I'm Running Cucumber feature file with Scenario outline feature and Examples keyword , while runnin the testing getting junit cucumber internalizing error
please help me out
**Scenario Outline: Launch and Login CRM Application with simple data driven with examples**
Given user is already on Login Page
When title of login page is Free CRM
Then I should login into the application with "<UserName>" as username and "<PassWord>" as password
And close the applciation
Examples:
|UserName |PassWord |
|parthipan**#gmail.com|*****|
If the * characters aren't part of the styling for this site (for the Scenario Outline line), I would say that the reason it in't finding the test is due to that.
The * characters will be fine for just the description (after the Scenario Outline:)
If it isn't due to this, then we'll need more information (perhaps a dump of the stack trace) to be able to help
Related
I am unable to get the remote command option on zabbix 6 for some reason any ideas?Operation description
if anyone can assist me i have worked through all the user manuals and they don't mention something about requirements on this drop down.
In version 6, commands are available for execution if previously defined in global scripts with Action operation selected as its scope.
In the previous versions, you just needed to select "remote command" as "operation type".
See https://www.zabbix.com/documentation/current/en/manual/config/notifications/action/operation#configuring-an-operation
Zabbix support came back with the answer on this and this is what you need to do.
Please be advised that In Zabbix 6.0 to use Scripts in Operations step you need to create such Scripts in Administration - Scripts section in Zabbix Frontend and set
Scope to Action operation:
enter image description here
Then this Script will be available in your Operations steps:enter image description here
So basically there is a seprate section to go and create your scripts and assign them to the action you want to take.
I'm using CasperJS for automated UI tests. I've done the basic UI testing and validation with some random data, kind of POC. I've set up this automation using bash script which kicks to start the web server, load MySQL data from SQL file, start CasperJS test cases, stop the web server, check the log files.
Now, I want to start the testing with some good known status of data which are stored in MySQL. So that I can test the list data and form data with detailed field information with some known database status. How should I know the status of data in the database at a moment?
1) Should I use pre-populated JSON dumped file which has status and details about all data?
2) Should I use web service API? (web service APIs are being used to show/save/delete data from the web page)
Let's take an example. I've 5 users in Users table. Now when I open the home page it shows 5 users with some rough details. When I click on any record from the list of users, it shows a form with detailed information about that user. The webpage is requesting to the web application to get the detail about a user with the help of user_id to show the detailed user data in a form. Now I want to check that all the data in that form is populated correctly. So at the next step, what would be the preferred way, should I read content from JSON dumped file or should I use web service API (like webpage does).
Searching this problem online, I also found MYSQL HTTP plugin. Should I consider this as well? and How safe it is to use? (I know from the docs that this plugin is not for the production, it is just for testing purpose only. :) )
For the main question in cases like this I would change the database connection string to your testing database (this is a clone).
In your case use your bash script to change the connection string (file copy?) automatically before you run the tests. And when completed change back.
Your testing database is a direct clone of your dev/live databsae but with ONLY the test data you want. Downside is you need to keep the schema in sync with DEV/LIVE.
Also another point to take into considertion is if your testing changes state (post). If so your testing data might be out of sync. One way is get around this is to drop foreign keys, truncate the data and load in a dump file.
HTH
I am working with TS-7500 (ARM 9) board running Debian Linux (Linux ts7500 2.6.24.4). It is connected to a couple of sensors and is running driver code to talk to these sensors.
Every time the C program starts, it reads a couple of config-parameters from a config-file and starts sensors with those values.
So the task at hand is : presenting a web interface to show/edit these config-parameters to user. The task of the web interface can be summarized in four steps :
Read config-parameters from the config-file and show the current configuration
Allow user to change the configuration
Capture and save the changes to same config-file
These config-parameters could be presented as drop-down menu items or radio-buttons. And I have a linux background script which restarts the C prg when config-file is modified.
I know TS-7500 runs Tomcat. Now please suggest a good way to handle this problem. I have heard about using Servlet and JSPs (am not very familiar with those actually). Which one of them is suitable to generate HTML pages dynamically ? (as I see everytime I need to generate a new HTML page by selecting the current configuration while displaying the page).
Sorry for being very elaborate !
EDIT : Beeps ! No reply ? Come on guyz, is the question not clear ? Or no one has ever faced a similar problem (design problem) ??
The solution would be to use a PHP in addition with Apache web server ! PHP script could be used to
Read the config file and capturing the parameters
Generate a HTML form (by pre-selecting the dropdown menus and radio buttons from the already read parameters)
And capturing the new edits and saving them to config file.
PHP script must be placed in /var/www/ directory of the embedded board. Then from any system, it could be accessed just by keying the IP address of the board and the script name using a simple web browser.
I have started a new Lightswitch project using a SQL database that was created with Lightswitch. When I publish and install the new Desktop project everything goes fine with no errors in publishing, installing or loading the new application. The first and only screen appears. I can click on different records and the data shows up and I can edit the data. However, if I use the list search function all of the fields get Red x'd.
The original application works the way it supposed to work.
I have tried with and without IIS: Published with (local) and (IIS) and get the same results with both methods.
The connecection string options for the new app are not the same as the original in that System Admin and Sytem user connecection strings are not offered so it is difficult to know if I replicating a working setup or not.
In Mananagement Studio I am awash in security, permissions, roles, and login selecitons. It seems clear that this is permission level problem but I have no idea on where to start trouble shooting.
see:
Diagnosing Problems in a Deployed 3-Tier LightSwitch Application
http://blogs.msdn.com/b/lightswitch/archive/2011/09/20/diagnosing-problems-in-a-deployed-lightswitch-application-eric-erhardt.aspx
How many string properties are in the table that you're displaying? Is there a large number of properties that don't need to be included in the search?
This forum post discusses the same issue as you're encountering: Search returns error "Unable to load data" with a Red X
Have you checked your connection string setup? I do have those issues back when I was using SQL Express on development and using SQL Server Enterprise as my target database server.
I'm trying to write 2 simple tests for my website. It's my first time doing this, and I'm running into a bit of an issue
The test specs are super simple: just fill_in the email + password fields, then I click "signup" or "login" based on which I am testing.
I am facing several issues sadly:
After the click_on("...") call, I have a page.should have_content call. But this never seems to succeed. Selenium closes firefox before I see a successful sign up or login.
For login, I'm not sure how to make sure that the test is using my local database. I am on mysql, and I know my DB is running (I can run queries on mysql administrator), but I don't know if the login is using my DB, and I don't know if the signup is actually putting a new record in my DB.
Thanks a lot for your help in advance!
Ringo
Rspec will use a different database as development and production.
You can check the name of the database in config/database.yml with the environment 'test'.
To see the page which is testing, you can call the method save_and_open_page.
It will open a page in your browser and you will be able to know what's going on.