Zabbix Server behind HAProxy - zabbix

Hi my infrastructure of zabbix servers looks like this:
Two Zabbix Servers are behind HAProxy Servers in Active/Passive mode. Part of haproxy.cfg from one of the HAProxy server.
frontend ha-monit-app
bind :10051
mode tcp
default_backend monit-app
backend monit-app
server monit-app-01 10.164.0.10:10051 check
server monit-app-02 10.156.0.10:10051 check backup
There are two HAProxy servers with the same configuration and switched using failover ip 172.31.255.254
I've checked with nmap & ping is the failover ip available from other nodes, specially from zabbix web server (frontend) and here those results:
PING 172.31.255.254 (172.31.255.254) 56(84) bytes of data.
64 bytes from 172.31.255.254: icmp_seq=1 ttl=64 time=1.43 ms
64 bytes from 172.31.255.254: icmp_seq=2 ttl=64 time=0.284 ms
64 bytes from 172.31.255.254: icmp_seq=3 ttl=64 time=0.326 ms
64 bytes from 172.31.255.254: icmp_seq=4 ttl=64 time=0.306 ms
64 bytes from 172.31.255.254: icmp_seq=5 ttl=64 time=0.277 ms
--- 172.31.255.254 ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 4054ms
rtt min/avg/max/mdev = 0.277/0.525/1.433/0.454 ms
nmap -Pn -p 10051 172.31.255.254
Starting Nmap 7.40 ( https://nmap.org ) at 2018-06-15 00:59 CEST
Nmap scan report for 172.31.255.254
Host is up (0.0012s latency).
PORT STATE SERVICE
10051/tcp open zabbix-trapper
Nmap done: 1 IP address (1 host up) scanned in 0.29 seconds
telnet 172.31.255.254 10051
Trying 172.31.255.254...
Connected to 172.31.255.254.
Escape character is '^]'.
^CConnection closed by foreign host.
So everything looks good. That's why on frontend server in zabbix.conf.php I've set following values:
$ZBX_SERVER = '172.31.255.254';
$ZBX_SERVER_PORT = '10051';
$ZBX_SERVER_NAME = 'Zabbix GCP HAProxy';
But I see that this doesn't work on frontend at all
This a Zabbix Frontend / Status of Zabbix Server
I'm adding tcpdumps
=========== tcpdump ==============
Listening on Active HAProxy (10.164.0.3 / 172.31.255.254 Floating IP) for Active Zabbix Server (monit-app-01 - 10.156.0.10)
tcpdump -n host 10.156.0.10
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on eth0, link-type EN10MB (Ethernet), capture size 262144 bytes
10:11:44.301714 IP 10.164.0.3.60374 > 10.156.0.10.10051: Flags [S], seq 904325550, win 28400, options [mss 1420,sackOK,TS val 11110278 ecr 0,nop,wscale 7], length 0
10:11:44.308930 IP 10.156.0.10.10051 > 10.164.0.3.60374: Flags [S.], seq 1332485152, ack 904325551, win 28160, options [mss 1420,sackOK,TS val 12859862 ecr 11110278,nop,wscale 7], length 0
10:11:44.309007 IP 10.164.0.3.60374 > 10.156.0.10.10051: Flags [R.], seq 1, ack 1, win 222, options [nop,nop,TS val 11110280 ecr 12859862], length 0
10:11:46.309574 IP 10.164.0.3.60378 > 10.156.0.10.10051: Flags [S], seq 355584253, win 28400, options [mss 1420,sackOK,TS val 11110780 ecr 0,nop,wscale 7], length 0
10:11:46.316691 IP 10.156.0.10.10051 > 10.164.0.3.60378: Flags [S.], seq 3081623376, ack 355584254, win 28160, options [mss 1420,sackOK,TS val 12860364 ecr 11110780,nop,wscale 7], length 0
10:11:46.316769 IP 10.164.0.3.60378 > 10.156.0.10.10051: Flags [R.], seq 1, ack 1, win 222, options [nop,nop,TS val 11110782 ecr 12860364], length 0
Listening on Active HAProxy (10.164.0.3 / 172.31.255.254 Floating IP) for Zabbix Frontend (monit-front-01 - 10.164.0.7)
sudo tcpdump -n host 10.164.0.7
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on eth0, link-type EN10MB (Ethernet), capture size 262144 bytes
10:18:44.549679 IP 10.164.0.7.56084 > 172.31.255.254.10051: Flags [S], seq 3124977895, win 28400, options [mss 1420,sackOK,TS val 10621333 ecr 0,nop,wscale 7], length 0
10:18:44.549729 IP 172.31.255.254.10051 > 10.164.0.7.56084: Flags [S.], seq 1251960166, ack 3124977896, win 28160, options [mss 1420,sackOK,TS val 11215340 ecr 10621333,nop,wscale 7], length 0
10:18:44.550406 IP 10.164.0.7.56084 > 172.31.255.254.10051: Flags [.], ack 1, win 222, options [nop,nop,TS val 10621334 ecr 11215340], length 0
10:18:44.550576 IP 10.164.0.7.56084 > 172.31.255.254.10051: Flags [P.], seq 1:80, ack 1, win 222, options [nop,nop,TS val 10621334 ecr 11215340], length 79
10:18:44.550587 IP 172.31.255.254.10051 > 10.164.0.7.56084: Flags [.], ack 80, win 220, options [nop,nop,TS val 11215340 ecr 10621334], length 0
10:18:44.550620 IP 172.31.255.254.10051 > 10.164.0.7.56084: Flags [F.], seq 1:189, ack 80, win 220, options [nop,nop,TS val 11215340 ecr 10621334], length 188
10:18:44.550843 IP 10.164.0.7.56084 > 172.31.255.254.10051: Flags [F.], seq 80, ack 190, win 231, options [nop,nop,TS val 10621334 ecr 11215340], length 0
10:18:44.550849 IP 172.31.255.254.10051 > 10.164.0.7.56084: Flags [.], ack 81, win 220, options [nop,nop,TS val 11215340 ecr 10621334], length 0
10:18:47.820231 IP 10.164.0.7.56092 > 172.31.255.254.10051: Flags [S], seq 3701025043, win 28400, options [mss 1420,sackOK,TS val 10622151 ecr 0,nop,wscale 7], length 0
10:18:47.820304 IP 172.31.255.254.10051 > 10.164.0.7.56092: Flags [S.], seq 3543291301, ack 3701025044, win 28160, options [mss 1420,sackOK,TS val 11216157 ecr 10622151,nop,wscale 7], length 0
10:18:47.820562 IP 10.164.0.7.56092 > 172.31.255.254.10051: Flags [.], ack 1, win 222, options [nop,nop,TS val 10622151 ecr 11216157], length 0
10:18:47.820665 IP 10.164.0.7.56092 > 172.31.255.254.10051: Flags [P.], seq 1:80, ack 1, win 222, options [nop,nop,TS val 10622151 ecr 11216157], length 79
10:18:47.820672 IP 172.31.255.254.10051 > 10.164.0.7.56092: Flags [.], ack 80, win 220, options [nop,nop,TS val 11216158 ecr 10622151], length 0
10:18:47.820707 IP 172.31.255.254.10051 > 10.164.0.7.56092: Flags [F.], seq 1:189, ack 80, win 220, options [nop,nop,TS val 11216158 ecr 10622151], length 188
10:18:47.820947 IP 10.164.0.7.56092 > 172.31.255.254.10051: Flags [F.], seq 80, ack 190, win 231, options [nop,nop,TS val 10622151 ecr 11216158], length 0
10:18:47.820957 IP 172.31.255.254.10051 > 10.164.0.7.56092: Flags [.], ack 81, win 220, options [nop,nop,TS val 11216158 ecr 10622151], length 0
And I get NOSRV in haproxy.log
=============== HAProxy =============
Jun 15 10:34:49 ha-monit-app-01-6zxn haproxy[1471]: 10.164.0.7:58088 [15/Jun/2018:10:34:49.680] ha-monit-app monit-app/<NOSRV> -1/-1/0 188 PR 0/0/0/0/3 0/0
Jun 15 10:34:50 ha-monit-app-01-6zxn haproxy[1471]: 10.164.0.7:58096 [15/Jun/2018:10:34:50.646] ha-monit-app monit-app/<NOSRV> -1/-1/0 188 PR 0/0/0/0/3 0/0
Jun 15 10:35:00 ha-monit-app-01-6zxn haproxy[1471]: 10.164.0.7:58112 [15/Jun/2018:10:35:00.927] ha-monit-app monit-app/<NOSRV> -1/-1/0 188 PR 1/1/1/0/3 0/0
Jun 15 10:35:00 ha-monit-app-01-6zxn haproxy[1471]: 10.164.0.7:58110 [15/Jun/2018:10:35:00.927] ha-monit-app monit-app/<NOSRV> -1/-1/0 188 PR 0/0/0/0/3 0/0
Jun 15 10:35:11 ha-monit-app-01-6zxn haproxy[1471]: 10.164.0.7:58130 [15/Jun/2018:10:35:11.839] ha-monit-app monit-app/<NOSRV> -1/-1/0 188 PR 0/0/0/0/3 0/0
Jun 15 10:35:11 ha-monit-app-01-6zxn haproxy[1471]: 10.164.0.7:58132 [15/Jun/2018:10:35:11.853] ha-monit-app monit-app/<NOSRV> -1/-1/0 188 PR 0/0/0/0/3 0/0
Jun 15 10:35:22 ha-monit-app-01-6zxn haproxy[1471]: 10.164.0.7:58150 [15/Jun/2018:10:35:22.672] ha-monit-app monit-app/<NOSRV> -1/-1/0 188 PR 1/1/1/0/3 0/0
Jun 15 10:35:22 ha-monit-app-01-6zxn haproxy[1471]: 10.164.0.7:58148 [15/Jun/2018:10:35:22.672] ha-monit-app monit-app/<NOSRV> -1/-1/0 188 PR 0/0/0/0/3 0/0
Jun 15 10:35:32 ha-monit-app-01-6zxn haproxy[1471]: 10.164.0.7:58182 [15/Jun/2018:10:35:32.712] ha-monit-app monit-app/<NOSRV> -1/-1/0 188 PR 0/0/0/0/3 0/0
Jun 15 10:35:33 ha-monit-app-01-6zxn haproxy[1471]: 10.164.0.7:58196 [15/Jun/2018:10:35:33.793] ha-monit-app monit-app/<NOSRV> -1/-1/0 188 PR 0/0/0/0/3 0/0
Jun 15 10:35:43 ha-monit-app-01-6zxn haproxy[1471]: 10.164.0.7:58204 [15/Jun/2018:10:35:43.707] ha-monit-app monit-app/<NOSRV> -1/-1/0 188 PR 0/0/0/0/3 0/0
Jun 15 10:35:44 ha-monit-app-01-6zxn haproxy[1471]: 10.164.0.7:58212 [15/Jun/2018:10:35:44.742] ha-monit-app monit-app/<NOSRV> -1/-1/0 188 PR 0/0/0/0/3 0/0
status of HAProxy from stats


