When tyring to login to RDP the "old" remote dekstop connection gave "an internal error occured"
And the new modern UI remote dekstop from windows store with version 10.2.1810.0 gave: error code 0x4 remote desktop
It seems a colleage has been logged in with wierd screen size. How can I resolve this without rebooting the machine?
I found a solution.
In the new GUI untick:
"Uppdatera fjärrsessionens upplösning vid storleksändring" in Swedish
Which translates to: Update the resolution of the remote session when resizing
Update remote sessions resolution when size change
Actually, even moving the port off 3389 doesn't help (for long)
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\TerminalServer\WinStations\RDP-Tcp\PortNumber
if there is an open port allowing RDP they will find it eventually and you will need to implement one of the above programs noted by Daniel. That was exactly my issue as well. You can usually tell if the problem is intermittent since it's just luck to get by the constant pounding on the open port...
For me, it was the graphic choice. No idea why but as I swap between the 4 options, only one works
I needed to set it to Highest Quality (32 bit)
However, I then restarted the server, and it no longer worked but True Colour (24 bit) did work! So, hopefully by toggling through each will get you through
In my case the cause was AVG Firewall blocking some RDP connections. I had to configure AVG Remote Access Module to allow RDP connections from some known IP addresses.
Hope this helps someone.
Looks like this error code pop up for many things... from screen resolution resize to colour depth to firewall and more... Which is quite odd. You have to check what is your specific case.
In my case, when I had problems with error code 0x4, it was related to unprotected RDP port.
In my case, it was caused by open, unprotected, RDP port 3389. As many would guess, this is a highly targeted port by bots. If your port is open to anyone in the internet, it's just a matter of time that your server or computer will be targeted.
The best solution would be to only allow connections from trusted IP addresses, the ones you use for connecting to your server.
Of course, that can't always be possible, so another solution would be something like the fail2ban utility used on many Linux servers.
The two solution I've found are EvlWatcher which is free and open source, and IPBan that have a free and open source version, but also a paid version.
You only need one of them, as they do the same thing. Do not install both. They will scan your logs and will temporary or permanently block any IP address with repeated fail connections. I suggest you always have your main IP address whitelisted, so you don't lock yourself out.
Best regards to you all.
Related
Working on HTML/CSS/JS code. While i set up a localhost it works fine on my computer (the one hosting it) but i can't connect from any other computer on my network. I tryed (almost) everything and searched a lot throughout the last 3 days. I tryed XAMPP and MAMP but whatever i do i get the same error; "ERR_CONNECTION_TIMED_OUT" or "ERR_CONNECTION_REFUSED" (Chrome). Im new to programming and self-tought...so in many cases i did not know exactly what i have been doing... i followed tuttorials and articles about relevant subjects but nothing came out!
At this point, i'm not even sure if what im trying to do is even possible, but many people i came accross searching said it worked for them no-problem.
Also, strange thing; "localhost" seems to work fine on my computer, while "127.0.0.1" sometimes don't. IPv4 works fine allways.
EDIT Found the solution, it was just my firewall blocking the apache server -_- I am dumb. Thanks for the answers & help!
From my experience to access you're outputted code from a different computer on the same network use http://192.168.X.X where X.X is your server's local IP address. Should solve the issue. To get the ip of the computer its hosted on (permitting its windows) open up your cmd prompt and type "ipconfig" then you will get all of the neccesary ip info.
Yeah every localhost points to 127.0.0.1 that means the machine you are using.
In your lan you should find your LAN Address and access using it.
Depending on your scenario maybe you need to set some DNS Server.
I am learning to make chrome app which will receive UDP packets from remote device. All works perfectly fine, however, in order to receive packets from remote device I need to turn off windows firewall.
Now the problem is that I do not see a way to add this app to pass firewall exception. Because I only see option to allow Chrome through firewall, not any of its apps.
What is the solution / workaround to this problem?
Thanks
Since I didn't get any answer, the best possible solution I could find so far is to add the port on which my chrome app will listen to firewall inbound rules. I didn't know this was possible until i read this article https://www.thewindowsclub.com/block-open-port-windows-8-firewall
However I still don't consider it the right solution because lets say I publish my app online for other people, it will not be convenient for them to be adding rules to their firewalls.
I am sure there must be a better solution.
I sort of make shift followed this guide on how to setup remote debugging. Since I am using Adobe Animate to compile my app I assume it has done the majority of the build steps already as I get a similar screen described.
