I'm trying to publish https://bintray.com/mvysny/github/com.github.kaributesting onto JCenter, but the process fails with "Failed to send a message: The version control git returns 404.". Any tips on this please? Bintray, could you please make your error messages a bit more specific?
The reason was that I simply had "git" stated in the Version control field. The field's hint says it should be URL but the field is not validated, so git was accepted. I think it's supposed to point to the sources of the project. When I changed that to https://github.com/mvysny/karibu-testing it worked.
Related
I'm attempting to add a badge to my GitHub repo showing the status of unit tests. I followed the guide, shown here, and produced the following change to my repo:
[](https://github.com/xefino/goutils/actions)
However, when I navigate to the repo's page on GitHub, I see that the action shows "No Status". I understand, from this question, that the name described in the workflow's YAML file has to match the URL, which mine does. So I'm having trouble understanding why I'm not seeing a status on the badge. Does anyone have any information on this?
I discovered the issue here. My URL was not actually correct, not because of some typo, but because the format had changed. So, doing this worked:
[](https://github.com/xefino/goutils/actions)
I am trying to see configuration page of the KNIME node which i just published to my KNIME analytics tool.
Getting error "Error while creating node dialog for 'Readadwords': The configName must be a non-empty string" where Readadwords is my node dialog class which i created in eclipse.
Either in my Nodemodel or Nodedialog there is not a single config and i have defaulted it some or other string value.
Can some one help me where to look to fix my error and also please let me know if i can debug my knime plugin from eclipse rather than doing it in Analytics tool.
Debugging is explained in their developer guide, this page is the most relevant for that.
When you save your settings you have not specified the key for your config, that is what this error message is about. Like in this place assuming "" were used instead of "colName", I would expect a similar error message.
Issue is KNIME is not picking up the changes i have done to the code and i had to change version in plugin.xml file then it started working after copying new jar file to dropins folder of KNIME
When I try to run my Windows Store app, it won't, and shows me this:
..."does not support the contract specified"? What contract? I'm not implementing any contract; I assume it means the Settings contract or some such, but I'm not doing any of those yet.
I went to the Help page suggested, and it says, in part, "To diagnose these errors
There are no sure ways to fix these errors. Use these techniques to diagnose the problem."
The first suggestion is:
Open Event Viewer (on the Windows Start menu, search for Event Viewer.) In Event Viewer, navigate in the tree to the Application and Services Log\Microsoft\Windows\Apps folder.
Filter the view to event Ids: 5900-6000
Examine the log and see what occurred.
Windows 8.1 only brings up web pages when I search for "Event Viewer"
Actually, I did write a utility to catch event logs, and I ran that. I found these:
***Type: Error
Source: Microsoft-Windows-Immersive-Shell
Time Generated: 11/27/2014 15:10:39
Message: Activation of app App.adaf78a74.a8c80.a4ff5.a99ca.a97636d548196_8wekyb3d8bbwe!Designer.App failed with error: -2144927148 See the Microsoft-Windows-TWinUI/Operational log for additional information.
Type: Error
Source: Microsoft-Windows-Immersive-Shell
Time Generated: 11/27/2014 15:20:08
Message: Activation of app axXAndSpace.Visits_qtyjefqf75sa6!App failed with error: -2144927148 See the Microsoft-Windows-TWinUI/Operational log for additional information.***
But where is "Microsoft-Windows-TWinUI/Operational log"?
The second suggestion on the Help page was:
Use the native debugger
Configure the project to run under a native debugger.
In Visual Studio, set the Debugger Type to Native Only on the Debug (Debugging in C++ and JavaScript) page of the property pages of the start-up project.
Look at the exceptions being thrown by looking at the output window. You might want to configure the debugger to stop when these exceptions are thrown.
I did that, but it gave me no more information than previously - nothing at all displays in the Output pane.
What could be the cause of this?
UPDATE
Just to update the progress:
Based on Iris Classon's suggestions, I went to Control Panel to see if my app was installed so that I could uninstall it, but it's not in that list.
If I search for the app by typing its name, it tries to start up - its splash screen displays, but goes no further than that.
I went to Program Files\WindowsApps, and when selecting it got, "You don't currently have persimmons to access this folder, click continue to continually get access"
That leads me to "You have been denied permission to access this folder; to gain access to this folder, you will need to use the security tab"
Click the "security tab" link takes me to that tab, and a "For special permissions or advanced settings, click Advanced"
I do so.
That takes me to a Permissions tab, which says, "You must have Read permissions to view the properties of this object; Click continue to attempt the operation with administrative permissions"
I then selected (one at a time, as that is all it allows):
Trusted Installer : Full control
System: Read, Write, and Execute
System: Full Control
Administrators: Read & Execute
But so far, none of that seems to do anything good.
UPDATE 2
This problem has just "gone away" today; I don't think it was anything I did. I added a UserControl, tried running the app again, and now it runs - I don't see that error message. However, I do see a seemingly unrelated one. (at least I got further).
