Related
SCENARIO
ALTER TABLE {TABLE NAME} AUTO_INCREMENT = 1;
INSERT INTO {TABLE NAME} ({COLUMN}) VALUES (1);
(this is only record in table after auto increment was updated)
SELECT AUTO_INCREMENT FROM information_schema.TABLES
WHERE TABLE_SCHEMA = {DATABASE NAME}
AND TABLE_NAME = {TABLE NAME};
the last select auto_increment is returning the old value before execution alter table in step 1) and I don't understand why and hot to fix it or maybe alter table in step 1) is not correct way to reset auto_increment.
THX
PS. I know a bit but not everything. I was researching this problem and didn't find satisfactory/explanatory answer.
The INFORMATION_SCHEMA doesn't update to reflect recent alterations. MySQL 8.0 changed it so it only updates once every 24 hours.
You can set this:
SET GLOBAL information_schema_stats_expiry=0;
That will make INFORMATION_SCHEMA update immediately, at the cost of some overhead on your system.
I had the issue where the information schema wasn't being immediately updated.
To fix this I ran:
SET PERSIST information_schema_stats_expiry = 0;
As using SET GLOBAL didn't work for me.
Hope this helps somebody else.
I guess you must set AUTO_INCREMENT = 1 not 0
How can I reset the AUTO_INCREMENT of a field?
I want it to start counting from 1 again.
You can reset the counter with:
ALTER TABLE tablename AUTO_INCREMENT = 1
For InnoDB you cannot set the auto_increment value lower or equal to the highest current index. (quote from ViralPatel):
Note that you cannot reset the counter to a value less than or equal
to any that have already been used. For MyISAM, if the value is less
than or equal to the maximum value currently in the AUTO_INCREMENT
column, the value is reset to the current maximum plus one. For
InnoDB, if the value is less than the current maximum value in the
column, no error occurs and the current sequence value is not changed.
See How can I reset an MySQL AutoIncrement using a MAX value from another table? on how to dynamically get an acceptable value.
SET #num := 0;
UPDATE your_table SET id = #num := (#num+1);
ALTER TABLE your_table AUTO_INCREMENT =1;
Simply like this:
ALTER TABLE tablename AUTO_INCREMENT = value;
Reference: 13.1.9 ALTER TABLE Statement
There is a very easy way with phpMyAdmin under the "operations" tab. In the table options you can set autoincrement to the number you want.
The best solution that worked for me:
ALTER TABLE my_table MODIFY COLUMN ID INT(10) UNSIGNED;
COMMIT;
ALTER TABLE my_table MODIFY COLUMN ID INT(10) UNSIGNED AUTO_INCREMENT;
COMMIT;
It's fast, works with InnoDB, and I don't need to know the current maximum value!
This way. the auto increment counter will reset and it will start automatically from the maximum value exists.
The highest rated answers to this question all recommend "ALTER yourtable AUTO_INCREMENT= value". However, this only works when value in the alter is greater than the current max value of the autoincrement column. According to the MySQL 8 documentation:
You cannot reset the counter to a value less than or equal to the value that is currently in use. For both InnoDB and MyISAM, if the value is less than or equal to the maximum value currently in the AUTO_INCREMENT column, the value is reset to the current maximum AUTO_INCREMENT column value plus one.
In essence, you can only alter AUTO_INCREMENT to increase the value of the autoincrement column, not reset it to 1, as the OP asks in the second part of the question. For options that actually allow you set the AUTO_INCREMENT downward from its current max, take a look at Reorder / reset auto increment primary key.
As of MySQL 5.6 you can use the simple ALTER TABLE with InnoDB:
ALTER TABLE tablename AUTO_INCREMENT = 1;
The documentation are updated to reflect this:
13.1.7 ALTER TABLE Statement
My testing also shows that the table is not copied. The value is simply changed.
Beware! TRUNCATE TABLE your_table will delete everything in your your_table.
You can also use the syntax TRUNCATE table like this:
TRUNCATE TABLE table_name
ALTER TABLE news_feed DROP id
ALTER TABLE news_feed ADD id BIGINT( 200 ) NOT NULL AUTO_INCREMENT FIRST ,ADD PRIMARY KEY (id)
I used this in some of my scripts. The id field is dropped and then added back with previous settings. All the existent fields within the database table are filled in with the new auto increment values. This should also work with InnoDB.
Note that all the fields within the table will be recounted and will have other ids!!!.
