We are getting the below errors when the SSIS package is deployed and executed.
the SSIS package contains Excel as a source.
Data Flow Task:Error: SSIS Error Code
DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The
AcquireConnection method call to the connection manager "Excel
Connection Manager" failed with error code 0xC0209303. There may be
error messages posted before this with more information on why the
AcquireConnection method call failed.
Package:Error: The requested OLE DB provider Microsoft.Jet.OLEDB.4.0
is not registered. If the 64-bit driver is not installed, run the
package in 32-bit mode. Error code: 0x00000000. An OLE DB record is
available. Source: "Microsoft OLE DB Service Components" Hresult:
0x80040154 Description: "Class not registered"
Related
TITLE: Package Validation Error
Package Validation Error
ADDITIONAL INFORMATION:
Error at Data Flow Task 1 [EA OLE DB Source [191]]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "ea.prenlyn.net.ROWriter.RowReadOnly3P" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Error at Data Flow Task 1 [SSIS.Pipeline]: EA OLE DB Source failed validation and returned error code 0xC020801C.
Error at Data Flow Task 1 [SSIS.Pipeline]: One or more component failed validation.
Error at Data Flow Task 1: There were errors during task validation.
Error at Package [Connection manager "ea.prenlyn.net.ROWriter.RowReadOnly3P"]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft OLE DB Driver for SQL Server" Hresult: 0x80004005 Description: "Login timeout expired".
An OLE DB record is available. Source: "Microsoft OLE DB Driver for SQL Server" Hresult: 0x80004005 Description: "A network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information see SQL Server Books Online.".
An OLE DB record is available. Source: "Microsoft OLE DB Driver for SQL Server" Hresult: 0x80004005 Description: "Named Pipes Provider: Could not open a connection to SQL Server [53]. ".
(Microsoft.DataTransformationServices.VsIntegration)
BUTTONS:
OK
Created a data flow with 3 sources of db from different OLE DB. Just try to disconnect one OLE DB and SSIS will not proceed. Is there a solution to not include the OLE DB that goes offline?
I have setup a SSIS package to copy over some data from one table to another. At first I tried doing from one server to another server, did not succeed. Then I tried it doing within the same server, no luck again. I followed couple tutorials/videos how to do it and followed the exact pattern.
However here's what I tried to do:
Create a "Data Flow Task"
Under "Data Flow" tab create an "OLE DB Source" and "OLE DB Destination"
Configure the "OLE DB connection manager" and setup the column mapping, verify connection status for both source and destination
When I run the package I get following errors
Here are the 5 errors that are in the above figure,
[OLE DB Destination 2] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "STLEDGSQL01.MES_DEV" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
[SSIS.Pipeline] Error: OLE DB Destination failed validation and returned error code 0xC020801C.
[SSIS.Pipeline] Error: One or more component failed validation.
Error: There were errors during task validation.
[Connection manager "STLEDGSQL01.MES_DEV"] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "A network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information see SQL Server Books Online.".
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Client unable to establish connection".
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Registry information is corrupt or missing. Make sure the provider is installed and registered correctly.".
Now I have tried applying couple of solution that I found in stackoverflow and out in the internet, such as following but nothing helped me so far.
Set delay validation property at package level to True from false
Change ProtectionLevel to EncryptSensitiveWithUserKey
Any help is greatly appreciated!
For anyone who's interested or had the same issue as mine, I just found the answer. I was using the wrong TargetServerVersion in project properties. My SQL server is 2016 and it was defaulted to 2019 automatically in this property page. I did change it back to 2016 and yes it all starts working.
I suggest that you do not use SSIS to move data around inside a database. Just use a stored prcedure or script. Here is a sample script that will copy data from one table to another, but only for data that doesn't exist in the target.
insert into targettable (PrimaryKeyColumn,Column1,Column2,Column3)
select PrimaryKeyColumn,Column1,Column2,Column3
from sourcetable SRC
where not exists (
select *
from targettable TGT
where TGT.PrimaryKeyColumn = SRC.PrimaryKeyColumn
)
I am getting below error in SSIS package while doing the mapping with destination table.
Exception from HRESULT: 0xC0202040
Error at Target etl [vw_Fact_PartnerDeal [194]]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x8007000E.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x8007000E Description: "Not enough memory resources are available to complete this operation."
Can someone please suggest on this.