I just had this problem on a fresh install of Windows 8.1 on my laptop. I'm not sure which one of these steps solved it, but until somebody can give you a more exact answer here is something to try as I am sure you are keen on coding.
Only Store Apps run from VS gives that error, other Store apps work fine.
I first of all changed permissions on my WindowsApps folder under Program Files and made sure that I had full access to the folder and sub folders. Restarted the laptop, still no luck.
Then I set up an admin guest account (just something I tend to do for when I need to record tutorials- so not related to trying to solve the error). Out of curiosity I tried to create and run the same Windows Store App and got an error that another user had installed the app. Strange, how was it installed if it gave me the error that it couldn't activate the app on the main account?
I logged back in as the main user and uninstalled the application (which was showing up as installed), and I can now run any Store App from VS without problems.
Not sure this is an answer since I'm not sure what made it work, but give it a try and hopefully somebody else can clear this us up. I'll investigate further, but I'm on a train right now with poor WiFi connection :)
Best of luck!
I had the same scenario, here are the steps I did to resolve:
I tried to create packages, chose not to associate with the store.
It said that the certificate is expired, I created a new test certificate.
I created the test packages successfully.
Tried to run the project from VS and it finally ran.
I believe all of this had to do with the certificate. very frustrating and time wasting issue.
I also had the same problem and following steps fixed it. Hope it will help some one else.
Open the appxmanifest file
Go to "Packaging" tab
Select "Choose Certificate" and select "Pick from certificate store" and select your cetificate and click on ok
During packaging the Windows Store application, I get an unspecified error [APPX1204]:
C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\AppxPackage\Microsoft.AppXPackage.Targets(1139,9): error APPX1204: Failed to sign 'D:\Projects\VS2012\Stroik\Stroik\AppPackages\Stroik_1.0.0.11_AnyCPU_Test\Stroik_1.0.0.11_AnyCPU.appx'. SignTool Error: An unexpected internal error has occurred.
Build output refers to the part of a file generated by VS2012:
<SignAppxPackage AppxPackageToSign="#(FinalAppxPackageItem)"
CertificateThumbprint="$(PackageCertificateThumbprint)"
CertificateFile="$(PackageCertificateKeyFile)"
HashUri="$(_HashUri)"
EnableSigningChecks="$(EnableSigningChecks)"
>
<Output TaskParameter="ResolvedThumbprint" PropertyName="ResolvedThumbPrint"/>
<Output TaskParameter="AppxPackagePublicKeyFile" PropertyName="AppxPackagePublicKeyFile" />
</SignAppxPackage>
Yesterday packaging proceeded successfully. Today I added aditional logic to my app and changed some data in manifest. Since then I'm reciving presented error. I tried to regenerate Certificate in Packaging menu, delete Store/Temporary Keys (then regenerate), ... much more but nothing helps.
Now I have no idea how to handle it. Furthermore packaging a new project (as it is provided by vs2012) results in the same error.
Have you got any suggestions how to solve it.
If it helps anyone else, I was trying to make the build on a network share (virtualizing windows). Creating it on the Windows partition solved the issue.
I was developing on a Virtual Machine in VirtualBox and tryed to publish to the shared folder.
Change the output folder to a local folder on the virtual maschine solved it.
Granted this is older - see if you can try it with a different live id
You could also try to generate a new app, and diff the manifests between the apps.
Now according to:
http://social.msdn.microsoft.com/Forums/en-US/toolsforwinapps/thread/f25939fb-c48c-4bd0-938e-6a0afbd2dca0/
you may want to sign out, use IE 'in safe private browsing' and create a new one.
Also ensure that IE is set in "Browsing History->Settings" to get a new version of the page every time.
Login with the new one and give it a try.
I'm not sure if this error is related here or not, but it's a starting point based on the prior feedback on the above post.
This japanese site lists the same error code and seems to have the same resolution as well
http://coelacanth.heteml.jp/blog/windows-8signtool-error-an-unexpected-internal-error-has-occurred/
Its worth a shot, but I'll admit on this one not being 100% sure, just trying to help out : )
Sorry for the cross-post, but I received no answer at serverfault.
I've set up a Mercurial server on a Win2k3 box with IIS6, using hgwebdir_wsgi, and it does seem to work until the point where I can see a nice list of my repositories in a browser, but if I try to browse any of them (that is, I click the name of the repo), then I get a 404 error.
Any ideas about what I might be doing wrong? What log files or whatever should I check (I'm kinda new to IIS)? Thanks.
--
Some update:
The actual error code in the IIS logs is 404.0.2. A win32 error code of 2 simply means "file not found".
The event viewer is full of ISAPI errors like these:
The description for Event ID ( 4097 ) in Source ( ISAPI Filter or Extension ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Factory function '__FilterFactory__' failed, n/a.
Could not load all ISAPI filters for site/service. Therefore startup aborted.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
The description for Event ID ( 4096 ) in Source ( ISAPI Filter or Extension ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Filter version function failed!, n/a.