also allow you to throw some caching element, based on commonly hit image urls into your web engine/program, so you're saving yourself there as well.
Small static images (not more than a couple of megs) that are not frequently edited, should be stored in the database. This method has several benefits including easier portability (images are transferred with the database), easier backup/restore (images are backed up with the database) and better scalability (a file system folder with thousands of little thumbnail files sounds like a scalability nightmare to me).
Serving up images from a database is easy, just implement an http handler that serves the byte array returned from the DB server as a binary stream.
Here's an interesting white paper on the topic.
To BLOB or Not To BLOB: Large Object Storage in a Database or a Filesystem
The answer is "It depends." Certainly it would depend upon the database server and its approach to blob storage. It also depends on the type of data being stored in blobs, as well as how that data is to be accessed.
Smaller sized files can be efficiently stored and delivered using the database as the storage mechanism. Larger files would probably be best stored using the file system, especially if they will be modified/updated often. (blob fragmentation becomes an issue in regards to performance.)
Here's an additional point to keep in mind. One of the reasons supporting the use of a database to store the blobs is ACID compliance. However, the approach that the testers used in the white paper, (Bulk Logged option of SQL Server,) which doubled SQL Server throughput, effectively changed the 'D' in ACID to a 'd,' as the blob data was not logged with the initial writes for the transaction. Therefore, if full ACID compliance is an important requirement for your system, halve the SQL Server throughput figures for database writes when comparing file I/O to database blob I/O.
One thing that I haven't seen anyone mention yet but is definitely worth noting is that there are issues associated with storing large amounts of images in most filesystems too. For example if you take the approach mentioned above and name each image file after the primary key, on most filesystems you will run into issues if you try to put all of the images in one big directory once you reach a very large number of images (e.g. in the hundreds of thousands or millions).
Once common solution to this is to hash them out into a balanced tree of subdirectories.
Something nobody has mentioned is that the DB guarantees atomic actions, transactional integrity and deals with concurrency. Even referentially integrity is out of the window with a filesystem - so how do you know your file names are really still correct?
If you have your images in a file-system and someone is reading the file as you're writing a new version or even deleting the file - what happens?
We use blobs because they're easier to manage (backup, replication, transfer) too. They work well for us.
The problem with storing only filepaths to images in a database is that the database's integrity can no longer be forced.
If the actual image pointed to by the filepath becomes unavailable, the database unwittingly has an integrity error.
Given that the images are the actual data being sought after, and that they can be managed easier (the images won't suddenly disappear) in one integrated database rather than having to interface with some kind of filesystem (if the filesystem is independently accessed, the images MIGHT suddenly "disappear"), I'd go for storing them directly as a BLOB or such.
At a company where I used to work we stored 155 million images in an Oracle 8i (then 9i) database. 7.5TB worth.
Normally, I'm storngly against taking the most expensive and hardest to scale part of your infrastructure (the database) and putting all load into it. On the other hand: It greatly simplifies backup strategy, especially when you have multiple web servers and need to somehow keep the data synchronized.
Like most other things, It depends on the expected size and Budget.
We have implemented a document imaging system that stores all it's images in SQL2005 blob fields. There are several hundred GB at the moment and we are seeing excellent response times and little or no performance degradation. In addition, fr regulatory compliance, we have a middleware layer that archives newly posted documents to an optical jukebox system which exposes them as a standard NTFS file system.
We've been very pleased with the results, particularly with respect to:
Ease of Replication and Backup
Ability to easily implement a document versioning system
If this is web-based application then there could be advantages to storing the images on a third-party storage delivery network, such as Amazon's S3 or the Nirvanix platform.
Assumption: Application is web enabled/web based
I'm surprised no one has really mentioned this ... delegate it out to others who are specialists -> use a 3rd party image/file hosting provider.
Store your files on a paid online service like
Amazon S3
Moso Cloud Storage
Another StackOverflow threads talking about this here.
This thread explains why you should use a 3rd party hosting provider.
It's so worth it. They store it efficiently. No bandwith getting uploaded from your servers to client requests, etc.
If you're not on SQL Server 2008 and you have some solid reasons for putting specific image files in the database, then you could take the "both" approach and use the file system as a temporary cache and use the database as the master repository.
For example, your business logic can check if an image file exists on disc before serving it up, retrieving from the database when necessary. This buys you the capability of multiple web servers and fewer sync issues.
