I have different datablocks to show the results of a query. This query gets the input parameters from two lists selected by the user.
I want to change the view after the query depending on the parameters introduced, so I made different tables and change the properties before showing the results.
Example:
IF :BLOCK.EST_TRAMITA = '1' AND :BLOCK.EST_TIPO = '2' THEN
SET_ITEM_PROPERTY('FEFOR',VISIBLE,PROPERTY_TRUE);
ELSE
SET_ITEM_PROPERTY('FEFOR',VISIBLE,PROPERTY_FALSE);
END IF;
The problem is that I have to put all the tables in the same place so the editor is getting messy. Is there a better way to change the visible elements without overlapping the tables in the editor? Thanks
You can create two canvasses and each canvas on the same place.
And then use show_view to show the canvas you need.
You also have to take in account that you should create on the correct item a key-next-item trigger and key-prev-item and also at block level a key-nxtblk and a key-prvblk trigger. Because otherwise you could get in the items in the other canvas by going over the items or using the key next block.
Related
I'm wondering if anyone has come across this issue.
I have two radio buttons on a canvas app that I am attempting to control the values displayed within a list box.
RadioButtons.Items: ["SomeValueA","SomeValueB"]
The list box control should be getting reset whenever the value of the radio button changes.
UpdateContext({resetList: !resetList});
UpdateContext({resetList: !resetList});
Reset(lbListbox);
lbListbox.Reset: resetList
For the list box itself I have the following for Items:
Switch(
RadioButtons.Selected.Value,
"SomeValueA",
Sort(
EntityA.FieldName,
Descending
),
"SomeValueB",
Sort(
EntityB.'Some other field name',
Descending
)
)
The problem is when I select 'SomeValueA' the list box properly populates with the values from EntityA.FieldName but when I then select 'SomeValueB' from the radio buttons the list box blanks out with empty records. There appears to be items in the list box that I can scroll through and select but not see.
If I put two list boxes on the screen and set their Items event to the specific entity the values show up properly in both list boxes so I know the entity naming/field is correct.
I've tried it without the reset of the list box, I've tried it using collections made out of the entity records.
Has anyone come across this who maybe has a solution. I was going to try to put two list boxes on top of one another and either hide/show or bring to front the active list but that also doesn't want to work.
thanks!
(Received this post from another source, figured I might as well post back here as well)
Got this to work, but it was a bit finicky. The catch seemed to be giving the List a value-pairing table, instead of just a list of values.
First I collected the Option Sets from CDS, and added a column to indicate the source name, for reference. This could easily be combined into a single collection, and then filtered later but I was thinking simple.
ClearCollect(colOptionSet1,AddColumns(Choices('Ownership (Accounts)'),"appSource","Ownership"));
ClearCollect(colOptionSet2,AddColumns(Choices('Preferred Method of Contact (Accounts)'),"appSource","Preferred Method"));
Next added a Radio button identical to yours.
Then added a List control with Items equal to
If( Radio1.Selected.Value = "SomeValueA", colOptionSet1, Radio1.Selected.Value = "SomeValueB", colOptionSet2 )
You may need to use the right-side property pane to toggle between Value and "appSource" (from collections above), but this did allow me to toggle between two separate Option Set fields in a single list.
Patching/writing this back is gonna be another hurdle. 😝
I have a report containing a Tablix/table with sets of rows and columns which I am hiding conditionally using Expressions, via the Column/Row Visibility dialog.
If for example I have 3 columns which I want to all have the same Expression to determine their visibility, is there any way for me to achieve this without opening the Column Visibility dialog for each Column and entering the appropriate Expression?
I've tried selecting multiple columns, but then the right-click context menu no longer offers the Column Visibility option (it's greyed out) and I have also tried out the Hidden property of the columns (which can be amended in bulk by selecting multiple columns), but this only stops the columns from being rendered, leaving a blank space where they used to be (rather than how Column Visibility works, where columns to the right of the hidden columns are moved across to fill the gap, like hiding columns in an Excel sheet).
