Related
Is it possible, using CSS only, to make the background of an element semi-transparent but have the content (text & images) of the element opaque?
I'd like to accomplish this without having the text and the background as two separate elements.
When trying:
p {
position: absolute;
background-color: green;
filter: alpha(opacity=60);
opacity: 0.6;
}
span {
color: white;
filter: alpha(opacity=100);
opacity: 1;
}
<p>
<span>Hello world</span>
</p>
It looks like child elements are subjected to the opacity of their parents, so opacity:1 is relative to the opacity:0.6 of the parent.
Either use a semi-transparent PNG or SVG image or use CSS:
background-color: rgba(255, 0, 0, 0.5);
Here's an article from css3.info, Opacity, RGBA and compromise (2007-06-03).
Beware that the text still needs sufficient contrast with the background, once the underlying background shines through.
<p style="background-color: rgba(255, 0, 0, 0.5);">
<span>Hello, World!</span>
</p>
In Firefox 3 and Safari 3, you can use RGBA like Georg Schölly mentioned.
A little known trick is that you can use it in Internet Explorer as well using the gradient filter.
background-color: rgba(0, 255, 0, 0.5);
filter: progid:DXImageTransform.Microsoft.Gradient(GradientType=0, StartColorStr='#7F00FF00', EndColorStr='#7F00FF00');
The first hex number defines the alpha value of the color.
Full solution all browsers:
.alpha60 {
/* Fallback for web browsers that doesn't support RGBa */
background: rgb(0, 0, 0) transparent;
/* RGBa with 0.6 opacity */
background: rgba(0, 0, 0, 0.6);
/* For IE 5.5 - 7*/
filter:progid:DXImageTransform.Microsoft.gradient(startColorstr=#99000000, endColorstr=#99000000);
/* For IE 8*/
-ms-filter: "progid:DXImageTransform.Microsoft.gradient(startColorstr=#99000000, endColorstr=#99000000)";
}
This is from CSS background transparency without affecting child elements, through RGBa and filters.
Screenshots proof of results:
This is when using the following code:
<head>
<meta http-equiv="X-UA-Compatible" content="IE=edge" >
<title>An XHTML 1.0 Strict standard template</title>
<meta http-equiv="content-type" content="text/html;charset=utf-8" />
<style type="text/css" media="all">
.transparent-background-with-text-and-images-on-top {
background: rgb(0, 0, 0) transparent; /* Fallback for web browsers that doesn't support RGBa */
background: rgba(0, 0, 0, 0.6); /* RGBa with 0.6 opacity */
filter:progid:DXImageTransform.Microsoft.gradient(startColorstr=#99000000, endColorstr=#99000000); /* For IE 5.5 - 7*/
-ms-filter: "progid:DXImageTransform.Microsoft.gradient(startColorstr=#99000000, endColorstr=#99000000)"; /* For IE 8*/
}
</style>
</head>
<body>
<div class="transparent-background-with-text-and-images-on-top">
<p>Here some content (text AND images) "on top of the transparent background"</p>
<img src="http://i.imgur.com/LnnghmF.gif">
</div>
</body>
</html>
This is the best solution I could come up with, NOT using CSS 3. And it works great on Firefox, Chrome, and Internet Explorer as far as I can see.
Put a container div and two children divs at the same level, one for content, one for the background.
And using CSS, auto-size the background to fit the content and put the background actually in the back using z-index.
.container {
position: relative;
}
.content {
position: relative;
color: White;
z-index: 5;
}
.background {
position: absolute;
top: 0px;
left: 0px;
width: 100%;
height: 100%;
background-color: Black;
z-index: 1;
/* These three lines are for transparency in all browsers. */
-ms-filter: "progid:DXImageTransform.Microsoft.Alpha(Opacity=50)";
filter: alpha(opacity=50);
opacity: .5;
}
<div class="container">
<div class="content">
Here is the content.
<br/>Background should grow to fit.
</div>
<div class="background"></div>
</div>
For a simple semi-transparent background color, the above solutions (CSS3 or bg images) are the best options. However, if you want to do something fancier (e.g. animation, multiple backgrounds, etc.), or if you don't want to rely on CSS3, you can try the “pane technique”:
.pane, .pane > .back, .pane > .cont { display: block; }
.pane {
position: relative;
}
.pane > .back {
position: absolute;
width: 100%; height: 100%;
top: auto; bottom: auto; left: auto; right: auto;
}
.pane > .cont {
position: relative;
z-index: 10;
}
<p class="pane">
<span class="back" style="background-color: green; opacity: 0.6;"></span>
<span class="cont" style="color: white;">Hello world</span>
</p>
The technique works by using two “layers” inside of the outer pane element:
one (the “back”) that fits the size of the pane element without affecting the flow of content,
and one (the “cont”) that contains the content and helps determine the size of the pane.
The position: relative on pane is important; it tells back layer to fit to the pane's size. (If you need the <p> tag to be absolute, change the pane from a <p> to a <span> and wrap all that in a absolutely-position <p> tag.)
The main advantage this technique has over similar ones listed above is that the pane doesn't have to be a specified size; as coded above, it will fit full-width (normal block-element layout) and only as high as the content. The outer pane element can be sized any way you please, as long as it's rectangular (i.e. inline-block will work; plain-old inline will not).
Also, it gives you a lot of freedom for the background; you're free to put really anything in the back element and have it not affect the flow of content (if you want multiple full-size sub-layers, just make sure they also have position: absolute, width/height: 100%, and top/bottom/left/right: auto).
One variation to allow background inset adjustment (via top/bottom/left/right) and/or background pinning (via removing one of the left/right or top/bottom pairs) is to use the following CSS instead:
.pane > .back {
position: absolute;
width: auto; height: auto;
top: 0px; bottom: 0px; left: 0px; right: 0px;
}
As written, this works in Firefox, Safari, Chrome, IE8+, and Opera, although IE7 and IE6 require extra CSS and expressions, IIRC, and last time I checked, the second CSS variation does not work in Opera.
Things to watch out for:
Floating elements inside of the cont layer will not be contained. You'll need to make sure they are cleared or otherwise contained, or they'll slip out of the bottom.
Margins go on the pane element and padding goes on the cont element. Don't do use the opposite (margins on the cont or padding on the pane) or you'll discover oddities such as the page always being slightly wider than the browser window.
As mentioned, the whole thing needs to be block or inline-block. Feel free to use <div>s instead of <span>s to simplify your CSS.
A fuller demo, showing off the flexibility of this technique by using it in tandem with display: inline-block, and with both auto & specific widths/min-heights:
.pane, .pane > .back, .pane > .cont { display: block; }
.pane {
position: relative;
width: 175px; min-height: 100px;
margin: 8px;
}
.pane > .back {
position: absolute; z-index: 1;
width: auto; height: auto;
top: 8px; bottom: 8px; left: 8px; right: 8px;
}
.pane > .cont {
position: relative; z-index: 10;
}
.debug_red { background: rgba(255, 0, 0, 0.5); border: 1px solid rgba(255, 0, 0, 0.75); }
.debug_green { background: rgba(0, 255, 0, 0.5); border: 1px solid rgba(0, 255, 0, 0.75); }
.debug_blue { background: rgba(0, 0, 255, 0.5); border: 1px solid rgba(0, 0, 255, 0.75); }
<p class="pane debug_blue" style="float: left;">
<span class="back debug_green"></span>
<span class="cont debug_red">
Pane content.<br/>
Pane content.
</span>
</p>
<p class="pane debug_blue" style="float: left;">
<span class="back debug_green"></span>
<span class="cont debug_red">
Pane content.<br/>
Pane content.<br/>
Pane content.<br/>
Pane content.<br/>
Pane content.<br/>
Pane content.<br/>
Pane content.<br/>
Pane content.<br/>
Pane content.
</span>
</p>
<p class="pane debug_blue" style="float: left; display: inline-block; width: auto;">
<span class="back debug_green"></span>
<span class="cont debug_red">
Pane content.<br/>
Pane content.
</span>
</p>
<p class="pane debug_blue" style="float: left; display: inline-block; width: auto; min-height: auto;">
<span class="back debug_green"></span>
<span class="cont debug_red">
Pane content.<br/>
Pane content.
