I am moving from SQL 2000 to SQL 2008. The SQL 2000 is on a Server 2003. SQL 2008 is on a Server 2008. I have imported my database successfully. I am able to perform queries and they work fine. I use a VB6 program running in the IDE to update the database.
When my VB6 program runs on a server 2003 the program will connect using the following connection string:
Provider=SQLOLEDB;DATABASE=mydbname;SERVER=my ip;DRIVER={SQL SERVER};UID=myuser;PWD=mypw;
Using the above connection string, I can connect with no errors to either SQL 2000 or the new SQL 2008 database. On the Server 2008, there is no SQLOLEDB driver show, so I have to use the new SQLNCLI10 provider
CCTdbConnectionString = "Provider=SQLNCLI10;Server=myServer\My InstanceName;Database=MyDB;UID=myuser;PWD=mypw;
Here's the problem. When I am running on the Server 2008 I get the error 3228 Selected collating sequence not supported by the operating system. If I hit debug and try again, or stop the program and try again it gets past that error until I reopen the IDE. Then I get a 2nd error encountered is an error 3027 Can Not Update. Database or object is read-only! This never goes away and I'm dead.
After Much research, I have found the answer. SQL 2005 and up apparently require a Unique Key Index exist on every single table that is accessed using ODBC or OLEDB.
This Cures the problem.
Compile the code: don't use the IDE?
Related KS KB article 246167
Related
I'm trying to replicate a Linked Server from a Windows 2k3 / SQL Server 2000 to a Windows 2008 / SQL 2008 R2 setup.
The SQL 2000 Linked server is setup like this:
srvname=blah.blah.com
srvproduct=SQL Server
providername=SQLOLEDB
datasource=blah.blah.com
srvnetname=blah.blah.com
rpc=1
rpcout=1
dataaccess=1
The SQL 2008 R2 Linked Server is setup the same way.
I've copied the remote users, and all seems fine, except when i tried to connect, I get this error:
OLE DB provider "SQLNCLI10" for linked server "blah.blah.com" returned message "Client unable to establish connection". (Microsoft SQL Server, Error: 20)
Encryption not supported on SQL Server
I still have access to the SQL 2000 machine, and can run the query fine. I'm guessing the issue is that Windows2008 machine is trying to send data encrypted, but the linked server is saying it can't handle encryption. Something along those lines. I've played with various different Data Source types, and nothing seems to pan out. I don't have access to the remote server so I don't know what OS/Database is on it.
Anyone with more SQL knowledge than me can point me in the right direction?
Thanks!
Hooray! I've done it. For anyone that may find this issue in the future, this is what I did:
Create ODBC connection to SOMESERVER.COM, call it dsnSOME
Driver: SQL Server
Name: dsnSOM
Server: SOMESERVER.COM
Create a Linked Server to dsnSOM:
Linked server: "SOMESERVER" (I don't think it matters)
Provider: Microsoft OLE DB Provider for ODBC Drivers
Product Name: dsnSOME
Data source: dsnSOME
And that's it. Now when I call the stored procedure I call:
[SOMESERVER].database.owner.storedprocedure
And it works!
It seems that for whatever reason, when trying to run a stored procedure on SQL 64 bit to a SQL 32 bit linked server directly, it gives this weird message about Encryption. However going through the ODBC and it works great.
I just installed SQL Server 2012 to test differences and make sure it is ok for my Work. I may not be a pro at SQL, but I don't see how to add a Link to Jet database on my server. I have imported Jet Databases, but when going thru the GUI to Link a JET Database I see no Provider for JET. I am running Access 2003 (I don't like the 2008+ GUI)
I searched an found nothing simular to my issue; at least nothing I understood. Nothing mentioned how to add Jet db Provider.
I ran a connection string to the Jet Database thru QA:
sp_addlinkedserver 'USGEScrub', 'Access', 'Microsoft.Jet.OLEDB.4.0',
'D:\Lead$\SupList\USGEScrub.mdb'
The connection string works till I try to access the data and then I get this the errorand of course if I click the links nothing shows up:
TITLE: Microsoft SQL Server Management Studio
Failed to retrieve data for this request. (Microsoft.SqlServer.Management.Sdk.Sfc)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&LinkId=20476
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch.
