I have a small database project where users can attach files to records. Mostly pdf and word docs. I am using the attachment type fields that access provides because I want to get more familiar with them. I have a continuous form that shows the attachment field using the Picture/Symbol view option. Most of the time, but strangely not always, the attachment symbol shows this black background behind its symbol. The black background does not cover the whole field but rather only the picture for the attachment type (Word, PDF etc.). The field itself is set to transparent, which is neccesary for my row highlighting to work. Does anyone know why this is happening? Is it a bug? Some way to fix it? It had worked when I had first set it up but upon restarting my computer and reopening the project they turned black and are now stuck that way. I removed them later for some reason and re-did the whole thing, upon which it seemingly worked but after restarting it went black again. There is no difference between using the view settings Picture/Symbol and Symbol.
Visual Aid:
Update 1:
The black backgrounds are seemingly random. I set the view option to Paperclip, restarted access, then set them to Picture/Symbol again and now I get this:
Closing and opening the file appears to turn the backgrounds black. Changing the view type back and forth inbetween can fix some, but not always.... I'm really not sure what's going on.
Update 2:
The issue is seemingly not affected by transparancy settings. Changing the Background color of the field has no impact either. The issue also persists when making a new form from scratch and adding the Attachment type field to it. It also carries over from one pc to another, so unless both have the same issue in their windows installation I don't think that is the root cause either. Compress & Repair did not help. I am only using one attached file per record.
Update 3:
I have had no luck consistently reproducing the issue. Most of the time, about 80% of it I am estimating, the issue persists. Some days, when launching access, the issue is resolved partially for either the word icon, or the pdf icon. On some days the issue is resolved for all icons as in the picture below. Almost always, after closing and opening access, the issue will immediately reappear for all icons. Closing and opening the form only and keeping the file open is fine, the issue stays resolved. Really not sure how to go about this.
My Access version:
Version 2205 Build 16.0.15225.20028
My Windows install:
Microsoft Windows 10 Pro
10.0.19044 Build 19044
So, updated to windows 11 and the issue is solved. No idea what was wrong exactly but it turns out it was related to the windows install. So, some kind of a bug in Win 10 is my guess, since it was happening on two different machines both running win 10.
Related
I have an HTML table with at most 25 columns (usually 5 or 6) and at most 25 rows. Each cell in the table contains a custom Web Component. These are minimal web components. For example, one wraps a number and you can set number formatting (e.g. format as currency) via the attributes. Another just displays a formatted string, etc. I am adding these components dynamically using appendChild on the td.
These Web Components are all using the Shadow DOM - as recommended in the documentation. So I create this simple table (6 rows and 25 columns) and I populate cells with these Web Components. If I do this in Chrome, my system crashes requiring a reboot (sometimes by forcing a shutdown). I tried this in Firefox, and the table renders in less than a second. Also I tried this in Edge and it crashes there too.
I tried re-doing my Web Components to remove the Shadow DOMs and voila, it works fine in Chrome and Firefox.
I don't want to do these component without the Shadow DOMs. Does anyone have any ideas?
Thanks
Update: this is still a problem. I tested in Edge browser and it does indeed work there (albeit a bit slow). Also tested in Safari/ MacOS and it works there too.
What a shame… I have to tell my users they can’t use Chrome and prevent the page from loading.
Update 9/2/2022: Without any changes to my code it is no longer an issue. The only explanation I have is that it might have been happily addressed by a scheduled Chrome update.
Now however, even though my table loads OK, if I open Developer Tools immediately after the table loads, I get a crash with error: 'Debugging Connection closed. Reason: Render process gone.'
Update 9/4/2022: I was overly optimistic about this error. I started testing my app again in Chrome today and the original problem still exists. I create my table in Chrome, interact with it in various ways (e.g. dynamically add a column, add an icon prefix to cell contents of a column, dynamically add a column with a drop-down menu in each cell, etc.) and eventually Chrome will crash.
I no longer expect this to be fixed. I logged a bug report with chromium.org and that is all I can do.
i'm struggling with the classic HTML input of type file. I was using it on my angular application and i had freeze sometimes, the whole browser became unresponsive, and the only thing that works is the scroll.
You can't click any buttons, select any text or even change tab on the browser for about 5 seconds. I tried a lot of different file type and sizes and it doesn't change any of this, it even freeze sometimes when i don't select any file in the explorer and i click the close button directly.
So I thought it was my implementation that was bad and i went to the Mozilla developper website where you have an example and I have exactly the same behaviour. I also tried to take only the HTML from the Mozilla website and put it alone on a .html file and again, same behaviour.
This does not occur 100% of the time, but I would argue that on my end it does it about 60/70 % of the times.