</span>
</p>
And here's a live demo of the technique being used extensively:
There is a trick to minimize the markup: Use a pseudo element as the background and you can set the opacity to it without affecting the main element and its children:
DEMO
Output:
Relevant code:
p {
position: relative;
}
p:after {
content: '';
position: absolute;
top: 0;
left: 0;
width: 100%;
height: 100%;
background: #fff;
-ms-filter: "progid:DXImageTransform.Microsoft.Alpha(Opacity=50)";
opacity: .6;
z-index: -1;
}
/*** The following is just for demo styles ***/
body {
background: url('http://i.imgur.com/k8BtMvj.jpg') no-repeat;
background-size: cover;
}
p {
width: 50%;
padding: 1em;
margin: 10% auto;
font-family: arial, serif;
color: #000;
}
img {
display: block;
max-width: 90%;
margin: .6em auto;
}
<p>Lorem ipsum dolor sit amet, consectetur adipiscing elit. Sed a ligula ut nunc dignissim molestie.
<img src="http://i.imgur.com/hPLqUtN.jpg" alt="" />
</p>
Browser support is Internet Explorer 8 and later.
pseudo elements
opacity
It's better to use a semi-transparent .png.
Just open Photoshop, create a 2x2 pixel image (picking 1x1 can cause an Internet Explorer bug!), fill it with a green color and set the opacity in "Layers tab" to 60%. Then save it and make it a background image:
<p style="background: url(green.png);">any text</p>
It works cool, of course, except in lovely Internet Explorer 6. There are better fixes available, but here's a quick hack:
p {
_filter: expression((runtimeStyle.backgroundImage != 'none') ? runtimeStyle.filter = 'progid:DXImageTransform.Microsoft.AlphaImageLoader(src='+currentStyle.backgroundImage.split('\"')[1]+', sizingMethod=scale)' : runtimeStyle.filter,runtimeStyle.backgroundImage = 'none');
}
This method allows you to have an image in the background and not only a solid color, and can be used to have transparency on other attributes such as borders. No transparent PNG images are required.
Use :before (or :after) in CSS and give them the opacity value to leave the element at its original opacity. Thus you can use :before to make a faux element and give it the transparent background (or borders) you want and move it behind the content you want to keep opaque with z-index.
An example (fiddle) (note that the DIV with class dad is just to provide some context and contrast to the colors, this extra element is actually not needed, and the red rectangle is moved a bit down and to the right to leave visible the background behind the fancyBg element):
<div class="dad">
<div class="fancyBg">
Test text that should have solid text color lets see if we can manage it without extra elements
</div>
</div>
with this CSS:
.dad {
background: lime; border: 1px double black; margin: 1ex 2ex;
padding: 0.5ex; position: relative; -k-z-index: 5;
}
.fancyBg {
border: 1px dashed black; position: relative; color: white; font-weight: bold;
z-index: 0; /*background: black;*/
}
.fancyBg:before {content:'-'; display: block;
position: absolute; background: red; opacity: .5;
top: 2ex; right: -2ex; bottom: -2ex; left: 2ex;
/*top: 0; right: 0; bottom: 0; left: 0;*/
z-index: -1;
}
In this case .fancyBg:before has the CSS properties you want to have with transparency (red background in this example, but can be an image or borders). It's positioned as absolute to move it behind .fancyBg (use values of zero or whatever is more appropriate for your needs).
The easiest method would be to use a semi-transparent background PNG image.
You can use JavaScript to make it work in Internet Explorer 6 if you need to.
I use the method outlined in Transparent PNGs in Internet Explorer 6.
Other than that, you could fake it using two side-by-side sibling elements - make one semi-transparent, then absolutely position the other over the top.
Almost all these answers assume the designer wants a solid color background. If the designer actually wants a photo as the background the only real solution at the moment is JavaScript like the jQuery Transify plugin mentioned elsewhere.
What we need to do is join the CSS working group discussion and make them give us a background-opacity attribute! It should work hand in hand with the multiple-backgrounds feature.
The problem is, that the text actually has full opacity in your example. It has full opacity inside the p tag, but the p tag is just semi-transparent.
You could add an semi-transparent PNG background image instead of realizing it in CSS, or separate text and div into two elements and move the text over the box (for example, negative margin).
Otherwise it won't be possible.
Just like Chris mentioned: if you use a PNG file with transparency, you have to use a JavaScript workaround to make it work in the pesky Internet Explorer...
Here's how I do this (it might not be optimal, but it works):
Create the div that you want to be semi-transparent. Give it a class/id. Leave it empty, and close it. Give it a set height and width (say, 300 pixels by 300 pixels). Give it an opacity of 0.5 or whatever you like, and a background color.
Then, directly below that div, create another div with a different class/id. Create a paragraph inside it, where you'll place your text. Give the div position: relative, and top: -295px (that's negative 295 pixels). Give it a z-index of 2 for good measure, and make sure its opacity is 1. Style your paragraph as you like, but make sure the dimensions are less than that of the first div so it doesn't overflow.
That's it. Here's the code:
.trans {
opacity: 0.5;
height: 300px;
width: 300px;
background-color: orange;
}
.trans2 {
opacity: 1;
position: relative;
top: -295px;
}
.trans2 p {
width: 295px;
color: black;
font-weight: bold;
}
<body>
<div class="trans">
</div>
<div class="trans2">
<p>
text text text
</p>
</div>
</body>
This works in Safari 2.x, but I don't know about Internet Explorer.
If you are a Photoshop guy, you can also use:
#some-element {
background-color: hsla(170, 50%, 45%, 0.9); // **0.9 is the opacity range from 0 - 1**
}
Or:
#some-element {
background-color: rgba(170, 190, 45, 0.9); // **0.9 is the opacity range from 0 - 1**
}
Here is a jQuery plugin that will handle everything for you, Transify (Transify - a jQuery plugin to easily apply transparency / opacity to an element’s background).
I was running into this problem every now and then, so I decided to write something that would make life a lot easier. The script is less than 2 KB and it only requires one line of code to get it to work, and it will also handle animating the opacity of the background if you like.
A while back, I wrote about this in Cross Browser Background Transparency With CSS.
Bizarrely Internet Explorer 6 will allow you to make the background transparent and keep the text on top fully opaque. For the other browsers I then suggest using a transparent PNG file.
Opacity of background, but not the text has some ideas. Either use a semi-transparent image, or overlay an additional element.
CSS 3 has an easy solution of your problem. Use:
background-color:rgba(0, 255, 0, 0.5);
Here, rgba stands for red, green, blue, and alpha value. The green value is obtained because of 255 and half transparency is obtained by a 0.5 alpha value.
In order to make the background of an element semi-transparent, but have the content (text & images) of the element opaque, you need to write CSS code for that image, and you have to add one attribute called opacity with minimum value.
For example,
.image {
position: relative;
background-color: cyan;
opacity: 0.7;
}
// The smaller the value, the more it will be transparent, ore the value less will be transparency.
If you're using Less, you can use fade(color, 30%).
background-color: rgba(255, 0, 0, 0.5); as mentioned above is the best answer simply put. To say use CSS 3, even in 2013, is not simple because the level of support from various browsers changes with every iteration.
While background-color is supported by all major browsers (not new to CSS 3) [1] the alpha transparency can be tricky, especially with Internet Explorer prior to version 9 and with border color on Safari prior to version 5.1. [2]
Using something like Compass or SASS can really help production and cross platform compatibility.
[1] W3Schools: CSS background-color Property
[2] Norman's Blog: Browser Support Checklist CSS3 (October 2012)
You can solve this for Internet Explorer 8 by (ab)using the gradient syntax. The color format is ARGB. If you are using the Sass preprocessor you can convert colors using the built-in function "ie-hex-str()".
background: rgba(0,0,0, 0.5);
-ms-filter: "progid:DXImageTransform.Microsoft.gradient(startColorstr='#80000000', endColorstr='#80000000')";
<div align="center" style="width:100%;height:100%;background:white;opacity:0.5;position:absolute;z-index:1001">
<img id="search_img" style="margin-top:20%;" src="../resources/images/loading_small.gif">
</div>
http://jsfiddle.net/x2ukko7u/?
You can use the opacity value appended to the hexadecimal value:
background-color: #11ffeeaa;
In this example aa is the opacity. An opacity of 00 means transparent and ff means solid color.