It is for an empty table:
ALTER TABLE `table_name` AUTO_INCREMENT = 1;
If you have data, but you want to tidy up it, I recommend to use this:
ALTER TABLE `table_name` DROP `auto_colmn`;
ALTER TABLE `table_name` ADD `auto_colmn` INT( {many you want} ) NOT NULL AUTO_INCREMENT FIRST ,ADD PRIMARY KEY (`auto_colmn`);
To update to the latest plus one id:
ALTER TABLE table_name AUTO_INCREMENT =
(SELECT (id+1) id FROM table_name order by id desc limit 1);
Edit:
SET #latestId = SELECT MAX(id) FROM table_name;
SET #nextId = #latestId + 1;
ALTER TABLE table_name AUTO_INCREMENT = #nextId;
Not tested please test before you run*
Warning: If your column has constraints or is connected as a foreign key to other tables this will have bad effects.
First, drop the column:
ALTER TABLE tbl_name DROP COLUMN column_id
Next, recreate the column and set it as FIRST (if you want it as the first column I assume):
ALTER TABLE tbl_access ADD COLUMN `access_id` int(10) NOT NULL PRIMARY KEY AUTO_INCREMENT FIRST
As of MySQL 5.6 the approach below works faster due to online DDL (note algorithm=inplace):
alter table tablename auto_increment=1, algorithm=inplace;
SET #num := 0;
UPDATE your_table SET id = #num := (#num+1);
ALTER TABLE your_table AUTO_INCREMENT =1;
ALTER TABLE tablename AUTO_INCREMENT = 1
Try to run this query:
ALTER TABLE tablename AUTO_INCREMENT = value;
Or try this query for the reset auto increment
ALTER TABLE `tablename` CHANGE `id` `id` INT(10) UNSIGNED NOT NULL;
And set auto increment and then run this query:
ALTER TABLE `tablename` CHANGE `id` `id` INT(10) UNSIGNED NOT NULL AUTO_INCREMENT;
The auto-increment counter for a table can be (re)set in two ways:
By executing a query, like others already explained:
ALTER TABLE <table_name> AUTO_INCREMENT=<table_id>;
Using Workbench or another visual database design tool. I am going to show in Workbench how it is done - but it shouldn't be much different in other tools as well. By right clicking over the desired table and choosing Alter table from the context menu. On the bottom you can see all the available options for altering a table. Choose Options and you will get this form:
Then just set the desired value in the field Auto increment as shown in the image. This will basically execute the query shown in the first option.
If you're using PHPStorm's database tool you have to enter this in the database console:
ALTER TABLE <table_name> AUTO_INCREMENT = 0;
I tried to alter the table and set auto_increment to 1 but it did not work. I resolved to delete the column name I was incrementing, then create a new column with your preferred name and set that new column to increment from the onset.
I googled and found this question, but the answer I am really looking for fulfils two criteria:
using purely MySQL queries
reset an existing table auto-increment to max(id) + 1
Since I couldn't find exactly what I want here, I have cobbled the answer from various answers and sharing it here.
Few things to note:
the table in question is InnoDB
the table uses the field id with type as int as primary key
the only way to do this purely in MySQL is to use stored procedure
my images below are using SequelPro as the GUI. You should be able to adapt it based on your preferred MySQL editor
I have tested this on MySQL Ver 14.14 Distrib 5.5.61, for debian-linux-gnu
Step 1: Create Stored Procedure
create a stored procedure like this:
DELIMITER //
CREATE PROCEDURE reset_autoincrement(IN tablename varchar(200))
BEGIN
SET #get_next_inc = CONCAT('SELECT #next_inc := max(id) + 1 FROM ',tablename,';');
PREPARE stmt FROM #get_next_inc;
EXECUTE stmt;
SELECT #next_inc AS result;
DEALLOCATE PREPARE stmt;
set #alter_statement = concat('ALTER TABLE ', tablename, ' AUTO_INCREMENT = ', #next_inc, ';');
PREPARE stmt FROM #alter_statement;
EXECUTE stmt;
DEALLOCATE PREPARE stmt;
END //
DELIMITER ;
Then run it.
Before run, it looks like this when you look under Stored Procedures in your database.
When I run, I simply select the stored procedure and press Run Selection
Note: the delimiters part are crucial. Hence if you copy and paste from the top selected answers in this question, they tend not to work for this reason.
After I run, I should see the stored procedure
If you need to change the stored procedure, you need to delete the stored procedure, then select to run again.