Is it possible to achieve what I'm after, or will I have to continue opening the Column/Row Visibility dialog for each column/row I wish to conditionally hide/show?
If the columns you want to control the visibility for are next to each other, you can create a Column Group for them and manage the visibility via the Group.
Add a new column group at the appropriate level so that only the relevant columns will be included.
If you already have Column Groups this will likely be a Child Group or an Adjacent Group.
If not, you can create an initial Column Group by dragging a Dataset field from the Report Data into the Groups pane.
Insert new columns inside the new group, and move the data from your existing relevant columns into the group.
The new group does not need to repeat, so in it's properties window set Group on: to a plain text value, e.g. "1".
Input the desired visibility settings into the Visibility page of the properties window.
For each of the individual columns inside the group set the Hidden property to False, to remove any other expressions or settings that might interfere.
Not exactly what you are looking for but perhaps a midway point - and this can apply to many things other than visibility (e.g. background colour, tooltip) - edit the RDL directly using View Code. This has the added benefit of being able to implement changes that are almost identical per column instead of identical with a minimum of mouse usage.
Typically I have set one column up the way I like it in the designer and then copy/paste under the other columns. In the case of visibility look for <TablixColumnHierarchy><TablixMemebers>. You will see a list of empty <TablixMember /> items along with the expanded <TablixMember><Visibility><Hidden>=... block where you have set up one column. Simply copy paste that block over the empty items at the position of interest (you will need to count it out unfortunately as there are no identifiers).
Bonus Tip: If you make a mistake or want to change something later, you can do a replace on all expressions at once (optional regex allowed).
Remember to backup or check in your work first because the designer may not open that report again correctly if you make a mistake :-)
Select the columns you want to conditionally hide and press F4 to see the Properties Window. Look for the Visibility node and use the Hidden property to set the conditionally expression.
The expression should evaluate to True for hiding and False for showing.
Let me know if this helps.
Why is it that a control that appears in the property list in a BIDS project is not represented in the corresponding .rdl file?
Let me step back a bit; I'm having a heck of a time trying to figure out how to add items to an existing report, either via the XML (.rdl viewed as code) or on the design surface. I can click on a rectangle on the design surface and see a column row above it:
And if I click on the "pipe"-separated segements on that column heading row, I see "MatrixColumn4", "MatrixColumn3", "MatrixColumn2", and "MatrixColumn1" in the designer; for example, here's MatrixColumn3:
However, only one of these columns appears at a time in the Property list - if I select MatrixColumn3 on the design surface, MatrixColumn1, MatrixColumn2, and MatrixColumn4 are not there. The same holds true for selecting any of the others - it turns up temporarily in the Properties list but "hides" all the others:
Stranger yet, when I search the .rdl file (viewed as XML) for "MatrixColumn1" (or "2" or "3" or "4") they do not exist there. In fact, the only reference to "MatrixColumn" in the entire file is this:
<Matrix Name="matrix1">
<MatrixColumns>
<MatrixColumn>
<Width>1.67609in</Width>
</MatrixColumn>
</MatrixColumns>
. . .
This seems exceedingly bizarre - shouldn't there be four sets of <MatrixColumn></MatrixColumn> there?
I want to add another column heading, with a Textbox-as-label and a Textbox below that to display dynamic content, but how can I do it without adding another column heading?, or at least making room for this new column?
I can increase the width of the matrix ("matrix1") by dragging it or by increasing its Size.Width value, but its existing contents expand with it, giving me no room to add TextBoxes inside of it.
Maybe I'm approaching SSRS from a completely wrong mental angle, as I don't see much of a connection between what the report generates and what I see on the design surface and in the XML.
To add another column to a matrix right click the column header and Select Insert column. Then choose either inside group (left or right), or outside group (left or right).
A column created inside the group will repeat for every item in the column group
A column created outside the group will only appear the once to the left or right of the grouped columns.
Are you sure you are referring to a matrix (dynamic columns and rows) and not a tablix (dynamic number of rows only)?
The process for tablixes is the same as for matrixes as described above, just without the inside/outside group option.