The opacity is optional, so you can use the hexadecimal value as always:
background-color: #11ffee;
You can also use the old way with rgba():
background-color: rgba(117, 190, 218, 0.5);
And the background shorthand if you want to make sure that the background has no other styles, like images or gradients:
background: #11ffeeaa;
From the Mozilla's specification (https://developer.mozilla.org/en-US/docs/Web/CSS/background-color):
/* Keyword values */
background-color: red;
background-color: indigo;
/* Hexadecimal value */
background-color: #bbff00; /* Fully opaque */
background-color: #bf0; /* Fully opaque shorthand */
background-color: #11ffee00; /* Fully transparent */
background-color: #1fe0; /* Fully transparent shorthand */
background-color: #11ffeeff; /* Fully opaque */
background-color: #1fef; /* Fully opaque shorthand */
/* RGB value */
background-color: rgb(255, 255, 128); /* Fully opaque */
background-color: rgba(117, 190, 218, 0.5); /* 50% transparent */
/* HSL value */
background-color: hsl(50, 33%, 25%); /* Fully opaque */
background-color: hsla(50, 33%, 25%, 0.75); /* 75% transparent */
/* Special keyword values */
background-color: currentcolor;
background-color: transparent;
/* Global values */
background-color: inherit;
background-color: initial;
background-color: unset;
There's an easier solution to put an overlay over an image on the same div. It's not the right use of this tool. But works like a charm to make that overlay using CSS.
Use an inset shadow like this:
box-shadow: inset 0 0 0 1000px rgba(255, 255, 255, 0.9);
That's all :)
I normally use this class for my work. It's pretty good.
.transparent {
filter: alpha(opacity=50); /* Internet Explorer */
-khtml-opacity: 0.5; /* KHTML and old Safari */
-moz-opacity: 0.5; /* Firefox and Netscape */
opacity: 0.5; /* Firefox, Safari, and Opera */
}
It worked for me when using the format #AARRGGBB so the one working for me was #1C00ff00. Give it a try, because I have seen it working for some and not working for someone else. I am using it in CSS.
Since a lot of people will arrive here wanting to know how to adjust the opacity of any element (not just backgrounds), it's as simple as adding opacity: 0.2 (or whatever number between 0 and 1 you desire) to that element's CSS.
Example
.myclass {
color: #eb4746;
opacity: 0.2;
}
This can be used in backgrounds and in headers, paragraphs etc.
I agree with all above answers and rgba is the way to go. In my case, I was provided with a hex background programmatically, so I will have to generate my own rgba based on the hex code. I created a modified version of Mr. Down's answer to convert hex to rgba
function hexToRgba(hex,alpha) {
// Expand shorthand form (e.g. "03F") to full form (e.g. "0033FF")
var shorthandRegex = /^#?([a-f\d])([a-f\d])([a-f\d])$/i;
hex = hex.replace(shorthandRegex, function(m, r, g, b) {
return r + r + g + g + b + b;
});
var result = /^#?([a-f\d]{2})([a-f\d]{2})([a-f\d]{2})$/i.exec(hex);
if(result!=null){
const r = parseInt(result[1], 16);
const g = parseInt(result[2], 16);
const b = parseInt(result[3], 16);
//
return `rgba(${r},${g},${b},${alpha})`;
}
return null;
}
I think this gives you desired output:
div {
width: 200px;
height: 200px;
display: block;
position: relative;
}
div::after {
content: "";
background: url(image.jpg);
opacity: 0.5;
top: 0;
left: 0;
bottom: 0;
right: 0;
position: absolute;
z-index: -1;
}
This gives the desired result -
body {
background-image: url("\images\dark-cloud.jpg");
background-size: 100% 100%;
background-attachment: fixed;
opacity: .8;
}
Setting the opacity of the background.
Is it possible, using CSS only, to make the background of an element semi-transparent but have the content (text & images) of the element opaque?
I'd like to accomplish this without having the text and the background as two separate elements.
When trying:
p {
position: absolute;
background-color: green;
filter: alpha(opacity=60);
opacity: 0.6;
}
span {
color: white;
filter: alpha(opacity=100);
opacity: 1;
}
<p>
<span>Hello world</span>
</p>
It looks like child elements are subjected to the opacity of their parents, so opacity:1 is relative to the opacity:0.6 of the parent.
Either use a semi-transparent PNG or SVG image or use CSS:
background-color: rgba(255, 0, 0, 0.5);
Here's an article from css3.info, Opacity, RGBA and compromise (2007-06-03).
Beware that the text still needs sufficient contrast with the background, once the underlying background shines through.
<p style="background-color: rgba(255, 0, 0, 0.5);">
<span>Hello, World!</span>
</p>
In Firefox 3 and Safari 3, you can use RGBA like Georg Schölly mentioned.
A little known trick is that you can use it in Internet Explorer as well using the gradient filter.
background-color: rgba(0, 255, 0, 0.5);
filter: progid:DXImageTransform.Microsoft.Gradient(GradientType=0, StartColorStr='#7F00FF00', EndColorStr='#7F00FF00');
The first hex number defines the alpha value of the color.
Full solution all browsers:
.alpha60 {
/* Fallback for web browsers that doesn't support RGBa */
background: rgb(0, 0, 0) transparent;
/* RGBa with 0.6 opacity */
background: rgba(0, 0, 0, 0.6);
/* For IE 5.5 - 7*/
filter:progid:DXImageTransform.Microsoft.gradient(startColorstr=#99000000, endColorstr=#99000000);
/* For IE 8*/
-ms-filter: "progid:DXImageTransform.Microsoft.gradient(startColorstr=#99000000, endColorstr=#99000000)";
}
This is from CSS background transparency without affecting child elements, through RGBa and filters.
Screenshots proof of results:
This is when using the following code:
<head>
<meta http-equiv="X-UA-Compatible" content="IE=edge" >
<title>An XHTML 1.0 Strict standard template</title>
<meta http-equiv="content-type" content="text/html;charset=utf-8" />
<style type="text/css" media="all">
.transparent-background-with-text-and-images-on-top {
background: rgb(0, 0, 0) transparent; /* Fallback for web browsers that doesn't support RGBa */
background: rgba(0, 0, 0, 0.6); /* RGBa with 0.6 opacity */
filter:progid:DXImageTransform.Microsoft.gradient(startColorstr=#99000000, endColorstr=#99000000); /* For IE 5.5 - 7*/
-ms-filter: "progid:DXImageTransform.Microsoft.gradient(startColorstr=#99000000, endColorstr=#99000000)"; /* For IE 8*/
}
</style>
</head>
<body>
<div class="transparent-background-with-text-and-images-on-top">
<p>Here some content (text AND images) "on top of the transparent background"</p>
<img src="http://i.imgur.com/LnnghmF.gif">
</div>
</body>
</html>
This is the best solution I could come up with, NOT using CSS 3. And it works great on Firefox, Chrome, and Internet Explorer as far as I can see.
Put a container div and two children divs at the same level, one for content, one for the background.
And using CSS, auto-size the background to fit the content and put the background actually in the back using z-index.
.container {
position: relative;
}
.content {
position: relative;
color: White;
z-index: 5;
}
.background {
position: absolute;
top: 0px;
left: 0px;
width: 100%;
height: 100%;
background-color: Black;
z-index: 1;
/* These three lines are for transparency in all browsers. */
-ms-filter: "progid:DXImageTransform.Microsoft.Alpha(Opacity=50)";
filter: alpha(opacity=50);
opacity: .5;
}
<div class="container">
<div class="content">
Here is the content.
<br/>Background should grow to fit.
</div>
<div class="background"></div>
</div>
For a simple semi-transparent background color, the above solutions (CSS3 or bg images) are the best options. However, if you want to do something fancier (e.g. animation, multiple backgrounds, etc.), or if you don't want to rely on CSS3, you can try the “pane technique”:
.pane, .pane > .back, .pane > .cont { display: block; }
.pane {
position: relative;
}
.pane > .back {
position: absolute;
width: 100%; height: 100%;
top: auto; bottom: auto; left: auto; right: auto;
}
.pane > .cont {
position: relative;
z-index: 10;
}
<p class="pane">
<span class="back" style="background-color: green; opacity: 0.6;"></span>
<span class="cont" style="color: white;">Hello world</span>
</p>
The technique works by using two “layers” inside of the outer pane element:
one (the “back”) that fits the size of the pane element without affecting the flow of content,
and one (the “cont”) that contains the content and helps determine the size of the pane.
