Ok I am a total beginner with the Solaris Operating system and I need to install and configure samba on 3 boxes each has a different version of Solaris (8,9,10).
What I want to know location of samba configuration file i.e., smb.conf files in each version? So far all I have found is
Solaris 8
/usr/local/samba/lib/smb.conf
Solaris 9 and Solaris 10
/etc/sfw/samba/smb.conf
Is this right? I need to know where these files go by default when samba is installed.
Samba configuration files can be set anywhere your administrator want you to have them.
/usr/local/samba/ is the path where samba can be installed.
smb.conf is one of the configuration files, along with private/secrets.tdb or username.map
You can launch your samba with a:
smbd -D -s /myPath/smb.conf
The two locations (samba installation and samba configuration paths) can be completely separate.
-D If specified, this parameter causes the server to operate as a daemon. That is, it detaches itself and runs in the background, fielding requests on the appropriate port. Operating the server as a daemon is the recommended way of running smbd for servers that provide more than casual use file and print services. This switch is assumed if smbd is executed on the command line of a shell.
-s <configuration file>
The file specified contains the configuration details required by the server. The information in this file includes server-specific information such as what printcap file to use, as well as descriptions of all the services that the server is to provide.
The FILES section of the manpage for `smbd' may give some hints. I don't have any Solaris box handy, so cannot unfortunately confirm.
you can do also the test parameter commands like this # testparm /etc/samba/smb.conf
Related
Where is the Openshift Master and Node Host Files in v4.6
Previously hosted below in v3
Master host files at /etc/origin/master/master-config.yaml
Node host files at /etc/origin/node/node-config.yaml
You can check your current kubelet configuration using the following procedures instead of the configuration file on the node hosts like OCPv3. Because the kubelet configuration was managed dynamically as of OCPv4.
Further information is here, Generating a file that contains the current configuration.
You can check it using above reference procedures(Generate the configuration file) or oc CLI as follows.
$ oc get --raw /api/v1/nodes/${NODE_NAME}/proxy/configz | \
jq '.kubeletconfig|.kind="KubeletConfiguration"|.apiVersion="kubelet.config.k8s.io/v1beta1"'
These files no longer exist in the same for as in OCP 3. To change anything on the machines themselves, you'll need to create MachineConfigs, as CoreOS is an immutable Operating System. If you change anything manually on the filesystem and reboot the machine, your changes will typically be reset.
To modify Worker Nodes, often the setting you are looking for can be configured via a kubeletConfig: Managing nodes - Modifying Nodes. Note that only certain settings can be changed, others cannot be changed at all.
For the Master Config, it depends on what you want to do, as you will potentially change the setting via a machineConfigPool or for example edit API Server setting via oc edit apiserver cluster. So it depends on what you actually want to change.
I wanted to disable some options in the MySql server strict mode, but for some reason I'm not even able to find its configuration file (my.cnf)
Currently installed MySql:
Ver 14.14 Distrib 5.7.20, for macos10.12 (x86_64)
Output generated by
mysql --help
Default options are read from the following files in the given order:
/etc/my.cnf
/etc/mysql/my.cnf
/usr/local/mysql/etc/my.cnf
~/.my.cnf
But there is no such file as my.conf
I had done some research work on SO but none of the advises has worked for me.
What I'm supposed to do?
There are defaults built into MySQL. The configuration file(s), if any, override the defaults.
Note that the config files are not looked at except during startup. So, editing or creating such a file has no effect until you restart mysqld.
If you mess up the syntax, mysqld will not start. Then you need to find the error, either during startup, or in a log file. (Or you could ask here "what is my syntax error".)
As for the location, and name, of the config files that will be used:
$ mysql --help
gives you the list for mysql, but perhaps you need it for the server, so try
$ mysqld --help --verbose
gives you long output; maybe 50 lines from the top, you should see something like:
Usage: mysqld [OPTIONS]
Default options are read from the following files in the given order:
/etc/my.cnf /etc/mysql/my.cnf /usr/etc/my.cnf ~/.my.cnf
You asked about my.conf; was that a typo?
Regardless, If those files are missing, you can create them, make them readable by mysql, and put things into it preceded by [mysqld] so that the server will see them.
Personal override
Regardless of what is in the defaults and/or config files, you can add to the last file given. In the examples above that is 'hidden' .my.cnf in your home directory. All you need to do is create a few lines:
[mysql]
some_setting = somevalue
[client]
some_setting = somevalue
That helps for the "mysql" commandline tool and/or other clients (maybe).
But if you need to make changes to the server mysqld, it needs to be in one of the other files. Again, the minimum is something like
[mysqld]
some_setting = somevalue
Note the mysqld to refer to the server. And remember to restart the service.
