Related
I'm trying to use a select statement to get all of the columns from a certain MySQL table except one. Is there a simple way to do this?
EDIT: There are 53 columns in this table (NOT MY DESIGN)
Actually there is a way, you need to have permissions of course for doing this ...
SET #sql = CONCAT('SELECT ', (SELECT REPLACE(GROUP_CONCAT(COLUMN_NAME), '<columns_to_omit>,', '') FROM INFORMATION_SCHEMA.COLUMNS WHERE TABLE_NAME = '<table>' AND TABLE_SCHEMA = '<database>'), ' FROM <table>');
PREPARE stmt1 FROM #sql;
EXECUTE stmt1;
Replacing <table>, <database> and <columns_to_omit>
(Do not try this on a big table, the result might be... surprising !)
TEMPORARY TABLE
DROP TABLE IF EXISTS temp_tb;
CREATE TEMPORARY TABLE ENGINE=MEMORY temp_tb SELECT * FROM orig_tb;
ALTER TABLE temp_tb DROP col_a, DROP col_f,DROP col_z; #// MySQL
SELECT * FROM temp_tb;
DROP syntax may vary for databases #Denis Rozhnev
Would a View work better in this case?
CREATE VIEW vwTable
as
SELECT
col1
, col2
, col3
, col..
, col53
FROM table
You can do:
SELECT column1, column2, column4 FROM table WHERE whatever
without getting column3, though perhaps you were looking for a more general solution?
If you are looking to exclude the value of a field, e.g. for security concerns / sensitive info, you can retrieve that column as null.
e.g.
SELECT *, NULL AS salary FROM users
To the best of my knowledge, there isn't. You can do something like:
SELECT col1, col2, col3, col4 FROM tbl
and manually choose the columns you want. However, if you want a lot of columns, then you might just want to do a:
SELECT * FROM tbl
and just ignore what you don't want.
In your particular case, I would suggest:
SELECT * FROM tbl
unless you only want a few columns. If you only want four columns, then:
SELECT col3, col6, col45, col 52 FROM tbl
would be fine, but if you want 50 columns, then any code that makes the query would become (too?) difficult to read.
While trying the solutions by #Mahomedalid and #Junaid I found a problem. So thought of sharing it. If the column name is having spaces or hyphens like check-in then the query will fail. The simple workaround is to use backtick around column names. The modified query is below
SET #SQL = CONCAT('SELECT ', (SELECT GROUP_CONCAT(CONCAT("`", COLUMN_NAME, "`")) FROM
INFORMATION_SCHEMA.COLUMNS WHERE TABLE_NAME = 'users' AND COLUMN_NAME NOT IN ('id')), ' FROM users');
PREPARE stmt1 FROM #SQL;
EXECUTE stmt1;
If the column that you didn't want to select had a massive amount of data in it, and you didn't want to include it due to speed issues and you select the other columns often, I would suggest that you create a new table with the one field that you don't usually select with a key to the original table and remove the field from the original table. Join the tables when that extra field is actually required.
You could use DESCRIBE my_table and use the results of that to generate the SELECT statement dynamically.
My main problem is the many columns I get when joining tables. While this is not the answer to your question (how to select all but certain columns from one table), I think it is worth mentioning that you can specify table. to get all columns from a particular table, instead of just specifying .
Here is an example of how this could be very useful:
select users.*, phone.meta_value as phone, zipcode.meta_value as zipcode
from users
left join user_meta as phone
on ( (users.user_id = phone.user_id) AND (phone.meta_key = 'phone') )
left join user_meta as zipcode
on ( (users.user_id = zipcode.user_id) AND (zipcode.meta_key = 'zipcode') )
The result is all the columns from the users table, and two additional columns which were joined from the meta table.
I liked the answer from #Mahomedalid besides this fact informed in comment from #Bill Karwin. The possible problem raised by #Jan Koritak is true I faced that but I have found a trick for that and just want to share it here for anyone facing the issue.
we can replace the REPLACE function with where clause in the sub-query of Prepared statement like this:
Using my table and column name
SET #SQL = CONCAT('SELECT ', (SELECT GROUP_CONCAT(COLUMN_NAME) FROM INFORMATION_SCHEMA.COLUMNS WHERE TABLE_NAME = 'users' AND COLUMN_NAME NOT IN ('id')), ' FROM users');
PREPARE stmt1 FROM #SQL;
EXECUTE stmt1;
So, this is going to exclude only the field id but not company_id
Yes, though it can be high I/O depending on the table here is a workaround I found for it.
SELECT *
INTO #temp
FROM table
ALTER TABLE #temp DROP COlUMN column_name
SELECT *
FROM #temp
It is good practice to specify the columns that you are querying even if you query all the columns.