Cannot create an instance of OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked
server "USGEScrub". (Microsoft SQL Server, Error: 7302)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&ProdVer=11.00.2100&EvtSrc=MSSQLServer&EvtID=7302&LinkId=20476
download the 2010 Access database engine from Microsoft
Allow "InProcess"
Add linked server using the ACE OLEDB provider.
more details here
I had a similar problem and in my case it turned out to be related to the permissions on the %TEMP% folder for the account under which the SQL Server service was running. For more details see my answer here.
Sometimes this problems occurs in computers x64 with office x84 versions installed. Try this:
Install pasive OleDb Driver x64
We moved an old installation to a new hosting partner and now we're getting intermittent (now and then, days apart) "socket write errors" on a jdbc connection from an apache (6.0.20) to an SQL Server 2008 R2 (running on another host). We're using the current jTDS (1.2.5) jdbc drivers. The problems did not occur before the move.
An MS SQL Server specialist suggests the problems might be related to us running jTDS with MS Server 2008 R2.
Q: Can anybody support (or disprove) the theory that our problems are related to us using jTDS (and that we would be better off using MS JDBC drivers)?
There are a number of reasons this could happen depending on what your application is doing:
The SQL Server instance may have been stopped
The connection has timed out
In the case of binary data, the stream is reset.
Are there any free solutions for automatically migrating a database from MySQL to SQL Server Server that "just works"?
I've been attempting this simple (at least I thought so) task all day now. I've tried:
SQL Server Management Studio's Import Data feature
Create an empty database
Tasks -> Import Data...
.NET Framework Data Provider for Odbc
Valid DSN (verified it connects)
Copy data from one or more tables or views
Check 1 VERY simple table
Click Preview
Get Error:
The preview data could not be
retrieved. ADDITIONAL INFORMATION:
ERROR [42000] [MySQL][ODBC 5.1
Driver][mysqld-5.1.45-community]You
have an error in your SQL syntax;
check the manual that corresponds to
your MySQL server version for the
right syntax to use near
'"table_name"' at line 1 (myodbc5.dll)
A similar error occurs if I go through the rest of the wizard and perform the operation. The failed step is "Setting Source Connection" the error refers to retrieving column information and then lists the above error. It can retrieve column information just fine when I modify column mappings so I really don't know what the issue is.
I've also tried getting various MySql tools to output ddl statements that SQL Server understand but haven't succeeded.
I've tried with MySQL v5.1.11 to SQL Server 2005 and with MySQL v5.1.45 to SQL Server 2008 (with ODBC drivers 3.51.27.00 and 5.01.06.00 respectively)
There are two free toolkits provided by Microsoft.
Microsoft SQL Server Migration Assistant for MySQL v1.0
http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=14280
Microsoft SQL Server Migration Assistant for MySQL v5.1
http://www.microsoft.com/download/en/details.aspx?id=26712
I have used only the second one and it worked for me without any glitch.
It required registration with Microsoft for downloading a license file.
But it is free to use for everyone.
This is really old now, but if you use MySQL Connector NET and set SQL Server Mode = true in the connection string, this will resolve your error.
Recently, I have successfully migrated the MySQL database to MSSQL database. Below are detailed steps:
Operating System: AWS Microsoft Windows Server 2012 R2 with SQL Server Standard
Tools Used:
SQL Server 2014 Management Studio SQL Developer,
Microsoft SQL Server Migration Assistant v6.0.1 for MySQL,
Remote Desktop Client, and
Third Party MySql ODBC Driver 5.1.13
1. Setup AWS Windows Server
2. From the AWS console ec2 instance list, right click on the windows server and select connect. You would see the similar screen below.
3. Click on the Get Password button which will be required for Remote Desktop connection[#4] and follow the instructions.
4. Connect to that EC2[#1] instance with the Remote Desktop Client by default available in your Ubuntu local machine. Use the credentials from #2.
5. Once you get connected using the remote client, you should be able to access the remote MSSQL server. Install the following tools.
Install Chrome : Since internet explorer has some security, install chrome.
Install Microsoft SQL Server Migration Assistant v6.0.1 for MySQL
https://www.microsoft.com/en-us/download/details.aspx?id=51218
Install Third Party MySql ODBC Driver 5.1.13
https://dev.mysql.com/downloads/connector/odbc/5.1.html
6. Configure ODBC Data Sources(64-bit) :
Open Administrative tools → click on ODBC Data Sources(64-bit) and
follow the steps to connect to MySQL database.
7. Open SQL Server 2014 Management Studio SQL Developer and connect using windows authentication.
Create destination MSSql database for MySql migration.