I don't understand though. Here I have port forwarding up on my router so that it goes to my PC. I have TCP port 7935 up and open. Windows firewall on or off doesn't seem to make difference. Windows firewall even prompted me to allow or deny fdb after I ran it. I can't get my phone to connect via remote debugging. I want to be able to send this to my client who is having issue with the app so I can see what's going on under the hood instead of relying on a giant sum of try/catch statements and screenshots. Any help?
I tried a dummy domain and it seems to know that it can't connect to it. When I try mine or my IPv4 it doesn't let me connect. It just freezes up the app.
I don't know whether it works or not in Animate CC, but it works via Flash Builder. I'm using Android real device and I have Android SDK tools installed on my PC
Yes, I have followed that tuts from official Adobe docs, but that doesn't work
First: Simply connect your device to your PC
Actually , you can debug your app remotely as long as your device has been connected with your PC. This step, doesn't necessarily requires FDB.
In my case , all I need was things like
adb connect 192.168.xx.xx:port
this will connect your Android device with your PC on your default network .
Second, set debug setting over network
You've done it in Animate CC, with addition you might want to check "install application on the connected device'
Third, just debug as usual
You can get all those debugging stuff including traces
I have some problem with my wso2-esb, it is on a remote linux server and seems to be succesfully started:
But when I try to access it, does not work:
I am not any expert in servers, it is the first time I do such thing, so I probably missed some basic step or something you might know.
Please suggest
Thanks a lot
SOLVED the server was firewalled, I had to add an exception to access it
Two things might be happening.
IE is masking an HTTP error response with its friendly errors.
Since this is a remote server, iptables could be running on the server, or there is another firewall in the way blocking that port.
To diagnose, I would start by disabling friendly error messages in IE, or using a different browser that doesn't do this. Instructions on how to disable it here: http://technet.microsoft.com/en-us/library/cc778248(v=ws.10).aspx
Next, if that doesn't resolve it, I would try running curl/wget on the server, and requesting the displayed URL. curl can be run with curl example.com and wget wget -qO- example.com, both will displayed the returned data (if any) on the terminal. If one returns a command not found, try the other. If that doesn't work, something is going on with your server. If it's returning something that looks like an error (e.g. a sever generated error page), I'd look into that too at this step.
If you appear to have connectivity issues, you can see if there's any iptables rules in place by running iptables -L on the server. A DROP all under Chain INPUT would cause this. You can read more about iptables here, and how to set it up for your needs here: https://help.ubuntu.com/community/IptablesHowTo (Even if you're not using ubuntu, this will still work for you, look in the "Allowing Incoming Traffic on Specific Ports" section, there's an example there you would need to adopt slightly for the non-standard port the server is running on). If there's an external firewall preventing access, you would need to talk with whoever is managing the sever.
Its seems some network issue. Can you try to ping the IP. If you cannt ping that means the machine is not reachable.
Regards,
/nuwan
I just uploaded a Wordpress site from my local machine to a Bluehost shared server. Ran fine locally, but now it is loading very slowly (107 seconds for home page). Bluehost tech support ran GTMetrix site analyzer and came back with "it's the CSS in your theme". They say nothing is wrong with the server.
I definitely need to clean up my CSS, but I didn't think it could have such a large impact on load times. Am I wrong?
Looking at the resource load times with Chrome's developer tools makes it immediately clear that it's your main document that is responsible for the delay; not the CSS, not anything else.
Therefore we have to assume it's something in your own code that causes the delay. Since it worked fine when run locally, the most likely scenario is that your code is trying to connect to some server (perhaps a database?) that it cannot connect to, and the delay is due to the connection finally timing out.
Recommendation: double check the places where you make connections to any external resource, and especially the credentials used when you do so. Is your host authorized to make these connections the same as your local development machine is? If you are connecting by IP, are those IPs accessible from your host?
The problem is loading
http://ad.doubleclick.net/adi/N5192.395082.LOT18.COM/B5529584;sz=300x250;ord=[timestamp]?
which is probably a script?
That takes 59 seconds for me. The rest is fast.
From the Chrome dev tools (Network tab): http://screencast.com/t/8DdtXeEv
The solution: turn off your ads.
You can use quick cache plugin which will speed up you site without compromise.
http://wordpress.org/extend/plugins/quick-cache/