So I would suggest you write the name of each column in the statement (excluding the one you don't want).
SELECT
col1
, col2
, col3
, col..
, col53
FROM table
I agree with the "simple" solution of listing all the columns, but this can be burdensome, and typos can cause lots of wasted time. I use a function "getTableColumns" to retrieve the names of my columns suitable for pasting into a query. Then all I need to do is to delete those I don't want.
CREATE FUNCTION `getTableColumns`(tablename varchar(100))
RETURNS varchar(5000) CHARSET latin1
BEGIN
DECLARE done INT DEFAULT 0;
DECLARE res VARCHAR(5000) DEFAULT "";
DECLARE col VARCHAR(200);
DECLARE cur1 CURSOR FOR
select COLUMN_NAME from information_schema.columns
where TABLE_NAME=#table AND TABLE_SCHEMA="yourdatabase" ORDER BY ORDINAL_POSITION;
DECLARE CONTINUE HANDLER FOR NOT FOUND SET done = 1;
OPEN cur1;
REPEAT
FETCH cur1 INTO col;
IF NOT done THEN
set res = CONCAT(res,IF(LENGTH(res)>0,",",""),col);
END IF;
UNTIL done END REPEAT;
CLOSE cur1;
RETURN res;
Your result returns a comma delimited string, for example...
col1,col2,col3,col4,...col53
I agree that it isn't sufficient to Select *, if that one you don't need, as mentioned elsewhere, is a BLOB, you don't want to have that overhead creep in.
I would create a view with the required data, then you can Select * in comfort --if the database software supports them. Else, put the huge data in another table.
At first I thought you could use regular expressions, but as I've been reading the MYSQL docs it seems you can't. If I were you I would use another language (such as PHP) to generate a list of columns you want to get, store it as a string and then use that to generate the SQL.
Based on #Mahomedalid answer, I have done some improvements to support "select all columns except some in mysql"
SET #database = 'database_name';
SET #tablename = 'table_name';
SET #cols2delete = 'col1,col2,col3';
SET #sql = CONCAT(
'SELECT ',
(
SELECT GROUP_CONCAT( IF(FIND_IN_SET(COLUMN_NAME, #cols2delete), NULL, COLUMN_NAME ) )
FROM INFORMATION_SCHEMA.COLUMNS WHERE TABLE_NAME = #tablename AND TABLE_SCHEMA = #database
),
' FROM ',
#tablename);
SELECT #sql;
If you do have a lots of cols, use this sql to change group_concat_max_len
SET ##group_concat_max_len = 2048;
I agree with #Mahomedalid's answer, but I didn't want to do something like a prepared statement and I didn't want to type all the fields, so what I had was a silly solution.
Go to the table in phpmyadmin->sql->select, it dumps the query: copy, replace and done! :)
While I agree with Thomas' answer (+1 ;)), I'd like to add the caveat that I'll assume the column that you don't want contains hardly any data. If it contains enormous amounts of text, xml or binary blobs, then take the time to select each column individually. Your performance will suffer otherwise. Cheers!
Just do
SELECT * FROM table WHERE whatever
Then drop the column in you favourite programming language: php
while (($data = mysql_fetch_array($result, MYSQL_ASSOC)) !== FALSE) {
unset($data["id"]);
foreach ($data as $k => $v) {
echo"$v,";
}
}
The answer posted by Mahomedalid has a small problem:
Inside replace function code was replacing "<columns_to_delete>," by "", this replacement has a problem if the field to replace is the last one in the concat string due to the last one doesn't have the char comma "," and is not removed from the string.
My proposal:
SET #sql = CONCAT('SELECT ', (SELECT REPLACE(GROUP_CONCAT(COLUMN_NAME),
'<columns_to_delete>', '\'FIELD_REMOVED\'')
FROM INFORMATION_SCHEMA.COLUMNS
WHERE TABLE_NAME = '<table>'
AND TABLE_SCHEMA = '<database>'), ' FROM <table>');
Replacing <table>, <database> and `
The column removed is replaced by the string "FIELD_REMOVED" in my case this works because I was trying to safe memory. (The field I was removing is a BLOB of around 1MB)
You can use SQL to generate SQL if you like and evaluate the SQL it produces. This is a general solution as it extracts the column names from the information schema. Here is an example from the Unix command line.
Substituting
MYSQL with your mysql command
TABLE with the table name
EXCLUDEDFIELD with excluded field name
echo $(echo 'select concat("select ", group_concat(column_name) , " from TABLE") from information_schema.columns where table_name="TABLE" and column_name != "EXCLUDEDFIELD" group by "t"' | MYSQL | tail -n 1) | MYSQL
You will really only need to extract the column names in this way only once to construct the column list excluded that column, and then just use the query you have constructed.