The position: relative on pane is important; it tells back layer to fit to the pane's size. (If you need the <p> tag to be absolute, change the pane from a <p> to a <span> and wrap all that in a absolutely-position <p> tag.)
The main advantage this technique has over similar ones listed above is that the pane doesn't have to be a specified size; as coded above, it will fit full-width (normal block-element layout) and only as high as the content. The outer pane element can be sized any way you please, as long as it's rectangular (i.e. inline-block will work; plain-old inline will not).
Also, it gives you a lot of freedom for the background; you're free to put really anything in the back element and have it not affect the flow of content (if you want multiple full-size sub-layers, just make sure they also have position: absolute, width/height: 100%, and top/bottom/left/right: auto).
One variation to allow background inset adjustment (via top/bottom/left/right) and/or background pinning (via removing one of the left/right or top/bottom pairs) is to use the following CSS instead:
.pane > .back {
position: absolute;
width: auto; height: auto;
top: 0px; bottom: 0px; left: 0px; right: 0px;
}
As written, this works in Firefox, Safari, Chrome, IE8+, and Opera, although IE7 and IE6 require extra CSS and expressions, IIRC, and last time I checked, the second CSS variation does not work in Opera.
Things to watch out for:
Floating elements inside of the cont layer will not be contained. You'll need to make sure they are cleared or otherwise contained, or they'll slip out of the bottom.
Margins go on the pane element and padding goes on the cont element. Don't do use the opposite (margins on the cont or padding on the pane) or you'll discover oddities such as the page always being slightly wider than the browser window.
As mentioned, the whole thing needs to be block or inline-block. Feel free to use <div>s instead of <span>s to simplify your CSS.
A fuller demo, showing off the flexibility of this technique by using it in tandem with display: inline-block, and with both auto & specific widths/min-heights:
.pane, .pane > .back, .pane > .cont { display: block; }
.pane {
position: relative;
width: 175px; min-height: 100px;
margin: 8px;
}
.pane > .back {
position: absolute; z-index: 1;
width: auto; height: auto;
top: 8px; bottom: 8px; left: 8px; right: 8px;
}
.pane > .cont {
position: relative; z-index: 10;
}
.debug_red { background: rgba(255, 0, 0, 0.5); border: 1px solid rgba(255, 0, 0, 0.75); }
.debug_green { background: rgba(0, 255, 0, 0.5); border: 1px solid rgba(0, 255, 0, 0.75); }
.debug_blue { background: rgba(0, 0, 255, 0.5); border: 1px solid rgba(0, 0, 255, 0.75); }
<p class="pane debug_blue" style="float: left;">
<span class="back debug_green"></span>
<span class="cont debug_red">
Pane content.<br/>
Pane content.
</span>
</p>
<p class="pane debug_blue" style="float: left;">
<span class="back debug_green"></span>
<span class="cont debug_red">
Pane content.<br/>
Pane content.<br/>
Pane content.<br/>
Pane content.<br/>
Pane content.<br/>
Pane content.<br/>
Pane content.<br/>
Pane content.<br/>
Pane content.
</span>
</p>
<p class="pane debug_blue" style="float: left; display: inline-block; width: auto;">
<span class="back debug_green"></span>
<span class="cont debug_red">
Pane content.<br/>
Pane content.
</span>
</p>
<p class="pane debug_blue" style="float: left; display: inline-block; width: auto; min-height: auto;">
<span class="back debug_green"></span>
<span class="cont debug_red">
Pane content.<br/>
Pane content.
</span>
</p>
And here's a live demo of the technique being used extensively:
There is a trick to minimize the markup: Use a pseudo element as the background and you can set the opacity to it without affecting the main element and its children:
DEMO
Output:
Relevant code:
p {
position: relative;
}
p:after {
content: '';
position: absolute;
top: 0;
left: 0;
width: 100%;
height: 100%;
background: #fff;
-ms-filter: "progid:DXImageTransform.Microsoft.Alpha(Opacity=50)";
opacity: .6;
z-index: -1;
}
/*** The following is just for demo styles ***/
body {
background: url('http://i.imgur.com/k8BtMvj.jpg') no-repeat;
background-size: cover;
}
p {
width: 50%;
padding: 1em;
margin: 10% auto;
font-family: arial, serif;
color: #000;
}
img {
display: block;
max-width: 90%;
margin: .6em auto;
}
<p>Lorem ipsum dolor sit amet, consectetur adipiscing elit. Sed a ligula ut nunc dignissim molestie.
<img src="http://i.imgur.com/hPLqUtN.jpg" alt="" />
</p>
Browser support is Internet Explorer 8 and later.
pseudo elements
opacity
It's better to use a semi-transparent .png.
Just open Photoshop, create a 2x2 pixel image (picking 1x1 can cause an Internet Explorer bug!), fill it with a green color and set the opacity in "Layers tab" to 60%. Then save it and make it a background image:
<p style="background: url(green.png);">any text</p>
It works cool, of course, except in lovely Internet Explorer 6. There are better fixes available, but here's a quick hack:
p {
_filter: expression((runtimeStyle.backgroundImage != 'none') ? runtimeStyle.filter = 'progid:DXImageTransform.Microsoft.AlphaImageLoader(src='+currentStyle.backgroundImage.split('\"')[1]+', sizingMethod=scale)' : runtimeStyle.filter,runtimeStyle.backgroundImage = 'none');
}
This method allows you to have an image in the background and not only a solid color, and can be used to have transparency on other attributes such as borders. No transparent PNG images are required.
Use :before (or :after) in CSS and give them the opacity value to leave the element at its original opacity. Thus you can use :before to make a faux element and give it the transparent background (or borders) you want and move it behind the content you want to keep opaque with z-index.
An example (fiddle) (note that the DIV with class dad is just to provide some context and contrast to the colors, this extra element is actually not needed, and the red rectangle is moved a bit down and to the right to leave visible the background behind the fancyBg element):
<div class="dad">
<div class="fancyBg">
Test text that should have solid text color lets see if we can manage it without extra elements
</div>
</div>
with this CSS:
.dad {
background: lime; border: 1px double black; margin: 1ex 2ex;
padding: 0.5ex; position: relative; -k-z-index: 5;
}
.fancyBg {
border: 1px dashed black; position: relative; color: white; font-weight: bold;
z-index: 0; /*background: black;*/
}
.fancyBg:before {content:'-'; display: block;
position: absolute; background: red; opacity: .5;
top: 2ex; right: -2ex; bottom: -2ex; left: 2ex;
/*top: 0; right: 0; bottom: 0; left: 0;*/
z-index: -1;
}
In this case .fancyBg:before has the CSS properties you want to have with transparency (red background in this example, but can be an image or borders). It's positioned as absolute to move it behind .fancyBg (use values of zero or whatever is more appropriate for your needs).
The easiest method would be to use a semi-transparent background PNG image.
You can use JavaScript to make it work in Internet Explorer 6 if you need to.
I use the method outlined in Transparent PNGs in Internet Explorer 6.
Other than that, you could fake it using two side-by-side sibling elements - make one semi-transparent, then absolutely position the other over the top.
Almost all these answers assume the designer wants a solid color background. If the designer actually wants a photo as the background the only real solution at the moment is JavaScript like the jQuery Transify plugin mentioned elsewhere.
What we need to do is join the CSS working group discussion and make them give us a background-opacity attribute! It should work hand in hand with the multiple-backgrounds feature.
The problem is, that the text actually has full opacity in your example. It has full opacity inside the p tag, but the p tag is just semi-transparent.
You could add an semi-transparent PNG background image instead of realizing it in CSS, or separate text and div into two elements and move the text over the box (for example, negative margin).
Otherwise it won't be possible.
Just like Chris mentioned: if you use a PNG file with transparency, you have to use a JavaScript workaround to make it work in the pesky Internet Explorer...
Here's how I do this (it might not be optimal, but it works):
Create the div that you want to be semi-transparent. Give it a class/id. Leave it empty, and close it. Give it a set height and width (say, 300 pixels by 300 pixels). Give it an opacity of 0.5 or whatever you like, and a background color.
Then, directly below that div, create another div with a different class/id. Create a paragraph inside it, where you'll place your text. Give the div position: relative, and top: -295px (that's negative 295 pixels). Give it a z-index of 2 for good measure, and make sure its opacity is 1. Style your paragraph as you like, but make sure the dimensions are less than that of the first div so it doesn't overflow.
