I am tired of always trying to guess, if I should escape special characters like '()[]{}|' etc. when using many implementations of regexps.
It is different with, for example, Python, sed, grep, awk, Perl, rename, Apache, find and so on.
Is there any rule set which tells when I should, and when I should not, escape special characters? Does it depend on the regexp type, like PCRE, POSIX or extended regexps?
Which characters you must and which you mustn't escape indeed depends on the regex flavor you're working with.
For PCRE, and most other so-called Perl-compatible flavors, escape these outside character classes:
.^$*+?()[{\|
and these inside character classes:
^-]\
For POSIX extended regexes (ERE), escape these outside character classes (same as PCRE):
.^$*+?()[{\|
Escaping any other characters is an error with POSIX ERE.
Inside character classes, the backslash is a literal character in POSIX regular expressions. You cannot use it to escape anything. You have to use "clever placement" if you want to include character class metacharacters as literals. Put the ^ anywhere except at the start, the ] at the start, and the - at the start or the end of the character class to match these literally, e.g.:
[]^-]
In POSIX basic regular expressions (BRE), these are metacharacters that you need to escape to suppress their meaning:
.^$*[\
Escaping parentheses and curly brackets in BREs gives them the special meaning their unescaped versions have in EREs. Some implementations (e.g. GNU) also give special meaning to other characters when escaped, such as \? and +. Escaping a character other than .^$*(){} is normally an error with BREs.
Inside character classes, BREs follow the same rule as EREs.
If all this makes your head spin, grab a copy of RegexBuddy. On the Create tab, click Insert Token, and then Literal. RegexBuddy will add escapes as needed.
Modern RegEx Flavors (PCRE)
Includes C, C++, Delphi, EditPad, Java, JavaScript, Perl, PHP (preg), PostgreSQL, PowerGREP, PowerShell, Python, REALbasic, Real Studio, Ruby, TCL, VB.Net, VBScript, wxWidgets, XML Schema, Xojo, XRegExp.PCRE compatibility may vary
Anywhere: . ^ $ * + - ? ( ) [ ] { } \ |
Legacy RegEx Flavors (BRE/ERE)
Includes awk, ed, egrep, emacs, GNUlib, grep, PHP (ereg), MySQL, Oracle, R, sed.PCRE support may be enabled in later versions or by using extensions
ERE/awk/egrep/emacs
Outside a character class: . ^ $ * + ? ( ) [ { } \ |
Inside a character class: ^ - [ ]
BRE/ed/grep/sed
Outside a character class: . ^ $ * [ \
Inside a character class: ^ - [ ]
For literals, don't escape: + ? ( ) { } |
For standard regex behavior, escape: \+ \? \( \) \{ \} \|
Notes
If unsure about a specific character, it can be escaped like \xFF
Alphanumeric characters cannot be escaped with a backslash
Arbitrary symbols can be escaped with a backslash in PCRE, but not BRE/ERE (they must only be escaped when required). For PCRE ] - only need escaping within a character class, but I kept them in a single list for simplicity
Quoted expression strings must also have the surrounding quote characters escaped, and often with backslashes doubled-up (like "(\")(/)(\\.)" versus /(")(\/)(\.)/ in JavaScript)
Aside from escapes, different regex implementations may support different modifiers, character classes, anchors, quantifiers, and other features. For more details, check out regular-expressions.info, or use regex101.com to test your expressions live
Unfortunately there really isn't a set set of escape codes since it varies based on the language you are using.
However, keeping a page like the Regular Expression Tools Page or this Regular Expression Cheatsheet can go a long way to help you quickly filter things out.
POSIX recognizes multiple variations on regular expressions - basic regular expressions (BRE) and extended regular expressions (ERE). And even then, there are quirks because of the historical implementations of the utilities standardized by POSIX.
There isn't a simple rule for when to use which notation, or even which notation a given command uses.
Check out Jeff Friedl's Mastering Regular Expressions book.
Unfortunately, the meaning of things like ( and \( are swapped between Emacs style regular expressions and most other styles. So if you try to escape these you may be doing the opposite of what you want.
So you really have to know what style you are trying to quote.
Really, there isn't. there are about a half-zillion different regex syntaxes; they seem to come down to Perl, EMACS/GNU, and AT&T in general, but I'm always getting surprised too.
Sometimes simple escaping is not possible with the characters you've listed. For example, using a backslash to escape a bracket isn't going to work in the left hand side of a substitution string in sed, namely
sed -e 's/foo\(bar/something_else/'
I tend to just use a simple character class definition instead, so the above expression becomes
sed -e 's/foo[(]bar/something_else/'
which I find works for most regexp implementations.
