I used to use the XML endpoint because it provided review dates for each review called 'updated'. This is not contained in the JSON endpoint. However, the XML endpoint stopped working. I get the error seen below:
Web Server Error
Description: The host did not return the document correctly.
Has anyone experienced the same issue? Any workarounds? Do you anticipate this will ever be fixed by Apple? Do you think the JSON endpoint might be taken down any time soon?
XML Endpoint (Broken)
https://itunes.apple.com/us/rss/customerreviews/id=1145275343/mostrecent/xml
JSON Endpoint (Working)
https://itunes.apple.com/us/rss/customerreviews/id=1145275343/mostrecent/json
It appears the XML endpoint is up and running again. No more Web Server Error. Hopefully the endpoint stays up.
I am implementing paypal REST integration for a new platform
I got stuck and would apprecıate any help
The interesting problem I get is the REST request I copied from the documentation page gives error. https://developer.paypal.com/docs/rest/api/payments/
I am not using command line but a little windows app to send web requests.
I just used exact same payload and got this error
The remote server returned an error: (503) Server Unavailable.
{"name":"INTERNAL_SERVICE_ERROR","information_link":"https://api.sandbox.paypal.com/docs/api/#INTERNAL_SERVICE_ERROR","debug_id":"c4a8716d8a791"}
The C# sample from the github works and when I use th json it generated everything works ok.
I found out that if I change the cardnumber the sample works. Will let paypal team now.
I have this json feed.
I am unable to load this into Appgyver
I have set the following required settings:
- parameter app_name with the correct value
- added the reuired header X-DREAMFACTORY-APPLICATION-NAME
I always get the Oops, Unable to load resource's data model. error
Anyone who has a clue?
I am not very familiar with AppGyver, but I know it's been used with DreamFactory successfully by others. You have not provided enough information, but I will attempt to give you troubleshooting steps from the DreamFactory side.
First, are you definitely authenticating and passing a valid X-DreamFactory-Session-Token header? I can tell that you don't have guest access enabled (to make calls without authentication) because when I navigate to your link I receive a 401 with "There is no valid session for the current request."
Second, what is the call you're making from AppGyver? Is it a GET to simply list resources of a DB called vlaamse_vinyl, or what?
Finally, if you are passing X-DreamFactory-Application-Name in addition to the URI parameter ?app_name=vlaamse_vinyl this is redundant. Perhaps that is preventing your call from succeeding.
I've set up a MediaWiki server on an Azure website with the PluggableAuth and OpenID Connect extensions. The latter uses the PHP OpenID Connect Basic Client library. I am an administrator in the Azure AD domain example.com, wherein I've created an application with App ID URI, sign-on URL and reply URL all set to https://wiki.azurewebsites.net/. When I navigate to the wiki, I observe the following behavior (cookie values omitted for now):
Client Request
GET https://wiki.azurewebsites.net/ HTTP/1.1
RP Request
GET https://login.windows.net/example.com/.well-known/openid-configuration
IP Response
(some response)
RP Response
HTTP/1.1 302 Moved Temporarily
Location: https://login.windows.net/{tenant_id}/oauth2/authorize?response_type=code&redirect_uri=https%3A%2F%2Fwiki.azurewebsites.net%2F&client_id={client_id}&nonce={nonce}&state={state}
Client Request
(follows redirect)
IP Response
HTTP/1.1 302 Found
Location: https://wiki.azurewebsites.net/?code={code}&state={state}&session_state={session_state}
Client Request
(follows redirect)
RP Request (also repeats #2 & #3)
POST https://login.windows.net/{tenant_id}/oauth2/token
grant_type=authorization_code&code={code}&redirect_uri=https%3A%2F%2Fwiki.azurewebsites.net%2F&client_id={client_id}&client_secret={client_secret}
IP Response
(As interpreted by MediaWiki; I don't have the full response logged at this time)
AADSTS50001: Resource identifier is not provided.
Note that if I change the OpenID PHP client to provide the 'resource' parameter in step 8, I get the following error response from AAD instead:
RP Request
POST https://login.windows.net/{tenant_id}/oauth2/token
grant_type=authorization_code&code={code}&redirect_uri=https%3A%2F%2Fwiki.azurewebsites.net%2F&resource=https%3A%2F%2Fwiki.azurewebsites.net%2F&client_id={client_id}&client_secret={client_secret}
IP Response
AADSTS90027: The client '{client_id}' and resource 'https://wiki.azurewebsites.net/' identify the same application.
(This has come up before.)
Update
I've made some progress based on #jricher's suggestions, but after working through several more errors I've hit one that I can't figure out. Once this is all done I'll submit pull requests to the affected libraries.
Here's what I've done:
I've added a second application to the example.com Azure AD domain, with the App ID URI set to mediawiki://wiki.azurewebsites.net/, as a dummy "resource". I also granted the https://wiki.azurewebsites.net/ application delegated access to this new application.
Passing in the dummy application's URI as the resource parameter in step #8, I'm now getting back the access, refresh, and ID tokens in #9!
