I am creating .net core 2.1 MVC application and using Azure database for MySQL DB 5.7.
I have read below links but seems they are applicable for MS SQL DB.
https://learn.microsoft.com/en-us/azure/mysql/concepts-high-availability
https://learn.microsoft.com/en-us/azure/architecture/best-practices/retry-service-specific
Transient handling for MySQL not possible? Help me link to MYSQL related similar pages.
A transient error, also known as a transient fault, is an error that will resolve itself. Most typically these errors manifest as a connection to the database server being dropped. Also new connections to a server can't be opened. Transient errors can occur for example when hardware or network failure happens.
Transient errors should be handled using retry logic. Situations that must be considered:
An error occurs when you try to open a connection
An idle connection is dropped on the server side. When you try to issue a command it can't be executed
An active connection that currently is executing a command is dropped.
The first and second case are fairly straight forward to handle. Try to open the connection again. When you succeed, the transient error has been mitigated by the system. You can use your Azure Database for MySQL again. We recommend having waits before retrying the connection. Back off if the initial retries fail. This way the system can use all resources available to overcome the error situation. A good pattern to follow is:
Wait for 5 seconds before your first retry.
For each following retry, the increase the wait exponentially, up to 60 seconds.
Set a max number of retries at which point your application considers the operation failed.
Read more here.
And you can read more on how to troubleshoot connection issues to Troubleshoot connection issues to Azure Database for MySQL here.
I have two FireDAC connections on my application, one is intended to be used on a MySQL Server that is on LAN and store private data of the my shop (like sales, products, etc), and the another one is connected to a remote (internet) MySQL Server, and it randomly give me a exception
First chance exception at $745AA882. Exception class
EMySQLNativeException with message '[FireDAC][Phys][MySQL] Lost
connection to MySQL server during query'.
Is this a issue on FireDAC, my code or the remote MySQL Server?
Using NAVICAT software I have no problem.
This error usually occurs because the Internet Connectivity is not stable and connection closed during exchanging data
Sometimes you can solve this issue with increasing the connection Time-Out (and ReadTimeOut )
Sometimes this error occurs because you are trying to send or receive large amount of data like Blob fields and you should increase the max_allowed_packet variable of MySQL Server to solve the problem
The next suggestion for solving this problem is avoiding dns lookup by adding skip-name-resolve to the settings of your MySQL Server
The Main reasons of this problem is connection stability and MySQL Server Settings
If you have access to MySQL server and can change the settings, this link may be useful :
http://www.monitis.com/blog/101-tips-to-mysql-tuning-and-optimization/
You can find many articles about increasing performance of MySQL Server
I am running Ghost as a web service on Microsoft azure. I am using MySql Database for storage instead of the default Sqlite. Every time i open the blog i get a Econnreset error with status as 500, and Sql query is being shown.
I have MySql Running in a virtual machine. But everything works out fine on refresh. I am also using connection pooling.
How to rectify this, or what can be the probable reason for Ghost to drop connection with database.
Solved the problem. Issue is with the underlying Knex MySql Driver. When the connection remains Idle Azure closes the connection, when the request is made again knex does not check if the connection is still there or not leading to Econnreset Error.
You can fix this by setting min number of connections to be zero in knex.
For more details follow this issue:
https://github.com/tgriesser/knex/issues/975
Is the mysql database hosted on another azure instance ?
If so you will need to make it available to the outside (Open the required ports).
I've always used Mongo with Node, but now due to an existing datasource I need to connect a node app with Mysql.
Sequelize seems a good solution, but I don't get how to handle connection error, reconnection and re-tries.
To check for connection error on first run .authenticate().then().catch(function(error){...});
But what if I loose connection and want to reconnect?
There is an open issue for this in Sequelize:
https://github.com/sequelize/sequelize/issues/2113
Based on that, this error is handled in sequelize.
I verified the version 4.11.1 of sequelize has this issue fixed.
The queries will fail when the database server is down, but will recover to reconnect and succeed when the database server is up.
(You don't need to restart the application as faced with previous versions.)
Closed. This question is not reproducible or was caused by typos. It is not currently accepting answers.
This question was caused by a typo or a problem that can no longer be reproduced. While similar questions may be on-topic here, this one was resolved in a way less likely to help future readers.
Closed 6 years ago.
Improve this question
I'm getting a SQL Server error:
A transport-level error has occurred
when receiving results from the
server. (provider: Shared Memory
Provider, error: 0 - The handle is
invalid.)
I'm running Sql Server 2008 SP1, Windows 2008 Standard 64 bit.
It's a .Net 4.0 web application. It happens when a request is made to the server. It's intermittent. Any idea how I can resolve it?
The database connection is closed by the database server. The connection remains valid in the connection pool of your app; as a result, when you pickup the shared connection string and try to execute it's not able to reach the database. If you are developing Visual Studio, simply close the temporary web server on your task bar.
If it happens in production, resetting your application pool for your web site should recycle the connection pool.
Try the following command on the command prompt:
netsh interface tcp set global autotuning=disabled
This turns off the auto scaling abilities of the network stack
I had the same problem. I restarted Visual Studio and that fixed the problem
Transport level errors are often linked to the connection to sql server being broken ... usually network.
Timeout Expired is usually thrown when a sql query takes too long to run.
So few options can be :
Check for the connection in VPN (if used) or any other tool
Restart IIS
Restart machine
Optimize sql queries.
For those not using IIS, I had this issue when debugging with Visual Studio 2010. I ended all of the debugger processes: WebDev.WebServer40.EXE which solved the issue.
All you need is to Stop the ASP.NET Development Server and run the project again
If you are connected to your database via Microsoft SQL Server Management, close all your connections and retry.