It's solved
Missing obvious parameter in the backend section
mode: tcp
defaults
log global
mode http
option httplog
option dontlognull
timeout connect 5000
timeout client 50000
timeout server 50000
errorfile 400 /etc/haproxy/errors/400.http
errorfile 403 /etc/haproxy/errors/403.http
errorfile 408 /etc/haproxy/errors/408.http
errorfile 500 /etc/haproxy/errors/500.http
errorfile 502 /etc/haproxy/errors/502.http
errorfile 503 /etc/haproxy/errors/503.http
errorfile 504 /etc/haproxy/errors/504.http
frontend ha-monit-app
bind :10051
mode tcp
default_backend monit-app
backend monit-app
mode tcp <-- this one
server monit-app-01 10.156.0.10:10051 check
server monit-app-02 10.164.0.10:10051 check backup
listen stats
bind :80
mode http
stats enable
stats uri /
stats hide-version
stats realm Zabbix\ Server\ HAProxy
stats auth xxxx:xxxx
It was using http on backends because it was a default parameter from
defaults
mode http

Related

qemu kvm vm can't access network with ovs dpdk

i'm using ovs with dpdk to improve network performance, but i can't resolve the problem by my self
DPDK dev bind script output
# dpdk-devbind.py -s
Network devices using DPDK-compatible driver
============================================
0000:07:00.0 'I350 Gigabit Network Connection 1521' drv=igb_uio unused=igb,vfio-pci,uio_pci_generic
0000:07:00.1 'I350 Gigabit Network Connection 1521' drv=igb_uio unused=igb,vfio-pci,uio_pci_generic
Network devices using kernel driver
===================================
0000:01:00.0 'Ethernet Controller 10-Gigabit X540-AT2 1528' if=eno1 drv=ixgbe unused=igb_uio,vfio-pci,uio_pci_generic *Active*
0000:01:00.1 'Ethernet Controller 10-Gigabit X540-AT2 1528' if=eno2 drv=ixgbe unused=igb_uio,vfio-pci,uio_pci_generic
No 'Baseband' devices detected
==============================
No 'Crypto' devices detected
============================
No 'Eventdev' devices detected
==============================
No 'Mempool' devices detected
=============================
No 'Compress' devices detected
==============================
No 'Misc (rawdev)' devices detected
===================================
ovs config
# ovs-vsctl --no-wait get Open_vSwitch . other_config
{dpdk-init="true", dpdk-lcore-mask="0x6", pmd-cpu-mask="0x24"}
cpu info
# lscpu
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
Address sizes: 46 bits physical, 48 bits virtual
CPU(s): 24
On-line CPU(s) list: 0-23
Thread(s) per core: 2
Core(s) per socket: 6
Socket(s): 2
NUMA node(s): 2
Vendor ID: GenuineIntel
CPU family: 6
Model: 62
Model name: Intel(R) Xeon(R) CPU E5-2630 v2 # 2.60GHz
Stepping: 4
CPU MHz: 2965.447
CPU max MHz: 3100.0000
CPU min MHz: 1200.0000
BogoMIPS: 5199.97
Virtualization: VT-x
L1d cache: 384 KiB
L1i cache: 384 KiB
L2 cache: 3 MiB
L3 cache: 30 MiB
NUMA node0 CPU(s): 0,2,4,6,8,10,12,14,16,18,20,22
NUMA node1 CPU(s): 1,3,5,7,9,11,13,15,17,19,21,23
Vulnerability Itlb multihit: KVM: Mitigation: Split huge pages
Vulnerability L1tf: Mitigation; PTE Inversion; VMX conditional cache flushes, SMT vulnerable
Vulnerability Mds: Mitigation; Clear CPU buffers; SMT vulnerable
Vulnerability Meltdown: Mitigation; PTI
Vulnerability Spec store bypass: Mitigation; Speculative Store Bypass disabled via prctl and seccomp
Vulnerability Spectre v1: Mitigation; usercopy/swapgs barriers and __user pointer sanitization
Vulnerability Spectre v2: Mitigation; Full generic retpoline, IBPB conditional, IBRS_FW, STIBP conditional, RSB filling
Vulnerability Srbds: Not affected
Vulnerability Tsx async abort: Not affected
Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx es
t tm2 ssse3 cx16 xtpr pdcm pcid dca sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm cpuid_fault pti ssbd ibrs ibpb stibp tpr_shadow vnmi flexpriority ept vpid fsgsbase smep erms xsaveopt dtherm ida arat pln pts md_clear flush_l1d
hugepage info
# grep Huge /proc/meminfo
AnonHugePages: 1214464 kB
ShmemHugePages: 0 kB
FileHugePages: 0 kB
HugePages_Total: 8192
HugePages_Free: 5846
HugePages_Rsvd: 1488
HugePages_Surp: 0
Hugepagesize: 2048 kB
Hugetlb: 16777216 kB
vm startup script
/usr/bin/qemu-system-x86_64 \
-enable-kvm \
-cpu host,kvm=off \
-smp 4 \
-m 8192M \
-object memory-backend-file,id=mem,size=1G,mem-path=/dev/hugepages,share=on \
-mem-prealloc \
-chardev socket,id=char-vm-2004-tpl,path=/var/run/openvswitch-vhost/vhost-vm-2004-tpl,server \
-netdev type=vhost-user,id=net-vm-2004-tpl,chardev=char-vm-2004-tpl,vhostforce \
-device virtio-net-pci,mac=52:54:14:cb:ab:6c,netdev=net-vm-2004-tpl \
-drive file=/opt/image/ubuntu-2004-tpl.img,if=virtio \
-vga qxl \
-spice port=15937,disable-ticketing \
-qmp tcp:0.0.0.0:25937,server,nowait \
-daemonize
ovs status
# ovs-vsctl show
2a4487e3-124a-4b66-92e1-1e824fd9a138
Bridge br0
datapath_type: netdev
Port vhost-vm-2004-tpl
Interface vhost-vm-2004-tpl
type: dpdkvhostuserclient
options: {vhost-server-path="/var/run/openvswitch-vhost/vhost-vm-2004-tpl"}
Port dpdk-p0
Interface dpdk-p0
type: dpdk
options: {dpdk-devargs="0000:07:00.0"}
Port br0
Interface br0
type: internal
ovs_version: "2.14.90"
ovs OpenFlow status
# ovs-ofctl show br0
OFPT_FEATURES_REPLY (xid=0x2): dpid:0000ecf4bbe2f494
n_tables:254, n_buffers:0
capabilities: FLOW_STATS TABLE_STATS PORT_STATS QUEUE_STATS ARP_MATCH_IP
actions: output enqueue set_vlan_vid set_vlan_pcp strip_vlan mod_dl_src mod_dl_dst mod_nw_src mod_nw_dst mod_nw_tos mod_tp_src mod_tp_dst
1(dpdk-p0): addr:ec:f4:bb:e2:f4:94
config: 0
state: 0
current: 1GB-FD AUTO_NEG
speed: 1000 Mbps now, 0 Mbps max
2(vhost-vm-2004-t): addr:00:00:00:00:00:00
config: 0
state: LINK_DOWN
speed: 0 Mbps now, 0 Mbps max
LOCAL(br0): addr:ec:f4:bb:e2:f4:94
config: 0
state: 0
current: 10MB-FD COPPER
speed: 10 Mbps now, 0 Mbps max
OFPT_GET_CONFIG_REPLY (xid=0x4): frags=normal miss_send_len=0
the vm can't get ip address by dhcp, and when i run command " ip link set ens3 up " on the vm,
it tell me "RTNETLINK answers: Operation not permitted"
the kernel version of host is
5.4.0-52-generic #57-Ubuntu SMP Thu Oct 15 10:57:00 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
the kernel version of vm is
5.4.0-47-generic #51-Ubuntu SMP Fri Sep 4 19:50:52 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
DPDK version:
DPDK 19.11.5
open vSwitch version:
2.14.90 (commit id:93023e80bd13ec1f09831eba484cf4621582d1a5 of https://github.com/openvswitch/ovs branch master)
ovs full log
2020-10-27T17:46:36.950Z|00001|vlog|INFO|opened log file /usr/local/var/log/openvswitch/ovs-vswitchd.log
2020-10-27T17:46:36.982Z|00002|ovs_numa|INFO|Discovered 12 CPU cores on NUMA node 1
2020-10-27T17:46:36.982Z|00003|ovs_numa|INFO|Discovered 12 CPU cores on NUMA node 0
2020-10-27T17:46:36.982Z|00004|ovs_numa|INFO|Discovered 2 NUMA nodes and 24 CPU cores
2020-10-27T17:46:36.983Z|00005|reconnect|INFO|unix:/usr/local/var/run/openvswitch/db.sock: connecting...
2020-10-27T17:46:36.983Z|00006|reconnect|INFO|unix:/usr/local/var/run/openvswitch/db.sock: connected
2020-10-27T17:46:36.985Z|00007|dpdk|INFO|Using DPDK 19.11.5
2020-10-27T17:46:36.985Z|00008|dpdk|INFO|DPDK Enabled - initializing...
2020-10-27T17:46:36.985Z|00009|dpdk|INFO|No vhost-sock-dir provided - defaulting to /usr/local/var/run/openvswitch
2020-10-27T17:46:36.985Z|00010|dpdk|INFO|IOMMU support for vhost-user-client disabled.
2020-10-27T17:46:36.985Z|00011|dpdk|INFO|POSTCOPY support for vhost-user-client disabled.
2020-10-27T17:46:36.985Z|00012|dpdk|INFO|Per port memory for DPDK devices disabled.
2020-10-27T17:46:36.985Z|00013|dpdk|INFO|EAL ARGS: ovs-vswitchd -c 0x6 --socket-mem 1024,1024 --socket-limit 1024,1024.
2020-10-27T17:46:36.988Z|00014|dpdk|INFO|EAL: Detected 24 lcore(s)
2020-10-27T17:46:36.988Z|00015|dpdk|INFO|EAL: Detected 2 NUMA nodes
2020-10-27T17:46:37.026Z|00016|dpdk|INFO|EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
2020-10-27T17:46:37.042Z|00017|dpdk|INFO|EAL: Selected IOVA mode 'PA'
2020-10-27T17:46:37.051Z|00018|dpdk|WARN|EAL: No free hugepages reported in hugepages-1048576kB
2020-10-27T17:46:37.051Z|00019|dpdk|WARN|EAL: No free hugepages reported in hugepages-1048576kB
2020-10-27T17:46:37.051Z|00020|dpdk|WARN|EAL: No available hugepages reported in hugepages-1048576kB
2020-10-27T17:46:37.051Z|00021|dpdk|INFO|EAL: Probing VFIO support...
