I am learning to make chrome app which will receive UDP packets from remote device. All works perfectly fine, however, in order to receive packets from remote device I need to turn off windows firewall.
Now the problem is that I do not see a way to add this app to pass firewall exception. Because I only see option to allow Chrome through firewall, not any of its apps.
What is the solution / workaround to this problem?
Thanks
Since I didn't get any answer, the best possible solution I could find so far is to add the port on which my chrome app will listen to firewall inbound rules. I didn't know this was possible until i read this article https://www.thewindowsclub.com/block-open-port-windows-8-firewall
However I still don't consider it the right solution because lets say I publish my app online for other people, it will not be convenient for them to be adding rules to their firewalls.
I am sure there must be a better solution.
Related
When tyring to login to RDP the "old" remote dekstop connection gave "an internal error occured"
And the new modern UI remote dekstop from windows store with version 10.2.1810.0 gave: error code 0x4 remote desktop
It seems a colleage has been logged in with wierd screen size. How can I resolve this without rebooting the machine?
I found a solution.
In the new GUI untick:
"Uppdatera fjärrsessionens upplösning vid storleksändring" in Swedish
Which translates to: Update the resolution of the remote session when resizing
Update remote sessions resolution when size change
Actually, even moving the port off 3389 doesn't help (for long)
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\TerminalServer\WinStations\RDP-Tcp\PortNumber
if there is an open port allowing RDP they will find it eventually and you will need to implement one of the above programs noted by Daniel. That was exactly my issue as well. You can usually tell if the problem is intermittent since it's just luck to get by the constant pounding on the open port...
For me, it was the graphic choice. No idea why but as I swap between the 4 options, only one works
I needed to set it to Highest Quality (32 bit)
However, I then restarted the server, and it no longer worked but True Colour (24 bit) did work! So, hopefully by toggling through each will get you through
In my case the cause was AVG Firewall blocking some RDP connections. I had to configure AVG Remote Access Module to allow RDP connections from some known IP addresses.
Hope this helps someone.
Looks like this error code pop up for many things... from screen resolution resize to colour depth to firewall and more... Which is quite odd. You have to check what is your specific case.
In my case, when I had problems with error code 0x4, it was related to unprotected RDP port.
In my case, it was caused by open, unprotected, RDP port 3389. As many would guess, this is a highly targeted port by bots. If your port is open to anyone in the internet, it's just a matter of time that your server or computer will be targeted.
The best solution would be to only allow connections from trusted IP addresses, the ones you use for connecting to your server.
Of course, that can't always be possible, so another solution would be something like the fail2ban utility used on many Linux servers.
The two solution I've found are EvlWatcher which is free and open source, and IPBan that have a free and open source version, but also a paid version.
You only need one of them, as they do the same thing. Do not install both. They will scan your logs and will temporary or permanently block any IP address with repeated fail connections. I suggest you always have your main IP address whitelisted, so you don't lock yourself out.
Best regards to you all.
I can't intercept requests made by Chrome version 73.0.3683.86 to my localhost site.
Local host site is running on IIS on http://127.0.0.3:80
Burp proxy lister is default one on 127.0.0.1:8080
Interception rules are default one as well
In my LAN settings, "Bypass proxy server for local addresses" is not enabled
When Interception is turned ON and I reload page in Chrome browser, no request is "caught" by Burp, my local site loads and only the external requests are intercepted, such as loading external scripts from CDN.
Also under "Proxy" > "HTTP History" there is only request to external sites, and all requests to http://127.0.0.3:80 are not recorded.
When I reload same page by Internet Explorer 11, initial GET request is intercepted by Burp, as expected. Also "Proxy" > "HTTP History" shows all the requests to local site http://127.0.0.3:80
What is the problem with the Chrome? Thanks!
Found the solution late yesterday. I am using the Chrome extension ProxySwitchy, but it doesn't matter if you use that or the system proxy configuration. The solution works the same way.
You can solve this problem by adding an entry in /etc/hosts file like below
127.0.0.1 localhost
127.0.0.1 somehostname
Now burp will intercept request from somehostname
Which version of Chrome are you using?
