I want to create a replica to my Percona Server with GTID enabled, but got this error when i show slave status:
Last_IO_Error: Got fatal error 1236 from master when reading data from binary log: 'The slave is connecting using CHANGE MASTER TO MASTER_AUTO_POSITION = 1, but the master has purged binary logs containing GTIDs that the slave requires.'
Normally, i would stop my slave, reset it, reset master (on the slave), and get new GTID_PURGED value from the master. But this time around, the master has a very unusual value(s) and i am not sure how to determine which one to use:
mysql> show master status\G
*************************** 1. row ***************************
File: mysqld-bin.000283
Position: 316137263
Binlog_Do_DB:
Binlog_Ignore_DB:
Executed_Gtid_Set: 1570dee1-165b-11e6-a4a2-00e081e93212:1-3537,
c73f3ee7-e8d4-ee19-6507-f898a9930ccd:1-18609,
cdb70eaa-f753-ee1b-5c95-ecb8024ae729:1-2357789559:2357789561-2357790104:2357790106-2514115701:2514115703-2514115705:2514115707-2546512667
1 row in set (0.00 sec)
From the slave with the new backup copy, i get this:
root#ubuntu:/var/lib/mysql# cat xtrabackup_binlog_info
mysqld-bin.000283 294922064 1570dee1-165b-11e6-a4a2-00e081e93212:1-3537,
c73f3ee7-e8d4-ee19-6507-f898a9930ccd:1-18609,
cdb70eaa-f753-ee1b-5c95-ecb8024ae729:1-2357789559:2357789561-2357790104:2357790106-2514115701:2514115703-2514115705:2514115707-2546400960
One more thing, i just purged the binary logs on the master before i made a backup. automatic binlog purge is set to 7 days. So i know its not because the bin log has been purged as the error is suggesting.
I am running Ubuntu 14:04, and Percona server version 5.6.31-77.
How can i resolve this issue? What is the correct value of the master's GTID_PURGED?
mysql 5.6 GTID replication errors and fixes
What is GTID? 
4c2ad77f-697e-11e3-b2c3-c80aa9f17dc4
This is the server's 128 bit identification number (SERVER_UUID). It identifies where the transaction was originated. Every server has its own SERVER_UUID.
What problems GTID solves?
It is possible to identify a transaction uniquely across the replication servers. Make the automation of failover process much easier. There is no need to do calculations, inspect the binary log and so on. Just MASTER_AUTO_POSITION=1.
At application level, it is easier to do WRITE/READ split. After a write on the MASTER, you have a GTID so just check if that GTID has been executed on the SLAVE that you use for reads.
Development of new automation tools isn't a pain now.
How can I implement it?
Three variables are needed in ALL servers of the replication chain
gtid_mode: It can be ON or OFF (not 1 or 0). It enables the GTID on the server.
log_bin: Enable binary logs. Mandatory to create a replication environment.
log-slave-updates: Slave servers must log the changes that come from the master in its own binary log.
enforce-gtid-consistency: Statements that can't be logged in a transactionally safe manner are denied by the server.
ref: http://dev.mysql.com/doc/refman/5.6/en/replication-gtids-howto.html
Replication errors and fixes:
"'Got fatal error 1236 from master when reading data from binary log: "The slave is connecting using CHANGE MASTER TO MASTER_AUTO_POSITION = 1, but the master has purged binary logs containing GTIDs that the slave requires." slave_io thread stop running.
Resolution: Considering following are the master – slave UUID's
MASTER UUID: 4c2ad77f-697e-11e3-b2c3-c80aa9f17dc4
SLAVE UUID: 5b37def1-6189-11e3-bee0-e89a8f22a444
Steps:
slave>stop slave;
slave> FLUSH TABLES WITH READ LOCK;
slave>show master status;
'4c2ad77f-697e-11e3-b2c3-c80aa9f17dc4:1-83345127,5b37def1-6189-11e3-bee0-e89a8f22a444:1-13030:13032-13317:13322-13325:13328-653183:653185-654126:654128-1400817:1400820-3423394:3423401-5779965′
(HERE 83345127 Last GTID executed on master and 5779965 Last slave GTID executed on Master )
slave> reset master;
slave>set global GTID_PURGED='4c2ad77f-697e-11e3-b2c3-c80aa9f17dc4:1-83345127,5b37def1-6189-11e3-bee0-e89a8f22a444:1-5779965′;
slave>start slave;
slave>unlock tables;
slave>show slave status;
NOTE: After this Re-start slave other chain-slaves if they stop replicating;
ERROR: 'Error "Table … 'doesn"t exist" on query. Default database: …Query: "INSERT INTO OR Last_SQL_Error: ….Error 'Duplicate entry' SKIP Transaction on slave (slave_sql Thread stop running) NOTE:
SQL_SLAVE_SKIP_COUNTER doesn't work anymore with GTID.