2020-10-27T17:46:37.051Z|00022|dpdk|INFO|EAL: VFIO support initialized
2020-10-27T17:46:37.930Z|00023|dpdk|INFO|EAL: PCI device 0000:01:00.0 on NUMA socket 0
2020-10-27T17:46:37.930Z|00024|dpdk|INFO|EAL: probe driver: 8086:1528 net_ixgbe
2020-10-27T17:46:37.930Z|00025|dpdk|INFO|EAL: PCI device 0000:01:00.1 on NUMA socket 0
2020-10-27T17:46:37.930Z|00026|dpdk|INFO|EAL: probe driver: 8086:1528 net_ixgbe
2020-10-27T17:46:37.930Z|00027|dpdk|INFO|EAL: PCI device 0000:07:00.0 on NUMA socket 0
2020-10-27T17:46:37.930Z|00028|dpdk|INFO|EAL: probe driver: 8086:1521 net_e1000_igb
2020-10-27T17:46:37.995Z|00029|dpdk|INFO|EAL: PCI device 0000:07:00.1 on NUMA socket 0
2020-10-27T17:46:37.996Z|00030|dpdk|INFO|EAL: probe driver: 8086:1521 net_e1000_igb
2020-10-27T17:46:38.067Z|00031|dpdk|INFO|DPDK Enabled - initialized
2020-10-27T17:46:38.071Z|00032|pmd_perf|INFO|DPDK provided TSC frequency: 2600000 KHz
2020-10-27T17:46:38.083Z|00033|ofproto_dpif|INFO|netdev#ovs-netdev: Datapath supports recirculation
2020-10-27T17:46:38.083Z|00034|ofproto_dpif|INFO|netdev#ovs-netdev: VLAN header stack length probed as 1
2020-10-27T17:46:38.083Z|00035|ofproto_dpif|INFO|netdev#ovs-netdev: MPLS label stack length probed as 3
2020-10-27T17:46:38.083Z|00036|ofproto_dpif|INFO|netdev#ovs-netdev: Datapath supports truncate action
2020-10-27T17:46:38.083Z|00037|ofproto_dpif|INFO|netdev#ovs-netdev: Datapath supports unique flow ids
2020-10-27T17:46:38.083Z|00038|ofproto_dpif|INFO|netdev#ovs-netdev: Datapath supports clone action
2020-10-27T17:46:38.083Z|00039|ofproto_dpif|INFO|netdev#ovs-netdev: Max sample nesting level probed as 10
2020-10-27T17:46:38.083Z|00040|ofproto_dpif|INFO|netdev#ovs-netdev: Datapath supports eventmask in conntrack action
2020-10-27T17:46:38.083Z|00041|ofproto_dpif|INFO|netdev#ovs-netdev: Datapath supports ct_clear action
2020-10-27T17:46:38.083Z|00042|ofproto_dpif|INFO|netdev#ovs-netdev: Max dp_hash algorithm probed to be 1
2020-10-27T17:46:38.083Z|00043|ofproto_dpif|INFO|netdev#ovs-netdev: Datapath supports check_pkt_len action
2020-10-27T17:46:38.083Z|00044|ofproto_dpif|INFO|netdev#ovs-netdev: Datapath supports timeout policy in conntrack action
2020-10-27T17:46:38.083Z|00045|ofproto_dpif|INFO|netdev#ovs-netdev: Datapath supports ct_state
2020-10-27T17:46:38.083Z|00046|ofproto_dpif|INFO|netdev#ovs-netdev: Datapath supports ct_zone
2020-10-27T17:46:38.083Z|00047|ofproto_dpif|INFO|netdev#ovs-netdev: Datapath supports ct_mark
2020-10-27T17:46:38.083Z|00048|ofproto_dpif|INFO|netdev#ovs-netdev: Datapath supports ct_label
2020-10-27T17:46:38.083Z|00049|ofproto_dpif|INFO|netdev#ovs-netdev: Datapath supports ct_state_nat
2020-10-27T17:46:38.084Z|00050|ofproto_dpif|INFO|netdev#ovs-netdev: Datapath supports ct_orig_tuple
2020-10-27T17:46:38.084Z|00051|ofproto_dpif|INFO|netdev#ovs-netdev: Datapath supports ct_orig_tuple6
2020-10-27T17:46:38.084Z|00052|ofproto_dpif|INFO|netdev#ovs-netdev: Datapath supports IPv6 ND Extensions
2020-10-27T17:46:38.090Z|00053|bridge|INFO|bridge br0: added interface br0 on port 65534
2020-10-27T17:46:38.090Z|00054|netdev_dpdk|WARN|Failed to enable flow control on device 0
2020-10-27T17:46:38.099Z|00055|dpif_netdev|INFO|PMD thread on numa_id: 1, core id: 5 created.
2020-10-27T17:46:38.107Z|00056|dpif_netdev|INFO|PMD thread on numa_id: 0, core id: 2 created.
2020-10-27T17:46:38.107Z|00057|dpif_netdev|INFO|There are 1 pmd threads on numa node 1
2020-10-27T17:46:38.107Z|00058|dpif_netdev|INFO|There are 1 pmd threads on numa node 0
2020-10-27T17:46:38.107Z|00059|dpdk|INFO|Device with port_id=0 already stopped
2020-10-27T17:46:38.382Z|00060|netdev_dpdk|INFO|Port 0: ec:f4:bb:e2:f4:94
2020-10-27T17:46:38.382Z|00061|dpif_netdev|INFO|Core 2 on numa node 0 assigned port 'dpdk-p0' rx queue 0 (measured processing cycles 0).
2020-10-27T17:46:38.383Z|00062|bridge|INFO|bridge br0: added interface dpdk-p0 on port 1
2020-10-27T17:46:38.385Z|00063|dpdk|INFO|VHOST_CONFIG: Linear buffers requested without external buffers, disabling host segmentation offloading support
2020-10-27T17:46:38.390Z|00064|dpdk|INFO|VHOST_CONFIG: vhost-user client: socket created, fd: 1091
2020-10-27T17:46:38.390Z|00065|netdev_dpdk|INFO|vHost User device 'vhost-vm-2004-tpl' created in 'client' mode, using client socket '/var/run/openvswitch-vhost/vhost-vm-2004-tpl'
2020-10-27T17:46:38.394Z|00066|dpdk|WARN|VHOST_CONFIG: failed to connect to /var/run/openvswitch-vhost/vhost-vm-2004-tpl: No such file or directory
2020-10-27T17:46:38.394Z|00067|dpdk|INFO|VHOST_CONFIG: /var/run/openvswitch-vhost/vhost-vm-2004-tpl: reconnecting...
2020-10-27T17:46:38.538Z|00068|dpif_netdev|INFO|Core 2 on numa node 0 assigned port 'dpdk-p0' rx queue 0 (measured processing cycles 0).
2020-10-27T17:46:38.538Z|00069|dpif_netdev|INFO|Core 5 on numa node 1 assigned port 'vhost-vm-2004-tpl' rx queue 0 (measured processing cycles 0).
2020-10-27T17:46:38.538Z|00070|bridge|INFO|bridge br0: added interface vhost-vm-2004-tpl on port 2
2020-10-27T17:46:38.538Z|00071|bridge|INFO|bridge br0: using datapath ID 0000ecf4bbe2f494
2020-10-27T17:46:38.539Z|00072|connmgr|INFO|br0: added service controller "punix:/usr/local/var/run/openvswitch/br0.mgmt"
2020-10-27T17:46:38.539Z|00073|timeval|WARN|Unreasonably long 1554ms poll interval (361ms user, 789ms system)
2020-10-27T17:46:38.539Z|00074|timeval|WARN|faults: 36263 minor, 0 major
2020-10-27T17:46:38.539Z|00075|timeval|WARN|disk: 0 reads, 24 writes
2020-10-27T17:46:38.539Z|00076|timeval|WARN|context switches: 857 voluntary, 1425 involuntary
2020-10-27T17:46:38.539Z|00077|coverage|INFO|Event coverage, avg rate over last: 5 seconds, last minute, last hour, hash=072f9aca:
2020-10-27T17:46:38.539Z|00078|coverage|INFO|bridge_reconfigure 0.0/sec 0.000/sec 0.0000/sec total: 1
2020-10-27T17:46:38.540Z|00079|coverage|INFO|ofproto_flush 0.0/sec 0.000/sec 0.0000/sec total: 1
2020-10-27T17:46:38.540Z|00080|coverage|INFO|ofproto_update_port 0.0/sec 0.000/sec 0.0000/sec total: 3
2020-10-27T17:46:38.540Z|00081|coverage|INFO|rev_flow_table 0.0/sec 0.000/sec 0.0000/sec total: 1
2020-10-27T17:46:38.540Z|00082|coverage|INFO|cmap_expand 0.0/sec 0.000/sec 0.0000/sec total: 44
2020-10-27T17:46:38.540Z|00083|coverage|INFO|cmap_shrink 0.0/sec 0.000/sec 0.0000/sec total: 25
2020-10-27T17:46:38.540Z|00084|coverage|INFO|datapath_drop_upcall_error 0.0/sec 0.000/sec 0.0000/sec total: 2
2020-10-27T17:46:38.540Z|00085|coverage|INFO|dpif_port_add 0.0/sec 0.000/sec 0.0000/sec total: 3
2020-10-27T17:46:38.540Z|00086|coverage|INFO|dpif_flow_flush 0.0/sec 0.000/sec 0.0000/sec total: 1
2020-10-27T17:46:38.540Z|00087|coverage|INFO|dpif_flow_get 0.0/sec 0.000/sec 0.0000/sec total: 23
2020-10-27T17:46:38.540Z|00088|coverage|INFO|dpif_flow_put 0.0/sec 0.000/sec 0.0000/sec total: 24
2020-10-27T17:46:38.540Z|00089|coverage|INFO|dpif_flow_del 0.0/sec 0.000/sec 0.0000/sec total: 23
2020-10-27T17:46:38.540Z|00090|coverage|INFO|dpif_execute 0.0/sec 0.000/sec 0.0000/sec total: 6
2020-10-27T17:46:38.540Z|00091|coverage|INFO|flow_extract 0.0/sec 0.000/sec 0.0000/sec total: 4
2020-10-27T17:46:38.540Z|00092|coverage|INFO|miniflow_malloc 0.0/sec 0.000/sec 0.0000/sec total: 35
2020-10-27T17:46:38.540Z|00093|coverage|INFO|hmap_pathological 0.0/sec 0.000/sec 0.0000/sec total: 4
2020-10-27T17:46:38.540Z|00094|coverage|INFO|hmap_expand 0.0/sec 0.000/sec 0.0000/sec total: 492
2020-10-27T17:46:38.540Z|00095|coverage|INFO|hmap_shrink 0.0/sec 0.000/sec 0.0000/sec total: 2
2020-10-27T17:46:38.540Z|00096|coverage|INFO|netdev_received 0.0/sec 0.000/sec 0.0000/sec total: 1
2020-10-27T17:46:38.540Z|00097|coverage|INFO|netdev_get_stats 0.0/sec 0.000/sec 0.0000/sec total: 3
2020-10-27T17:46:38.540Z|00098|coverage|INFO|poll_create_node 0.0/sec 0.000/sec 0.0000/sec total: 30
2020-10-27T17:46:38.540Z|00099|coverage|INFO|poll_zero_timeout 0.0/sec 0.000/sec 0.0000/sec total: 1
2020-10-27T17:46:38.540Z|00100|coverage|INFO|seq_change 0.0/sec 0.000/sec 0.0000/sec total: 137
2020-10-27T17:46:38.540Z|00101|coverage|INFO|pstream_open 0.0/sec 0.000/sec 0.0000/sec total: 3
2020-10-27T17:46:38.540Z|00102|coverage|INFO|stream_open 0.0/sec 0.000/sec 0.0000/sec total: 1
2020-10-27T17:46:38.540Z|00103|coverage|INFO|util_xalloc 0.0/sec 0.000/sec 0.0000/sec total: 9631