So something like:
column_list=$(echo 'select group_concat(column_name) from information_schema.columns where table_name="TABLE" and column_name != "EXCLUDEDFIELD" group by "t"' | MYSQL | tail -n 1)
Now you can reuse the $column_list string in queries you construct.
I wanted this too so I created a function instead.
public function getColsExcept($table,$remove){
$res =mysql_query("SHOW COLUMNS FROM $table");
while($arr = mysql_fetch_assoc($res)){
$cols[] = $arr['Field'];
}
if(is_array($remove)){
$newCols = array_diff($cols,$remove);
return "`".implode("`,`",$newCols)."`";
}else{
$length = count($cols);
for($i=0;$i<$length;$i++){
if($cols[$i] == $remove)
unset($cols[$i]);
}
return "`".implode("`,`",$cols)."`";
}
}
So how it works is that you enter the table, then a column you don't want or as in an array: array("id","name","whatevercolumn")
So in select you could use it like this:
mysql_query("SELECT ".$db->getColsExcept('table',array('id','bigtextcolumn'))." FROM table");
or
mysql_query("SELECT ".$db->getColsExcept('table','bigtextcolumn')." FROM table");
May be I have a solution to Jan Koritak's pointed out discrepancy
SELECT CONCAT('SELECT ',
( SELECT GROUP_CONCAT(t.col)
FROM
(
SELECT CASE
WHEN COLUMN_NAME = 'eid' THEN NULL
ELSE COLUMN_NAME
END AS col
FROM INFORMATION_SCHEMA.COLUMNS
WHERE TABLE_NAME = 'employee' AND TABLE_SCHEMA = 'test'
) t
WHERE t.col IS NOT NULL) ,
' FROM employee' );
Table :
SELECT table_name,column_name
FROM INFORMATION_SCHEMA.COLUMNS
WHERE TABLE_NAME = 'employee' AND TABLE_SCHEMA = 'test'
================================
table_name column_name
employee eid
employee name_eid
employee sal
================================
Query Result:
'SELECT name_eid,sal FROM employee'
I use this work around although it may be "Off topic" - using mysql workbench and the query builder -
Open the columns view
Shift select all the columns you want in your query (in your case all but one which is what i do)
Right click and select send to SQL Editor-> name short.
Now you have the list and you can then copy paste the query to where ever.
If it's always the same one column, then you can create a view that doesn't have it in it.
Otherwise, no I don't think so.
I would like to add another point of view in order to solve this problem, specially if you have a small number of columns to remove.
You could use a DB tool like MySQL Workbench in order to generate the select statement for you, so you just have to manually remove those columns for the generated statement and copy it to your SQL script.
In MySQL Workbench the way to generate it is:
Right click on the table -> send to Sql Editor -> Select All Statement.
The accepted answer has several shortcomings.
It fails where the table or column names requires backticks
It fails if the column you want to omit is last in the list
It requires listing the table name twice (once for the select and another for the query text) which is redundant and unnecessary
It can potentially return column names in the wrong order
All of these issues can be overcome by simply including backticks in the SEPARATOR for your GROUP_CONCAT and using a WHERE condition instead of REPLACE(). For my purposes (and I imagine many others') I wanted the column names returned in the same order that they appear in the table itself. To achieve this, here we use an explicit ORDER BY clause inside of the GROUP_CONCAT() function:
SELECT CONCAT(
'SELECT `',
GROUP_CONCAT(COLUMN_NAME ORDER BY `ORDINAL_POSITION` SEPARATOR '`,`'),
'` FROM `',
`TABLE_SCHEMA`,
'`.`',
TABLE_NAME,
'`;'
)
FROM INFORMATION_SCHEMA.COLUMNS
WHERE `TABLE_SCHEMA` = 'my_database'
AND `TABLE_NAME` = 'my_table'
AND `COLUMN_NAME` != 'column_to_omit';
I have a suggestion but not a solution.
If some of your columns have a larger data sets then you should try with following
SELECT *, LEFT(col1, 0) AS col1, LEFT(col2, 0) as col2 FROM table
If you use MySQL Workbench you can right-click your table and click Send to sql editor and then Select All Statement This will create an statement where all fields are listed, like this:
SELECT `purchase_history`.`id`,
`purchase_history`.`user_id`,
`purchase_history`.`deleted_at`
FROM `fs_normal_run_2`.`purchase_history`;
SELECT * FROM fs_normal_run_2.purchase_history;
Now you can just remove those that you dont want.
Let us say I have two tables with many columns so I do not want to name the column names explicitly in my query but i want to avoid duplicate names.
If I do:
CREATE TABLE new_table
SELECT a.*, b.*
FROM table1 a
INNER JOIN table2 b ON a.myID = b.myId
WHERE a.age > 10 and b.ice = 'melted'
I will get an error saying: duplicate column name myId, I could also get more errors if more column names in a and b are the same.