I'm not sure how much of a "real world" example this is, but I currently have an application out there that stores details for a trading card game, including the images for the cards. Granted the record count for the database is only 2851 records to date, but given the fact that certain cards have are released multiple times and have alternate artwork, it was actually more efficient sizewise to scan the "primary square" of the artwork and then dynamically generate the border and miscellaneous effects for the card when requested.
The original creator of this image library created a data access class that renders the image based on the request, and it does it quite fast for viewing and individual card.
This also eases deployment/updates when new cards are released, instead of zipping up an entire folder of images and sending those down the pipe and ensuring the proper folder structure is created, I simply update the database and have the user download it again. This currently sizes up to 56MB, which isn't great, but I'm working on an incremental update feature for future releases. In addition, there is a "no images" version of the application that allows those over dial-up to get the application without the download delay.
This solution has worked great to date since the application itself is targeted as a single instance on the desktop. There is a web site where all of this data is archived for online access, but I would in no way use the same solution for this. I agree the file access would be preferable because it would scale better to the frequency and volume of requests being made for the images.
Hopefully this isn't too much babble, but I saw the topic and wanted to provide some my insights from a relatively successful small/medium scale application.
SQL Server 2008 offers a solution that has the best of both worlds : The filestream data type.
Manage it like a regular table and have the performance of the file system.
It depends on the number of images you are going to store and also their sizes. I have used databases to store images in the past and my experience has been fairly good.
IMO, Pros of using database to store images are,
A. You don't need FS structure to hold your images
B. Database indexes perform better than FS trees when more number of items are to be stored
C. Smartly tuned database perform good job at caching the query results
D. Backups are simple. It also works well if you have replication set up and content is delivered from a server near to user. In such cases, explicit synchronization is not required.
If your images are going to be small (say < 64k) and the storage engine of your db supports inline (in record) BLOBs, it improves performance further as no indirection is required (Locality of reference is achieved).
Storing images may be a bad idea when you are dealing with small number of huge sized images. Another problem with storing images in db is that, metadata like creation, modification dates must handled by your application.
I have recently created a PHP/MySQL app which stores PDFs/Word files in a MySQL table (as big as 40MB per file so far).
Pros:
Uploaded files are replicated to backup server along with everything else, no separate backup strategy is needed (peace of mind).
Setting up the web server is slightly simpler because I don't need to have an uploads/ folder and tell all my applications where it is.
I get to use transactions for edits to improve data integrity - I don't have to worry about orphaned and missing files
Cons:
mysqldump now takes a looooong time because there is 500MB of file data in one of the tables.
Overall not very memory/cpu efficient when compared to filesystem
I'd call my implementation a success, it takes care of backup requirements and simplifies the layout of the project. The performance is fine for the 20-30 people who use the app.
Im my experience I had to manage both situations: images stored in database and images on the file system with path stored in db.
The first solution, images in database, is somewhat "cleaner" as your data access layer will have to deal only with database objects; but this is good only when you have to deal with low numbers.
Obviously database access performance when you deal with binary large objects is degrading, and the database dimensions will grow a lot, causing again performance loss... and normally database space is much more expensive than file system space.
On the other hand having large binary objects stored in file system will cause you to have backup plans that have to consider both database and file system, and this can be an issue for some systems.
Another reason to go for file system is when you have to share your images data (or sounds, video, whatever) with third party access: in this days I'm developing a web app that uses images that have to be accessed from "outside" my web farm in such a way that a database access to retrieve binary data is simply impossible. So sometimes there are also design considerations that will drive you to a choice.
Consider also, when making this choice, if you have to deal with permission and authentication when accessing binary objects: these requisites normally can be solved in an easier way when data are stored in db.
I once worked on an image processing application. We stored the uploaded images in a directory that was something like /images/[today's date]/[id number]. But we also extracted the metadata (exif data) from the images and stored that in the database, along with a timestamp and such.
In a previous project i stored images on the filesystem, and that caused a lot of headaches with backups, replication, and the filesystem getting out of sync with the database.
In my latest project i'm storing images in the database, and caching them on the filesystem, and it works really well. I've had no problems so far.
Second the recommendation on file paths. I've worked on a couple of projects that needed to manage large-ish asset collections, and any attempts to store things directly in the DB resulted in pain and frustration long-term.