2020-10-27T17:46:38.540Z|00104|coverage|INFO|netdev_set_policing 0.0/sec 0.000/sec 0.0000/sec total: 1
2020-10-27T17:46:38.540Z|00105|coverage|INFO|netdev_get_ethtool 0.0/sec 0.000/sec 0.0000/sec total: 2
2020-10-27T17:46:38.540Z|00106|coverage|INFO|netlink_received 0.0/sec 0.000/sec 0.0000/sec total: 87
2020-10-27T17:46:38.540Z|00107|coverage|INFO|netlink_recv_jumbo 0.0/sec 0.000/sec 0.0000/sec total: 19
2020-10-27T17:46:38.540Z|00108|coverage|INFO|netlink_sent 0.0/sec 0.000/sec 0.0000/sec total: 85
2020-10-27T17:46:38.540Z|00109|coverage|INFO|111 events never hit
2020-10-27T17:46:38.546Z|00110|netdev_dpdk|WARN|Failed to enable flow control on device 0
2020-10-27T17:46:38.547Z|00111|bridge|INFO|ovs-vswitchd (Open vSwitch) 2.14.90
2020-10-27T17:46:47.093Z|00112|memory|INFO|196052 kB peak resident set size after 10.1 seconds
2020-10-27T17:46:47.093Z|00113|memory|INFO|handlers:1 ports:3 revalidators:1 rules:5 udpif keys:2
2020-10-27T17:46:58.392Z|00001|dpdk|INFO|VHOST_CONFIG: /var/run/openvswitch-vhost/vhost-vm-2004-tpl: connected
2020-10-27T17:46:58.392Z|00002|dpdk|INFO|VHOST_CONFIG: new device, handle is 0
2020-10-27T17:46:58.396Z|00001|dpdk|INFO|VHOST_CONFIG: read message VHOST_USER_GET_FEATURES
2020-10-27T17:46:58.396Z|00002|dpdk|INFO|VHOST_CONFIG: read message VHOST_USER_GET_PROTOCOL_FEATURES
2020-10-27T17:46:58.396Z|00003|dpdk|INFO|VHOST_CONFIG: read message VHOST_USER_SET_PROTOCOL_FEATURES
2020-10-27T17:46:58.396Z|00004|dpdk|INFO|VHOST_CONFIG: negotiated Vhost-user protocol features: 0xcb7
2020-10-27T17:46:58.396Z|00005|dpdk|INFO|VHOST_CONFIG: read message VHOST_USER_GET_QUEUE_NUM
2020-10-27T17:46:58.396Z|00006|dpdk|INFO|VHOST_CONFIG: read message VHOST_USER_SET_SLAVE_REQ_FD
2020-10-27T17:46:58.396Z|00007|dpdk|INFO|VHOST_CONFIG: read message VHOST_USER_SET_OWNER
2020-10-27T17:46:58.396Z|00008|dpdk|INFO|VHOST_CONFIG: read message VHOST_USER_GET_FEATURES
2020-10-27T17:46:58.396Z|00009|dpdk|INFO|VHOST_CONFIG: read message VHOST_USER_SET_VRING_CALL
2020-10-27T17:46:58.396Z|00010|dpdk|INFO|VHOST_CONFIG: vring call idx:0 file:1100
2020-10-27T17:46:58.396Z|00011|dpdk|INFO|VHOST_CONFIG: read message VHOST_USER_SET_VRING_CALL
2020-10-27T17:46:58.396Z|00012|dpdk|INFO|VHOST_CONFIG: vring call idx:1 file:1101
2020-10-27T17:47:01.905Z|00013|dpdk|INFO|VHOST_CONFIG: read message VHOST_USER_SET_VRING_ENABLE
2020-10-27T17:47:01.905Z|00014|dpdk|INFO|VHOST_CONFIG: set queue enable: 1 to qp idx: 0
2020-10-27T17:47:01.905Z|00015|netdev_dpdk|INFO|State of queue 0 ( tx_qid 0 ) of vhost device '/var/run/openvswitch-vhost/vhost-vm-2004-tpl' changed to 'enabled'
2020-10-27T17:47:01.905Z|00016|dpdk|INFO|VHOST_CONFIG: read message VHOST_USER_SET_VRING_ENABLE
2020-10-27T17:47:01.905Z|00017|dpdk|INFO|VHOST_CONFIG: set queue enable: 1 to qp idx: 1
2020-10-27T17:47:01.905Z|00018|netdev_dpdk|INFO|State of queue 1 ( rx_qid 0 ) of vhost device '/var/run/openvswitch-vhost/vhost-vm-2004-tpl' changed to 'enabled'
2020-10-27T17:47:01.905Z|00019|dpdk|INFO|VHOST_CONFIG: read message VHOST_USER_SET_VRING_ENABLE
2020-10-27T17:47:01.905Z|00020|dpdk|INFO|VHOST_CONFIG: set queue enable: 1 to qp idx: 0
2020-10-27T17:47:01.905Z|00021|netdev_dpdk|INFO|State of queue 0 ( tx_qid 0 ) of vhost device '/var/run/openvswitch-vhost/vhost-vm-2004-tpl' changed to 'enabled'
2020-10-27T17:47:01.905Z|00022|dpdk|INFO|VHOST_CONFIG: read message VHOST_USER_SET_VRING_ENABLE
2020-10-27T17:47:01.905Z|00023|dpdk|INFO|VHOST_CONFIG: set queue enable: 1 to qp idx: 1
2020-10-27T17:47:01.905Z|00024|netdev_dpdk|INFO|State of queue 1 ( rx_qid 0 ) of vhost device '/var/run/openvswitch-vhost/vhost-vm-2004-tpl' changed to 'enabled'
2020-10-27T17:47:01.908Z|00025|dpdk|INFO|VHOST_CONFIG: read message VHOST_USER_SET_FEATURES
2020-10-27T17:47:01.908Z|00026|dpdk|INFO|VHOST_CONFIG: negotiated Virtio features: 0x17020a782
2020-10-27T17:47:50.172Z|00001|dpif_netdev(revalidator6)|ERR|internal error parsing flow key skb_priority(0),skb_mark(0),ct_state(0),ct_zone(0),ct_mark(0),ct_label(0),recirc_id(0),dp_hash(0),in_port(2),packet_type(ns=0,id=0),eth(src=54:b2:03:14:d0:39,dst=01:00:5e:00:00:01),eth_type(0x0800),ipv4(src=0.0.0.0,dst=224.0.0.1,proto=2,tos=0xc0,ttl=1,frag=no)
2020-10-27T17:47:50.172Z|00002|dpif(revalidator6)|WARN|netdev#ovs-netdev: failed to put[modify] (Invalid argument) ufid:94f25b77-62c5-4859-aec3-e9a41c72dc3d skb_priority(0/0),skb_mark(0/0),ct_state(0/0),ct_zone(0/0),ct_mark(0/0),ct_label(0/0),recirc_id(0),dp_hash(0/0),in_port(2),packet_type(ns=0,id=0),eth(src=54:b2:03:14:d0:39,dst=01:00:5e:00:00:01),eth_type(0x0800),ipv4(src=0.0.0.0/0.0.0.0,dst=224.0.0.1/0.0.0.0,proto=2/0,tos=0xc0/0,ttl=1/0,frag=no), actions:userspace(pid=0,slow_path(match))
2020-10-27T17:47:52.680Z|00003|dpif_netdev(revalidator6)|ERR|internal error parsing flow key skb_priority(0),skb_mark(0),ct_state(0),ct_zone(0),ct_mark(0),ct_label(0),recirc_id(0),dp_hash(0),in_port(2),packet_type(ns=0,id=0),eth(src=44:2c:05:ce:8d:03,dst=01:00:5e:7f:ff:fa),eth_type(0x0800),ipv4(src=192.168.27.150,dst=239.255.255.250,proto=2,tos=0xc0,ttl=1,frag=no)
2020-10-27T17:47:52.680Z|00004|dpif(revalidator6)|WARN|netdev#ovs-netdev: failed to put[modify] (Invalid argument) ufid:aff312f9-4416-49e4-a314-9f895aa96de1 skb_priority(0/0),skb_mark(0/0),ct_state(0/0),ct_zone(0/0),ct_mark(0/0),ct_label(0/0),recirc_id(0),dp_hash(0/0),in_port(2),packet_type(ns=0,id=0),eth(src=44:2c:05:ce:8d:03,dst=01:00:5e:7f:ff:fa),eth_type(0x0800),ipv4(src=192.168.27.150/0.0.0.0,dst=239.255.255.250/0.0.0.0,proto=2/0,tos=0xc0/0,ttl=1/0,frag=no), actions:userspace(pid=0,slow_path(match))
2020-10-27T17:47:55.009Z|00005|dpif_netdev(revalidator6)|ERR|internal error parsing flow key skb_priority(0),skb_mark(0),ct_state(0),ct_zone(0),ct_mark(0),ct_label(0),recirc_id(0),dp_hash(0),in_port(2),packet_type(ns=0,id=0),eth(src=00:02:c9:50:8a:f0,dst=01:00:5e:00:00:fb),eth_type(0x0800),ipv4(src=192.168.27.232,dst=224.0.0.251,proto=2,tos=0,ttl=1,frag=no)
2020-10-27T17:47:55.009Z|00006|dpif_netdev(revalidator6)|ERR|internal error parsing flow key skb_priority(0),skb_mark(0),ct_state(0),ct_zone(0),ct_mark(0),ct_label(0),recirc_id(0),dp_hash(0),in_port(2),packet_type(ns=0,id=0),eth(src=56:ed:b8:d2:f1:e3,dst=01:00:5e:00:00:6a),eth_type(0x0800),ipv4(src=192.168.27.101,dst=224.0.0.106,proto=2,tos=0xc0,ttl=1,frag=no)
2020-10-27T17:47:55.009Z|00007|dpif(revalidator6)|WARN|netdev#ovs-netdev: failed to put[modify] (Invalid argument) ufid:b108050d-511e-447d-8837-35af4af81c4e skb_priority(0/0),skb_mark(0/0),ct_state(0/0),ct_zone(0/0),ct_mark(0/0),ct_label(0/0),recirc_id(0),dp_hash(0/0),in_port(2),packet_type(ns=0,id=0),eth(src=00:02:c9:50:8a:f0,dst=01:00:5e:00:00:fb),eth_type(0x0800),ipv4(src=192.168.27.232/0.0.0.0,dst=224.0.0.251/0.0.0.0,proto=2/0,tos=0/0,ttl=1/0,frag=no), actions:userspace(pid=0,slow_path(match))
2020-10-27T17:47:55.009Z|00008|dpif(revalidator6)|WARN|netdev#ovs-netdev: failed to put[modify] (Invalid argument) ufid:02feab90-66a5-484c-bbc5-8e97985d1f73 skb_priority(0/0),skb_mark(0/0),ct_state(0/0),ct_zone(0/0),ct_mark(0/0),ct_label(0/0),recirc_id(0),dp_hash(0/0),in_port(2),packet_type(ns=0,id=0),eth(src=56:ed:b8:d2:f1:e3,dst=01:00:5e:00:00:6a),eth_type(0x0800),ipv4(src=192.168.27.101/0.0.0.0,dst=224.0.0.106/0.0.0.0,proto=2/0,tos=0xc0/0,ttl=1/0,frag=no), actions:userspace(pid=0,slow_path(match))
2020-10-27T17:47:56.014Z|00009|dpif_netdev(revalidator6)|ERR|internal error parsing flow key skb_priority(0),skb_mark(0),ct_state(0),ct_zone(0),ct_mark(0),ct_label(0),recirc_id(0),dp_hash(0),in_port(2),packet_type(ns=0,id=0),eth(src=00:02:c9:50:8a:f0,dst=01:00:5e:00:00:fc),eth_type(0x0800),ipv4(src=192.168.27.232,dst=224.0.0.252,proto=2,tos=0,ttl=1,frag=no)
2020-10-27T17:47:56.014Z|00010|dpif(revalidator6)|WARN|netdev#ovs-netdev: failed to put[modify] (Invalid argument) ufid:22a5115c-c730-42b2-a590-87b999192781 skb_priority(0/0),skb_mark(0/0),ct_state(0/0),ct_zone(0/0),ct_mark(0/0),ct_label(0/0),recirc_id(0),dp_hash(0/0),in_port(2),packet_type(ns=0,id=0),eth(src=00:02:c9:50:8a:f0,dst=01:00:5e:00:00:fc),eth_type(0x0800),ipv4(src=192.168.27.232/0.0.0.0,dst=224.0.0.252/0.0.0.0,proto=2/0,tos=0/0,ttl=1/0,frag=no), actions:userspace(pid=0,slow_path(match))