Another note: If you see (in an existing config file), !includedir ..., then go to that directory to find any number of further files. You could add your own file, say z.cnf (so it would be picked last) with the two (or more) lines as indicated above.
If you have installed Mysql 8 or Above using the package installer from mysql website, then follow what i did
Create the config file in your home directory vim ~/.my.cnf
Do open System preferences in mac
Then Select the configuration file you created on the option.
The content in this website says.
I had the urgent need to configure some specific stuff in MySQL 5.7 on my developer machine, a MacBook Pro running Mac OS Sierra. Unfortunately, I did not find a my.cnf file that could be customized anywhere?
Internet research showed that MySQL Database Server on Mac OS runs without a my.cnf config file by default, simply started with default values.
Luckily, it is pretty simple to customize the MySQL Server installation by creating and editing a custom my.cnf file like this:
sudo cp /usr/local/mysql/support-files/my-default.cnf /etc/my.cnf
Then edit / customize the /etc/my.cnf file as required and restart your MySQL Server.
Or you can refer to this answer
You could try:
$ locate mysql | grep my.cnf
It should reveal the location(s) if it exists.
This question already has answers here:
Best lightweight web server (only static content) for Windows [closed]
(8 answers)
Closed 8 years ago.
What is the simplest way to host an HTML page over LAN?
I literally just need to have like 5 lines of HTML, so I don't want to download and setup an Apache server. I just want to know the fastest/simplest way to do this on Windows, or I can also use one of my Linux virtual machines if it's faster.
Use netcat, or nc:
:top
nc -l -p 80 -q 1 < index.html
goto top
It's a simple binary without any installation. It doesn't do CGI or PHP or anything, but it can sure dish up 5 lines of HTML.
Actually, if you use the "k" (keep-alive) option you can remove the loop, and make it simpler:
nc -kl 80 < index.html
Since you need a web server for testing and no heavy concurrent use is expected, I'll just keep it simple.
Please note that both solutions are very simple but not very secure, use them for development purposes but don't rely on neither of them for anything barely similar to a stable (people would say "production") server.
Navigate to the directory where your HTML file is located using cmd.exe, then issue:
Using Python
python -m SimpleHTTPServer
A HTTP server will be started on port 8000. Should you need a different port, just specify it:
python -m SimpleHTTPServer 8080
SimpleHTTPServer is part of the "batteries included": you will not need to install any extra package, apart from the Python interpreter, of course.
Python comes already installed on most Linux distributions, so switching to Linux might be simpler than install Python on Windows, although that boils down to downloading and running an installer.
Using PHP 5.4 or above
php -S 0.0.0.0:8080
This will also process PHP scripts, but HTML resources will be served fine.
http://www.lighttpd.net/ is pretty light weight and easy to get running.
I recently used mongoose for a similar purpose. It supports Windows. From the homepage:
Mongoose executable does not depend on any external library or
configuration. If it is copied to any directory and executed, it
starts to serve that directory on port 8080. If some additional config
is required - for example, different listening port or IP-based access
control, then a mongoose.conf file with respective options (see
example) can be created in the same directory where executable lives.
This makes Mongoose perfect for all sorts of demos, quick tests, file
sharing, and Web programming.
Download the windows exe (no need to install) from here , save it on the folder where your html file is and execute it. Check the image below to know how to start the server:
After selecting Start Browser on Port 8080 your browser will open automatically displaying the contents of the folder.
I have the hgeclipse plugin installed and I have a url source to go and clone from for a project that I need to begin work on. The authentication is based on ssh and my ssh key. I understand from basic googling that I need to set up a .hgr file with the path to the private. Can some one give me more pointers
Actually, you can include the path to the key in your Mercurial.ini/.hrgc file. You don't need Pageant or ssh-agent, unless you need to log in to multiple servers. If you're only ever logging in to one server, you can make your Mercurial.ini or .hgrc file have the following content:
[ui]
ssh = "TortoisePlink.exe" -ssh -2 -i "C:\Users\username\username_rsa.ppk"
This code is Windows-specific but basically, you just specify the path to the ssh program, use the -i flag and specify the path to the private key. That formula should work on all operating systems. If you're on Windows, you put that stuff in a file called "Mercurial.ini" and if you're on any other platform, it goes in a file called .hgrc
Hope this helps!
The private key must be added to ssh and not mercurial / hgrc.
You have to configure your ssh client to use your private key, but this depends greatly on the system you're using.
If you're on linux or mac os x, google some informations about using ssh-agent on your distribution.
If you're on Windows, you can use pageant for example.