We need to find what transaction is causing the replication to fail.
– From binary log
– From SHOW SLAVE STATUS (retrieved vs executed)
Type of errors: (check last sql error in show slave status)
Resolution: Considering following are the master – slave UUID's
MASTER UUID: 4c2ad77f-697e-11e3-b2c3-c80aa9f17dc4
SLAVE UUID: 5b37def1-6189-11e3-bee0-e89a8f22a444
slave>show slave status;
copy the 'Executed_Gtid_Set' value. '4c2ad77f-697e-11e3-b2c3-c80aa9f17dc4:1-659731804,5b37def1-6189-11e3-bee0-e89a8f22a444:1-70734947-80436012:80436021-80437839'
-Seems that slave (with uuid 5b37def1-6189-11e3-bee0-e89a8f22a444) transaction '80437840' is causing the problem here.
slave> STOP SLAVE;
slave> SET GTID_NEXT="5b37def1-6189-11e3-bee0-e89a8f22a444:80437840"; (last_executed_slave_gtid_on_master + 1)
slave> BEGIN; COMMIT;
slave> SET GTID_NEXT="AUTOMATIC";
slave> START SLAVE;
slave> show slave status;
and it's ALL SET !!!
#If using xtrabackup is the backup in the main instance.
cat xtrabackup_info | grep binlog_pos
#Use the information you gave as an example：
binlog_pos = filename 'mysqld-bin.000283', position '294922064', GTID of the last change '1570dee1-165b-11e6-a4a2-00e081e93212:1-3537,c73f3ee7-e8d4-ee19-6507-f898a9930ccd:1-18609,cdb70eaa-f753-ee1b-5c95-ecb8024ae729:1-2357789559:2357789561-2357790104:2357790106-2514115701:2514115703-2514115705:2514115707-2546400960'
#copy GTID of the last change to gtid_purged
slave>STOP SLAVE;
slave>RESET MASTER;
slave>SET GLOBAL gtid_purged='1570dee1-165b-11e6-a4a2-00e081e93212:1-3537,c73f3ee7-e8d4-ee19-6507-f898a9930ccd:1-18609,cdb70eaa-f753-ee1b-5c95-ecb8024ae729:1-2357789559:2357789561-2357790104:2357790106-2514115701:2514115703-2514115705:2514115707-2546400960';
slave>change master to master_host='master ip',master_port=master port,MASTER_USER = 'Your replicate username', MASTER_PASSWORD = 'Your replicate password',master_auto_position=1;
slave>START SLAVE;
Master db MySQL db Server 2012
Slave db MySQL Win7 XAMPP
DB size 500MB
Table count 42
I have setup the replication successfully however it stopped last week and my slave was showing the error Slave_SQL_Running No. I realised that it was looking at an incorrect log file (00004 whereas it should have been 00006).
I have since sorted this by;
At the MASTER;
SHOW MASTER STATUS;
Copied the values of MASTER_LOG_FILE and MASTER_LOG_POS.
At the SLAVE;
STOP SLAVE;
RESET SLAVE;
CHANGE MASTER TO MASTER_LOG_FILE='mysql-bin.000001', MASTER_LOG_POS=98; (<- example values)
START SLAVE;
SHOW SLAVE STATUS \G;
On my master I tested the replication by editing the table members - I edited one of the row values (from 85 to 86 - this successfully replicated in my slave). However I notice that on my master members table there are 70652 members but on my slave there are only 70056.
I added two new members to my master members table and the total increases by 2 on both tables. However there still seems to be that 600 missing?
What could be the problem? Replication seems to be working but totals aren't. New members are added to the members table each day, but the aren't being added to my slave members table.
The results of my slave status table (from phpmyadmin) are;
Slave_IO_State Waiting for master to send event
Master_Host xxx.xxx.xxx.xxx
Master_User repl
Master_Port 3306
Connect_Retry 60
Master_Log_File mysql-bin.000006
Read_Master_Log_Pos 787956776
Relay_Log_File mysql-relay-bin.000004
Relay_Log_Pos 624412
Relay_Master_Log_File mysql-bin.000006
Slave_IO_Running Yes
Slave_SQL_Running Yes
Replicate_Do_DB
Replicate_Ignore_DB
Replicate_Do_Table
Replicate_Ignore_Table
Replicate_Wild_Do_Table
Replicate_Wild_Ignore_Table
Last_Errno 0
Last_Error
Skip_Counter 0
Exec_Master_Log_Pos 787956776
Relay_Log_Space 788197
Until_Condition None
Until_Log_File
Until_Log_Pos 0
Master_SSL_Allowed No
Master_SSL_CA_File
Master_SSL_CA_Path
Master_SSL_Cert
Master_SSL_Cipher
Master_SSL_Key
Seconds_Behind_Master 0
Is there something else that I could check or test?