The only real "pro" I can think of regarding storing them in the DB is the potential for easy of individual image assets. If there are no file paths to use, and all images are streamed straight out of the DB, there's no danger of a user finding files they shouldn't have access to.
That seems like it would be better solved with an intermediary script pulling data from a web-inaccessible file store, though. So the DB storage isn't REALLY necessary.
The word on the street is that unless you are a database vendor trying to prove that your database can do it (like, let's say Microsoft boasting about Terraserver storing a bajillion images in SQL Server) it's not a very good idea. When the alternative - storing images on file servers and paths in the database is so much easier, why bother? Blob fields are kind of like the off-road capabilities of SUVs - most people don't use them, those who do usually get in trouble, and then there are those who do, but only for the fun of it.
Storing an image in the database still means that the image data ends up somewhere in the file system but obscured so that you cannot access it directly.
+ves:
database integrity
its easy to manage since you don't have to worry about keeping the filesystem in sync when an image is added or deleted
-ves:
performance penalty -- a database lookup is usually slower that a filesystem lookup
you cannot edit the image directly (crop, resize)
Both methods are common and practiced. Have a look at the advantages and disadvantages. Either way, you'll have to think about how to overcome the disadvantages. Storing in database usually means tweaking database parameters and implement some kind of caching. Using filesystem requires you to find some way of keeping filesystem+database in sync.
Locked. This question and its answers are locked because the question is off-topic but has historical significance. It is not currently accepting new answers or interactions.
So I'm using an app that stores images heavily in the DB. What's your outlook on this? I'm more of a type to store the location in the filesystem, than store it directly in the DB.
What do you think are the pros/cons?
I'm in charge of some applications that manage many TB of images. We've found that storing file paths in the database to be best.
There are a couple of issues:
database storage is usually more expensive than file system storage
you can super-accelerate file system access with standard off the shelf products
for example, many web servers use the operating system's sendfile() system call to asynchronously send a file directly from the file system to the network interface. Images stored in a database don't benefit from this optimization.
things like web servers, etc, need no special coding or processing to access images in the file system
databases win out where transactional integrity between the image and metadata are important.
it is more complex to manage integrity between db metadata and file system data
it is difficult (within the context of a web application) to guarantee data has been flushed to disk on the filesystem
As with most issues, it's not as simple as it sounds. There are cases where it would make sense to store the images in the database.
You are storing images that are
changing dynamically, say invoices and you wanted
to get an invoice as it was on 1 Jan
2007?
The government wants you to maintain 6 years of history
Images stored in the database do not require a different backup strategy. Images stored on filesystem do
It is easier to control access to the images if they are in a database. Idle admins can access any folder on disk. It takes a really determined admin to go snooping in a database to extract the images
On the other hand there are problems associated
Require additional code to extract
and stream the images
Latency may be
slower than direct file access
Heavier load on the database server
File store. Facebook engineers had a great talk about it. One take away was to know the practical limit of files in a directory.
Needle in a Haystack: Efficient Storage of Billions of Photos
This might be a bit of a long shot, but if you're using (or planning on using) SQL Server 2008 I'd recommend having a look at the new FileStream data type.
FileStream solves most of the problems around storing the files in the DB:
The Blobs are actually stored as files in a folder.
The Blobs can be accessed using either a database connection or over the filesystem.
Backups are integrated.
Migration "just works".
However SQL's "Transparent Data Encryption" does not encrypt FileStream objects, so if that is a consideration, you may be better off just storing them as varbinary.
From the MSDN Article:
Transact-SQL statements can insert, update, query, search, and back up FILESTREAM data. Win32 file system interfaces provide streaming access to the data.
FILESTREAM uses the NT system cache for caching file data. This helps reduce any effect that FILESTREAM data might have on Database Engine performance. The SQL Server buffer pool is not used; therefore, this memory is available for query processing.
File paths in the DB is definitely the way to go - I've heard story after story from customers with TB of images that it became a nightmare trying to store any significant amount of images in a DB - the performance hit alone is too much.
In my experience, sometimes the simplest solution is to name the images according to the primary key. So it's easy to find the image that belongs to a particular record, and vice versa. But at the same time you're not storing anything about the image in the database.
The trick here is to not become a zealot.