Using hping to inject packet into TCP netcat connection

I have a netcat connection open between a server and a client and i am trying to craft a packet using hping to print the text on the client.
My issue is I am able to craft a very similar packet to what is needed but I am missing the TCP options that are in the packets that are sent from server to the client via netcat.
here is my hping command
hping3 -A -y -M 717766814 -L 3830111434 -N 37033 -w 227 -b -p 55526 -s 5555 -P 192.168.0.116 -c 1 -d 8 -E task4.txt
here is the packet i craft
11:16:45.116157 00:a0:98:64:9f:40 > 00:a0:98:36:c8:07, ethertype IPv4 (0x0800), length 62: (tos 0x0, ttl 64, id 37033, offset 0, flags [DF], proto TCP (6), length 48)
192.168.0.216.5555 > 192.168.0.116.55526: Flags [P.], cksum 0x5600 (incorrect -> 0x0355), seq 717766814:717766822, ack 3830111434, win 227, length 8
0x0000: 4500 0030 90a9 4000 4006 2782 c0a8 00d8 E..0..#.#.'.....
0x0010: c0a8 0074 15b3 d8e6 2ac8 409e e44a dcca ...t....*.#..J..
0x0020: 5018 00e3 5600 0000 4243 4445 4647 410a P...V...BCDEFGA.
the actual packet i need to craft
11:16:52.352624 00:a0:98:64:9f:40 > 00:a0:98:36:c8:07, ethertype IPv4 (0x0800), length 74: (tos 0x0, ttl 64, id 38493, offset 0, flags [DF], proto TCP (6), length 60)
192.168.0.216.5555 > 192.168.0.116.55526: Flags [P.], cksum 0x82cb (incorrect -> 0x0ce8), seq 717766814:717766822, ack 3830111434, win 227, options [nop,nop,TS val 1099353487 ecr 208117467], length 8
0x0000: 4500 003c 965d 4000 4006 21c2 c0a8 00d8 E..<.]#.#.!.....
0x0010: c0a8 0074 15b3 d8e6 2ac8 409e e44a dcca ...t....*.#..J..
0x0020: 8018 00e3 82cb 0000 0101 080a 4186 cd8f ............A...
0x0030: 0c67 9edb 4142 4344 4546 470a .g..ABCDEFG.
the packets are identical other than missing the options and the checksum
How can i add the options to my crafted packet or is there a another method to getting test to appear on the client using hping?