8. Open Microsoft SQL Server Migration Assistant : For detail visit this link: https://blogs.msdn.microsoft.com/ssma/2011/02/07/mysql-to-sql-server-migration-how-to-use-ssma/
Create new project
Connect to MySql
Connect to MSSql
Convert Schema
Migrate Data
8. You might have some problem listed here. Please read in detail where I have written the detail resolution.
MySql 5.6 to MSSql server 2014 migration : ExecuteReader requires an open and available Connection
I am afraid there is no simple solution. SQL used in MySQL and T-SQL used in SQL Server 200X are different dialects of SQL. It is not only simple changing say "auto_increment" to "identity", but reserved words that creates a problem.
For example
CREATE TABLE test (
user varchar(50)
)
will work in MySQL and fail in SQL Server 2008.
To cut long story short - unfortunately, you will need to do it by hand.
Export the file from MySQL to a CSV file.
Export the create statements for the tables from MySQL
Cry.
3a. Disable foreign key checks in SQL server
Tune the create statements in SQLserver until they work.
Import the CSV files in to MySQL.
5a. Enable foreign key checks in SQL server.
Also see these answers:
migrate-from-mysql-to-sql-server-2008
Had similiar issue about this error 42000, and for me I figured out that setting the MySQL global mode to ansi_quotes would solve it:
set global sql_mode=ansi_quotes;
There are commercial solutions, but not free solutions. Depending on complexity of your database, rewriting SQL for target dialect can be trivial task - or a very hard one.
Rewriting CREATE TABLE statements is never hard, it can be done by hand with no surprises. Procedures, functions and triggers are problematic.
I've been put in charge of migrating a customer's website of MS SQL/ASP to PHP/MYSQL. I have zero experience with MS SQL.
I'm trying to figure out the best way to get the current data migrated to MySQL so I can begin PHP development.
Some details:
I downloaded SQL Server Mangement Studio Express. I found the following string in a connection file:
MM_connCompanyName_STRING = "provider=SQLOLEDB;data source=IP_ADDRESS;database=DATABASENAME;uid=USERNAMEpwd=PASSWORD;"
Using the IP, username, and password from this string, I could successfully connect using Studio Express.
I downloaded the MySQL Migration Toolkit and entered the same info, but get the following error:
Connecting to source database and retrieve schemata names.
Initializing JDBC driver ...
Driver class MS SQL JDBC Driver
Opening connection ...
Connection jdbc:jtds:sqlserver://IP_ADDRESS:1433/DATABASENAME;user=USERNAME;password=PASSWORD;";charset=utf-8;domain=
The list of schema names could not be retrieved (error: 0).
ReverseEngineeringMssql.getSchemata :Login failed for user 'USERNAME'.
I don't have admin or physical access to the current SQL server. I've tried to run some exports through Studio Express, but it saves them to the file system, which I don't have access to.
I can reach the current/old webmaster, but because he no longer works for the company, his responses are slow and usually un-helpful. So no help there...
The former admin sent me an MDF file ... no idea what to do with that.
I found this note above the connection info on the current server (if it means anything):
'this connection is being used because
ODBC was causing weird errors,
switching to OLEDB fixed them
My questions:
Any idea why this would be failing with the same login credentials that works with Studio Express? I'm assuming it has something to do with the driver, but I don't know what next steps to take.
Is there a better/easier/more effective way to migrate this data? (I'm hoping I don't find myself running "SELECT *" statements in Studio Express and copy/pasting data into Excel...please god, no)
Thanks in advance for your help.
Eww, this is going to be scary (connection string indicates it was tool generated from Dreamweaver, never a good sign).
Any idea which version of SQL Server? You should be able to SELECT ##VERSION. 10.x is 2008, 9.x is 2005 and 8.x is 2000. If it is 7.x run.
The MDF file is the actual database. If I were you, I would buy a developer edition of SQL 2005 (or 8 if it is 2008 which is unlikely), it will be worth the $99 or so it costs.
This will give you the ability to locally install the DB by ATTACHing the MDF file. Once you have a locally running copy, you can use the SQL Server ETL tools with the MySql ODBC drivers to push the data to MySql in a repeatable manner.
I believe you can export data from MSSQL choosing different SQL dialects; I believe there's one that's reasonably MySQL compatible. It doesn't solve all your problems, of course, because while you may get the structure properly, stored procedures and triggers and the like will take a bit more work. But that should get you started.