One thing to note here is that no one in the pro file system camp has listed a particular file system. Does this mean that everything from FAT16 to ZFS handily beats every database?
No.
The truth is that many databases beat many files systems, even when we're only talking about raw speed.
The correct course of action is to make the right decision for your precise scenario, and to do that, you'll need some numbers and some use case estimates.
In places where you MUST guarantee referential integrity and ACID compliance, storing images in the database is required.
You cannot transactionaly guarantee that the image and the meta-data about that image stored in the database refer to the same file. In other words, it is impossible to guarantee that the file on the filesystem is only ever altered at the same time and in the same transaction as the metadata.
As others have said SQL 2008 comes with a Filestream type that allows you to store a filename or identifier as a pointer in the db and automatically stores the image on your filesystem which is a great scenario.
If you're on an older database, then I'd say that if you're storing it as blob data, then you're really not going to get anything out of the database in the way of searching features, so it's probably best to store an address on a filesystem, and store the image that way.
That way you also save space on your filesystem, as you are only going to save the exact amount of space, or even compacted space on the filesystem.
Also, you could decide to save with some structure or elements that allow you to browse the raw images in your filesystem without any db hits, or transfer the files in bulk to another system, hard drive, S3 or another scenario - updating the location in your program, but keep the structure, again without much of a hit trying to bring the images out of your db when trying to increase storage.
Probably, it would also allow you to throw some caching element, based on commonly hit image urls into your web engine/program, so you're saving yourself there as well.
Small static images (not more than a couple of megs) that are not frequently edited, should be stored in the database. This method has several benefits including easier portability (images are transferred with the database), easier backup/restore (images are backed up with the database) and better scalability (a file system folder with thousands of little thumbnail files sounds like a scalability nightmare to me).
Serving up images from a database is easy, just implement an http handler that serves the byte array returned from the DB server as a binary stream.
Here's an interesting white paper on the topic.
To BLOB or Not To BLOB: Large Object Storage in a Database or a Filesystem
The answer is "It depends." Certainly it would depend upon the database server and its approach to blob storage. It also depends on the type of data being stored in blobs, as well as how that data is to be accessed.
Smaller sized files can be efficiently stored and delivered using the database as the storage mechanism. Larger files would probably be best stored using the file system, especially if they will be modified/updated often. (blob fragmentation becomes an issue in regards to performance.)
Here's an additional point to keep in mind. One of the reasons supporting the use of a database to store the blobs is ACID compliance. However, the approach that the testers used in the white paper, (Bulk Logged option of SQL Server,) which doubled SQL Server throughput, effectively changed the 'D' in ACID to a 'd,' as the blob data was not logged with the initial writes for the transaction. Therefore, if full ACID compliance is an important requirement for your system, halve the SQL Server throughput figures for database writes when comparing file I/O to database blob I/O.
One thing that I haven't seen anyone mention yet but is definitely worth noting is that there are issues associated with storing large amounts of images in most filesystems too. For example if you take the approach mentioned above and name each image file after the primary key, on most filesystems you will run into issues if you try to put all of the images in one big directory once you reach a very large number of images (e.g. in the hundreds of thousands or millions).
Once common solution to this is to hash them out into a balanced tree of subdirectories.
Something nobody has mentioned is that the DB guarantees atomic actions, transactional integrity and deals with concurrency. Even referentially integrity is out of the window with a filesystem - so how do you know your file names are really still correct?
If you have your images in a file-system and someone is reading the file as you're writing a new version or even deleting the file - what happens?
We use blobs because they're easier to manage (backup, replication, transfer) too. They work well for us.
The problem with storing only filepaths to images in a database is that the database's integrity can no longer be forced.
If the actual image pointed to by the filepath becomes unavailable, the database unwittingly has an integrity error.
Given that the images are the actual data being sought after, and that they can be managed easier (the images won't suddenly disappear) in one integrated database rather than having to interface with some kind of filesystem (if the filesystem is independently accessed, the images MIGHT suddenly "disappear"), I'd go for storing them directly as a BLOB or such.
At a company where I used to work we stored 155 million images in an Oracle 8i (then 9i) database. 7.5TB worth.
Normally, I'm storngly against taking the most expensive and hardest to scale part of your infrastructure (the database) and putting all load into it. On the other hand: It greatly simplifies backup strategy, especially when you have multiple web servers and need to somehow keep the data synchronized.