As you saw, hping3 does not provide a way to set TCP options out-of-the-box.
However, good news is that the TCP options are right next to the TCP payload in the packet. So you can prepend your data with the TCP options:
Instead of just the data, put the TCP options + data in the file you provide to hping3:
echo "0101080a4186cd8f0c679edb414243444546470a" | python3 -c "import sys, binascii; sys.stdout.buffer.write(binascii.unhexlify(input().strip()))" > /tmp/task4.txt
Send using hping3, you will need to change the data size to 20 and set the data offset to 8 (default data offset is 5 32 bits words) to properly identify the added TCP options:
-O --tcpoff
Set fake tcp data offset. Normal data offset is tcphdrlen / 4.
hping3 -A -y -M 717766814 -L 3830111434 -N 37033 -w 227 -b -p 55526 -s 5555 -P 192.168.134.161 -c 1 -d 20 -O 8 -E task4.txt
Resulting crafted packet:
08:27:07.956095 IP (tos 0x0, ttl 64, id 37033, offset 0, flags [DF], proto TCP (6), length 60)
192.168.134.142.5555 > 192.168.134.161.55526: Flags [P.], cksum 0x5451 (incorrect -> 0x0104), seq 0:8, ack 1, win 227, options [nop,nop,TS val 1099353487 ecr 208117467], length 8
0x0000: 4500 003c 90a9 4000 4006 1b92 c0a8 868e E..<..#.#.......
0x0010: c0a8 86a1 15b3 d8e6 2ac8 409e e44a dcca ........*.#..J..
0x0020: 8018 00e3 5451 0000 0101 080a 4186 cd8f ....TQ......A...
0x0030: 0c67 9edb 4142 4344 4546 470a .g..ABCDEFG.