That's it. Here's the code:
.trans {
opacity: 0.5;
height: 300px;
width: 300px;
background-color: orange;
}
.trans2 {
opacity: 1;
position: relative;
top: -295px;
}
.trans2 p {
width: 295px;
color: black;
font-weight: bold;
}
<body>
<div class="trans">
</div>
<div class="trans2">
<p>
text text text
</p>
</div>
</body>
This works in Safari 2.x, but I don't know about Internet Explorer.
If you are a Photoshop guy, you can also use:
#some-element {
background-color: hsla(170, 50%, 45%, 0.9); // **0.9 is the opacity range from 0 - 1**
}
Or:
#some-element {
background-color: rgba(170, 190, 45, 0.9); // **0.9 is the opacity range from 0 - 1**
}
Here is a jQuery plugin that will handle everything for you, Transify (Transify - a jQuery plugin to easily apply transparency / opacity to an element’s background).
I was running into this problem every now and then, so I decided to write something that would make life a lot easier. The script is less than 2 KB and it only requires one line of code to get it to work, and it will also handle animating the opacity of the background if you like.
A while back, I wrote about this in Cross Browser Background Transparency With CSS.
Bizarrely Internet Explorer 6 will allow you to make the background transparent and keep the text on top fully opaque. For the other browsers I then suggest using a transparent PNG file.
Opacity of background, but not the text has some ideas. Either use a semi-transparent image, or overlay an additional element.
CSS 3 has an easy solution of your problem. Use:
background-color:rgba(0, 255, 0, 0.5);
Here, rgba stands for red, green, blue, and alpha value. The green value is obtained because of 255 and half transparency is obtained by a 0.5 alpha value.
In order to make the background of an element semi-transparent, but have the content (text & images) of the element opaque, you need to write CSS code for that image, and you have to add one attribute called opacity with minimum value.
For example,
.image {
position: relative;
background-color: cyan;
opacity: 0.7;
}
// The smaller the value, the more it will be transparent, ore the value less will be transparency.
If you're using Less, you can use fade(color, 30%).
background-color: rgba(255, 0, 0, 0.5); as mentioned above is the best answer simply put. To say use CSS 3, even in 2013, is not simple because the level of support from various browsers changes with every iteration.
While background-color is supported by all major browsers (not new to CSS 3) [1] the alpha transparency can be tricky, especially with Internet Explorer prior to version 9 and with border color on Safari prior to version 5.1. [2]
Using something like Compass or SASS can really help production and cross platform compatibility.
[1] W3Schools: CSS background-color Property
[2] Norman's Blog: Browser Support Checklist CSS3 (October 2012)
You can solve this for Internet Explorer 8 by (ab)using the gradient syntax. The color format is ARGB. If you are using the Sass preprocessor you can convert colors using the built-in function "ie-hex-str()".
background: rgba(0,0,0, 0.5);
-ms-filter: "progid:DXImageTransform.Microsoft.gradient(startColorstr='#80000000', endColorstr='#80000000')";
<div align="center" style="width:100%;height:100%;background:white;opacity:0.5;position:absolute;z-index:1001">
<img id="search_img" style="margin-top:20%;" src="../resources/images/loading_small.gif">
</div>
http://jsfiddle.net/x2ukko7u/?
You can use the opacity value appended to the hexadecimal value:
background-color: #11ffeeaa;
In this example aa is the opacity. An opacity of 00 means transparent and ff means solid color.
The opacity is optional, so you can use the hexadecimal value as always:
background-color: #11ffee;
You can also use the old way with rgba():
background-color: rgba(117, 190, 218, 0.5);
And the background shorthand if you want to make sure that the background has no other styles, like images or gradients:
background: #11ffeeaa;
From the Mozilla's specification (https://developer.mozilla.org/en-US/docs/Web/CSS/background-color):
/* Keyword values */
background-color: red;
background-color: indigo;
/* Hexadecimal value */
background-color: #bbff00; /* Fully opaque */
background-color: #bf0; /* Fully opaque shorthand */
background-color: #11ffee00; /* Fully transparent */
background-color: #1fe0; /* Fully transparent shorthand */
background-color: #11ffeeff; /* Fully opaque */
background-color: #1fef; /* Fully opaque shorthand */
/* RGB value */
background-color: rgb(255, 255, 128); /* Fully opaque */
background-color: rgba(117, 190, 218, 0.5); /* 50% transparent */
/* HSL value */
background-color: hsl(50, 33%, 25%); /* Fully opaque */
background-color: hsla(50, 33%, 25%, 0.75); /* 75% transparent */
/* Special keyword values */
background-color: currentcolor;
background-color: transparent;
/* Global values */
background-color: inherit;
background-color: initial;
background-color: unset;
There's an easier solution to put an overlay over an image on the same div. It's not the right use of this tool. But works like a charm to make that overlay using CSS.
Use an inset shadow like this:
box-shadow: inset 0 0 0 1000px rgba(255, 255, 255, 0.9);
That's all :)
I normally use this class for my work. It's pretty good.
.transparent {
filter: alpha(opacity=50); /* Internet Explorer */
-khtml-opacity: 0.5; /* KHTML and old Safari */
-moz-opacity: 0.5; /* Firefox and Netscape */
opacity: 0.5; /* Firefox, Safari, and Opera */
}
It worked for me when using the format #AARRGGBB so the one working for me was #1C00ff00. Give it a try, because I have seen it working for some and not working for someone else. I am using it in CSS.
Since a lot of people will arrive here wanting to know how to adjust the opacity of any element (not just backgrounds), it's as simple as adding opacity: 0.2 (or whatever number between 0 and 1 you desire) to that element's CSS.
Example
.myclass {
color: #eb4746;
opacity: 0.2;
}
This can be used in backgrounds and in headers, paragraphs etc.
I agree with all above answers and rgba is the way to go. In my case, I was provided with a hex background programmatically, so I will have to generate my own rgba based on the hex code. I created a modified version of Mr. Down's answer to convert hex to rgba
function hexToRgba(hex,alpha) {
// Expand shorthand form (e.g. "03F") to full form (e.g. "0033FF")
var shorthandRegex = /^#?([a-f\d])([a-f\d])([a-f\d])$/i;
hex = hex.replace(shorthandRegex, function(m, r, g, b) {
return r + r + g + g + b + b;
});
var result = /^#?([a-f\d]{2})([a-f\d]{2})([a-f\d]{2})$/i.exec(hex);
if(result!=null){
const r = parseInt(result[1], 16);
const g = parseInt(result[2], 16);
const b = parseInt(result[3], 16);
//
return `rgba(${r},${g},${b},${alpha})`;
}
return null;
}
I think this gives you desired output:
div {
width: 200px;
height: 200px;
display: block;
position: relative;
}
div::after {
content: "";
background: url(image.jpg);
opacity: 0.5;
top: 0;
left: 0;
bottom: 0;
right: 0;
position: absolute;
z-index: -1;
}
This gives the desired result -
body {
background-image: url("\images\dark-cloud.jpg");
background-size: 100% 100%;
background-attachment: fixed;
opacity: .8;
}
Setting the opacity of the background.
Is it possible, using CSS only, to make the background of an element semi-transparent but have the content (text & images) of the element opaque?
I'd like to accomplish this without having the text and the background as two separate elements.
When trying:
p {
position: absolute;
background-color: green;
filter: alpha(opacity=60);
opacity: 0.6;
}
span {
color: white;
filter: alpha(opacity=100);
opacity: 1;
}
<p>
<span>Hello world</span>
</p>
It looks like child elements are subjected to the opacity of their parents, so opacity:1 is relative to the opacity:0.6 of the parent.
Either use a semi-transparent PNG or SVG image or use CSS:
background-color: rgba(255, 0, 0, 0.5);
Here's an article from css3.info, Opacity, RGBA and compromise (2007-06-03).
Beware that the text still needs sufficient contrast with the background, once the underlying background shines through.
<p style="background-color: rgba(255, 0, 0, 0.5);">
<span>Hello, World!</span>
</p>
In Firefox 3 and Safari 3, you can use RGBA like Georg Schölly mentioned.
A little known trick is that you can use it in Internet Explorer as well using the gradient filter.
background-color: rgba(0, 255, 0, 0.5);
filter: progid:DXImageTransform.Microsoft.Gradient(GradientType=0, StartColorStr='#7F00FF00', EndColorStr='#7F00FF00');
The first hex number defines the alpha value of the color.