Either method described above will include a new column with a single text box to label the column with, and another text box underneath to put the detail in.
You can also do this process by dragging a field from your dataset in the Report Data panel to the appropriate location in your existing table.
Please let me know if this helps, or if I've misunderstood your question and you require a different solution.
I come to you with a question on how I can create a simple flow chart like in the pictures below in SSRS. I have a query that returns rows with events, and a date column that I can use to organize these events in chronological order.
I have it all basically set up but I am running into a design problem. I have a tablix with two columns in a group for the box+arrow combination, with column visibility set up to hide the arrow if it reaches the last event. What I would like to happen is for the boxes to reach the end of the page (the rightmost side of the page, and then come down a short distance below that row of boxes and continue on the same page (Ex. B). What it's doing is reaching the end of the side of the page, and breaking to the next page, effectively creating a bunch of pages with only one row of boxes on each page. (Ex. A)
Ex. A: What it does:
Ex. B: What I want it to do (accidentally forgot to include the arrow on the middle rightmost box in the picture, the second and third rows are just continuations of the first obviously):
I would almost call it row wrapping but it's not exactly the same. To bring the problem away from my specific flow chart design, I want to make tablix columns wrap down directly below the table (not the content inside the columns, the actual columns themselves).
I've done some reading on column groupings and interactive page size. I don't really understand the column grouping manipulation, especially when trying to apply it to my situation, and the interactive page size doesn't seem to be what I am looking for either. Any help on this would be really appreciated!
I suggest you use a multi-column layout, e.g.
http://nederveld.wordpress.com/2010/02/15/how-to-do-a-column-layout-in-sql-reporting-services/
Each of your Box + Arrow pairs would go into each cell.
I'm a bit confused about your arrow requirement, you might need to use an expression based on RowNumber to hide the arrow in the last column.
Background info:
I was handed a "Tool", which was made using MS-Access 2007, and asked to add some things... The tool is basically a collection of options for querying a database. On a form titled CreatedReport there is a listbox that is bound to a table called analyzed which has all of resulting data from the query/queries that ran. The original creator of this tool set the column widths to specific values but with the new collection of possible results, those widths are very far off.
Desired Outcome:
The final result I want to achieve is, of course, to have the columns be the correct widths for the info that is in the columns. As long as that is achieved, I really don't care which route I have to take to get there.
Question:
How can I get the columns in a listbox in MS-Access 2007 to be sized appropriately for each use? Is there an auto-size feature I haven't stumbled across yet or do I need to hard code the set of column widths for each group? This wouldn't be too hard to do since there would only be about 4 or 5 different groups but I would prefer for the process to be automatic if at all possible.
Another approach would be to have the results returned in a sub form datasheet view, then the user can adjust the column widths also to set the widths automatically use code like this:
Example
This example takes effect in Datasheet view of the open Customers form. It sets the column to fit the size of the visible text.
Forms![Customers]![Address].ColumnWidth = -2
You could put this code into the Current Event of the sub form.
I don't think that Robert Harvey's answer is actually responsive to your question.
What you need to do is:
calculate the maximum length of the values in each column,
AND
figure out, based on the font in use, how wide the column should be.
Note that you may not actually want to set it to the maximum width if the value exceeds a certain threshold.
I don't know to do the second taks, but I suspect Stephen Lebans has already done the work on it. You might want to search his website for it.
Last time I checked, you still had to write code for this.
Your best bet is to use a resizer someone has already written. Here is a good one. It's old, but it shoul still work:
http://www.jamiessoftware.tk/resizeform/rf_jump.html
This is a quick solution that should help when you want to set up listview columns of different widths, and you know in advance the widths you want (eg, you know that column X will always be a 2-character State abbreviation, and column Y will always be a city name).
Just supply all the widths as a single semi colon-delimited string. Code each width as a number and a unit, such as 'in' or 'cm'. This worked well for me: Me.lsvPayHist.ColumnWidths = "1.0 in;0.8 in;1.0 in;1.0 in;2.0 in"