xdebug.remote_enable = 1 is not reflecting what I see in PhpStorm

Even after editing the appropriate ext-xdebug.ini (/usr/local/etc/php/7.1/conf.d/ext-xdebug.ini), PhpStorm still does not reflect what is seen withphpinfo().
PHP version: 7.1.16
PHP CLI: /usr/local/Cellar/php#7.1/7.1.16/bin/php PHP CGI: /usr/local/Cellar/php#7.1/7.1.16/bin/php-cgi
Loaded Configuration File: /usr/local/etc/php/7.1/php.ini
Additional .ini files parsed: /usr/local/etc/php/7.1/conf.d/ext-imagick.ini /usr/local/etc/php/7.1/conf.d/ext-opcache.ini /usr/local/etc/php/7.1/conf.d/ext-xdebug.ini
Debugger extension: Xdebug 2.6.0
Loaded extensions: bcmath, bz2, calendar, Core, ctype, curl, date, dba, dom, exif, fileinfo, filter, ftp, gd, gettext, gmp, hash, iconv, imagick, intl, json, ldap, libxml, mbstring, mcrypt, mysqli, mysqlnd, odbc, openssl, pcntl, pcre, PDO, pdo_dblib, pdo_mysql, PDO_ODBC, pdo_pgsql, pdo_sqlite, pgsql, Phar, phpdbg_webhelper, posix, pspell, readline, Reflection, session, shmop, SimpleXML, soap, sockets, SPL, sqlite3, standard, sysvmsg, sysvsem, sysvshm, tokenizer, wddx, xdebug, xml, xmlreader, xmlrpc, xmlwriter, xsl, Zend OPcache, zip, zlib
Configuration options:
allow_url_fopen
1
allow_url_include
arg_separator.input
&
arg_separator.output
&
assert.active
1
assert.bail
0
assert.callback
assert.exception
0
assert.quiet_eval
0
assert.warning
1
auto_append_file
auto_detect_line_endings
0
auto_globals_jit
1
auto_prepend_file
bcmath.scale
0
browscap
cli.pager
cli.prompt
\b \>
curl.cainfo
date.default_latitude
31.7667
date.default_longitude
35.2333
date.sunrise_zenith
90.583333
date.sunset_zenith
90.583333
date.timezone
dba.default_handler
flatfile
default_charset
UTF-8
default_mimetype
text/html
default_socket_timeout
60
disable_classes
disable_functions
display_errors
1
display_startup_errors
1
doc_root
docref_ext
docref_root
enable_dl
enable_post_data_reading
1
error_append_string
error_log
error_prepend_string
error_reporting
32767
exif.decode_jis_intel
JIS
exif.decode_jis_motorola
JIS
exif.decode_unicode_intel
UCS-2LE
exif.decode_unicode_motorola
UCS-2BE
exif.encode_jis
exif.encode_unicode
ISO-8859-15
expose_php
1
extension_dir
/usr/local/Cellar/php#7.1/7.1.16/lib/php/20160303
file_uploads
1
filter.default
unsafe_raw
filter.default_flags
from
gd.jpeg_ignore_warning
1
hard_timeout
2
highlight.comment
#FF8000
highlight.default
#0000BB
highlight.html
#000000
highlight.keyword
#007700
highlight.string
#DD0000
html_errors
0
iconv.input_encoding
iconv.internal_encoding
iconv.output_encoding
ignore_repeated_errors
ignore_repeated_source
ignore_user_abort
0
imagick.locale_fix
0
imagick.progress_monitor
0
imagick.skip_version_check
0
implicit_flush
1
include_path
.:/usr/local/Cellar/php#7.1/7.1.16/share/pear
input_encoding
internal_encoding
intl.default_locale
intl.error_level
0
intl.use_exceptions
0
ldap.max_links
-1
log_errors
1
log_errors_max_len
1024
mail.add_x_header
1
mail.force_extra_parameters
mail.log
max_execution_time
0
max_file_uploads
20
max_input_nesting_level
64
max_input_time
-1
max_input_vars
1000
mbstring.detect_order
mbstring.encoding_translation
0
mbstring.func_overload
0
mbstring.http_input
mbstring.http_output
mbstring.http_output_conv_mimetypes
^(text/|application/xhtml\+xml)
mbstring.internal_encoding
mbstring.language
neutral
mbstring.strict_detection
0
mbstring.substitute_character
mcrypt.algorithms_dir
mcrypt.modes_dir
memory_limit
512M
mysqli.allow_local_infile
1
mysqli.allow_persistent
1
mysqli.default_host
mysqli.default_port
3306
mysqli.default_pw
mysqli.default_socket
/tmp/mysql.sock
mysqli.default_user
mysqli.max_links
-1
mysqli.max_persistent
-1
mysqli.reconnect
mysqli.rollback_on_cached_plink
0
mysqlnd.collect_memory_statistics
1
mysqlnd.collect_statistics
1
mysqlnd.debug
mysqlnd.fetch_data_copy
0
mysqlnd.log_mask
0
mysqlnd.mempool_default_size
16000
mysqlnd.net_cmd_buffer_size
4096
mysqlnd.net_read_buffer_size
32768
mysqlnd.net_read_timeout
31536000
mysqlnd.sha256_server_public_key
mysqlnd.trace_alloc
odbc.allow_persistent
1
odbc.check_persistent
1
odbc.default_cursortype
3
odbc.default_db
odbc.default_pw
odbc.default_user
odbc.defaultbinmode
1
odbc.defaultlrl
4096
odbc.max_links
-1
odbc.max_persistent
-1
opcache.blacklist_filename
opcache.consistency_checks
0
opcache.dups_fix
0
opcache.enable
1
opcache.enable_cli
0
opcache.enable_file_override
0
opcache.error_log
opcache.fast_shutdown
0
opcache.file_cache
opcache.file_cache_consistency_checks
1
opcache.file_cache_only
0
opcache.file_update_protection
2
opcache.force_restart_timeout
180
opcache.huge_code_pages
0
opcache.inherited_hack
1
opcache.interned_strings_buffer
8
opcache.lockfile_path
/tmp
opcache.log_verbosity_level
1
opcache.max_accelerated_files
10000
opcache.max_file_size
0
opcache.max_wasted_percentage
5
opcache.memory_consumption
128
opcache.opt_debug_level
0
opcache.optimization_level
0x7FFFBFFF
opcache.preferred_memory_model
opcache.protect_memory
0
opcache.restrict_api
opcache.revalidate_freq
2
opcache.revalidate_path
0
opcache.save_comments
1
opcache.use_cwd
1
opcache.validate_permission
0
opcache.validate_root
0
opcache.validate_timestamps
1
open_basedir
openssl.cafile
openssl.capath
output_buffering
0
output_encoding
output_handler
pcre.backtrack_limit
1000000
pcre.jit
1
pcre.recursion_limit
100000
pdo_mysql.default_socket
/tmp/mysql.sock
pgsql.allow_persistent
1
pgsql.auto_reset_persistent
pgsql.ignore_notice
0
pgsql.log_notice
0
pgsql.max_links
-1
pgsql.max_persistent
-1
phar.cache_list
phar.readonly
1
phar.require_hash
1
phpdbg.auth
phpdbg.path
post_max_size
8M
precision
14
realpath_cache_size
4096K
realpath_cache_ttl
120
register_argc_argv
1
report_memleaks
1
report_zend_debug
0
request_order
GP
sendmail_from
sendmail_path
/usr/sbin/sendmail -t -i
serialize_precision
-1
session.auto_start
0
session.cache_expire
180
session.cache_limiter
nocache
session.cookie_domain
session.cookie_httponly
session.cookie_lifetime
0
session.cookie_path
/
session.cookie_secure
session.gc_divisor
1000
session.gc_maxlifetime
1440
session.gc_probability
1
session.lazy_write
1
session.name
PHPSESSID
session.referer_check
session.save_handler
files
session.save_path
session.serialize_handler
php
session.sid_bits_per_character
5
session.sid_length
26
session.trans_sid_hosts
session.trans_sid_tags
a=href,area=href,frame=src,form=
session.upload_progress.cleanup
1
session.upload_progress.enabled
1
session.upload_progress.freq
1%
session.upload_progress.min_freq
1
session.upload_progress.name
PHP_SESSION_UPLOAD_PROGRESS
session.upload_progress.prefix
upload_progress_
session.use_cookies
1
session.use_only_cookies
1
session.use_strict_mode
0
session.use_trans_sid
0
short_open_tag
SMTP
localhost
smtp_port
25
soap.wsdl_cache
1
soap.wsdl_cache_dir
/tmp
soap.wsdl_cache_enabled
1
soap.wsdl_cache_limit
5
soap.wsdl_cache_ttl
86400
sql.safe_mode
sqlite3.extension_dir
sys_temp_dir
track_errors
1
unserialize_callback_func
upload_max_filesize
2M
upload_tmp_dir
url_rewriter.hosts
url_rewriter.tags
form=
user_agent
user_dir
user_ini.cache_ttl
300
user_ini.filename
.user.ini
variables_order
GPCS
xdebug.auto_trace
0
xdebug.cli_color
0
xdebug.collect_assignments
0
xdebug.collect_includes
1
xdebug.collect_params
0
xdebug.collect_return
0
xdebug.collect_vars
0
xdebug.coverage_enable
1
xdebug.default_enable
1
xdebug.dump.COOKIE
xdebug.dump.ENV
xdebug.dump.FILES
xdebug.dump.GET
xdebug.dump.POST
xdebug.dump.REQUEST
xdebug.dump.SERVER
xdebug.dump.SESSION
xdebug.dump_globals
1
xdebug.dump_once
1
xdebug.dump_undefined
0
xdebug.extended_info
1
xdebug.file_link_format
xdebug.filename_format
xdebug.force_display_errors
0
xdebug.force_error_reporting
0
xdebug.gc_stats_enable
0
xdebug.gc_stats_output_dir
/var/tmp/
xdebug.gc_stats_output_name
gcstats.%p
xdebug.halt_level
0
xdebug.idekey
xdebug.max_nesting_level
256
xdebug.max_stack_frames
-1
xdebug.overload_var_dump
2
xdebug.profiler_aggregate
0
xdebug.profiler_append
0
xdebug.profiler_enable
0
xdebug.profiler_enable_trigger
0
xdebug.profiler_enable_trigger_value
xdebug.profiler_output_dir
/var/tmp/
xdebug.profiler_output_name
cachegrind.out.%p
xdebug.remote_addr_header
xdebug.remote_autostart
0
xdebug.remote_connect_back
0
xdebug.remote_cookie_expire_time
3600
xdebug.remote_enable
0
xdebug.remote_handler
dbgp
xdebug.remote_host
localhost
xdebug.remote_log
xdebug.remote_mode
req
xdebug.remote_port
9000
xdebug.remote_timeout
200
xdebug.scream
0
xdebug.show_error_trace
0
xdebug.show_exception_trace
0
xdebug.show_local_vars
0
xdebug.show_mem_delta
0
xdebug.trace_enable_trigger
0
xdebug.trace_enable_trigger_value
xdebug.trace_format
0
xdebug.trace_options
0
xdebug.trace_output_dir
/var/tmp/
xdebug.trace_output_name
trace.%c
xdebug.var_display_max_children
128
xdebug.var_display_max_data
512
xdebug.var_display_max_depth
3
xmlrpc_error_number
0
xmlrpc_errors
0
zend.assertions
1
zend.detect_unicode
1
zend.enable_gc
1
zend.multibyte
0
zend.script_encoding
zend.signal_check
0
zlib.output_compression
zlib.output_compression_level
-1
zlib.output_handler
Full xdebug phpinfo()
Second half of xdebug phpinfo
Log closed at 2018-04-05 15:47:08
Log opened at 2018-04-05 15:49:27
I: Connecting to configured address/port: localhost:9000.
W: Creating socket for 'localhost:9000', poll success, but error: Operation now in progress (19).
I: Connected to client. :-)
-> <init xmlns="urn:debugger_protocol_v1" xmlns:xdebug="http://xdebug.org/dbgp/xdebug" fileuri="file:///Users/namehere/PhpstormProjects/arc/web/index.php" language="PHP" xdebug:language_version="7.1.13" protocol_version="1.0" appid="17035" idekey="17743"><engine version="2.6.0"><![CDATA[Xdebug]]></engine><author><![CDATA[Derick Rethans]]></author><url><![CDATA[http://xdebug.org]]></url><copyright><![CDATA[Copyright (c) 2002-2018 by Derick Rethans]]></copyright></init>
-> <response xmlns="urn:debugger_protocol_v1" xmlns:xdebug="http://xdebug.org/dbgp/xdebug" status="stopping" reason="ok"></response>
Log closed at 2018-04-05 15:49:29
Log opened at 2018-04-05 15:49:31
I: Connecting to configured address/port: localhost:9000.
W: Creating socket for 'localhost:9000', poll success, but error: Operation now in progress (19).
I: Connected to client. :-)
-> <init xmlns="urn:debugger_protocol_v1" xmlns:xdebug="http://xdebug.org/dbgp/xdebug" fileuri="file:///Users/namehere/PhpstormProjects/arc/web/index.php" language="PHP" xdebug:language_version="7.1.13" protocol_version="1.0" appid="17035" idekey="17743"><engine version="2.6.0"><![CDATA[Xdebug]]></engine><author><![CDATA[Derick Rethans]]></author><url><![CDATA[http://xdebug.org]]></url><copyright><![CDATA[Copyright (c) 2002-2018 by Derick Rethans]]></copyright></init>
Log opened at 2018-04-05 15:49:31
I: Connecting to configured address/port: localhost:9000.
W: Creating socket for 'localhost:9000', poll success, but error: Operation now in progress (19).
I: Connected to client. :-)
-> <init xmlns="urn:debugger_protocol_v1" xmlns:xdebug="http://xdebug.org/dbgp/xdebug" fileuri="file:///Users/namehere/PhpstormProjects/arc/web/index.php" language="PHP" xdebug:language_version="7.1.13" protocol_version="1.0" appid="17036" idekey="17743"><engine version="2.6.0"><![CDATA[Xdebug]]></engine><author><![CDATA[Derick Rethans]]></author><url><![CDATA[http://xdebug.org]]></url><copyright><![CDATA[Copyright (c) 2002-2018 by Derick Rethans]]></copyright></init>
Log opened at 2018-04-05 15:49:32
I: Connecting to configured address/port: localhost:9000.
W: Creating socket for 'localhost:9000', poll success, but error: Operation now in progress (19).
I: Connected to client. :-)
-> <init xmlns="urn:debugger_protocol_v1" xmlns:xdebug="http://xdebug.org/dbgp/xdebug" fileuri="file:///Users/namehere/PhpstormProjects/arc/web/index.php" language="PHP" xdebug:language_version="7.1.13" protocol_version="1.0" appid="17040" idekey="17743"><engine version="2.6.0"><![CDATA[Xdebug]]></engine><author><![CDATA[Derick Rethans]]></author><url><![CDATA[http://xdebug.org]]></url><copyright><![CDATA[Copyright (c) 2002-2018 by Derick Rethans]]></copyright></init>
-> <response xmlns="urn:debugger_protocol_v1" xmlns:xdebug="http://xdebug.org/dbgp/xdebug" status="stopping" reason="ok"></response>
Log closed at 2018-04-05 15:49:33
Log opened at 2018-04-05 15:49:33
I: Connecting to configured address/port: localhost:9000.
W: Creating socket for 'localhost:9000', poll success, but error: Operation now in progress (19).
I: Connected to client. :-)
-> <init xmlns="urn:debugger_protocol_v1" xmlns:xdebug="http://xdebug.org/dbgp/xdebug" fileuri="file:///Users/namehere/PhpstormProjects/arc/web/index.php" language="PHP" xdebug:language_version="7.1.13" protocol_version="1.0" appid="17035" idekey="17743"><engine version="2.6.0"><![CDATA[Xdebug]]></engine><author><![CDATA[Derick Rethans]]></author><url><![CDATA[http://xdebug.org]]></url><copyright><![CDATA[Copyright (c) 2002-2018 by Derick Rethans]]></copyright></init>
-> <response xmlns="urn:debugger_protocol_v1" xmlns:xdebug="http://xdebug.org/dbgp/xdebug" status="stopping" reason="ok"></response>
Log closed at 2018-04-05 15:49:33
-> <response xmlns="urn:debugger_protocol_v1" xmlns:xdebug="http://xdebug.org/dbgp/xdebug" status="stopping" reason="ok"></response>
Log closed at 2018-04-05 15:49:33
-> <response xmlns="urn:debugger_protocol_v1" xmlns:xdebug="http://xdebug.org/dbgp/xdebug" status="stopping" reason="ok"></response>
Log closed at 2018-04-05 15:49:34
Log opened at 2018-04-05 15:49:34
Log opened at 2018-04-05 15:49:34
I: Connecting to configured address/port: localhost:9000.
W: Creating socket for 'localhost:9000', poll success, but error: Operation now in progress (19).
I: Connected to client. :-)
-> <init xmlns="urn:debugger_protocol_v1" xmlns:xdebug="http://xdebug.org/dbgp/xdebug" fileuri="file:///Users/namehere/PhpstormProjects/arc/web/index.php" language="PHP" xdebug:language_version="7.1.13" protocol_version="1.0" appid="17036" idekey="17743"><engine version="2.6.0"><![CDATA[Xdebug]]></engine><author><![CDATA[Derick Rethans]]></author><url><![CDATA[http://xdebug.org]]></url><copyright><![CDATA[Copyright (c) 2002-2018 by Derick Rethans]]></copyright></init>
I: Connecting to configured address/port: localhost:9000.
W: Creating socket for 'localhost:9000', poll success, but error: Operation now in progress (19).
I: Connected to client. :-)
-> <init xmlns="urn:debugger_protocol_v1" xmlns:xdebug="http://xdebug.org/dbgp/xdebug" fileuri="file:///Users/namehere/PhpstormProjects/arc/web/index.php" language="PHP" xdebug:language_version="7.1.13" protocol_version="1.0" appid="17035" idekey="17743"><engine version="2.6.0"><![CDATA[Xdebug]]></engine><author><![CDATA[Derick Rethans]]></author><url><![CDATA[http://xdebug.org]]></url><copyright><![CDATA[Copyright (c) 2002-2018 by Derick Rethans]]></copyright></init>
Log opened at 2018-04-05 15:49:34
I: Connecting to configured address/port: localhost:9000.
W: Creating socket for 'localhost:9000', poll success, but error: Operation now in progress (19).
I: Connected to client. :-)
-> <init xmlns="urn:debugger_protocol_v1" xmlns:xdebug="http://xdebug.org/dbgp/xdebug" fileuri="file:///Users/namehere/PhpstormProjects/arc/web/index.php" language="PHP" xdebug:language_version="7.1.13" protocol_version="1.0" appid="17040" idekey="17743"><engine version="2.6.0"><![CDATA[Xdebug]]></engine><author><![CDATA[Derick Rethans]]></author><url><![CDATA[http://xdebug.org]]></url><copyright><![CDATA[Copyright (c) 2002-2018 by Derick Rethans]]></copyright></init>
-> <response xmlns="urn:debugger_protocol_v1" xmlns:xdebug="http://xdebug.org/dbgp/xdebug" status="stopping" reason="ok"></response>
Log closed at 2018-04-05 15:49:34
-> <response xmlns="urn:debugger_protocol_v1" xmlns:xdebug="http://xdebug.org/dbgp/xdebug" status="stopping" reason="ok"></response>
Log closed at 2018-04-05 15:49:34
-> <response xmlns="urn:debugger_protocol_v1" xmlns:xdebug="http://xdebug.org/dbgp/xdebug" status="stopping" reason="ok"></response>
Log closed at 2018-04-05 15:49:34
Log opened at 2018-04-05 15:49:48
I: Connecting to configured address/port: 127.0.0.1:9000.
I: Connected to client. :-)
-> <init xmlns="urn:debugger_protocol_v1" xmlns:xdebug="http://xdebug.org/dbgp/xdebug" fileuri="file:///Users/namehere/PhpstormProjects/arc/bin/console" language="PHP" xdebug:language_version="7.1.13" protocol_version="1.0" appid="17042" idekey="16246"><engine version="2.6.0"><![CDATA[Xdebug]]></engine><author><![CDATA[Derick Rethans]]></author><url><![CDATA[http://xdebug.org]]></url><copyright><![CDATA[Copyright (c) 2002-2018 by Derick Rethans]]></copyright></init>
-> <response xmlns="urn:debugger_protocol_v1" xmlns:xdebug="http://xdebug.org/dbgp/xdebug" status="stopping" reason="ok"></response>
Log closed at 2018-04-05 15:49:49
Log opened at 2018-04-05 15:54:32
I: Connecting to configured address/port: localhost:9000.
W: Creating socket for 'localhost:9000', poll success, but error: Operation now in progress (19).
I: Connected to client. :-)
-> <init xmlns="urn:debugger_protocol_v1" xmlns:xdebug="http://xdebug.org/dbgp/xdebug" fileuri="file:///Users/namehere/PhpstormProjects/arc/web/index.php" language="PHP" xdebug:language_version="7.1.13" protocol_version="1.0" appid="17035" idekey="17743"><engine version="2.6.0"><![CDATA[Xdebug]]></engine><author><![CDATA[Derick Rethans]]></author><url><![CDATA[http://xdebug.org]]></url><copyright><![CDATA[Copyright (c) 2002-2018 by Derick Rethans]]></copyright></init>
-> <response xmlns="urn:debugger_protocol_v1" xmlns:xdebug="http://xdebug.org/dbgp/xdebug" status="stopping" reason="ok"></response>
Log closed at 2018-04-05 15:54:32