Full solution all browsers:
.alpha60 {
/* Fallback for web browsers that doesn't support RGBa */
background: rgb(0, 0, 0) transparent;
/* RGBa with 0.6 opacity */
background: rgba(0, 0, 0, 0.6);
/* For IE 5.5 - 7*/
filter:progid:DXImageTransform.Microsoft.gradient(startColorstr=#99000000, endColorstr=#99000000);
/* For IE 8*/
-ms-filter: "progid:DXImageTransform.Microsoft.gradient(startColorstr=#99000000, endColorstr=#99000000)";
}
This is from CSS background transparency without affecting child elements, through RGBa and filters.
Screenshots proof of results:
This is when using the following code:
<head>
<meta http-equiv="X-UA-Compatible" content="IE=edge" >
<title>An XHTML 1.0 Strict standard template</title>
<meta http-equiv="content-type" content="text/html;charset=utf-8" />
<style type="text/css" media="all">
.transparent-background-with-text-and-images-on-top {
background: rgb(0, 0, 0) transparent; /* Fallback for web browsers that doesn't support RGBa */
background: rgba(0, 0, 0, 0.6); /* RGBa with 0.6 opacity */
filter:progid:DXImageTransform.Microsoft.gradient(startColorstr=#99000000, endColorstr=#99000000); /* For IE 5.5 - 7*/
-ms-filter: "progid:DXImageTransform.Microsoft.gradient(startColorstr=#99000000, endColorstr=#99000000)"; /* For IE 8*/
}
</style>
</head>
<body>
<div class="transparent-background-with-text-and-images-on-top">
<p>Here some content (text AND images) "on top of the transparent background"</p>
<img src="http://i.imgur.com/LnnghmF.gif">
</div>
</body>
</html>
This is the best solution I could come up with, NOT using CSS 3. And it works great on Firefox, Chrome, and Internet Explorer as far as I can see.
Put a container div and two children divs at the same level, one for content, one for the background.
And using CSS, auto-size the background to fit the content and put the background actually in the back using z-index.
.container {
position: relative;
}
.content {
position: relative;
color: White;
z-index: 5;
}
.background {
position: absolute;
top: 0px;
left: 0px;
width: 100%;
height: 100%;
background-color: Black;
z-index: 1;
/* These three lines are for transparency in all browsers. */
-ms-filter: "progid:DXImageTransform.Microsoft.Alpha(Opacity=50)";
filter: alpha(opacity=50);
opacity: .5;
}
<div class="container">
<div class="content">
Here is the content.
<br/>Background should grow to fit.
</div>
<div class="background"></div>
</div>
For a simple semi-transparent background color, the above solutions (CSS3 or bg images) are the best options. However, if you want to do something fancier (e.g. animation, multiple backgrounds, etc.), or if you don't want to rely on CSS3, you can try the “pane technique”:
.pane, .pane > .back, .pane > .cont { display: block; }
.pane {
position: relative;
}
.pane > .back {
position: absolute;
width: 100%; height: 100%;
top: auto; bottom: auto; left: auto; right: auto;
}
.pane > .cont {
position: relative;
z-index: 10;
}
<p class="pane">
<span class="back" style="background-color: green; opacity: 0.6;"></span>
<span class="cont" style="color: white;">Hello world</span>
</p>
The technique works by using two “layers” inside of the outer pane element:
one (the “back”) that fits the size of the pane element without affecting the flow of content,
and one (the “cont”) that contains the content and helps determine the size of the pane.
The position: relative on pane is important; it tells back layer to fit to the pane's size. (If you need the <p> tag to be absolute, change the pane from a <p> to a <span> and wrap all that in a absolutely-position <p> tag.)
The main advantage this technique has over similar ones listed above is that the pane doesn't have to be a specified size; as coded above, it will fit full-width (normal block-element layout) and only as high as the content. The outer pane element can be sized any way you please, as long as it's rectangular (i.e. inline-block will work; plain-old inline will not).
Also, it gives you a lot of freedom for the background; you're free to put really anything in the back element and have it not affect the flow of content (if you want multiple full-size sub-layers, just make sure they also have position: absolute, width/height: 100%, and top/bottom/left/right: auto).
One variation to allow background inset adjustment (via top/bottom/left/right) and/or background pinning (via removing one of the left/right or top/bottom pairs) is to use the following CSS instead:
.pane > .back {
position: absolute;
width: auto; height: auto;
top: 0px; bottom: 0px; left: 0px; right: 0px;
}
As written, this works in Firefox, Safari, Chrome, IE8+, and Opera, although IE7 and IE6 require extra CSS and expressions, IIRC, and last time I checked, the second CSS variation does not work in Opera.
Things to watch out for:
Floating elements inside of the cont layer will not be contained. You'll need to make sure they are cleared or otherwise contained, or they'll slip out of the bottom.
Margins go on the pane element and padding goes on the cont element. Don't do use the opposite (margins on the cont or padding on the pane) or you'll discover oddities such as the page always being slightly wider than the browser window.
As mentioned, the whole thing needs to be block or inline-block. Feel free to use <div>s instead of <span>s to simplify your CSS.
A fuller demo, showing off the flexibility of this technique by using it in tandem with display: inline-block, and with both auto & specific widths/min-heights:
.pane, .pane > .back, .pane > .cont { display: block; }
.pane {
position: relative;
width: 175px; min-height: 100px;
margin: 8px;
}
.pane > .back {
position: absolute; z-index: 1;
width: auto; height: auto;
top: 8px; bottom: 8px; left: 8px; right: 8px;
}
.pane > .cont {
position: relative; z-index: 10;
}
.debug_red { background: rgba(255, 0, 0, 0.5); border: 1px solid rgba(255, 0, 0, 0.75); }
.debug_green { background: rgba(0, 255, 0, 0.5); border: 1px solid rgba(0, 255, 0, 0.75); }
.debug_blue { background: rgba(0, 0, 255, 0.5); border: 1px solid rgba(0, 0, 255, 0.75); }
<p class="pane debug_blue" style="float: left;">
<span class="back debug_green"></span>
<span class="cont debug_red">
Pane content.<br/>
Pane content.
</span>
</p>
<p class="pane debug_blue" style="float: left;">
<span class="back debug_green"></span>
<span class="cont debug_red">
Pane content.<br/>
Pane content.<br/>
Pane content.<br/>
Pane content.<br/>
Pane content.<br/>
Pane content.<br/>
Pane content.<br/>
Pane content.<br/>
Pane content.
</span>
</p>
<p class="pane debug_blue" style="float: left; display: inline-block; width: auto;">
<span class="back debug_green"></span>
<span class="cont debug_red">
Pane content.<br/>
Pane content.
</span>
</p>
<p class="pane debug_blue" style="float: left; display: inline-block; width: auto; min-height: auto;">
<span class="back debug_green"></span>
<span class="cont debug_red">
Pane content.<br/>
Pane content.
</span>
</p>
And here's a live demo of the technique being used extensively:
There is a trick to minimize the markup: Use a pseudo element as the background and you can set the opacity to it without affecting the main element and its children:
DEMO
Output:
Relevant code:
p {
position: relative;
}
p:after {
content: '';
position: absolute;
top: 0;
left: 0;
width: 100%;
height: 100%;
background: #fff;
-ms-filter: "progid:DXImageTransform.Microsoft.Alpha(Opacity=50)";
opacity: .6;
z-index: -1;
}
/*** The following is just for demo styles ***/
body {
background: url('http://i.imgur.com/k8BtMvj.jpg') no-repeat;
background-size: cover;
}
p {
width: 50%;
padding: 1em;
margin: 10% auto;
font-family: arial, serif;
color: #000;
}
img {
display: block;
max-width: 90%;
margin: .6em auto;
}
<p>Lorem ipsum dolor sit amet, consectetur adipiscing elit. Sed a ligula ut nunc dignissim molestie.
<img src="http://i.imgur.com/hPLqUtN.jpg" alt="" />
</p>
Browser support is Internet Explorer 8 and later.
pseudo elements
opacity
It's better to use a semi-transparent .png.
