I am getting below error in SSIS package while doing the mapping with destination table.
Exception from HRESULT: 0xC0202040
Error at Target etl [vw_Fact_PartnerDeal [194]]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x8007000E.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x8007000E Description: "Not enough memory resources are available to complete this operation."
Can someone please suggest on this.
Related
TITLE: Package Validation Error
Package Validation Error
ADDITIONAL INFORMATION:
Error at Data Flow Task 1 [EA OLE DB Source [191]]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "ea.prenlyn.net.ROWriter.RowReadOnly3P" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Error at Data Flow Task 1 [SSIS.Pipeline]: EA OLE DB Source failed validation and returned error code 0xC020801C.
Error at Data Flow Task 1 [SSIS.Pipeline]: One or more component failed validation.
Error at Data Flow Task 1: There were errors during task validation.
Error at Package [Connection manager "ea.prenlyn.net.ROWriter.RowReadOnly3P"]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft OLE DB Driver for SQL Server" Hresult: 0x80004005 Description: "Login timeout expired".
An OLE DB record is available. Source: "Microsoft OLE DB Driver for SQL Server" Hresult: 0x80004005 Description: "A network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information see SQL Server Books Online.".
An OLE DB record is available. Source: "Microsoft OLE DB Driver for SQL Server" Hresult: 0x80004005 Description: "Named Pipes Provider: Could not open a connection to SQL Server [53]. ".
(Microsoft.DataTransformationServices.VsIntegration)
BUTTONS:
OK
Created a data flow with 3 sources of db from different OLE DB. Just try to disconnect one OLE DB and SSIS will not proceed. Is there a solution to not include the OLE DB that goes offline?
I have a job ssis that truncate a table and insert into this table.
When i launch the package in visual studio, all works well but when I put the job on sql server and launch it with ssms, it doesn't works. there is a primary key conflict when inserting..so i'm asking why its working in visual studio and not on sql management studio..
I log one table after the truncate and the count return 0 rows..so the truncable command works well.
I use the same user to launch the package in visual studio or ssms.
I use ole db datasource and destination.
here is the complete error message :
Executed as user: DOMAIN\USER. Microsoft (R) SQL Server Execute Package Utility Version 13.0.5149.0 for 64-bit Copyright (C) 2016 Microsoft. All rights reserved. Started: 14:46:04 Error: 2018-10-11 14:46:08.01 Code: 0xC0202009 Source: Data Flow Component OLE DB Destination [104] Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "The statement has been terminated.". An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Violation of PRIMARY KEY constraint 'PK_STA_TABLE'. Cannot insert duplicate key in object 'dbo.STA_TABLE'. The duplicate key value is (19).". End Error Error: 2018-10-11 14:46:08.01 Code: 0xC0209029 Source: Data Flow Component OLE DB Destination [104] Description: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "OLE DB Destination.Inputs[OLE DB Destination Input]" failed because error code 0xC020907B occurred, and the error row disposition on "OLE DB Destination.Inputs[OLE DB Destination Input]" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure. End Error Error: 2018-10-11 14:46:08.01 Code: 0xC0047022 Source: Data Flow Component SSIS.Pipeline Description: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "OLE DB Destination" (104) failed with error code 0xC0209029 while processing input "OLE DB Destination Input" (117). The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure. End Error Error: 2018-10-11 14:46:09.50 Code: 0xC02020C4 Source: Data Flow Component Data Source T_TABLE [2] Description: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020. End Error Error: 2018-10-11 14:46:09.50 Code: 0xC0047038 Source: Data Flow Component SSIS.Pipeline Description: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on Data Source T_TABLE returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 14:46:04 Finished: 14:46:10 Elapsed: 5.781 seconds. The package execution failed. The step failed.
Thank you.
We are getting the below errors when the SSIS package is deployed and executed.
the SSIS package contains Excel as a source.
Data Flow Task:Error: SSIS Error Code
DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The
AcquireConnection method call to the connection manager "Excel
Connection Manager" failed with error code 0xC0209303. There may be
error messages posted before this with more information on why the
AcquireConnection method call failed.
Package:Error: The requested OLE DB provider Microsoft.Jet.OLEDB.4.0
is not registered. If the 64-bit driver is not installed, run the
package in 32-bit mode. Error code: 0x00000000. An OLE DB record is
available. Source: "Microsoft OLE DB Service Components" Hresult:
0x80040154 Description: "Class not registered"
I created a new package today, it gets info passed down from a Master package that runs other packages as well. My master package pulls the connection info from a config file at runtime. Protection level = DontSaveSensitive. Using Windows Authentication. It works fine locally but when I run it from a job it gives me the error below.
Any ideas or constructive comments are welcome!
Code: 0xC0202009 Source: DFT - Insert Into StageSites Source DB TEICommon [1] Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80040E14 Description: "Statement(s) could not be prepared.". An OLE DB record is available. Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80040E14 Description: "Invalid column name 'SuspendedDate'.". An OLE DB record is available. Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80040E14 Description: "Invalid column name 'FirstShipmentDate'.". End Error Error: 2016-10-28 10:38:02.50 Code: 0xC004706B Source: DFT - Insert Into StageSites SSIS.Pipeline Description: "component "Source DB TEICommon" (1)" failed validation and returned validation status "VS_ISBROKEN". End Error Error: 2016-10-28 10:38:02.50 Code: 0xC004700C Source: DFT - Insert Into StageSites SSIS.Pipeline Description: One or more component failed validation. End Error Error: 2016-10-28 10:38:02.50 Code: 0xC0024107 Source: DFT - Insert Into StageSites Description: There were errors during task validation. End Error
Update: [Fixed]
I solved the issue by updating my schema in the database my ETL query was pulling from.
Here are your actual errors:
"Invalid column name 'SuspendedDate'.".
"Invalid column name 'FirstShipmentDate'.".
You are querying a table (in the component Insert Into StageSites) , expecting those columns to exist when they do not. Since you say it works locally but not from a job, the most likely explanation is that your DataSource is connecting to a different server when the job runs it than the one it connects to locally. Check the connection string in the .config file on the server that the job points to.
I am building an SSIS package and getting an error when setting "Name of the table or the view" in the OLE DB Destination editor.
SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred.
Error code: 0x8007000E. An OLE DB record is available.
Source: "Microsoft SQL Native Client 10.0" Hresult: 0x8007000E
Description: "Not enough storage is available to complete this operation.".
Failed to open a fastload rowset for "[dbo].[MyTable]".
Check that the object exists in the database.
Exception from HRESULT: 0xC0202040 (Microsoft.SqlServer.DTSPipelineWrap)
But, the table is definately there.
What could be causing this error?
Try saving the package and exiting from BIDS. Then start again, and try fixing the destination component.
It's only complaining about the table because it was in the process of handling that table at the time of the Out of Memory exception. It has a one track mind about that - failure setting up table == table does not exist.