Had this error when connected to another Azure Database, and worked for me when closed it.
Still don't know why ..
Look at the MSDN blog which details out this error:
Removing Connections
The connection pooler removes a connection from the pool after it has
been idle for a long time, or if the pooler detects that the
connection with the server has been severed.
Note that a severed connection can be detected only after attempting
to communicate with the server. If a connection is found that is no
longer connected to the server, it is marked as invalid.
Invalid connections are removed from the connection pool only when
they are closed or reclaimed.
If a connection exists to a server that has disappeared, this
connection can be drawn from the pool even if the connection pooler
has not detected the severed connection and marked it as invalid.
This is the case because the overhead of checking that the connection
is still valid would eliminate the benefits of having a pooler by
causing another round trip to the server to occur.
When this occurs, the first attempt to use the connection will detect
that the connection has been severed, and an exception is thrown.
Basically what you are seeing is that exception in the last sentence.
A connection is taken from the connection pool, the application does
not know that the physical connection is gone, an attempt to use it is
done under the assumption that the physical connection is still there.
And you get your exception.
There are a few common reasons for this.
The server has been restarted, this will close the existing connections.
In this case, have a look at the SQL Server log, usually found at:
C:\Program Files\Microsoft SQL Server\\MSSQL\LOG
If the timestamp for startup is very recent, then we can suspect that
this is what caused the error. Try to correlate this timestamp with
the time of exception.
2009-04-16 11:32:15.62 Server Logging SQL Server messages in file
‘C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\LOG\ERRORLOG’.
Someone or something has killed the SPID that is being used.
Again, take a look in the SQL Server log. If you find a kill, try to
correlate this timestamp with the time of exception.
2009-04-16 11:34:09.57 spidXX Process ID XX was killed by
hostname xxxxx, host process ID XXXX.
There is a failover (in a mirror setup for example) again, take a look in the SQL Server log.
If there is a failover, try to correlate this timestamp with the time
of exception.
2009-04-16 11:35:12.93 spidXX The mirrored database “” is changing roles from “PRINCIPAL” to “MIRROR” due to
Failover.
Was getting this, always after about 5 minutes of operation. Investigated and found that a warning from e1iexpress always occurred before the failure. This apparently is an error having to do with certain TCP/IP adapters. But changing from WiFi to hardwired didn't affect it.
So tried Plan B and restarted Visual Studio. Then it worked fine.
On closer study I noticed that, when working correctly, the message The Thread '<No Name>' has exited with code 0 occurred at almost exactly the time the run crashed in previous attempts. Some Googling reveals that that message comes up when (among other things) the server is trimming the thread pool.
Presumably there was a bogus thread in the thread pool and every time the server attempted to "trim" it it took the app down.
You get this message when your script make SQL Service stopped for some reasons. so if you start SQL Service again perhaps your problem will be resolved.
I know this may not help everyone (who knows, maybe yes), but I had the same problem and after some time, we realized that the cause was something out of the code itself.
The computer trying to reach the server, was in another network, the connection could be established but then dropped.
The way we used to fix it, was to add a static route to the computer, allowing direct access to the server without passing thru the firewall.
route add –p YourServerNetwork mask NetworkMask Router
Sample:
route add –p 172.16.12.0 mask 255.255.255.0 192.168.11.2
I hope it helps someone, it's better to have this, at least as a clue, so if you face it, you know how to solve it.
I got the same error in Visual Studion 2012 development environment, stopped the IIS Express and rerun the application, it started working.
I had the same issue. I solved it, truncating the SQL Server LOG.
Check doing that, and then tell us, if this solution helped you.
For me the solution was totally different.
In my case I had an objectsource which required a datetimestamp parameter. Even though that ODS parameter ConvertEmptyStringToNull was true 1/1/0001 was being passed to SelectMethod. That in turn caused a sql datetime overflow exception when that datetime was passed to the sql server.
Added an additional check for datetime.year != 0001 and that solved it for me.
Weird that it would throw a transport level error and not a datetime overflow error.
Anyways..
In my case the "SQL Server" Server service stopped. When I restarted the service that enabled me to run the query and eliminate the error.
Its also a good idea to examine your query to find out why the query made this service stop
For me the answer is to upgrade the OS from 2008R2 to 2012R2, the solution of iisreset or restart apppool didn't work for me.
I also tried to turn of TCP Chimney Offload setting, but I didn't restart the server because it is a production server, which didn't work either.
We encountered this error recently between our business server and our database server.
The solution for us was to disable "IP Offloading" on the network interfaces.
Then the error went away.
One of the reason I found for this error is 'Packet Size=xxxxx' in connection string. if the value of xxxx is too large, we will see this error. Either remove this value and let SQL server handle it or keep it low, depending on the network capabilities.
It happened to me when I was trying to restore a SQL database and checked following Check Box in Options tab,
As it's a stand alone database server just closing down SSMS and reopening it solved the issue for me.
This occurs when the database is dropped and re-created some shared resources is still considering the database still exists, so when you re-run execute query to create tables in the database after it was re-created the error will not show again and Command(s) completed successfully. message will show instead of the error message Msg 233, Level 20, State 0, Line 0 A transport-level error has occurred when sending the request to the server. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.).
Simply ignore this error when you are dropping and recreating databases and re-execute your DDL queries with no worries.
I faced the same issue recently, but i was not able to get answer in google.
So thought of sharing it here, so that it can help someone in future.
Error:
While executing query the query will provide few output then it will throw below error.
"Transport level error has occurred when receiving output from
server(TCP:provider,error:0- specified network name is no longer
available"
Solution:
Check the provider of that linked server
In that provider properties ,Enable "Allow inprocess" option for that particular provider to fix the issue.