Step 2: Call the stored procedure
This time you can simply use normal MySQL queries.
call reset_autoincrement('products');
Originally from my own SQL queries notes in https://simkimsia.com/reset-mysql-autoincrement-to-max-id-plus-1/ and adapted for Stack Overflow.
delete from url_rewrite where 1=1;
ALTER TABLE url_rewrite AUTO_INCREMENT = 1;
and then reindex
ALTER TABLE `table_name` DROP `id`;
ALTER TABLE `table_name` ADD `id` INT NOT NULL AUTO_INCREMENT FIRST, ADD PRIMARY KEY (`id`) ;
Shortly,First we deleted id column then added it with primary key id again...
The best way is remove the field with AI and add it again with AI. It works for all tables.
You need to follow the advice from Miles M's comment and here is some PHP code that fixes the range in MySQL. Also you need to open up the my.ini file (MySQL) and change max_execution_time=60 to max_execution_time=6000; for large databases.
Don’t use "ALTER TABLE tablename AUTO_INCREMENT = 1". It will delete everything in your database.
$con = mysqli_connect($dbhost, $dbuser, $dbpass, $database);
$res = mysqli_query($con, "select * FROM data WHERE id LIKE id ORDER BY id ASC");
$count = 0;
while ($row = mysqli_fetch_array($res)){
$count++;
mysqli_query($con, "UPDATE data SET id='".$count."' WHERE id='".$row['id']."'");
}
echo 'Done reseting id';
mysqli_close($con);
I suggest you to go to Query Browser and do the following:
Go to schemata and find the table you want to alter.
Right click and select copy create statement.
Open a result tab and paste the create statement their.
Go to the last line of the create statement and look for the Auto_Increment=N,
(Where N is a current number for auto_increment field.)
Replace N with 1.
Press Ctrl + Enter.
Auto_increment should reset to one once you enter a new row in the table.
I don't know what will happen if you try to add a row where an auto_increment field value already exist.
I'm rather new to fiddling around in SQL and MySQL, although I stumbled upon this problem. I'm trying to get a number of how many rows are there in one table and set this number onto anothers AUTO_INCREMENT value. The problem is, MySQL workbench triggers a syntax error when I try to assign value via a variable. I tried to convert the query to unsigned integer, although not sure if it did work. Query for row amount returns the required number. What am I doing wrong?
SET #size = CONVERT((SELECT TABLE_ROWS FROM information_schema.tables WHERE table_name='Persons' and table_schema = 'Movies2'), unsigned);
ALTER TABLE Movies2.Actors AUTO_INCREMENT=#size;
The following should work:
ALTER TABLE Movies2.Actors AUTO_INCREMENT = (SELECT COUNT(*) FROM Movies2.Persons);
I need to delete all rows from a table but when I add a new row, I want the primary key ID, which has an auto increment, to start again from 0 respectively from 1.
Do not delete, use truncate:
Truncate table XXX
The table handler does not remember the last used AUTO_INCREMENT value, but starts counting from the beginning. This is true even for MyISAM and InnoDB, which normally do not reuse sequence values.
Source.
If you cannot use TRUNCATE (e.g. because of foreign key constraints) you can use an alter table after deleting all rows to restart the auto_increment:
ALTER TABLE mytable AUTO_INCREMENT = 1
If table has foreign keys then I always use following code:
SET FOREIGN_KEY_CHECKS = 0; -- disable a foreign keys check
SET AUTOCOMMIT = 0; -- disable autocommit
START TRANSACTION; -- begin transaction
/*
DELETE FROM table_name;
ALTER TABLE table_name AUTO_INCREMENT = 1;
-- or
TRUNCATE table_name;
-- or
DROP TABLE table_name;
CREATE TABLE table_name ( ... );
*/
SET FOREIGN_KEY_CHECKS = 1; -- enable a foreign keys check
COMMIT; -- make a commit
SET AUTOCOMMIT = 1 ;
But difference will be in execution time. Look at above Sorin's answer.
if you want to use truncate use this:
SET FOREIGN_KEY_CHECKS = 0;
TRUNCATE table $table_name;
SET FOREIGN_KEY_CHECKS = 1;
An interesting fact.
I was sure TRUNCATE will always perform better, but in my case, for a database with approximately 30 tables with foreign keys, populated with only a few rows, it took about 12 seconds to TRUNCATE all tables, as opposed to only a few hundred milliseconds to DELETE the rows.
Setting the auto increment adds about a second in total, but it's still a lot better.
So I would suggest try both, see which works faster for your case.
How can I reset the AUTO_INCREMENT of a field?
I want it to start counting from 1 again.
You can reset the counter with:
ALTER TABLE tablename AUTO_INCREMENT = 1
For InnoDB you cannot set the auto_increment value lower or equal to the highest current index. (quote from ViralPatel):
Note that you cannot reset the counter to a value less than or equal
to any that have already been used. For MyISAM, if the value is less
than or equal to the maximum value currently in the AUTO_INCREMENT
column, the value is reset to the current maximum plus one. For
InnoDB, if the value is less than the current maximum value in the
column, no error occurs and the current sequence value is not changed.