Yes, when you stopped the replication was some rows changed or inserted. After this you have RESET the SLAVE and set the MASTER_LOG_POS. So the replication NEVER can gets the old changes.
You have 2 Options:
First:
Stop Replication
Dump the Master DB (with master position)
Restore it in the Slave
set set Position or check them
start slave
second
Stop slave
sync the masterDB to Slave DB with percona Toolkit - pt-table-sync
Start slave
I have a problem with mysql replication.
I configure two virtual host.
Server 1 Apache + mysql Ver 15.1 Distrib 5.5.41-MariaDB
Master and SLAVE OF Server2
Server 2 mysql Ver 14.14 Distrib 5.5.42
Master and SLAVE OF Server1
Topologi MASTER + MASTER
When I restart slaves all work good, short latency and fast update. But when I wait a few minutes the replication not work more. If I update some row or make a insert or delete the slave not update the changes.
The logs not write any error, but the master_position_log is diferent between master and slave.
And if I restart the slaves all works again, the bdd is updated and the replication works well.
I don't know what happen, seems the threads sleep or death.
Thanks for some idea for fix the problem
In two cases the processes seems ok.
SERVER1
Kill 168 system user None Connect 1146 Waiting for master to send event ---
Kill 169 system user None Connect 945 Slave has read all relay log; waiting for the slave I/O thread to update it ---
Kill 170 master XXXXXXX:59273 None Binlog Dump 1145 Master has sent all binlog to slave; waiting for binlog to be updated ---
SERVER2
Kill 73 root XXXXXX:55089 None Binlog Dump 1137 Master has sent all binlog to slave; waiting for binlog to be updated ---
Kill 76 system user None Connect 1137 Waiting for master to send event ---
Kill 77 system user None Connect 985 Slave has read all relay log; waiting for the slave I/O thread to update it ---
The problem is latency.
My solution, create a CRON every minut for stop and start slave.
Now all works.
Cristian
SHOW SLAVE STATUS;
on each server. That is likely to tell you what is wrong.
You do understand the potential problems with AUTO_INCREMENT and UNIQUE keys when you are writing to both heads of a dual-Master topology?
I'm experiencing some trouble setting up mysql replication between a master & a slave..
I did the setup successfully, but data doesn't update.
Master : show master status;
[File]: mysql-bin.000033
[Position]: 1757196
[Binlog_Do_DB]: ciel
Master : show processlist;
[User]: slave
[Host]: 92.222.177.xxx:57578 ( right slave ip )
[db]:
[Command]: Binlog Dump
[Time]: 1231
[State]: Has sent all binlog to slave; waiting for binlog to be updated
Slave : show slave status;
[Slave_IO_State]: Waiting for master to send event
[Master_Host]: 46.105.122.xxx
[Master_User]: slave
[Master_Port]: 3306
[Connect_Retry]: 60
[Master_Log_File]: mysql-bin.000033
[Read_Master_Log_Pos]: 1757196
[Relay_Log_File]: mysqld-relay-bin.000006
[Relay_Log_Pos]: 252
[Relay_Master_Log_File]: mysql-bin.000033
[Slave_IO_Running]: Yes
[Slave_SQL_Running]: Yes
[Replicate_Do_DB]: ciel
[Exec_Master_Log_Pos]: 1757196
[Relay_Log_Space]: 409
[Until_Condition]: None
[Master_SSL_Allowed]: No
[Master_SSL_Verify_Server_Cert]: No
[Master_Server_Id]: 1
Slave : show proccesslist;
[User]: system user
[Host]:
[db]:
[Command]: Connect
[Time]: 1231
[State]: Waiting for master to send event
[Info]:
[Id]: 2
[User]: system user
[Host]:
[db]:
[Command]: Connect
[Time]: 1231
[State]: Slave has read all relay log; waiting for the slave I/O thread to update it
then selecting data on master :
master: lastmod: 2014-10-26 17:14:55
slave: lastmod: 2014-10-26 15:45:45
I'm feeling lost, because I'm still not finding after 8 hours, how to set this up correctly.
Mysql Server1 is running as MASTER. -- server id =1
Mysql Server2 is running as SLAVE. -- server id =2
Now DB replication is happening from MASTER to SLAVE.
Switch:
Now when I stop Slave on Server2 and Configure Server1 as Slave (by command CHANGE MASTER TO MASTER_HOST=') and start Slave on server1, the replication failed with below error:
Last_IO_Errno: 1593
Last_IO_Error: Fatal error: The slave I/O thread stops because master and slave have equal MySQL server ids; these ids must be different for replication to work (or the --replicate-same-server-id option must be used on slave but this does not always make sense; please check the manual before using it).
Im using MYSQL
Pls help as im new to MYSQL.