I've installed recent Qt (4.5.3) sdk windows version. I'm want to use mysql in my app. Since Qt Mysql plugin in not available, so I compiled it from the included source. I copied compiled files D:\\Qt\2009.01\qt\plugins\sqldrivers.
Now when I run my application it still error "QMYSQL driver not loaded".
I suggest you take the whole Qt4 source code and compile it specifically for your own needs.
Something like this should do the job just fine:
Download the Qt source code from qt.nokia.com
Extract it somehwere and open a command prompt.
"cd" into the source directory and run "configure":
Just an example:
/Devel/qt/configure
-release
-fast
-opensource
-nomake "demos examples"
-silent
-qt-sql-mysql
You might have to additionally provide -I C:\path\to\mysql\includes and -L C:\path\to\mysql\libs.
After that, do "make install".
Hope that helps.
There may be several reasons leading to the driver not being loaded, I experienced several of them in my Qt experience.
Qt provides good documentation on this point, I suggest you have a look at the Troubleshooting subsection of Qt Assistant's SQL Database drivers section, it should help you diagnose your problem. It worked for me.
Hope that helps.
After compiling the plugin, you need to add the MySQL bin path to your PATH environment variable.
Related
I have TeXmacs and Octave installed, both working properly otherwise. I have also added the path to octave executable (i.e. C:\Octave\Octave-5.1.0.0\mingw64\bin) to the Windows environment variables and octave runs in cmd/PowerShell terminals and Jupyter with no hassle. However, when running Octave inside TeXmacs through Toolbar > insert > session > octave it gets stuck on Busy..., the same reaction for any other commands as well:
Octave gets stuk on Busy... inside TeXmacs.
This is my environment:
TeXmacs 1.99.9
Octave 5.1.0 (installed through Chocolatey)
Windows 10 version 1809
I would appreciate if you could help me know what is the problem and how I can solve it.
P.S. I have reported this issue in the TeXmacs repo.
#Foad. I wrote an updated Octave plugin for Texmacs. I tried it on Windows, OSX and Linux, works on the systems I have access to. If you are interested to test it, you can download the zipped archive from here https://lists.gnu.org/archive/html/texmacs-dev/2019-12/msg00005.html.
To install it, unzip the archive and copy the octaveX directory in the application plugins folder, alongside all the plugins that come with the standard Texmacs installation. Won’t work if installed in ~/.Texmacs/plugins. If everything goes fine, you should find a new Insert/Session/OctaveX menu (note: I changed the session name). If not, try to refresh the plugin system with the menu Tools/Update/Plugins. If you try it, please let me know, especially if you find troubles. In case I will do my best to fix them.
A fundamental prerequisite is a working octave-cli command in a operating system shell. Should be standard on Linux, may require some additional setup on Windows (environmental variables) or OSX (.bash_profile). You can find some help and more details under the menu Help/Plug-ins/OctaveX.
Concerning the error you found, as far I understand there are some issues with the standard distributed plugin: first, a .octaverc file is missing, so several variables are not initialized, in addition the Windows version calls a not existent file. Moreover the plotting functions are quite old and are not compatibile with Octave newer than version 2 (or maybe 3, anyway a quite old version).
You could try to run the command in
%TEXMACS_PATH%/plugins/octave/bin/tm_octave.bat
from the terminal to see what happens. There is a problem with this plugin and it does not work also on Mac but I do not know enough Octave to fix it. Somehow it does not manage to find the files which are in
%TEXMACS_PATH%/plugins/octave/octave
Please try to modify tm-start.m to look like
d=getenv("TEXMACS_PATH");
if (length(d) > 0)
addpath("tm:polynomial:plot")
tmrepl
endif
In windows, octave should be run using the scripts octave.bat (in the mingw64\bin directory of the octave install) or octave.vbs (in the install directory) for the GUI
You should not run octave.exe directly.
For 2 weeks I'm looking for a proper tutorial on how to fully install the library "lib_mysqludf_sys".
I got the .dll from a Russian site, because there seems to be no other for 64bit systems. I have successfully installed the procedure and also created the function, but whenever I want to call a file the whole database crashes. I conclude that the DLL file is faulty or that I forgot something to install.
can someone please explain to me how to use the UDF library to call files on a Windows Server 2016 64bit properly implied in the MySQL?
that would help me a lot, thank you!
Download the Windows 64 bit version from here:
https://github.com/rapid7/metasploit-framework/tree/master/data/exploits/mysql
Copy it to here or equivalent for your MySQL installation:
c:\Program Files\MySQL\MySQL Server 5.7\lib\plugin\lib_mysqludf_sys_64.dll
Install and verify as per the instructions here:
https://osandamalith.com/2018/02/11/mysql-udf-exploitation/
Looks like you are using MySQL 57/earlier version. For the library, I suggest to control it with "dependency walker". See if there is any problem with dependency libraries. At lease KERNEL32.DLL and MSCVTR.DLL (Visual C++ Redistrubatable file) should be there without any warning on root level.
If you have the code, I suggest you to recompile it with mygwin64. There are many items needs to be fixed to compiled it. Following link is a good link for UDF DLL compiles
https://github.com/esabilbulbul/mysql-udf-windows
There something similar, follow my answer here
stackoverflow.com/a/65209718/10026099
I installed monodevelop in ubuntu 13.04 from git with the help of README.md, but I received an error
checking for LIBVALA... no
configure: error: Package requirements (libvala-0.12 >= 0.12) were not met:
No package 'libvala-0.12' found
Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.