I have edited my entire question, first my question was how to execute the SSIS Package, but now I have got the solution to execute it via SQL Server Agent job but when I am trying to execute the SQL Server Agent job, I am getting error , when I viewed in history then following message is shown
Job failed. Job was evoked by the user. Last step to run was step 1.
please note the table where I am inserting the data into database via SSIS package in SQL Express, is it SQL Express creating problem.
---------Updated Error Message-------------
The following error message is seen when I expand log file of SQL Server Agent job,
Executed as user: NT Service\SQLAgent$SQL_Server_Evalu. Microsoft(R) SQL Server Execute Package utility Version 11.0.2100.60 for 64 bit copyright (C) Microsoft Corporation. All right reserved started: 16:11:39 Package Execution on IS Server failed. Execution ID:4, Execution Status:4.
Below is the screen shot how I execute the SQL Server Agent job,
------------Updated error message------------
Below is the screen shot of the error message that are given while execution of the deployed package.
Errors are as follows:
1) Data Flow Task Error: There were errors during task validation.
2) Data Flow Task Error: OLE DB Destination failed validation and return error code 0XC020801C.
3) Data Flow Task Error: One more component failed.
4) Data Flow Task Error: SSIS Error Code
DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER
The AcquireConnection method call to the connection manager "RESHMAJADHAV\SQLEXPRESS.Adventureworks2012" failed with error code 0XC0202009.
5) Package Error: SSIS Error Code DTS_E_OLEDBERROR. An OLEDB error has occured. Error Code: 0X80004005. An OLE DB record is available. source: "Microsoft SQL Server Native Client 11.0" Hresult: 0X80004005 Description:"Login failed for user 'NTSERVICE\SQLAgGENT$SQL_SERVER_EVALU'.". An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0X80004005 Description:"Cannot open Database" AdventureWorks2012"
requested by login. The login failed"
Is it because of the connection string
"Data Source=RESHMAJADHAV\SQLEXPRESS;Initial Catalog=AdventureWorks2012;Provider=SQLNCLI11.1;Integrated Security=SSPI;Auto Translate=False;"
That I have defined in environmental variables in Integration Service Catalog I am unable to open the database..?
Any help will be greatly apprecaiated...
Data Source=RESHMAJADHAV\SQLEXPRESS;User ID=XXXXXXX;Password=XXXXXXXXX;Initial Catalog=AdventureWorks2012;Provider=SQLOLEDB;
for the destination connection. I think job is not getting the end user name and password.
It might help. I f not can you please post the exact error message. I am no able to see anything form the picture..
Thanks
i have created one SSIS package for importing data from Excel to Sql DB.
i also deployed it on SQL SERVER Instance,but when i am runing that package throw job its gives some error.
ERROR: "Microsoft (R) SQL Server Execute Package Utility Version 10.50.2500.0 for 32-bit Copyright (C) Microsoft Corporation 2010.
All rights reserved. Started: 11:03:12 Error: 2013-03-19 11:03:12.84 Code: 0xC0202009
Source: Package2 Connection manager "Excel Connection Manager" Description: SSIS Error Code DTS_E_OLEDBERROR.
An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available.
Source: "Microsoft JET Database Engine" Hresult: 0x80004005
Description: "The Microsoft Jet database engine cannot open the file ''.
It is already opened exclusively by another user<c/> or you need permission to view its data.".
End Error Error: 2013-03-19 11:03:12.84 Code: 0xC020801C
Source: Creating Staging for Data Excel Data Source [1]
Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER.
The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009.
There may be error messages posted before this with more information on why the AcquireConnection method call failed.
End Error Error: 2013-03-19 11:03:12.84 Code: 0xC0047017
Source: Creating Staging for Data SSIS.Pipeline
Description: component "Excel Data Source" (1) failed validation and returned error code 0xC020801C.
End Error Error: 2013-03-19 11:03:12.84 Code: 0xC004700C
Source: Creating Staging for Data SSIS.Pipeline Description: One or more component failed validation.
End Error Error: 2013-03-19 11:03:12.84 Code: 0xC0024107
Source: Creating Staging for Data Description: There were errors during task validation.
End Error DTExec: The package execution returned DTSER_FAILURE (1).
Started: 11:03:12 Finished: 11:03:12 Elapsed: 0.219 seconds.
The package execution failed. The step failed.,00:00:00,0,0,,,,0
I am using 32 bit OS,.XLS Excel file for import,which is MS EXCEL 2003.
I need solution cananybody help me....???
The reason your package is failing is because you have the excel file open. Close the file and try running the package again.
Error Message: "The Microsoft Jet database engine cannot open the file ''.
It is already opened exclusively by another user or you need permission to view its data.".