How can I avoid this issue by automatically adding a prefix to all column names in a.* and b.* w/o explicitly mentioning all the column names - very tedious to do so!
Thanks!
Unfortunately, you will have to list the columns in case table have matching column names. However, you can use information_schema to get the column names, format those and copy paste in the query to save the pain, e.g.:
SELECT GROUP_CONCAT(CONCAT('a.', COLUMN_NAME)
FROM INFORMATION_SCHEMA.COLUMNS
WHERE TABLE_SCHEMA = 'schema' AND TABLE_NAME = 'table';
The above query should give you comma separated column names with a. prefix. You can then use the same query for table b, get the names out and use it in the main SELECT query.
Update
As #Uueerdo has rightly said, you can add alias to columns as well, e.g.:
SELECT GROUP_CONCAT(CONCAT('a.', COLUMN_NAME, ' AS a_', COLUMN_NAME))
FROM INFORMATION_SCHEMA.COLUMNS
WHERE TABLE_SCHEMA = 'schema' AND TABLE_NAME = 'table';
In my experience ORMs will run an initial DESCRIBE query so it can do this sort of stuff for you once it has the column names. But if you insist on doing it dynamically in a single query, you could do this with pure MySQL:
-- config
SET #database = 'your_database';
SET #tableA = 'table1';
SET #tableB = 'table2';
-- table alias "a" columns
SET #fieldsA = NULL;
SELECT GROUP_CONCAT(CONCAT('a.', COLUMN_NAME), ' AS ',CONCAT('`a.', COLUMN_NAME,'`')) INTO #fieldsA
FROM INFORMATION_SCHEMA.COLUMNS
WHERE TABLE_SCHEMA = #database AND TABLE_NAME = #tableA;
-- table alias "b" columns
SET #fieldsB = NULL;
SELECT GROUP_CONCAT(CONCAT('b.', COLUMN_NAME), ' AS ',CONCAT('`b.', COLUMN_NAME,'`')) INTO #fieldsB
FROM INFORMATION_SCHEMA.COLUMNS
WHERE TABLE_SCHEMA = #database AND TABLE_NAME = #tableB;
-- some variables for readability
SET #fields = CONCAT(' ', #fieldsA, ',', #fieldsB,' ');
SET #tableAliasA = CONCAT(' ',#database, '.', #tableA,' a ');
SET #tableAliasB = CONCAT(' ',#database, '.', #tableB,' b ');
-- generate our final query
SET #query = CONCAT('CREATE TABLE new_table SELECT', #fields,
'FROM', #tableAliasA,
'INNER JOIN', #tableAliasB,
'ON a.myID = b.myId WHERE a.age > 10 and b.ice = ''melted''');
-- finally run the query:
PREPARE stmt1 FROM #query;
EXECUTE stmt1;
DEALLOCATE PREPARE stmt1;
-- if you have problems with the above query, uncomment the following to get the query so you can run it separately
-- SELECT #query;
I'd strongly advise against using this sort of solution though. I'd sooner run an initial DESCRIBE query as earlier stated, then generate your query based on that. Another solution is to create a temporary table as a copy of the second table, then rename problematic columns, then proceed to join on it to produce the data you need to create your new_table. MySQL has no issues with result columns having the same name, the issue here is trying to create a table with two columns with the same name. So essentially what you're trying to do is a star select but excluding a column.
Another approach is to just select only the primary key from both:
SELECT a.myID as `aId`, b.myId as `bId` then create your table containing only that. Then if you ever need data from a particular table, just LEFT JOIN on it to grab the information you're looking for. You can take this a step further and set up a VIEW to do this sort of thing for you. VIEWs can join tables for you and make it very easy to select whatever columns you're looking for. You can also setup multiple VIEWs as well. Also note that views behave just like tables for the purpose of joins. You can JOIN a view with a table, or you can join a view with a view, etc.
So rather than do what you're trying to do -- creating a new table with the data from two other tables -- consider whether you're actually looking for a VIEW.