Like most other things, It depends on the expected size and Budget.
We have implemented a document imaging system that stores all it's images in SQL2005 blob fields. There are several hundred GB at the moment and we are seeing excellent response times and little or no performance degradation. In addition, fr regulatory compliance, we have a middleware layer that archives newly posted documents to an optical jukebox system which exposes them as a standard NTFS file system.
We've been very pleased with the results, particularly with respect to:
Ease of Replication and Backup
Ability to easily implement a document versioning system
If this is web-based application then there could be advantages to storing the images on a third-party storage delivery network, such as Amazon's S3 or the Nirvanix platform.
Assumption: Application is web enabled/web based
I'm surprised no one has really mentioned this ... delegate it out to others who are specialists -> use a 3rd party image/file hosting provider.
Store your files on a paid online service like
Amazon S3
Moso Cloud Storage
Another StackOverflow threads talking about this here.
This thread explains why you should use a 3rd party hosting provider.
It's so worth it. They store it efficiently. No bandwith getting uploaded from your servers to client requests, etc.
If you're not on SQL Server 2008 and you have some solid reasons for putting specific image files in the database, then you could take the "both" approach and use the file system as a temporary cache and use the database as the master repository.
For example, your business logic can check if an image file exists on disc before serving it up, retrieving from the database when necessary. This buys you the capability of multiple web servers and fewer sync issues.
I'm not sure how much of a "real world" example this is, but I currently have an application out there that stores details for a trading card game, including the images for the cards. Granted the record count for the database is only 2851 records to date, but given the fact that certain cards have are released multiple times and have alternate artwork, it was actually more efficient sizewise to scan the "primary square" of the artwork and then dynamically generate the border and miscellaneous effects for the card when requested.
The original creator of this image library created a data access class that renders the image based on the request, and it does it quite fast for viewing and individual card.
This also eases deployment/updates when new cards are released, instead of zipping up an entire folder of images and sending those down the pipe and ensuring the proper folder structure is created, I simply update the database and have the user download it again. This currently sizes up to 56MB, which isn't great, but I'm working on an incremental update feature for future releases. In addition, there is a "no images" version of the application that allows those over dial-up to get the application without the download delay.
This solution has worked great to date since the application itself is targeted as a single instance on the desktop. There is a web site where all of this data is archived for online access, but I would in no way use the same solution for this. I agree the file access would be preferable because it would scale better to the frequency and volume of requests being made for the images.
Hopefully this isn't too much babble, but I saw the topic and wanted to provide some my insights from a relatively successful small/medium scale application.
SQL Server 2008 offers a solution that has the best of both worlds : The filestream data type.
Manage it like a regular table and have the performance of the file system.
It depends on the number of images you are going to store and also their sizes. I have used databases to store images in the past and my experience has been fairly good.
IMO, Pros of using database to store images are,
A. You don't need FS structure to hold your images
B. Database indexes perform better than FS trees when more number of items are to be stored
C. Smartly tuned database perform good job at caching the query results
D. Backups are simple. It also works well if you have replication set up and content is delivered from a server near to user. In such cases, explicit synchronization is not required.
If your images are going to be small (say < 64k) and the storage engine of your db supports inline (in record) BLOBs, it improves performance further as no indirection is required (Locality of reference is achieved).
Storing images may be a bad idea when you are dealing with small number of huge sized images. Another problem with storing images in db is that, metadata like creation, modification dates must handled by your application.
I have recently created a PHP/MySQL app which stores PDFs/Word files in a MySQL table (as big as 40MB per file so far).
Pros:
Uploaded files are replicated to backup server along with everything else, no separate backup strategy is needed (peace of mind).
Setting up the web server is slightly simpler because I don't need to have an uploads/ folder and tell all my applications where it is.
I get to use transactions for edits to improve data integrity - I don't have to worry about orphaned and missing files
Cons:
mysqldump now takes a looooong time because there is 500MB of file data in one of the tables.
Overall not very memory/cpu efficient when compared to filesystem
I'd call my implementation a success, it takes care of backup requirements and simplifies the layout of the project. The performance is fine for the 20-30 people who use the app.
Im my experience I had to manage both situations: images stored in database and images on the file system with path stored in db.
The first solution, images in database, is somewhat "cleaner" as your data access layer will have to deal only with database objects; but this is good only when you have to deal with low numbers.