I tried it on chrome and Firefox (both up to date), on multiple computer (all running Windows though) and i have the same behaviour on all of them.
I don't have any error or anyting in the consoles.
I don't know what to do with this, i'm pretty sure it can't be the file's input on the whole web that are bugged, but i tried a lot of various things with always the same results. Should i report it somewhere? ( if so, where? ) Or what would you suggest to do to investigate this further?
I couldn't find anyone discussing this issue on the internet apart for this thread that had no solution, they also say in this thread that the bug is not reproducible in Edge, but i just tried and it does the same thing.
Thanks for reading me and for any help about this.
Chrome freezes for few seconds when after any use of file field.
It was because I had a shortcut in "Quick Access" menu in windows explorer. This shortcut has been linked with a folder shared by network. I've removed this shortcut and everything is good now.
Same here, I have a mapped network drive that is not responding, this make a 5 seconds delay. After unmapping the drive, no more delay. The delay is the same in firefox or chrome.
Same here, if you want to remove it, on Windows 10, click on the icon Quick access (blue star), then right click on the dead link appearing in the "Frequent folders" panel on the right panel and choose "Unpin/Remove from Quick access". There should be no error message.
I am using OpenRefine to clean text from a CSV file. I've been working on the same project for several weeks, and it was working fine until this week.
I am trying to use the 'Cluster and Edit' function from the 'Edit cells' menu. When I use the 'fingerprint' and 'ngram fingerprint' keying function, the frame that opens up inside the browser window is sized appropriately, and I have access to all the buttons and selection menus. However, when I try to use the 'metaphone3' keying function, the frame that opens up is way wider than the browser window, the sliding selection boxes that usually appear in the right side of the frame are not visible, and the buttons across the bottom of the frame ('Select All', 'Unselect All', etc.) are not available. I'd really like to be able to use this keying function option again. Does anyone know what's going on, or how I might be able to fix it.
I am using the OpenRefine 3.3 beta, although a similar issue was happening earlier this week with all keying function options in 3.2 (all were working fine in 3.2 as recently as Friday, 10/25/2019). I am using Firefox, although the same issue happens in Internet Explorer. The system OS is Windows 10 Enterprise.
Thanks in advance!
Problem
I'm having the problem for days and haven't found anyone else mentioned it..
The issue is that when I set the system dpi scaling to 150% or above, some webpages I open in CHtmlView would be messed up, while using IE or Chrome not causing the same problem.
Context
It seems like in CHtmlView the fonts get bigger than it's needed. I figured out this situation happens if my program's "high DPI-aware" property is set. But I can't turn it off either because the webpage would be blurry.
The strange part is when I tested msdn or google paged in CHtmlView, they neither caused the problem nor scale 150%. They just displayed as the 100% one.
Not sure if I should do something to my program or the webpage. The webpage needed to be displayed in my program is also from my company, so if I know what to set in the webpage I could handle it.
Thank you :)
Edit:
Because the website I'm having problem with is a private site, so I use another page to explain the situation.
Webpage in HtmlView, seem like only fonts get bigger.
Webpage in IE
I'm here as I've got the same problem.
You can create a new VS2017 MFC project, derive a view from CHtmlView, you'll find this in the constructed code
void CMFCApplication4View::OnInitialUpdate()
{
CHtmlView::OnInitialUpdate();
Navigate2(_T("http://www.msdn.microsoft.com/visualc/"),nullptr, nullptr);
}
(Note I had to delete the two trailing nullptr arguments to get it to compile)
My application manifest lists the app as being High DPI Aware and I've got a 200% (192dpi) scaled monitor.
The web page that loads is tiny (unscaled).
zett42's answer (Aug 31 '17 at 14:39) is correct. Add the registry key indicated, using
Computer\HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_BROWSER_EMULATION
MFCApplication4.exe=11001 [your application name here].
Restart the app, hey presto everythin is correctly scaled.
Dunno why I can't upvote zett42.
Got another weird/specific question for y'all: I'm able to do with this with other .swfs just fine, but Ookla's Speedtest is something of a problem. Basically we have a part of our website that runs Speedtest to determine somebody's bandwidth and use its results in some if statements. But when the person tries to change panels and come back in, Speedtest just sort of disappears. It's supposed to go back to the beginning and start again, but it's like it just keeps running and turns invisible.
When I tried loading another .swf in the SWFLoader, I could get it to reset just fine without disappearing. There's something specifically about Ookla's Speedtest that's causing a problem. If I do nothing to reset the Speedtest .swf when the user starts moving around panels, it won't disappear at least. Putting in code to make it reset is a completely different story though.
What's the trick for this program? Did Ookla design the .swf specifically so it wouldn't work like that or something? Thanks!
Evidently Ookla has designed the .swf against being used like that, which is probably costing them customers.