The OpenID Connect library requires that the ID token be signed, but while Azure AD signs the access token it doesn't sign the ID token. It comes with the following properties: {"typ":"JWT","alg":"none"}. So I had to modify the library to allow the caller to specify that unsigned ID tokens are considered "verified". Grrr.
Okay, next it turns out that the claims can't be verified because the OpenID Provider URL I specified and the issuer URL returned in the token are different. (Seriously?!) So, the provider has to be specified as https://sts.windows.net/{tenant_id}/, and then that works.
Next, I found that I hadn't run the MediaWiki DB upgrade script for the OpenID Connect extension yet. Thankfully that was a quick fix.
After that, I am now left with (what I hope is) the final problem of trying to get the user info from AAD's OpenID Connect UserInfo endpoint. I'll give that its own section.
Can't get the user info [Updated]
This is where I am stuck now. After step #9, following one or two intermediate requests to get metadata and keys for verifying the token, the following occurs:
RP Request:
(Updated to use GET with Authorization: Bearer header, per MSDN and the spec.)
GET https://login.windows.net/{tenant_id}/openid/userinfo
Authorization: Bearer {access_token}
IP Response:
400 Bad Request
AADSTS50063: Credential parsing failed. AADSTS90010: JWT tokens cannot be used with the UserInfo endpoint.
(If I change #10 to be either a POST request, with access_token in the body, or a GET request with access_token in the query string, AAD returns the error: AADSTS70000: Authentication failed. UserInfo token is not valid. The same occurs if I use the value of the id_token in place of the access_token value that I received.)
Help?
Update
I'm still hoping someone can shed light on the final issue (the UserInfo endpoint not accepting the bearer token), but I may split that out into a separate question. In the meantime, I'm adding some workarounds to the libraries (PRs coming soon) so that the claims which are already being returned in the bearer token can be used instead of making the call to the UserInfo endpoint. Many thanks to everyone who's helped out with this.
There's also a nagging part of me that wonders if the whole thing would not have been simpler with the OpenID Connect Basic Profile. I assume there's a reason why that was not implemented by the MediaWiki extension.
Update 2
I just came across a new post from Vittorio Bertocci that includes this helpful hint:
...in this request the application is asking for a token for itself! In Azure AD this is possible only if the requested token is an id_token...
This suggests that just changing the token request type in step 8 from authorization_code to id_token could remove the need for the non-standard resource parameter and also make the ugly second AAD application unnecessary. Still a hack, but it feels like much less of one.
Justin is right. For authorization code grant flow, your must specify the resource parameter in either the authorization request or the token request.
Use &resource=https%3A%2F%2Fgraph.windows.net%2F to get an access token for the Azure AD Graph API.
Use &resource=https%3A%2F%2Fmanagement.core.windows.net%2F to get a token for the Azure Service Management APIs.
...
Hope this helps
Microsoft's implementation of OpenID Connect (and OAuth2) has a known bug where it requires the resource parameter to be sent by the client. This is an MS-specific parameter and requiring it unfortunately breaks compatibility with pretty much every major OAuth2 and OpenID Connect library out there. I know that MS is aware of the issue (I've been attempting to do interoperability testing with their team for quite a while now), but I don't know of any plans to fix the problem.
So in the mean time, your only real path is to hack your client software so that it sends a resource parameter that the AS will accept. It looks like you managed to make it send the parameter, but didn't send a value that it liked.
I had issues getting this running on Azure, even though I got something working locally. Since I was trying to setup a private wiki anyway, I ended up enabling Azure AD protection for the whole site by turning on:
All Settings -> Features -> Authentication / Authorization
From within the website in https://portal.azure.com
This made it so you had to authenticate to Azure-AD before you saw any page of the site. Once you were authenticated a bunch of HTTP Headers are set for the application with your username, including REMOTE_USER. As a result I used the following plugin to automatically log the already authenticated user into Azure:
https://www.mediawiki.org/wiki/Extension:Auth_remoteuser
I called attached code below in WinJS app and keep getting this error 405 Method Not Allowed. I have changed the method property to "POST" , still the same thing. Some of the guys saying it is to do with the permission so I am trying to set the credential in the uploader. This is an internal app so we assume this should carry the Windows Authentication. But at the moment, I could not find how. Can anybody help?
uploader.createUpload(endpoint, file)
.startAsync()
You haven't narrowed down the problem to the point where you should be worrying about how to express what you need with BackgroundTransfer APIs yet - you need to figure out what you need to express, first.
If you have access to good documentation or a knowledgeable owner of this internal service you're connecting to, your first step should be consulting that to figure out what exactly the HTTP request (and the associated credential headers) should look like.
If you don't have access to that, the second best starting point is to take an existing, working client of this service you're uploading to and use a networking capture software (Fiddler, for example) to take a look at what the request it's sending looks like.
Once you've figured out the specific HTTP method and server credentials you need to use, you can tell BackgroundTransfer to use them by setting the method and serverCredential properties of your uploader object before creating your uploads.