Alternatively, you may set the environment variables LIBVALA_CFLAGS
and LIBVALA_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.
I have installed libvala-0.20-0 and libvala-0.20-dev by apt-get.
I have googled for this question and found some links,but helpless.
my mono was at version 3.6.1.
THX FOR HELP.
update 2014-06-19
I found the config.log file and see the error
configure:4075: checking for LIBVALA
configure:4084: $PKG_CONFIG --exists --print-errors "libvala-0.12 >= $LIBVALA_REQUIRED_VERSION"
Package libvala-0.12 was not found in the pkg-config search path.
Perhaps you should add the directory containing `libvala-0.12.pc'
to the PKG_CONFIG_PATH environment variable
Although I have installed libvala-0.20-0 and libvala-0.20-dev, I doesn't own a libvala-0.**.pc file.
What can I do the next?
I have resolved thest problem by finding a libvala-0.12.pc file :)
While the Vala language, valac, and most of the bindings distributed with Vala are meant to be API stable, libvala is not. libvala-0.20 provides a very different API/ABI from libvala-0.12, and apparently MonoDevelop's Vala plugin hasn't been updated since Vala 0.12.
If you don't want the Vala plugin, I'm sure MonoDevelop provides a way to disable it (probably passing --disable-vala or something similar to ./configure). If you need the Vala plugin, though, you'll have to install libvala-0.12 or update the plugin to use a newer version of libvala.
now the problem is solved.
I used cn.archive.ubuntu.com/ubuntu for my apt-get.
These's no libvala-**.pc file in the package.
So whatever version I installed by apt-get, I can not get a libvala-*.pc file.
I searched in google for libvala-12.0.pc and changed my source to cz.archive.ubuntu.com/ubuntu, then I got that file.
Now I can run my monodevelop with valabinding.
Thx for #nemequ , I didn't use a higher libvala, so I don't know if it will be different when using a libvala-hight-than-12.0.pc file.
Hope these is usefull for others.
If you don't want to install vavabind after configure once ,just use ./configure --select, it's written in README. My bad :(
I knew this day would come, so I guess it is here. (P.S. I am on windows XP).
I am trying to use this program here. I installed it fine, but it doesnt seem to work when I type in equations. So I went back to the site and it says I need JRE version 5.0 or above, (check). Then it also says I need dvipng, which I dont think I have.
So I went to the site it tells me to, (here), and I downloaded the most recent one, "dvipng-1.14.tar.gz". I unzipped it and I have it all sitting in one directory.
Ok... now what?
Im afraid I need guidance on exactly how to proceed here. The readme and installation instructions say to run "./configure", then "make", etc, I opened the command prompt and did all that but doesnt recognize. I have never had to build in this way, I always used an IDE for compiling C++ programs that I write myself. (Anyway, why am I even having to make an exe why dont they just make one and let us download that?)
Very confused as to what I need to do here, appreciate some step by step help.
Thank you
Even though Mohammad's problem was solved in the comments, I'll have a go at answering his question:
To run a build system that uses ./configure, you need something that can run shell scripts, as well as the usual suite of unix tools that the script expects, plus a compiler that behaves in the standard sort of way.
The two projects that I know of that do this are cygwin and MSYS. cygwin is aimed at creating a full POSIX environment on windows, while MSYS is an add-on to MinGW that aims to provide just the parts needed to run a ./configure script and build a program.
I compiled MySQL++ with no issues. When I launched some of the executables (resetdb.exe and simple1.exe) they suggest to run to test if the installation has been successful, the first error I got was that libmysql.dll was missing.
Adding its path to the PATH environment variable did not fix the problem, even after launching a new command prompt; I had to copy the DLL in the directory where MySQL++ executables are.
Now the DLL is found, but I get this error:
simple1.exe - Application error
The application was unable to start correctly (0xc000007b).
Click OK to close the application.
even launching from the command line, I get no more information than these.
Thank you for any help!
MySQL 5.5 -
MySQL++ 3.0.9 -
Windows 7 64 bits -
MINGW32 -
GCC 4.4.0
0xC000007B is a Windows error that means the executable is corrupted. It could refer either to simple1.exe or to one of the DLLs it's linking against.
Some reasons this could happen:
You're mixing toolchains in an incompatible way. In your case, you may have built simple1.exe using pieces built by MinGW GCC and pieces built by Visual C++. MinGW should be compatible with any pure C DLL built by Visual C++, including the MySQL C API DLL. However, you may have other pieces interfering. MinGW isn't compatible with VC++ at the C++ level, but then, it shouldn't have linked at all if this were your problem.
You didn't follow the MySQL C API import library build steps in README-MinGW.txt. You either missed a step, or skipped it entirely and are trying to use the import library that shipped with MySQL.
In your previous gyrations, you ended up with a corrupt object file, which got linked in. Try saying make clean all at the top level of MySQL++ to force a complete rebuild.
You're mixing versions of MySQL or MySQL++. If you have more than one version of each on the system, make sure you're consistent in their use. That is, build the C API import library from the same DLL you run the programs against, use exrun.bat to run the examples to ensure you're using the just-built version of the MySQL++ DLL instead of another you have in your PATH, etc.
Additionally, I note that you're using an older version of MySQL++. If you were on Linux, I could understand that as some distributions still ship with 3.0.9. But since you have to build MySQL++ from source with MinGW, I don't see why you're not using 3.1.0. Did you get a binary build from somewhere?
As for your PATH problem, did you restart the MinGW shell after doing this? PATH updates don't affect running programs; they keep the value they saw when they started.