Obviously database access performance when you deal with binary large objects is degrading, and the database dimensions will grow a lot, causing again performance loss... and normally database space is much more expensive than file system space.
On the other hand having large binary objects stored in file system will cause you to have backup plans that have to consider both database and file system, and this can be an issue for some systems.
Another reason to go for file system is when you have to share your images data (or sounds, video, whatever) with third party access: in this days I'm developing a web app that uses images that have to be accessed from "outside" my web farm in such a way that a database access to retrieve binary data is simply impossible. So sometimes there are also design considerations that will drive you to a choice.
Consider also, when making this choice, if you have to deal with permission and authentication when accessing binary objects: these requisites normally can be solved in an easier way when data are stored in db.
I once worked on an image processing application. We stored the uploaded images in a directory that was something like /images/[today's date]/[id number]. But we also extracted the metadata (exif data) from the images and stored that in the database, along with a timestamp and such.
In a previous project i stored images on the filesystem, and that caused a lot of headaches with backups, replication, and the filesystem getting out of sync with the database.
In my latest project i'm storing images in the database, and caching them on the filesystem, and it works really well. I've had no problems so far.
Second the recommendation on file paths. I've worked on a couple of projects that needed to manage large-ish asset collections, and any attempts to store things directly in the DB resulted in pain and frustration long-term.
The only real "pro" I can think of regarding storing them in the DB is the potential for easy of individual image assets. If there are no file paths to use, and all images are streamed straight out of the DB, there's no danger of a user finding files they shouldn't have access to.
That seems like it would be better solved with an intermediary script pulling data from a web-inaccessible file store, though. So the DB storage isn't REALLY necessary.
The word on the street is that unless you are a database vendor trying to prove that your database can do it (like, let's say Microsoft boasting about Terraserver storing a bajillion images in SQL Server) it's not a very good idea. When the alternative - storing images on file servers and paths in the database is so much easier, why bother? Blob fields are kind of like the off-road capabilities of SUVs - most people don't use them, those who do usually get in trouble, and then there are those who do, but only for the fun of it.
Storing an image in the database still means that the image data ends up somewhere in the file system but obscured so that you cannot access it directly.
+ves:
database integrity
its easy to manage since you don't have to worry about keeping the filesystem in sync when an image is added or deleted
-ves:
performance penalty -- a database lookup is usually slower that a filesystem lookup
you cannot edit the image directly (crop, resize)
Both methods are common and practiced. Have a look at the advantages and disadvantages. Either way, you'll have to think about how to overcome the disadvantages. Storing in database usually means tweaking database parameters and implement some kind of caching. Using filesystem requires you to find some way of keeping filesystem+database in sync.
I've only recently started to deal with database systems.
I'm developing an ios app that will have a local database (sqlite) and that will have to periodically update the internal database with the contents of a database stored in a webserver (mySQL). My questions is, whats the best way to fetch the data from the webserver and store it in the local database? There are some options that came to me, don't know if all of them are possible
Webserver->XML/JSON->Send it->Locally convert and store in local database
Webserver->backupFile->Send it->Feed it to the SQLite db
Are there any other options? Which one is better in terms of amount of data taken?
Thank you
The XML/JSON route is by far the simplest while providing sufficient flexibility to handle updates to the database schema/older versions of the app accessing your web service.
In terms of the second option you mention, there are two approaches - either use an SQL statement dump, or a CSV dump. However:
The "default" (i.e.: mysqldump generated) backup files won't import into SQLite without substantial massaging.
Using a CSV extract/import will mean you have considerably less flexibility in terms of schema changes, etc. so it's probably not a sensible approach if the data format is ever likely to change.
As such, I'd recommend sticking with the tried and tested XML/JSON approach.
In terms of the amount of data transmitted, JSON may be smaller than the equivalent XML, but it really depends on the variable/element names used, etc. (See the existing How does JSON compare to XML in terms of file size and serialisation/deserialisation time? question for more information on this.)
This question already has answers here:
Closed 11 years ago.
Possible Duplicate:
Storing Images in DB - Yea or Nay?
Images in database vs file system
I've been developing a web application using RIA technologies (Flex + PHP + MySQL + Ajax) and now I'm in a dilemma about image files.
