Is there a way to make items right aligned, say with the page or with some other item in a report, using reporting services 2008 ? Right now, I'm sort of emulating this behaviour by
shifting items to the right manually so that they look right aligned, however, when there's an item with a dynamic width (e.g. a tablix with data ir the horizontal direction), obviously, this approach fails. What is the correct way to do this ?
Unfortunately their is no horizontal align property available in the RDL spec (there is vertical align and text align), so there is no best way to do it.
You can employ some tricks to get the visual effects closer or perfect (textboxes work perfectly, tablix's are tougher and depend on a number of their settings):
- Place the right edge where you want it and drag the left edge to the maximum size you want to cater for, set the text align property to right, Set CanGrow to false (on a tablix you need to do this on the columns itself, where on textbox it is available directly): What this will do is allow for the text to appear right aligned correctly with growth handled and no export issues.
- Another trick is to place your elements in a rectangle which can help constrain it.
These options will work fine with dynamically generated RDL's, or setting in BIDS or Report Builder, as should all options, as it is the RDL which is the limiting factor not the tool/method which creates it.
Place the header and footer text-boxes on the right side of the report area away from sub-report alignment to bring them on RIGHT side in sub-report.
Related
So I'm currently creating a report and whenever I render the report on CRM Dynamics it's adding a ton of whitespace to the right of every field like this:
Bunch of white space
What I've tried so far:
-Changing CanGrow to false (I'm aware that CanGrow only affects if it can grow vertically)
-Adding the table to a new report
-Setting ConsumeWhiteSpace to true
I've been looking for a way to make the table columns static but according to Microsoft's documentation, they should be static by default.
For reference here is how I want the report to look, this is the view I get when getting the preview in Visual Studios: What I want it to look like
Right click the grey space outside of your report and go to properties. Make sure your report is in portrait mode and set your margins. With default margins of 1" your page width should be under 6.5". Drag the border of your page to the left until it is LESS than 6.5" (so you can't see the .5" hash mark). If you adjust your margins to be smaller you can make it a bit wider but I don't recommend less than .5" margins.
I think what is happening is your page is so large the tables are stretching to with the empty space.
I am using SSRS (on top of SQL Server 2014). I am making a 3D horizontal stacked bar chart, but there are some display properties that I cannot figure out, despite all information available.
I Am wondering how/if the two measures in the chart above, a & b, can be set:
(a) The depth of the bar chart. Can I make this smaller? I want a much narrower bar.
(b) The offset of the chart from the axis. Is there a way to make the bar hug right up against the axis? Maybe I'm the only one, but when I look at the right extreme of the bar,I have trouble telling how close it falls to the 300 line due to this unnecessary offset.
Furthermore, does SSRS allow me to control things like the color rendering of the chart? Here is an example from another BI reporting tool:
This one has black outlines around all of the bars. Is SSRS capable of this? Mostly, I am just wondering if SSRS can make a chart that looks more like the latter.
The first two can be easily changed.
To set the bar width and border colour, click on one of the bars then hit F4 to bring up the properties pane.
In the properties, expand Custom Attributes and set the point width to something smaller, say 0.2 and set the border colour and style to your choosing.
Here's a screen-grab of the properties to give a nice garish red border and smaller bars.
To set the bars against the base, go to the horizontal (or vertical if you want to change this too) axis properties and set Side Margins to Disabled.
This gives this output...
I am having issues with blank pages turning up in pdfs/printing etc.
Reason seems to be the layout of my report.
I have a fixed width corporate header that fits the page. I then have a main report area with a dynamic number of columns grouped across the page.
The main report has a width of approx. 4" on the design screen, leaving a white space to the right of this of 6.5". I know that after the column groups expand out SSRS will try to render 6.5" of white space after it because that is the difference between my header (which I cannot change) and my main data area.
I understand the problem, and why it happens, that much is well documented. What I need to know if anyone has found a work around for this? I can't give management the answer "Sorry, that's the way it is."
Many thanks.
The reports ConsumeContainerWhiteSpace property
Gets or sets a value that indicates whether all whitespace in containers, such as Body and Rectangle, should be consumed when contents grow instead of preserving the minimum white space between the contents and the container.