In MySQL, I know I can list the tables in a database with:
SHOW TABLES
However, I want to insert these table names into another table, for instance:
INSERT INTO metadata(table_name) SHOW TABLES /* does not work */
Is there a way to get the table names using a standard SELECT statement, something like:
INSERT INTO metadata(table_name) SELECT name FROM table_names /* what should table_names be? */
To get the name of all tables use:
SELECT table_name FROM information_schema.tables;
To get the name of the tables from a specific database use:
SELECT table_name FROM information_schema.tables
WHERE table_schema = 'your_database_name';
Now, to answer the original question, use this query:
INSERT INTO table_name
SELECT table_name FROM information_schema.tables
WHERE table_schema = 'your_database_name';
For more details see: http://dev.mysql.com/doc/refman/5.0/en/information-schema.html
Try:
select * from information_schema.tables
See: http://dev.mysql.com/doc/refman/5.0/en/information-schema.html
if we have multiple databases and we need to select all tables for a particular database we can use TABLE_SCHEMA to define database name as:
select table_name from information_schema.tables where TABLE_SCHEMA='dbname';
Besides using the INFORMATION_SCHEMA table, to use SHOW TABLES to insert into a table you would use the following
<?php
$sql = "SHOW TABLES FROM $dbname";
$result = mysql_query($sql);
$arrayCount = 0
while ($row = mysql_fetch_row($result)) {
$tableNames[$arrayCount] = $row[0];
$arrayCount++; //only do this to make sure it starts at index 0
}
foreach ($tableNames as &$name {
$query = "INSERT INTO metadata (table_name) VALUES ('".$name."')";
mysql_query($query);
}
?>
Take a look at the table TABLES in the database information_schema. It contains information about the tables in your other databases. But if you're on shared hosting, you probably don't have access to it.
SELECT table_name
FROM information_schema.tables
WHERE table_schema = 'DATABASE'
MySQL INFORMATION_SCHEMA.TABLES table contains data about both tables (not temporary but permanent ones) and views. The column TABLE_TYPE defines whether this is record for table or view (for tables TABLE_TYPE='BASE TABLE' and for views TABLE_TYPE='VIEW'). So if you want to see from your schema (database) tables only there's the following query :
SELECT *
FROM information_schema.tables
WHERE table_type='BASE TABLE'
AND table_schema='myschema'
I think you can get the data you want from INFORMATION_SCHEMA TABLES.
You can find more info here: http://dev.mysql.com/doc/refman/5.0/en/tables-table.html
For fetching the name of all tables:
SELECT table_name
FROM information_schema.tables;
If you need to fetch it for a specific database:
SELECT table_name
FROM information_schema.tables
WHERE table_schema = 'your_db_name';
Output:
+--------------------+
| table_name |
+--------------------+
| myapp |
| demodb |
| cliquein |
+--------------------+
3 rows in set (0.00 sec)
There is yet another simpler way to get table names
SHOW TABLES FROM <database_name>
I think it may be helpful to point out that if you want to select tables that contain specific words you can easily do it using the SELECT (instead of SHOW). Below query easily narrows down the search to tables that contain "keyword"
SELECT *
FROM information_schema.tables
WHERE table_name like "%keyword%"
This below query worked for me. This can able to show the databases,tables,column names,data types and columns count.
**select table_schema Schema_Name ,table_name TableName,column_name ColumnName,ordinal_position "Position",column_type DataType,COUNT(1) ColumnCount
FROM information_schema.columns
GROUP by table_schema,table_name,column_name,ordinal_position, column_type;**
Yes, using information_schema.TABLES.
This works even on a cloud solution like Skyvia shown below:
With this you can simply use a SELECT statement like the above to add it up for your INSERT statement. But change the table_schema value to match the database name for your actual setup.
To insert, update and delete do the following:
$teste = array('LOW_PRIORITY', 'DELAYED', 'HIGH_PRIORITY', 'IGNORE', 'INTO', 'INSERT', 'UPDATE', 'DELETE', 'QUICK', 'FROM');
$teste1 = array("\t", "\n", "\r", "\0", "\x0B");
$strsql = trim(str_ireplace($teste1, ' ', str_ireplace($teste, '', $strsql)));
$nomeTabela = substr($strsql, 0, strpos($strsql, ' '));
print($nomeTabela);
exit;
I would like to concatenate column names in a way that the first part of the column name is a string and the second part is a number which is the result of another query.
For example:
SELECT CONCAT('column', mytable.mycolumn) FROM table ...
Can this be done in some way. This way it doesn't give me errors but I don't get the expected result and it seems the concatenation doesn't work.
I previously said that this couldn't be done, but I was wrong. I ended up needing something like this myself so I looked around, and discovered that server-side prepared statements let you build and execute arbitrary SQL statements from strings.
Here is an example I just did to prove the concept:
set #query := (
select concat(
"select",
group_concat(concat("\n 1 as ", column_name) separator ','),
"\nfrom dual")
from information_schema.columns
where table_name = 'columns')
;
prepare s1 from #query
;
execute s1
;
deallocate prepare s1
;
If the number of columns is fixed, then a non-dynamic approach could be:
select
case mytable.mycolumn
when 1 then column1 -- or: when 'a' then columna
when 2 then column2
when ...
else ...
end as my_semi_dynamic_column
from ...
I don't believe you can do this with CONCAT() and CONCAT_WS(). I'd recommend using the langauge you are working with the create the field names. Doing it this way would be pretty scary, depending on where the data in the database came from.