Have you tried using the FoxyProxy Chrome extension?
As a workaround, you could modify the hosts file on your machine.
I experienced the same issue when I upgraded from Opera 58.0 to 60.0. I think that this is Chrome related, because I've also experienced it in all other Chrome browsers. Opera 58 utilizes Chrome 71.0.3578.98. Opera 60 utilizes version Chrome 73.0.3683.103. Something was definitely updated in Chrome between these versions to cause this problem to happen.
You have to subtract the implicit bypass rules defined in Chrome (https://chromium.googlesource.com/chromium/src/+/master/net/docs/proxy.md#Implicit-bypass-rules)
Requests to certain hosts will not be sent through a proxy, and will
instead be sent directly.
We call these the implicit bypass rules. The implicit bypass rules
match URLs whose host portion is either a localhost name or a
link-local IP literal. Essentially it matches:
localhost
*.localhost [::1]
127.0.0.1/8
169.254/16
[FE80::]/10
https://chromium.googlesource.com/chromium/src/+/master/net/docs/proxy.md#Bypass-rule_Subtract-implicit-rules
Whereas regular bypass rules instruct the browser about URLs that
should not use the proxy, Subtract Implicit Rules has the opposite
effect and tells the browser to instead use the proxy.
In order to be able to proxy through the loopback interface, you have to add the entry
<-loopback>
in the list of hosts for which you don't want to a proxy. It is a bit confusing, indeed.
Make sure you haven't enabled socks proxy option, it happened with me too and i found the solution when i disabled the socks proxy option, just make sure it's disabled!
Example:
It helped me
I turned on this settings
I'm trying to set up GUI access to a linux VM on google compute engine. I've followed the advice here:
https://groups.google.com/forum/#!topic/gce-discussion/tN9oZs8xWps
I can get as far as getting the instance to show up on the "My Computers" section of the CRD app, but it is grayed out.
I'm wondering if I need to mess around with firewall settings, or try a different desktop (I've been trying cinnamon). I'd appreciate any help. Thanks!
You definitely have to open the ports to connect, so you will have to use a firewall rule. Cloud Platform has an implicit deny ingress rule. It is explained in the thread you posted that also if you are using CentOS there is an additional steps to disable a firewall rule.
I sort of make shift followed this guide on how to setup remote debugging. Since I am using Adobe Animate to compile my app I assume it has done the majority of the build steps already as I get a similar screen described.
I don't understand though. Here I have port forwarding up on my router so that it goes to my PC. I have TCP port 7935 up and open. Windows firewall on or off doesn't seem to make difference. Windows firewall even prompted me to allow or deny fdb after I ran it. I can't get my phone to connect via remote debugging. I want to be able to send this to my client who is having issue with the app so I can see what's going on under the hood instead of relying on a giant sum of try/catch statements and screenshots. Any help?
I tried a dummy domain and it seems to know that it can't connect to it. When I try mine or my IPv4 it doesn't let me connect. It just freezes up the app.
I don't know whether it works or not in Animate CC, but it works via Flash Builder. I'm using Android real device and I have Android SDK tools installed on my PC
Yes, I have followed that tuts from official Adobe docs, but that doesn't work
First: Simply connect your device to your PC
Actually , you can debug your app remotely as long as your device has been connected with your PC. This step, doesn't necessarily requires FDB.
In my case , all I need was things like
adb connect 192.168.xx.xx:port
this will connect your Android device with your PC on your default network .
Second, set debug setting over network
You've done it in Animate CC, with addition you might want to check "install application on the connected device'
Third, just debug as usual
You can get all those debugging stuff including traces
My Chrome browser is in a weird state. It claims that it's configured to use a proxy server and that it can't connect to that server. Problem is, when I go to the LAN settings, the option to use a proxy server is deselected. Toggling this setting has no effect.
I've tried reinstalling Chrome but the problem persists.
Any idea on how I can get it to stop trying to use whatever proxy it thinks it's configured for?
try selecting no proxy in network settings of chrome. i'm not sure whether this going to work but it is worth trying. its not going to do any harm.
hope you find a solution