I use some images in my Flex app, so I think "it could be awesome if I store them into database, and then retrieve from it; consecuently, maintain process should be more easy". But, here is my dilemma:
Should I store the physical URL of my images, or is going to be better if I store directly the image?
For example, should my Cars table looks like:
ID (autonumeric) | Source (text)
or like this?
ID (autonumeric) | Image (longblob or blob)
I know that here are cool people that can answer me this question, explaining me which is better and why :)
I personally recommend to Store Images in the database. Of course it both advantages and disadvantages.
Advantages of storing BLOB data in the database:
It is easier to keep the BLOB data synchronized with the remaining items in the row.
BLOB data is backed up with the database. Having a single storage system can ease administration.
BLOB data can be accessed through XML support in MySQL, which can return a base 64–encoded representation of the data in the XML stream.
MySQL Full Text Search (FTS) operations can be performed against columns that contain fixed or variable-length character (including Unicode) data. You can also perform FTS operations against formatted text-based data contained within image fields—for example, Microsoft Word or Microsoft Excel documents.
Disadvantages of Storing BLOB Data in the Database:
Carefully consider what resources might be better stored on the file system rather than in a database. Good examples are images that are typically referenced via HTTP HREF. This is because:
Retrieving an image from a database incurs significant overhead compared to using the file system.
Disk storage on database SANs is typically more expensive than storage on disks used in Web server farms.
As a general rule you wan't to keep your databases small, so they perform better (and backup better too). So if you can store only a filesystem reference (path + filename) or URL in the DB, that would be better.
Its probably a question of personal preference.
As a general rule its better to keep the database small. However when you come to enterprise applications they regulary add the images directly to the database. If you place them on the file system the db and your file system can get out of sync.
Larger CMS will regulary place those files in the db. However be aware that this requires a larger DB sizing when everything is growing...
When you are saving the url and name only, be sure that these won't change in the future.
With files stored in the database you can implement security easier and you don't have to worry about duplicate filenames.
I used to store the path into the URL, but then adding an additional web server to the mix proved less than ideal. For one thing, you'll have to share the path to where the images are stored. We were using NFS and it became slow after a while. We tried syncing the files from one web server to another but the process became cumbersome.
Having said that, I would store them in the DB. I've since moved all my image/file storage over to MongoDB. I know this doesn't satisfy your needs but we've tried it all (even S3) and we weren't happy with the other solutions. If we had to, I would definite throw them inside MySQL.
Personally, I've always stored the URL.
There's no real reason not to store the image directly in the database, but there are benefits to not storing it in the database.
You get more flexibility when you don't store the image in the database. You can easily move it around and just update the URL in the file. So, if you wanted to move the image from your webserver to a service such as Flickr or Amazon Web Services, it would just be as easy as updating the link to the new files. That also gives you easy access to content delivery networks so that the images are delivered to end users quicker.
I'd store the url, it's less data and that means a smaller database and faster data fetching from it ;)
I am struggling to decide if I should be using the MySQL blob field type in an upcoming project I have.
My basic requirements are, there will be certain database records that can be viewed and have multiple files uploaded and "attached" to those records. Seeing said records can be limited to certain people on a case by case basis. Any type of file can be uploaded with virtually no restriction.
So looking at it one way, if I go the MySQL route, I don't have to worry about virus's creeping up or random php files getting uploaded and somehow executed. I also have a much easier path for permissioning and keeping data tied close to a record.
The other obvious route is storing the data in a specific folder structure outside of the webroot. in this case I'd have to come up with a special naming convention for folders/files to keep track of what they reference inside the database.
Is there a performance hit with using MySQL blob field type? I'm concerned about choosing a solution that will hinder future growth of the website as well as choosing a solution that wont be easy to maintain.
Is there a performance hit with using MySQL blob field type?
Not inherently, but if you have big BLOBs clogging up your tables and memory cache that will certainly result in a performance hit.
The other obvious route is storing the data in a specific folder structure outside of the webroot. in this case I'd have to come up with a special naming convention for folders/files to keep track of what they reference inside the database.
Yes, this is a common approach. You'd usually do something like have folders named after each table they're associated with, containing filenames based only on the primary key (ideally a integer; certainly never anything user-submitted).
Is this a better idea? It depends. There are deployment-simplicity advantages to having only a single data store, and not having to worry about giving the web user write access to anything. Also if there might be multiple copies of the app running (eg active-active load balancing) then you need to synchronise the storage, which is much easier with a database than it is with a filesystem.