I would suggest looking at information_schema. The following code is untested but should theoretically work. Obviously replace your table name with an appropriate table name or link to information_schema.tables and use the table_type in your where clause
select concat('column', column_name) from information_schema.columns where table_name ='your table name'
I'm trying to use a select statement to get all of the columns from a certain MySQL table except one. Is there a simple way to do this?
EDIT: There are 53 columns in this table (NOT MY DESIGN)
Actually there is a way, you need to have permissions of course for doing this ...
SET #sql = CONCAT('SELECT ', (SELECT REPLACE(GROUP_CONCAT(COLUMN_NAME), '<columns_to_omit>,', '') FROM INFORMATION_SCHEMA.COLUMNS WHERE TABLE_NAME = '<table>' AND TABLE_SCHEMA = '<database>'), ' FROM <table>');
PREPARE stmt1 FROM #sql;
EXECUTE stmt1;
Replacing <table>, <database> and <columns_to_omit>
(Do not try this on a big table, the result might be... surprising !)
TEMPORARY TABLE
DROP TABLE IF EXISTS temp_tb;
CREATE TEMPORARY TABLE ENGINE=MEMORY temp_tb SELECT * FROM orig_tb;
ALTER TABLE temp_tb DROP col_a, DROP col_f,DROP col_z; #// MySQL
SELECT * FROM temp_tb;
DROP syntax may vary for databases #Denis Rozhnev
Would a View work better in this case?
CREATE VIEW vwTable
as
SELECT
col1
, col2
, col3
, col..
, col53
FROM table
You can do:
SELECT column1, column2, column4 FROM table WHERE whatever
without getting column3, though perhaps you were looking for a more general solution?
If you are looking to exclude the value of a field, e.g. for security concerns / sensitive info, you can retrieve that column as null.
e.g.
SELECT *, NULL AS salary FROM users
To the best of my knowledge, there isn't. You can do something like:
SELECT col1, col2, col3, col4 FROM tbl
and manually choose the columns you want. However, if you want a lot of columns, then you might just want to do a:
SELECT * FROM tbl
and just ignore what you don't want.
In your particular case, I would suggest:
SELECT * FROM tbl
unless you only want a few columns. If you only want four columns, then:
SELECT col3, col6, col45, col 52 FROM tbl
would be fine, but if you want 50 columns, then any code that makes the query would become (too?) difficult to read.
While trying the solutions by #Mahomedalid and #Junaid I found a problem. So thought of sharing it. If the column name is having spaces or hyphens like check-in then the query will fail. The simple workaround is to use backtick around column names. The modified query is below
SET #SQL = CONCAT('SELECT ', (SELECT GROUP_CONCAT(CONCAT("`", COLUMN_NAME, "`")) FROM
INFORMATION_SCHEMA.COLUMNS WHERE TABLE_NAME = 'users' AND COLUMN_NAME NOT IN ('id')), ' FROM users');
PREPARE stmt1 FROM #SQL;
EXECUTE stmt1;
If the column that you didn't want to select had a massive amount of data in it, and you didn't want to include it due to speed issues and you select the other columns often, I would suggest that you create a new table with the one field that you don't usually select with a key to the original table and remove the field from the original table. Join the tables when that extra field is actually required.
You could use DESCRIBE my_table and use the results of that to generate the SELECT statement dynamically.
My main problem is the many columns I get when joining tables. While this is not the answer to your question (how to select all but certain columns from one table), I think it is worth mentioning that you can specify table. to get all columns from a particular table, instead of just specifying .
Here is an example of how this could be very useful:
select users.*, phone.meta_value as phone, zipcode.meta_value as zipcode
from users
left join user_meta as phone
on ( (users.user_id = phone.user_id) AND (phone.meta_key = 'phone') )
left join user_meta as zipcode
on ( (users.user_id = zipcode.user_id) AND (zipcode.meta_key = 'zipcode') )
The result is all the columns from the users table, and two additional columns which were joined from the meta table.
I liked the answer from #Mahomedalid besides this fact informed in comment from #Bill Karwin. The possible problem raised by #Jan Koritak is true I faced that but I have found a trick for that and just want to share it here for anyone facing the issue.
we can replace the REPLACE function with where clause in the sub-query of Prepared statement like this:
Using my table and column name
SET #SQL = CONCAT('SELECT ', (SELECT GROUP_CONCAT(COLUMN_NAME) FROM INFORMATION_SCHEMA.COLUMNS WHERE TABLE_NAME = 'users' AND COLUMN_NAME NOT IN ('id')), ' FROM users');
PREPARE stmt1 FROM #SQL;
EXECUTE stmt1;
So, this is going to exclude only the field id but not company_id
Yes, though it can be high I/O depending on the table here is a workaround I found for it.