BTW Character classes are pretty vanilla regexp components so they tend to work in most situations where you need escaped characters in regexps.
Edit: After the comment below, just thought I'd mention the fact that you also have to consider the difference between finite state automata and non-finite state automata when looking at the behaviour of regexp evaluation.
You might like to look at "the shiny ball book" aka Effective Perl (sanitised Amazon link), specifically the chapter on regular expressions, to get a feel for then difference in regexp engine evaluation types.
Not all the world's a PCRE!
Anyway, regexp's are so clunky compared to SNOBOL! Now that was an interesting programming course! Along with the one on Simula.
Ah the joys of studying at UNSW in the late '70's! (-:
https://perldoc.perl.org/perlre.html#Quoting-metacharacters and https://perldoc.perl.org/functions/quotemeta.html
In the official documentation, such characters are called metacharacters. Example of quoting:
my $regex = quotemeta($string)
s/$regex/something/
For PHP, "it is always safe to precede a non-alphanumeric with "\" to specify that it stands for itself." - http://php.net/manual/en/regexp.reference.escape.php.
Except if it's a " or '. :/
To escape regex pattern variables (or partial variables) in PHP use preg_quote()
To know when and what to escape without attempts is necessary to understand precisely the chain of contexts the string pass through. You will specify the string from the farthest side to its final destination which is the memory handled by the regexp parsing code.
Be aware how the string in memory is processed: if can be a plain string inside the code, or a string entered to the command line, but a could be either an interactive command line or a command line stated inside a shell script file, or inside a variable in memory mentioned by the code, or an (string)argument through further evaluation, or a string containing code generated dynamically with any sort of encapsulation...
Each of this context assigned some characters with special functionality.
When you want to pass the character literally without using its special function (local to the context), than that's the case you have to escape it, for the next context... which might need some other escape characters which might additionally need to be escaped in the preceding context(s).
Furthermore there can be things like character encoding (the most insidious is utf-8 because it look like ASCII for common characters, but might be optionally interpreted even by the terminal depending on its settings so it might behave differently, then the encoding attribute of HTML/XML, it's necessary to understand the process precisely right.
E.g. A regexp in the command line starting with perl -npe, needs to be transferred to a set of exec system calls connecting as pipe the file handles, each of this exec system calls just has a list of arguments that were separated by (non escaped)spaces, and possibly pipes(|) and redirection (> N> N>&M), parenthesis, interactive expansion of * and ?, $(()) ... (all this are special characters used by the *sh which might appear to interfere with the character of the regular expression in the next context, but they are evaluated in order: before the command line. The command line is read by a program as bash/sh/csh/tcsh/zsh, essentially inside double quote or single quote the escape is simpler but it is not necessary to quote a string in the command line because mostly the space has to be prefixed with backslash and the quote are not necessary leaving available the expand functionality for characters * and ?, but this parse as different context as within quote. Then when the command line is evaluated the regexp obtained in memory (not as written in the command line) receives the same treatment as it would be in a source file.
For regexp there is character-set context within square brackets [ ], perl regular expression can be quoted by a large set of non alfa-numeric characters (E.g. m// or m:/better/for/path: ...).
You have more details about characters in other answer, which are very specific to the final regexp context. As I noted you mention that you find the regexp escape with attempts, that's probably because different context has different set of character that confused your memory of attempts (often backslash is the character used in those different context to escape a literal character instead of its function).
For Ionic (Typescript) you have to double slash in order to scape the characters.
For example (this is to match some special characters):
"^(?=.*[\\]\\[!¡\'=ªº\\-\\_ç##$%^&*(),;\\.?\":{}|<>\+\\/])"
Pay attention to this ] [ - _ . / characters. They have to be double slashed. If you don't do that, you are going to have a type error in your code.
to avoid having to worry about which regex variant and all the bespoke peculiarties, just use this generic function that covers every regex variant other than BRE (unless they have unicode multi-byte chars that are meta) :
jot -s '' -c - 32 126 |
mawk '
function ___(__,_) {
return substr(_="",
gsub("[][!-/_\140:-#{-~]","[&]",__),
gsub("["(_="\\\\")"^]",_ "&",__))__
} ($++NF = ___($!_))^_'
!"#$%&'()*+,-./0123456789:;<=>?
#ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_
`abcdefghijklmnopqrstuvwxyz{|}~
[!]["][#][$][%][&]['][(][)][*][+][,][-][.][/]
0 1 2 3 4 5 6 7 8 9 [:][;][<][=][>][?]