If you do use the filesystem rather than a blob, the question is then, do you get the web server to serve it by pointing an Alias at the folder?
+ is super fast
+ caches well
- extra server config: virtual directory; needs appropriate file extension to return desired Content-Type
- extra server config: need to add Content-Disposition: attachment/X-Content-Type-Options headers to stop IE sniffing for HTML as part of anti-XSS measures
or do you serve the file manually by having a server-side script spit it out, as you would have to serving from a MySQL blob?
- is potentially slow
- needs a fair bit of manual If-Modified-Since and ETag handling to cache properly
+ can use application's own access control methods
+ easy to add correct Content-Type and Content-Disposition headers from the serving script
This is a trade-off there's not one globally-accepted answer for.
If your web server will be serving these uploaded files over the web, the performance will almost certainly be better if they are stored on the filesystem. The web server will then be able to apply HTTP caching hints such as Last-Modified and ETag which will help performance for users accessing the same file multiple times. Additionally, the web server will automatically set the correct Content-Type for the file when serving. If you store blobs in the database, you'll end up implementing the above mentioned features and more when you should be getting them for free from your web server.
Additionally, pulling large blob data out of your database may end up being a performance bottleneck on your database. Also, your database backups will probabaly be slower because they'll be backing up more data. If you're doing ad-hoc queries during development, it'll be inconvenient seeing large blobs in result sets for select statements. If you want to simply inspect an uploaded file, it will be inconvenient and roundabout to do so because it'll be awkwardly stored in a database column.
I would stick with the common practice of storing the files on the filesystem and the path to the file in the database.
In my experience storing a BLOB in MySQL is OK, as long you store only the blob in one table, while other fields are in another (joined) table. Conversely, searching in the fields of a table with a few standard fields and one blob field with 100 MB of data can slow queries dramatically.
I had to change the data layer of a mailing app for this issue where emails were stored with content in the same table as date sent, email addresses, etc. It was taking 9 secs to search 10000 emails. Now it takes what it should take ;-)
Data should be stored in one consistent place: the database.
This performance and Content-Type thing is not an issue at all, because there is nothing stopping you from caching those BLOB fields to the local web server and serving it from there as it is requested for the first time. You do not need to access that table on every page view.
This file system cache can be emptied out at any moment, which will only impact performance temporarily as it is being refilled automagically. It will also enable you to use one database and many web servers as your application grows, they will simply all have a local cache on the file system.
Many people recommend against storing file attachments (usually this applies to images) in blobs in the database. Instead they prefer to store a pathname as a string in the database, and store the file somewhere safe on the filesystem. There are some merits to this:
Database and database backups are smaller.
It's easier to edit files on the filesystem if you need to work with them ad hoc.
Filesystems are good at storing files. Databases are good at storing tuples. Let each one do what it's good at.
There are counter-arguments too, that support putting attachments in a blob:
Deleting a row in a database automatically deletes the associated attachment.
Rollback and transaction isolation work as expected when data is in a row, but not when some part of the data is on the filesystem.
Backups are simpler if all data is in the database. No need to worry about making consistent backups of data that's changing concurrently during the backup procedure.
So the best solution depends on how you're going to be using the data in your application. There's no one-size-fits-all answer.
I know you tagged your question with MySQL, but if folks reading this question use other brands of RDBMS, they might want to look into BFILE when using Oracle, or FILESTREAM when using Microsoft SQL Server 2008. These give you the ability store files outside the database but access them like they're part of a row in a database table (more or less).
Large volumes of data will eventually take their toll on performance. MS SQL 2008 has a specialized way of storing binary data in the file system:
http://msdn.microsoft.com/en-us/library/cc949109.aspx
I would employ the similar approach too for your project too.
You can create a FILES table that will keep information about files such as original names for example. To safely store files on the disk rename them using for example GUIDs. Store new file names in your FILES table and when user needs to download it you can easily locate it on disk and stream it to user.
In my opinion storing files in database is bad idea. What you can store there is id, name, type, possibly md5 hash of file, and date inserted. Files can be uploaded in to folder outside public location. Also you should be concern that it is not advised to keep more than 1000 files in one folder. So what you have to create new folder each time file id is increased by 1000.