See How can I reset an MySQL AutoIncrement using a MAX value from another table? on how to dynamically get an acceptable value.
SET #num := 0;
UPDATE your_table SET id = #num := (#num+1);
ALTER TABLE your_table AUTO_INCREMENT =1;
Simply like this:
ALTER TABLE tablename AUTO_INCREMENT = value;
Reference: 13.1.9 ALTER TABLE Statement
There is a very easy way with phpMyAdmin under the "operations" tab. In the table options you can set autoincrement to the number you want.
The best solution that worked for me:
ALTER TABLE my_table MODIFY COLUMN ID INT(10) UNSIGNED;
COMMIT;
ALTER TABLE my_table MODIFY COLUMN ID INT(10) UNSIGNED AUTO_INCREMENT;
COMMIT;
It's fast, works with InnoDB, and I don't need to know the current maximum value!
This way. the auto increment counter will reset and it will start automatically from the maximum value exists.
The highest rated answers to this question all recommend "ALTER yourtable AUTO_INCREMENT= value". However, this only works when value in the alter is greater than the current max value of the autoincrement column. According to the MySQL 8 documentation:
You cannot reset the counter to a value less than or equal to the value that is currently in use. For both InnoDB and MyISAM, if the value is less than or equal to the maximum value currently in the AUTO_INCREMENT column, the value is reset to the current maximum AUTO_INCREMENT column value plus one.
In essence, you can only alter AUTO_INCREMENT to increase the value of the autoincrement column, not reset it to 1, as the OP asks in the second part of the question. For options that actually allow you set the AUTO_INCREMENT downward from its current max, take a look at Reorder / reset auto increment primary key.
As of MySQL 5.6 you can use the simple ALTER TABLE with InnoDB:
ALTER TABLE tablename AUTO_INCREMENT = 1;
The documentation are updated to reflect this:
13.1.7 ALTER TABLE Statement
My testing also shows that the table is not copied. The value is simply changed.
Beware! TRUNCATE TABLE your_table will delete everything in your your_table.
You can also use the syntax TRUNCATE table like this:
TRUNCATE TABLE table_name
ALTER TABLE news_feed DROP id
ALTER TABLE news_feed ADD id BIGINT( 200 ) NOT NULL AUTO_INCREMENT FIRST ,ADD PRIMARY KEY (id)
I used this in some of my scripts. The id field is dropped and then added back with previous settings. All the existent fields within the database table are filled in with the new auto increment values. This should also work with InnoDB.
Note that all the fields within the table will be recounted and will have other ids!!!.
It is for an empty table:
ALTER TABLE `table_name` AUTO_INCREMENT = 1;
If you have data, but you want to tidy up it, I recommend to use this:
ALTER TABLE `table_name` DROP `auto_colmn`;
ALTER TABLE `table_name` ADD `auto_colmn` INT( {many you want} ) NOT NULL AUTO_INCREMENT FIRST ,ADD PRIMARY KEY (`auto_colmn`);
To update to the latest plus one id:
ALTER TABLE table_name AUTO_INCREMENT =
(SELECT (id+1) id FROM table_name order by id desc limit 1);
Edit:
SET #latestId = SELECT MAX(id) FROM table_name;
SET #nextId = #latestId + 1;
ALTER TABLE table_name AUTO_INCREMENT = #nextId;
Not tested please test before you run*
Warning: If your column has constraints or is connected as a foreign key to other tables this will have bad effects.
First, drop the column:
ALTER TABLE tbl_name DROP COLUMN column_id
Next, recreate the column and set it as FIRST (if you want it as the first column I assume):
ALTER TABLE tbl_access ADD COLUMN `access_id` int(10) NOT NULL PRIMARY KEY AUTO_INCREMENT FIRST
As of MySQL 5.6 the approach below works faster due to online DDL (note algorithm=inplace):
alter table tablename auto_increment=1, algorithm=inplace;
SET #num := 0;
UPDATE your_table SET id = #num := (#num+1);
ALTER TABLE your_table AUTO_INCREMENT =1;
ALTER TABLE tablename AUTO_INCREMENT = 1
Try to run this query:
ALTER TABLE tablename AUTO_INCREMENT = value;
Or try this query for the reset auto increment
ALTER TABLE `tablename` CHANGE `id` `id` INT(10) UNSIGNED NOT NULL;
And set auto increment and then run this query:
ALTER TABLE `tablename` CHANGE `id` `id` INT(10) UNSIGNED NOT NULL AUTO_INCREMENT;
The auto-increment counter for a table can be (re)set in two ways:
By executing a query, like others already explained:
ALTER TABLE <table_name> AUTO_INCREMENT=<table_id>;
Using Workbench or another visual database design tool. I am going to show in Workbench how it is done - but it shouldn't be much different in other tools as well. By right clicking over the desired table and choosing Alter table from the context menu. On the bottom you can see all the available options for altering a table. Choose Options and you will get this form:
Then just set the desired value in the field Auto increment as shown in the image. This will basically execute the query shown in the first option.