I use GVIM on Ubuntu 9.10. I'm looking for the right way to configure GVIM to be able to edit remote files (HTML, PHP, CSS) by for exemple ftp.
When i use :e scp://username#remotehost/./path/to/file i get: error detected while processing BufEnter Auto commands for "*":E472: Command failed.
When i open a file on remote via Dolphin or Nautilus, i cannot use other files with NERDTree.
Finally when i edit on remote a file via Dolphin the rights are changing to access interdit.
So how to use GVIM to edit remote files like on my localhost?
I've found running the filesystem over ssh (by means of sshfs) a better option than having the editor handle that stuff or running the editor itself over an ssh tunnel.
So you need to
apt-get install sshfs
and then
sshfs remoteuser#remotehost:/remote/path /local/mountpoint
And that will let you edit your remote files as if they were on your local file system.
To make it even smoother you can add a line to /etc/fstab
sshfs#remoteusername#remotehost:/remote/path /local/mountpoint fuse user,noauto
For some reason I find that I have to use fusermount -u /local/mountpoint rather then just umount /local/mountpoint when experimenting with this. Maybe that's just my distro.
Recently I've also noted that the mounting user must be in the fuse group. So:
sudo addgroup <username> fuse
An other popular option of course, would be to run vim (rather then gvim) inside a GNU Screen session on one machine and connect to that session via ssh from wherever you happen to be. Code along all day at work and in the evening you ssh into your office computer, reattach to your gnu screen session and pick up exactly where you left off. I used find the richer color palette to be the only thing I really missed from gvim when using vim, but that can actually be fixed thanks to a fork of urxvt that will let you customize the entire 256 position color palette, not just the 16 first positions of the palette that most terminal emulators will let you customize.
There is one way and that is using the remote host's copy, using SSH to forward the X11 client to you, like so:
user#local:~/$ ssh -X user#host
...
user#host:~/$ gvim file
The latter command should open gvim on your desktop. Of course, this relies on the remote host having X11 / gnome / gvim installed in the first place, which might not be the solution you're looking for / an option in your case.
Note: X11 forwarding can be a security risk.
In order for netrw to work seamlessly, I believe you need to not be in compatibility mode.
Try
:set nocompatible
then
:edit scp://host/path/to/file
Try this
:e scp://username#remotehost//path/to/file
Note that the use of // is intentional after remotehost it gives the absolute path of your file
:)
http://www.celsius1414.com/2009/08/19/how-to-edit-remote-files-with-local-vim/
The vim tips wiki has an article on this, Editing remote files via scp in vim.
EDIT: Key authentication is not necessary for opening files over ssh. Vim will prompt for password.
It would be useful to note if netrw.vim was loaded by vim when it started.
:echo exists("g:loaded_netrwPlugin")
For opening files over ssh, you need your local machine's public key in the server's authorized keys. Following help section in vim documentation explains it pretty well.
:help netrw-ssh-hack
Quick way to export public key would be by using ssh-copy-id (if available).
ssh-copy-id user#host
And have a look at netrw documentation for network file editing over other protocols.
:help netrw
HTH.
According to the docs BufEnter is processed after the file has been read and the buffer created, so my guess is that netrw successfully read the file but you have a plugin that assumes the file is on the local filesystem and is trying to access it, e.g. to run ctags.
Try disabling all your plugin scripts except the default Vim ones, and then editing the file.
Also, try editing a directory to see if netrw can read that - you need to put the / on the end so that netrw knows it is a dir.
About your command, :e scp://username#remotehost/./path/to/file : note that with netrw, scp is taken relative to your home directory on that remote host. To avoid home-relative pathing, drop that "."; ie. :e scp://username#remotehost//path/to/file .
to accomplish this on windows download/install the Dokan library and Dokan SSHFS, which are the first and last links on this page.
I didn't think you were going to be able to directly edit a remote file using GVIM running locally. However, as others have pointed out, this is defintiely possible. This looks very interesting; I will check this out. I will leave the rest of my post up here, in case it is useful to anyone else, as an alternative method. This method will work even if you don't have SSH access to the file (ie, you only have FTP, or S3, or whatever).
You may get that effect, though, by tying GVIM into a graphical file transfer application. For example, on OS X, I use CyberDuck to transfer files (FTP, SFTP, etc). Then, I have it configured to use GVIM as my editor, so I can just double-click on a file in the remote listing, and CyberDuck will download a copy of that remote file, and open it in GVIM. When I save it in GVIM, CyberDuck uploads the file back to the remote host.
I'm sure that this functionality is not unique to CyberDuck, and is probably present in most nicer file transfer utilities.