SELECT *
INTO #temp
FROM table
ALTER TABLE #temp DROP COlUMN column_name
SELECT *
FROM #temp
It is good practice to specify the columns that you are querying even if you query all the columns.
So I would suggest you write the name of each column in the statement (excluding the one you don't want).
SELECT
col1
, col2
, col3
, col..
, col53
FROM table
I agree with the "simple" solution of listing all the columns, but this can be burdensome, and typos can cause lots of wasted time. I use a function "getTableColumns" to retrieve the names of my columns suitable for pasting into a query. Then all I need to do is to delete those I don't want.
CREATE FUNCTION `getTableColumns`(tablename varchar(100))
RETURNS varchar(5000) CHARSET latin1
BEGIN
DECLARE done INT DEFAULT 0;
DECLARE res VARCHAR(5000) DEFAULT "";
DECLARE col VARCHAR(200);
DECLARE cur1 CURSOR FOR
select COLUMN_NAME from information_schema.columns
where TABLE_NAME=#table AND TABLE_SCHEMA="yourdatabase" ORDER BY ORDINAL_POSITION;
DECLARE CONTINUE HANDLER FOR NOT FOUND SET done = 1;
OPEN cur1;
REPEAT
FETCH cur1 INTO col;
IF NOT done THEN
set res = CONCAT(res,IF(LENGTH(res)>0,",",""),col);
END IF;
UNTIL done END REPEAT;
CLOSE cur1;
RETURN res;
Your result returns a comma delimited string, for example...
col1,col2,col3,col4,...col53
I agree that it isn't sufficient to Select *, if that one you don't need, as mentioned elsewhere, is a BLOB, you don't want to have that overhead creep in.
I would create a view with the required data, then you can Select * in comfort --if the database software supports them. Else, put the huge data in another table.
At first I thought you could use regular expressions, but as I've been reading the MYSQL docs it seems you can't. If I were you I would use another language (such as PHP) to generate a list of columns you want to get, store it as a string and then use that to generate the SQL.
Based on #Mahomedalid answer, I have done some improvements to support "select all columns except some in mysql"
SET #database = 'database_name';
SET #tablename = 'table_name';
SET #cols2delete = 'col1,col2,col3';
SET #sql = CONCAT(
'SELECT ',
(
SELECT GROUP_CONCAT( IF(FIND_IN_SET(COLUMN_NAME, #cols2delete), NULL, COLUMN_NAME ) )
FROM INFORMATION_SCHEMA.COLUMNS WHERE TABLE_NAME = #tablename AND TABLE_SCHEMA = #database
),
' FROM ',
#tablename);
SELECT #sql;
If you do have a lots of cols, use this sql to change group_concat_max_len
SET ##group_concat_max_len = 2048;
I agree with #Mahomedalid's answer, but I didn't want to do something like a prepared statement and I didn't want to type all the fields, so what I had was a silly solution.
Go to the table in phpmyadmin->sql->select, it dumps the query: copy, replace and done! :)
While I agree with Thomas' answer (+1 ;)), I'd like to add the caveat that I'll assume the column that you don't want contains hardly any data. If it contains enormous amounts of text, xml or binary blobs, then take the time to select each column individually. Your performance will suffer otherwise. Cheers!
Just do
SELECT * FROM table WHERE whatever
Then drop the column in you favourite programming language: php
while (($data = mysql_fetch_array($result, MYSQL_ASSOC)) !== FALSE) {
unset($data["id"]);
foreach ($data as $k => $v) {
echo"$v,";
}
}
The answer posted by Mahomedalid has a small problem:
Inside replace function code was replacing "<columns_to_delete>," by "", this replacement has a problem if the field to replace is the last one in the concat string due to the last one doesn't have the char comma "," and is not removed from the string.
My proposal:
SET #sql = CONCAT('SELECT ', (SELECT REPLACE(GROUP_CONCAT(COLUMN_NAME),
'<columns_to_delete>', '\'FIELD_REMOVED\'')
FROM INFORMATION_SCHEMA.COLUMNS
WHERE TABLE_NAME = '<table>'
AND TABLE_SCHEMA = '<database>'), ' FROM <table>');
Replacing <table>, <database> and `
The column removed is replaced by the string "FIELD_REMOVED" in my case this works because I was trying to safe memory. (The field I was removing is a BLOB of around 1MB)
You can use SQL to generate SQL if you like and evaluate the SQL it produces. This is a general solution as it extracts the column names from the information schema. Here is an example from the Unix command line.