[#] ABCDEFGHIJKLMNOPQRSTUVWXYZ [[]\\ []]\^ [_]
[`] abcdefghijklmnopqrstuvwxyz [{][|][}][~]
square-brackets are much easier to deal with, since there's no risk of triggering warning messages about "escaping too much", e.g. :
function ____(_) {
return substr("", gsub("[[:punct:]]","\\\\&",_))_
}
\!\"\#\$\%\&\'\(\)\*\+\,\-\.\/ 0123456789\:\;\<\=\>\?
\#ABCDEFGHIJKLMNOPQRSTUVWXYZ\[\\\]\^\_\`abcdefghijklmnopqrstuvwxyz \{\|\}\~
gawk: cmd. line:1: warning: regexp escape sequence `\!' is not a known regexp operator
gawk: cmd. line:1: warning: regexp escape sequence `\"' is not a known regexp operator
gawk: cmd. line:1: warning: regexp escape sequence `\#' is not a known regexp operator
gawk: cmd. line:1: warning: regexp escape sequence `\%' is not a known regexp operator
gawk: cmd. line:1: warning: regexp escape sequence `\&' is not a known regexp operator
gawk: cmd. line:1: warning: regexp escape sequence `\,' is not a known regexp operator
gawk: cmd. line:1: warning: regexp escape sequence `\:' is not a known regexp operator
gawk: cmd. line:1: warning: regexp escape sequence `\;' is not a known regexp operator
gawk: cmd. line:1: warning: regexp escape sequence `\=' is not a known regexp operator
gawk: cmd. line:1: warning: regexp escape sequence `\#' is not a known regexp operator
gawk: cmd. line:1: warning: regexp escape sequence `\_' is not a known regexp operator
gawk: cmd. line:1: warning: regexp escape sequence `\~' is not a known regexp operator
Using Raku (formerly known as Perl_6)
Works (backslash or quote all non-alphanumeric characters except underscore):
~$ raku -e 'say $/ if "#.*?" ~~ m/ \# \. \* \? /; #works fine'
｢#.*?｣
There exist six flavors of Regular Expression languages, according to Damian Conway's pdf/talk "Everything You Know About Regexes Is Wrong". Raku represents a significant (~15 year) re-working of standard Perl(5)/PCRE Regular Expressions.
In those 15 years the Perl_6 / Raku language experts decided that all non-alphanumeric characters (except underscore) shall be reserved as Regex metacharacters even if no present usage exists. To denote non-alphanumeric characters (except underscore) as literals, backslash or escape them.
So the above example prints the $/ match variable if a match to a literal #.*? character sequence is found. Below is what happens if you don't: # is interpreted as the start of a comment, . dot is interpreted as any character (including whitespace), * asterisk is interpreted as a zero-or-more quantifier, and ? question mark is interpreted as either a zero-or-one quantifier or a frugal (i.e. non-greedy) quantifier-modifier (depending on context):
Errors:
~$ ~$ raku -e 'say $/ if "#.*?" ~~ m/ # . * ? /; #ERROR!'
===SORRY!===
Regex not terminated.
at -e:1
------> y $/ if "#.*?" ~~ m/ # . * ? /; #ERROR!⏏<EOL>
Regex not terminated.
at -e:1
------> y $/ if "#.*?" ~~ m/ # . * ? /; #ERROR!⏏<EOL>
Couldn't find terminator / (corresponding / was at line 1)
at -e:1
------> y $/ if "#.*?" ~~ m/ # . * ? /; #ERROR!⏏<EOL>
expecting any of:
/
https://docs.raku.org/language/regexes
https://raku.org/
I will use PhP notation for variables to make life easy.
Suppose the database is UTF-8, and the client is set to UTF-8.
There are two sides to the question. Knowing that the ASCII for ' (quote) is 39 decimal:
Client Side
When the query variable, $title, is escaped, using function such as real_escape_string(), will the function escape all bytes that have value of 39 separately? Or will it see if the byte of value 39 is a part of UTF-8 symbol?
Server Side
SELECT * from STORIES WHERE title = 'Hello'
What does MYSQL assume the query encoding to be? This includes the part:
SELECT * from STORIES WHERE title = '
Then if a $filteredTitle happens to have the byte 39 in it which is part of a UTF-8 symbol, how does MYSQL know that it is not a quote?
Let's look at two issues.