If you're using PHPStorm's database tool you have to enter this in the database console:
ALTER TABLE <table_name> AUTO_INCREMENT = 0;
I tried to alter the table and set auto_increment to 1 but it did not work. I resolved to delete the column name I was incrementing, then create a new column with your preferred name and set that new column to increment from the onset.
I googled and found this question, but the answer I am really looking for fulfils two criteria:
using purely MySQL queries
reset an existing table auto-increment to max(id) + 1
Since I couldn't find exactly what I want here, I have cobbled the answer from various answers and sharing it here.
Few things to note:
the table in question is InnoDB
the table uses the field id with type as int as primary key
the only way to do this purely in MySQL is to use stored procedure
my images below are using SequelPro as the GUI. You should be able to adapt it based on your preferred MySQL editor
I have tested this on MySQL Ver 14.14 Distrib 5.5.61, for debian-linux-gnu
Step 1: Create Stored Procedure
create a stored procedure like this:
DELIMITER //
CREATE PROCEDURE reset_autoincrement(IN tablename varchar(200))
BEGIN
SET #get_next_inc = CONCAT('SELECT #next_inc := max(id) + 1 FROM ',tablename,';');
PREPARE stmt FROM #get_next_inc;
EXECUTE stmt;
SELECT #next_inc AS result;
DEALLOCATE PREPARE stmt;
set #alter_statement = concat('ALTER TABLE ', tablename, ' AUTO_INCREMENT = ', #next_inc, ';');
PREPARE stmt FROM #alter_statement;
EXECUTE stmt;
DEALLOCATE PREPARE stmt;
END //
DELIMITER ;
Then run it.
Before run, it looks like this when you look under Stored Procedures in your database.
When I run, I simply select the stored procedure and press Run Selection
Note: the delimiters part are crucial. Hence if you copy and paste from the top selected answers in this question, they tend not to work for this reason.
After I run, I should see the stored procedure
If you need to change the stored procedure, you need to delete the stored procedure, then select to run again.
Step 2: Call the stored procedure
This time you can simply use normal MySQL queries.
call reset_autoincrement('products');
Originally from my own SQL queries notes in https://simkimsia.com/reset-mysql-autoincrement-to-max-id-plus-1/ and adapted for Stack Overflow.
delete from url_rewrite where 1=1;
ALTER TABLE url_rewrite AUTO_INCREMENT = 1;
and then reindex
ALTER TABLE `table_name` DROP `id`;
ALTER TABLE `table_name` ADD `id` INT NOT NULL AUTO_INCREMENT FIRST, ADD PRIMARY KEY (`id`) ;
Shortly,First we deleted id column then added it with primary key id again...
The best way is remove the field with AI and add it again with AI. It works for all tables.
You need to follow the advice from Miles M's comment and here is some PHP code that fixes the range in MySQL. Also you need to open up the my.ini file (MySQL) and change max_execution_time=60 to max_execution_time=6000; for large databases.
Don’t use "ALTER TABLE tablename AUTO_INCREMENT = 1". It will delete everything in your database.
$con = mysqli_connect($dbhost, $dbuser, $dbpass, $database);
$res = mysqli_query($con, "select * FROM data WHERE id LIKE id ORDER BY id ASC");
$count = 0;
while ($row = mysqli_fetch_array($res)){
$count++;
mysqli_query($con, "UPDATE data SET id='".$count."' WHERE id='".$row['id']."'");
}
echo 'Done reseting id';
mysqli_close($con);
I suggest you to go to Query Browser and do the following:
Go to schemata and find the table you want to alter.
Right click and select copy create statement.
Open a result tab and paste the create statement their.
Go to the last line of the create statement and look for the Auto_Increment=N,
(Where N is a current number for auto_increment field.)
Replace N with 1.
Press Ctrl + Enter.
Auto_increment should reset to one once you enter a new row in the table.
I don't know what will happen if you try to add a row where an auto_increment field value already exist.