Substituting
MYSQL with your mysql command
TABLE with the table name
EXCLUDEDFIELD with excluded field name
echo $(echo 'select concat("select ", group_concat(column_name) , " from TABLE") from information_schema.columns where table_name="TABLE" and column_name != "EXCLUDEDFIELD" group by "t"' | MYSQL | tail -n 1) | MYSQL
You will really only need to extract the column names in this way only once to construct the column list excluded that column, and then just use the query you have constructed.
So something like:
column_list=$(echo 'select group_concat(column_name) from information_schema.columns where table_name="TABLE" and column_name != "EXCLUDEDFIELD" group by "t"' | MYSQL | tail -n 1)
Now you can reuse the $column_list string in queries you construct.
I wanted this too so I created a function instead.
public function getColsExcept($table,$remove){
$res =mysql_query("SHOW COLUMNS FROM $table");
while($arr = mysql_fetch_assoc($res)){
$cols[] = $arr['Field'];
}
if(is_array($remove)){
$newCols = array_diff($cols,$remove);
return "`".implode("`,`",$newCols)."`";
}else{
$length = count($cols);
for($i=0;$i<$length;$i++){
if($cols[$i] == $remove)
unset($cols[$i]);
}
return "`".implode("`,`",$cols)."`";
}
}
So how it works is that you enter the table, then a column you don't want or as in an array: array("id","name","whatevercolumn")
So in select you could use it like this:
mysql_query("SELECT ".$db->getColsExcept('table',array('id','bigtextcolumn'))." FROM table");
or
mysql_query("SELECT ".$db->getColsExcept('table','bigtextcolumn')." FROM table");
May be I have a solution to Jan Koritak's pointed out discrepancy
SELECT CONCAT('SELECT ',
( SELECT GROUP_CONCAT(t.col)
FROM
(
SELECT CASE
WHEN COLUMN_NAME = 'eid' THEN NULL
ELSE COLUMN_NAME
END AS col
FROM INFORMATION_SCHEMA.COLUMNS
WHERE TABLE_NAME = 'employee' AND TABLE_SCHEMA = 'test'
) t
WHERE t.col IS NOT NULL) ,
' FROM employee' );
Table :
SELECT table_name,column_name
FROM INFORMATION_SCHEMA.COLUMNS
WHERE TABLE_NAME = 'employee' AND TABLE_SCHEMA = 'test'
================================
table_name column_name
employee eid
employee name_eid
employee sal
================================
Query Result:
'SELECT name_eid,sal FROM employee'
I use this work around although it may be "Off topic" - using mysql workbench and the query builder -
Open the columns view
Shift select all the columns you want in your query (in your case all but one which is what i do)
Right click and select send to SQL Editor-> name short.
Now you have the list and you can then copy paste the query to where ever.
If it's always the same one column, then you can create a view that doesn't have it in it.
Otherwise, no I don't think so.
I would like to add another point of view in order to solve this problem, specially if you have a small number of columns to remove.
You could use a DB tool like MySQL Workbench in order to generate the select statement for you, so you just have to manually remove those columns for the generated statement and copy it to your SQL script.
In MySQL Workbench the way to generate it is:
Right click on the table -> send to Sql Editor -> Select All Statement.
The accepted answer has several shortcomings.
It fails where the table or column names requires backticks
It fails if the column you want to omit is last in the list
It requires listing the table name twice (once for the select and another for the query text) which is redundant and unnecessary
It can potentially return column names in the wrong order
All of these issues can be overcome by simply including backticks in the SEPARATOR for your GROUP_CONCAT and using a WHERE condition instead of REPLACE(). For my purposes (and I imagine many others') I wanted the column names returned in the same order that they appear in the table itself. To achieve this, here we use an explicit ORDER BY clause inside of the GROUP_CONCAT() function:
SELECT CONCAT(
'SELECT `',
GROUP_CONCAT(COLUMN_NAME ORDER BY `ORDINAL_POSITION` SEPARATOR '`,`'),
'` FROM `',
`TABLE_SCHEMA`,
'`.`',
TABLE_NAME,
'`;'
)
FROM INFORMATION_SCHEMA.COLUMNS
WHERE `TABLE_SCHEMA` = 'my_database'
AND `TABLE_NAME` = 'my_table'
AND `COLUMN_NAME` != 'column_to_omit';
I have a suggestion but not a solution.
If some of your columns have a larger data sets then you should try with following
SELECT *, LEFT(col1, 0) AS col1, LEFT(col2, 0) as col2 FROM table
If you use MySQL Workbench you can right-click your table and click Send to sql editor and then Select All Statement This will create an statement where all fields are listed, like this:
SELECT `purchase_history`.`id`,
`purchase_history`.`user_id`,
`purchase_history`.`deleted_at`
FROM `fs_normal_run_2`.`purchase_history`;
SELECT * FROM fs_normal_run_2.purchase_history;
Now you can just remove those that you dont want.