When providing a SELECT statement, strings must be "escaped". Otherwise, there would be syntax problems with quotes inside quotes. In particular ', ", and \ must be preceded by a backslash to avoid confusion. mysqli_real_escape_string() provides that function. (Don't use mysql_real_escape_string(), it belongs to the deprecated mysql_* API.) No "un-escaping" is needed when you SELECT the string.
The ascii apostrophe (decimal 39, hex 27, sometimes called "single quote") is commonly used in many programming languages for quoting strings. A long list of utf8 "quotes" can be found here.
When i am reading some text from an Xml and putting it to the database i am getting a error if the text contains '(apostrophe) . How to overcome this problem while i am inserting into the DB.
Where ever the apostrophe is add a \ (backslash) before it. Using your text editor to do a find and replace all for ' to \' should work. BE CAREFUL not to mess up the XML structure.
ex.
John's
Needs to be
John\'s
You can also use PHP or C# to escape it for you also.
Here is the PHP function.
You should always escape you input data with whatever language-specific methodology you have for doing so. For MySQL the escape character is \. Another alternative is to use prepared statements with parametrized inputs. This would eliminate the need to escape the single apostrophe.
My guess is that you also have a significant SQL injection vulnerability with the way you are doing things. If you are not even escaping your input values or using parametrized prepared statements, then one could easily inject malicious code into the XML.
I don't know what language or method you're using for your import. Typically it's the backslash character, \ . So you would need to replace 's with \'. Make sense?
From 9.1.1 String Literals in the MySQL reference:
There are several ways to include quote characters within a string:
A “'” inside a string quoted with “'” may be written as “''”.
A “"” inside a string quoted with “"” may be written as “""”.
Precede the quote character by an escape character (“\”).
A “'” inside a string quoted with “"” needs no special treatment and need not be doubled or escaped. In the same way, “"” inside a string quoted with “'” needs no special treatment.
Thus, the given string foo'bar can be written in MySQL1:
'foo''bar'
'foo\'bar'
"foo'bar"
While the above addresses the primary question, use placeholders (aka prepared statements) - look up the correct method per language/adapter. Placeholders eliminate the need to quote (which prevents mistakes introduced by custom logic) and prevent against many cases of malicious SQL injection.
1 The syntax chosen by MySQL differs from other common SQL implementations; this syntax is not universal.
I have two databases. One has apostrophe in names like O'Bannon and one does not. I need to merge them and find the duplicates. Since it's harder to add the apostrophes I'm tring to remove them instead
But this...
UPDATE Client
SET Last_Name = REPLACE(''','')
Clearly won't work. How does one escape the '.
I'm using Xojo (not PHP)
Like you say, you'll want to escape quote characters.
See this documentation on string literals:
There are several ways to include quote characters within a string:
A “'” inside a string quoted with “'” may be written as “''”.
A “"” inside a string quoted with “"” may be written as “""”.
Precede the quote character by an escape character (“\”).
A “'” inside a string quoted with “"” needs no special treatment and need not be doubled or escaped. In the same way, “"” inside a string quoted with “'” needs no special treatment.
Depending on how you're dealing with the SQL, though, you may need to do more than that. If the application is escaping the quote character, and passing that to a stored procedure call, you may run into the same issue if you are not using parameter binding with prepared statements. This is due to MySQL removing the escape character upon processing the inputs of the SP. Then the unsantized character makes its way to the query construction and the problem repeats itself if it should be escaped there. In this case, you'll want to switch to parameter binding, so that the escaping and query construction is out of your hands.
Here we go:
UPDATE Client SET Last_Name = REPLACE(Last_Name, '\'', '');
You just need to escape apostrophe will backslash .
Simply add an escape character(\) in front of the quote:
SET Last_Name = REPLACE('\'','')
Still I don't think this is the right way to go as you will lose the information for the original name of the person and so o'reily and oreily will seem to be the same surname to you.
From 9.1.1 String Literals
Table 9.1. Special Character Escape Sequences
Escape Sequence Character Represented by Sequence
\0 An ASCII NUL (0x00) character.
\' A single quote (“'”) character.
\" A double quote (“"”) character.
\b A backspace character.
\n A newline (linefeed) character.
\r A carriage return character.
\t A tab character.
\Z ASCII 26 (Control+Z). See note following the table.
\\ A backslash (“\”) character.
\% A “%” character. See note following the table.
\_ A “_” character. See note following the table.
Of course if ANSI_MODE is not enabled you could use double quotes
If in case you are just looking to select, i.e., to match a field with data containing apostrophe.
SELECT PhraseId FROM Phrase WHERE Text = REPLACE("don't", "\'", "''")