This can be set by clicking the Report body, going to the properties (F4) and setting ConsumeContainerWhiteSpace to True
I am currently having the following Problem:
I have 2 SSRS Texboxes which I place right above a Matrix:
Now as you can see the Textboxes are fixed in a standalone Position, and are all alone without anything else around them,
but guess what happens as soon as I click to Preview my Report, this happens:
The Textboxes Fly out of the Report,
and I have done everything to get them in place, I have tried getting them a little to the left, but in the end, after I got to where it would stop jumping, I got them so much left that they were in a place that I couldn't have them in.
Has anybody using Reporting Services ever experienced this?
Does anyone have a solution? Are there some properties I need to change in order for the Textboxes to stop Jumping?
Great Question, GBerisha! Essentially, you want the horizontal distance between the Heading Textbox and the two rightmost Textboxes to be fixed. There are two ways to accomplish this. The first would be to create a Rectangle from the Toolbox Menu and place the Heading Textbox and the two rightmost Textboxes inside that Rectangle. That will keep the expanding Matrix from pushing out the two rightmost Textboxes as it expands. The other way would be to create a Table, delete the Detail Row, and place the three Textboxes in the Table Header.
I'm having trouble with some report items changing other items' positions when they are conditionally hidden.
I've been using Reporting Services 2000 for printing item price labels as PDFs, with the report consisting of a single table with a single cell for each item. The data fields and other items on the label are all placed inside a single rectangle. Because of the very specific layout required, some of the report items overlap in the designer in order to position correctly on the rendered PDF.
This has worked fine for several years, until we upgraded to SSRS 2008 and I had to migrate the report to the new version.
Now, suddenly, when certain items on the report are hidden (by an expression in the Hidden-property), certain other items shift their positions. In some cases, even the containing rectangle is resized.
After quite a bit of googling, I've come to the understanding that SSRS 2008 attempts to maintain the relative spacing between report items, so that if an item to the left of another one changes in size, the item to the right is adjusted accordingly.
Apparently, hiding an item equates to changing its size to zero, and so the item next to it is shifted left to fill the gap.
However, I do not want this behavior, since all items should stay in their predefined positions regardless of others.
So, does anyone know of a way to "fix" report item positions, so that they are not affected by hiding other items?
I've tried placing the items inside separate rectangles so as to group them, in the hope that only items inside the same rectangle can affect each other, but this does not seem to help.
Any ideas would be greatly appreciated.
In the side by side example, you can place the control that may be hidden into a rectangle big enough to hold both; but then put the other control that must stay in a fixed position BEHIND the rectangle (i.e. the parent of this control is the report rather than the rectangle).
If that's not enough, and the hidden and non-hidden items use the same dataset, you could (shudder) use a giant tablix control with a grouping of =1 and the right number of rows and columns to control the layout (because you can insert rectangles inside).
Some other tricks are to set the color/backgroundcolor properties to white (though in some rendering formats you can click and drag to highlight and still read what was there)... alternately you can go so far as to make the contents of controls all expression based, so as not to produce anything if a condition is met, and so it's basically invisible.
Another approach: create rectangles containing the fields you want to hide, then put a WHITE line across the entire bottom (or top) of the rectangle. This keeps the rectangle the same size even if the fields within it are hidden. A rectangle will shrink if the fields within it shrink, but the line spanning the entire rectangle prevents this from happening.
Not sure if this will help anyone else as it's a fairly specific requirement but it solved my variant of the OPs issue so here goes. I was designing an SSRS report to print labels (in my case the Avery 5164) and the users wanted to pick which labels on the sheet they would print because they may have already used one or two labels from a page. Because the positioning of the printed labels is important I needed them to stay in place even if the labels above them on the sheet were hidden. My solution was to create empty rectangles of the same size as the label and lay them directly on top of the existing rectangles. Even if I hide two, three, four, etc... labels, the rest will stay put.
Just draw a Rectangle, and slightly overlay the Objects with the Conditional Hidden expression with the position of your new empty Rectangle. Objects out to the right will be held in place by the Rectangle. No background colors or anything, just a Rectangle. Works vertically like if you have an address block and you want objects underneath the address lines to stay put. Like so...
enter image description here