Just open Photoshop, create a 2x2 pixel image (picking 1x1 can cause an Internet Explorer bug!), fill it with a green color and set the opacity in "Layers tab" to 60%. Then save it and make it a background image:
<p style="background: url(green.png);">any text</p>
It works cool, of course, except in lovely Internet Explorer 6. There are better fixes available, but here's a quick hack:
p {
_filter: expression((runtimeStyle.backgroundImage != 'none') ? runtimeStyle.filter = 'progid:DXImageTransform.Microsoft.AlphaImageLoader(src='+currentStyle.backgroundImage.split('\"')[1]+', sizingMethod=scale)' : runtimeStyle.filter,runtimeStyle.backgroundImage = 'none');
}
This method allows you to have an image in the background and not only a solid color, and can be used to have transparency on other attributes such as borders. No transparent PNG images are required.
Use :before (or :after) in CSS and give them the opacity value to leave the element at its original opacity. Thus you can use :before to make a faux element and give it the transparent background (or borders) you want and move it behind the content you want to keep opaque with z-index.
An example (fiddle) (note that the DIV with class dad is just to provide some context and contrast to the colors, this extra element is actually not needed, and the red rectangle is moved a bit down and to the right to leave visible the background behind the fancyBg element):
<div class="dad">
<div class="fancyBg">
Test text that should have solid text color lets see if we can manage it without extra elements
</div>
</div>
with this CSS:
.dad {
background: lime; border: 1px double black; margin: 1ex 2ex;
padding: 0.5ex; position: relative; -k-z-index: 5;
}
.fancyBg {
border: 1px dashed black; position: relative; color: white; font-weight: bold;
z-index: 0; /*background: black;*/
}
.fancyBg:before {content:'-'; display: block;
position: absolute; background: red; opacity: .5;
top: 2ex; right: -2ex; bottom: -2ex; left: 2ex;
/*top: 0; right: 0; bottom: 0; left: 0;*/
z-index: -1;
}
In this case .fancyBg:before has the CSS properties you want to have with transparency (red background in this example, but can be an image or borders). It's positioned as absolute to move it behind .fancyBg (use values of zero or whatever is more appropriate for your needs).
The easiest method would be to use a semi-transparent background PNG image.
You can use JavaScript to make it work in Internet Explorer 6 if you need to.
I use the method outlined in Transparent PNGs in Internet Explorer 6.
Other than that, you could fake it using two side-by-side sibling elements - make one semi-transparent, then absolutely position the other over the top.
Almost all these answers assume the designer wants a solid color background. If the designer actually wants a photo as the background the only real solution at the moment is JavaScript like the jQuery Transify plugin mentioned elsewhere.
What we need to do is join the CSS working group discussion and make them give us a background-opacity attribute! It should work hand in hand with the multiple-backgrounds feature.
The problem is, that the text actually has full opacity in your example. It has full opacity inside the p tag, but the p tag is just semi-transparent.
You could add an semi-transparent PNG background image instead of realizing it in CSS, or separate text and div into two elements and move the text over the box (for example, negative margin).
Otherwise it won't be possible.
Just like Chris mentioned: if you use a PNG file with transparency, you have to use a JavaScript workaround to make it work in the pesky Internet Explorer...
Here's how I do this (it might not be optimal, but it works):
Create the div that you want to be semi-transparent. Give it a class/id. Leave it empty, and close it. Give it a set height and width (say, 300 pixels by 300 pixels). Give it an opacity of 0.5 or whatever you like, and a background color.
Then, directly below that div, create another div with a different class/id. Create a paragraph inside it, where you'll place your text. Give the div position: relative, and top: -295px (that's negative 295 pixels). Give it a z-index of 2 for good measure, and make sure its opacity is 1. Style your paragraph as you like, but make sure the dimensions are less than that of the first div so it doesn't overflow.
That's it. Here's the code:
.trans {
opacity: 0.5;
height: 300px;
width: 300px;
background-color: orange;
}
.trans2 {
opacity: 1;
position: relative;
top: -295px;
}
.trans2 p {
width: 295px;
color: black;
font-weight: bold;
}
<body>
<div class="trans">
</div>
<div class="trans2">
<p>
text text text
</p>
</div>
</body>
This works in Safari 2.x, but I don't know about Internet Explorer.
If you are a Photoshop guy, you can also use:
#some-element {
background-color: hsla(170, 50%, 45%, 0.9); // **0.9 is the opacity range from 0 - 1**
}
Or:
#some-element {
background-color: rgba(170, 190, 45, 0.9); // **0.9 is the opacity range from 0 - 1**
}
Here is a jQuery plugin that will handle everything for you, Transify (Transify - a jQuery plugin to easily apply transparency / opacity to an element’s background).
I was running into this problem every now and then, so I decided to write something that would make life a lot easier. The script is less than 2 KB and it only requires one line of code to get it to work, and it will also handle animating the opacity of the background if you like.
A while back, I wrote about this in Cross Browser Background Transparency With CSS.
Bizarrely Internet Explorer 6 will allow you to make the background transparent and keep the text on top fully opaque. For the other browsers I then suggest using a transparent PNG file.
Opacity of background, but not the text has some ideas. Either use a semi-transparent image, or overlay an additional element.
CSS 3 has an easy solution of your problem. Use:
background-color:rgba(0, 255, 0, 0.5);
Here, rgba stands for red, green, blue, and alpha value. The green value is obtained because of 255 and half transparency is obtained by a 0.5 alpha value.
In order to make the background of an element semi-transparent, but have the content (text & images) of the element opaque, you need to write CSS code for that image, and you have to add one attribute called opacity with minimum value.
For example,
.image {
position: relative;
background-color: cyan;
opacity: 0.7;
}
// The smaller the value, the more it will be transparent, ore the value less will be transparency.
If you're using Less, you can use fade(color, 30%).
background-color: rgba(255, 0, 0, 0.5); as mentioned above is the best answer simply put. To say use CSS 3, even in 2013, is not simple because the level of support from various browsers changes with every iteration.
While background-color is supported by all major browsers (not new to CSS 3) [1] the alpha transparency can be tricky, especially with Internet Explorer prior to version 9 and with border color on Safari prior to version 5.1. [2]
Using something like Compass or SASS can really help production and cross platform compatibility.
[1] W3Schools: CSS background-color Property
[2] Norman's Blog: Browser Support Checklist CSS3 (October 2012)
You can solve this for Internet Explorer 8 by (ab)using the gradient syntax. The color format is ARGB. If you are using the Sass preprocessor you can convert colors using the built-in function "ie-hex-str()".
background: rgba(0,0,0, 0.5);
-ms-filter: "progid:DXImageTransform.Microsoft.gradient(startColorstr='#80000000', endColorstr='#80000000')";
<div align="center" style="width:100%;height:100%;background:white;opacity:0.5;position:absolute;z-index:1001">
<img id="search_img" style="margin-top:20%;" src="../resources/images/loading_small.gif">
</div>
http://jsfiddle.net/x2ukko7u/?
You can use the opacity value appended to the hexadecimal value:
background-color: #11ffeeaa;
In this example aa is the opacity. An opacity of 00 means transparent and ff means solid color.
The opacity is optional, so you can use the hexadecimal value as always:
background-color: #11ffee;
You can also use the old way with rgba():
background-color: rgba(117, 190, 218, 0.5);
And the background shorthand if you want to make sure that the background has no other styles, like images or gradients:
background: #11ffeeaa;
From the Mozilla's specification (https://developer.mozilla.org/en-US/docs/Web/CSS/background-color):
/* Keyword values */
background-color: red;
background-color: indigo;
/* Hexadecimal value */
background-color: #bbff00; /* Fully opaque */
background-color: #bf0; /* Fully opaque shorthand */
background-color: #11ffee00; /* Fully transparent */
background-color: #1fe0; /* Fully transparent shorthand */
background-color: #11ffeeff; /* Fully opaque */
background-color: #1fef; /* Fully opaque shorthand */
/* RGB value */
background-color: rgb(255, 255, 128); /* Fully opaque */
background-color: rgba(117, 190, 218, 0.5); /* 50% transparent */
/* HSL value */
background-color: hsl(50, 33%, 25%); /* Fully opaque */
background-color: hsla(50, 33%, 25%, 0.75); /* 75% transparent */
/* Special keyword values */
background-color: currentcolor;
background-color: transparent;
/* Global values */
background-color: inherit;
background-color: initial;
background-color: unset;
There's an easier solution to put an overlay over an image on the same div. It's not the right use of this tool. But works like a charm to make that overlay using CSS.
Use an inset shadow like this:
box-shadow: inset 0 0 0 1000px rgba(255, 255, 255, 0.9);
That's all :)
I normally use this class for my work. It's pretty good.
.transparent {
filter: alpha(opacity=50); /* Internet Explorer */
-khtml-opacity: 0.5; /* KHTML and old Safari */
-moz-opacity: 0.5; /* Firefox and Netscape */
opacity: 0.5; /* Firefox, Safari, and Opera */
}
It worked for me when using the format #AARRGGBB so the one working for me was #1C00ff00. Give it a try, because I have seen it working for some and not working for someone else. I am using it in CSS.
Since a lot of people will arrive here wanting to know how to adjust the opacity of any element (not just backgrounds), it's as simple as adding opacity: 0.2 (or whatever number between 0 and 1 you desire) to that element's CSS.
Example
.myclass {
color: #eb4746;
opacity: 0.2;
}
This can be used in backgrounds and in headers, paragraphs etc.
I agree with all above answers and rgba is the way to go. In my case, I was provided with a hex background programmatically, so I will have to generate my own rgba based on the hex code. I created a modified version of Mr. Down's answer to convert hex to rgba
function hexToRgba(hex,alpha) {
// Expand shorthand form (e.g. "03F") to full form (e.g. "0033FF")
var shorthandRegex = /^#?([a-f\d])([a-f\d])([a-f\d])$/i;
hex = hex.replace(shorthandRegex, function(m, r, g, b) {
return r + r + g + g + b + b;
});
var result = /^#?([a-f\d]{2})([a-f\d]{2})([a-f\d]{2})$/i.exec(hex);
if(result!=null){
const r = parseInt(result[1], 16);
const g = parseInt(result[2], 16);
const b = parseInt(result[3], 16);
//
return `rgba(${r},${g},${b},${alpha})`;
}
return null;
}
I think this gives you desired output:
div {
width: 200px;
height: 200px;
display: block;
position: relative;
}
div::after {
content: "";
background: url(image.jpg);
opacity: 0.5;
top: 0;
left: 0;
bottom: 0;
right: 0;
position: absolute;
z-index: -1;
}
This gives the desired result -
body {
background-image: url("\images\dark-cloud.jpg");
background-size: 100% 100%;
background-attachment: fixed;
opacity: .8;
}
Setting the opacity of the background.
I've got the following website:
beta.leifsigersen.com
There's a movie on the front page which sometimes takes a little while to load (sometimes less than a second, sometimes a few seconds). Before the movie is loaded there's black background/borders. How can I change the color of this?
I've tried to use CSS of the video-element, but without any luck.
Try this CSS:
.pk_video {
background-color: red !important; /* or whatever you want */
}
Just add the background color to the html code itself. For example:
<video width="100%" height="100%" style="background-color: #fff;" src=""></video>
So i had this annoying white bar, I got rid of it using. I applied it the the containing div.
background-color: transparent;
Alternatively use
background-color: rgba(0, 0, 0, 0);
Hope that helps
I have used overlay content like so: Ionic/Angular
.html
<video autoplay muted loop playsinline preload="auto" onloadedmetadata="this.muted = true">
<source [src]="video" type="video/mp4" />
</video>
<div class="overlay-content"></div>
.scss
video {
object-fit: cover;
width: 100vw;
height: 60vh;
top: 0;
left: 0;
opacity: 0.5;
-webkit-filter: blur(5px);
-moz-filter: blur(5px);
-o-filter: blur(5px);
-ms-filter: blur(5px);
filter: blur(5px);
}
.overlay-content {
position: absolute;
top: 0;
left: 0;
background: rgba(6, 56, 82, 0.5);
width: 100vw;
height: 60vh;
}
This question already has answers here:
How do I reduce the opacity of an element's background using CSS?
(29 answers)
Closed 6 years ago.
I am using something similar to the following code:
<div style="opacity:0.4; background-image:url(...);">
<div style="opacity:1.0;">
Text
</div>
</div>
I expected this to make the background have an opacity of 0.4 and the text to have 100% opacity. Instead they both have an opacity of 0.4.
Children inherit opacity. It'd be weird and inconvenient if they didn't.
You can use a translucent PNG file for your background image, or use an RGBa (a for alpha) color for your background color.
Example, 50% faded black background:
<div style="background-color:rgba(0, 0, 0, 0.5);">
<div>
Text added.
</div>
</div>
You can use pseudo-elements ::before or ::after to get a semi-transparent background and you can do this with just one container. Use something like this:
<article>
Text.
</article>
Then apply some CSS:
article {
position: relative;
z-index: 1;
}
article::before {
content: "";
position: absolute;
top: 0;
left: 0;
width: 100%;
height: 100%;
opacity: .4;
z-index: -1;
background: url(path/to/your/image);
}
Example:
body {
background: red;
}
article {
position: relative;
z-index: 1;
}
article:before {
content: " ";
position: absolute;
top: 0;
left: 0;
width: 100%;
height: 100px;
opacity: .4;
z-index: -1;
background: url(https://31.media.tumblr.com/8ec07e49f33088c2e32c158ca4262eb2/tumblr_n5wav6Tz4R1st5lhmo1_1280.jpg);
}
<article>
Text.
</article>
Note: You might need to adjust the z-index values.
The following methods can be used to solve your problem:
CSS alpha transparency method (doesn't work in Internet Explorer 8):
#div{background-color:rgba(255,0,0,0.5);}
Use a transparent PNG image according to your choice as background.
Use the following CSS code snippet to create a cross-browser alpha-transparent background. Here is an example with #000000 # 0.4% opacity
.div {
background:rgb(0,0,0);
background: transparent\9;
background:rgba(0,0,0,0.4);
filter:progid:DXImageTransform.Microsoft.gradient(startColorstr=#66000000,endColorstr=#66000000);
zoom: 1;
}
.div:nth-child(n) {
filter: none;
}
For more details regarding this technique, see this, which has an online CSS generator.
I would do something like this
<div class="container">
<div class="text">
<p>text yay!</p>
</div>
</div>
CSS:
.container {
position: relative;
}
.container::before {
position: absolute;
top: 0;
left: 0;
bottom: 0;
right: 0;
background: url('/path/to/image.png');
opacity: .4;
content: "";
z-index: -1;
}
It should work. This is assuming you are required to have a semi-transparent image BTW, and not a color (which you should just use rgba for). Also assumed is that you can't just alter the opacity of the image beforehand in Photoshop.
You can use Sass' transparentize.
I found it to be the most useful and plain to use.
transparentize(rgba(0, 0, 0, 0.5), 0.1) => rgba(0, 0, 0, 0.4)
transparentize(rgba(0, 0, 0, 0.8), 0.2) => rgba(0, 0, 0, 0.6)
See more: #transparentize($color, $amount) ⇒ Sass::Script::Value::Color
.transbg{/* Fallback for web browsers that don't support RGBa */
background-color: rgb(0, 0, 0);
/* RGBa with 0.6 opacity */
background-color: rgba(0, 0, 0, 0.6);
/* For IE 5.5 - 7*/
filter:progid:DXImageTransform.Microsoft.gradient(startColorstr=#99000000, endColorstr=#99000000);
/* For IE 8*/
-ms-filter: "progid:DXImageTransform.Microsoft.gradient(startColorstr=#99000000, endColorstr=#99000000)";}
This is because the inner div has 100% of the opacity of the div it is nested in (which has 40% opacity).
In order to circumvent it, there are a few things you could do.
You could create two separate divs like so:
<div id="background"></div>
<div id="bContent"></div>
Set your desired CSS opacity and other properties for the background and use the z-index property (z-index) to style and position the bContent div. With this you can place the div overtope of the background div without having it's opacity mucked with.
Another option is to RGBa. This will allow you to nest your divs and still achieve div specific opacity.
The last option is to simply make a semi transparent .png image of the color you want in your desired image editor of choice, set the background-image property to the URL of the image and then you won't have to worry about mucking about with the CSS and losing the capability and organization of a nested div structure.
Just make sure to put width and height for the foreground the same with the background, or try to have top, bottom, left and right properties.
<style>
.foreground, .background {
position: absolute;
}
.foreground {
z-index: 1;
}
.background {
background-image: url(your/image/here.jpg);
opacity: 0.4;
}
</style>
<div class="foreground"></div>
<div class="background"></div>