I had the same issue and spent about 2 hours without success.
I am putting the solution mentioned by #LazyOne from the comments here to the top(thanks!)
Stop the PHP-FPM or change port to different than 9000!
P.S. My PHPStorm shows xdebug.remote_enable=0 also but debugging started to work!

Siege will not stop when done with urls.txt file

I'm using siege to locate some problem pages on our new sitemap and am having trouble getting it to stop after it runs through the urls.txt file. I have tried using reps=once in the command line, as well as in the .siegerc config file. I find that I have to use the config file, as I want the output written verbosely to a log file so that I can see page load times, 302 and 404 errors, etc. and import them into excel. However, no matter what I try I cannot get siege to stop when it completes the url.txt file- it just reruns it over again.
I have configured for 40 concurrent users, the time and reps variable is commented out in config, the url.txt file is in config. The syntax I run at cmd line is...
sudo siege --reps=once -v > outputfile.csv
I have tried setting the reps in config, no luck. Any ideas where I'm going wrong?

I ran into similar problems and trying multiple options I got it to work with:
# siege -c 10 -b -r 10 -f urls.txt
where urls.txt is a simple list of URLs like
http://ip-address/url1.html
http://ip-address/url2.html
....
....
The logs were written into a file specified in the siegerc file. ${HOME}/var/siege.log
2016-08-05 17:52:59, 100, 0.88, 4, 0.09, 113.64, 4.55, 9.67, 100, 0
2016-08-05 17:53:00, 100, 0.91, 4, 0.09, 109.89, 4.40, 9.76, 100, 0
2016-08-05 17:53:01, 100, 0.90, 4, 0.09, 111.11, 4.44, 9.78, 100, 0
2016-08-05 17:53:02, 100, 0.89, 4, 0.09, 112.36, 4.49, 9.64, 100, 0
2016-08-05 17:53:03, 100, 0.86, 4, 0.08, 116.28, 4.65, 9.84, 100, 0
2016-08-05 17:53:04, 100, 0.89, 4, 0.09, 112.36, 4.49, 9.80, 100, 0
2016-08-05 17:53:05, 100, 0.88, 4, 0.09, 113.64, 4.55, 9.83, 100, 0
2016-08-05 17:53:06, 100, 0.88, 4, 0.09, 113.64, 4.55, 9.89, 100, 0
2016-08-05 17:53:07, 100, 0.87, 4, 0.09, 114.94, 4.60, 9.79, 100, 0
2016-08-05 17:53:07, 100, 0.88, 4, 0.09, 113.64, 4.55, 9.85, 100, 0
}
I also observed that the logfile option is either buggy or very strict.
'-l filename.log' does not work.
$ siege -c 10 -b -r 10 -f urls.txt -l ./siege.log
** SIEGE 2.70
** Preparing 10 concurrent users for battle.
The server is now under siege...
done.
Transactions: 0 hits
Availability: 0.00 %
Elapsed time: 0.08 secs
Data transferred: 0.00 MB
Response time: 0.00 secs
Transaction rate: 0.00 trans/sec
Throughput: 0.00 MB/sec
Concurrency: 0.00
Successful transactions: 0
Failed transactions: 100
Longest transaction: 0.00
Shortest transaction: 0.00
FILE: /home/xxxx/var/siege.log
You can disable this annoying message by editing
the .siegerc file in your home directory; change
the directive 'show-logfile' to false.
But --log=filename.log works. e.g.
# siege -c 10 -b -r 10 -f urls.txt --log=./siege.log
$ siege -c 10 -b -r 10 -f urls.txt --log=./siege.log
** SIEGE 2.70
** Preparing 10 concurrent users for battle.
The server is now under siege...
HTTP/1.1 200 0.08 secs: 45807 bytes ==> /8af6cacb-50ed-40b6-995f-49480f9f74fa.html
HTTP/1.1 200 0.08 secs: 45807 bytes ==> /8af6cacb-50ed-40b6-995f-49480f9f74fa.html
HTTP/1.1 200 0.09 secs: 45807 bytes ==> /8af6cacb-50ed-40b6-995f-49480f9f74fa.html
HTTP/1.1 200 0.09 secs: 45807 bytes ==> /8af6cacb-50ed-40b6-995f-49480f9f74fa.html
HTTP/1.1 200 0.10 secs: 45807 bytes ==> /8af6cacb-50ed-40b6-995f-49480f9f74fa.html
HTTP/1.1 200 0.10 secs: 45807 bytes ==> /8af6cacb-50ed-40b6-995f-49480f9f74fa.html
HTTP/1.1 200 0.10 secs: 45807 bytes ==> /8af6cacb-50ed-40b6-995f-49480f9f74fa.html
HTTP/1.1 200 0.10 secs: 45807 bytes ==> /8af6cacb-50ed-40b6-995f-49480f9f74fa.html
HTTP/1.1 200 0.10 secs: 45807 bytes ==> /8af6cacb-50ed-40b6-995f-49480f9f74fa.html
HTTP/1.1 200 0.10 secs: 45807 bytes ==> /8af6cacb-50ed-40b6-995f-49480f9f74fa.html
HTTP/1.1 200 0.10 secs: 55917 bytes ==> /create_and_delete_networks.html
HTTP/1.1 200 0.10 secs: 55917 bytes ==> /create_and_delete_networks.html
HTTP/1.1 200 0.10 secs: 55917 bytes ==> /create_and_delete_networks.html
HTTP/1.1 200 0.10 secs: 55917 bytes ==> /create_and_delete_networks.html
HTTP/1.1 200 0.09 secs: 55917 bytes ==> /create_and_delete_networks.html
done.
Transactions: 100 hits
Availability: 100.00 %
Elapsed time: 0.89 secs
Data transferred: 4.60 MB
Response time: 0.09 secs
Transaction rate: 112.36 trans/sec
Throughput: 5.16 MB/sec
Concurrency: 9.74
Successful transactions: 100
Failed transactions: 0
Longest transaction: 0.15
Shortest transaction: 0.05
FILE: ./siege.log
You can disable this annoying message by editing
the .siegerc file in your home directory; change
Hope this helps.

How to obtain human-readable mercurial push-command traffic example

I am doing push using mercurial hg to bitbucket.org using https.
There is a bunch of changes to text files and also binary files added. So I would like to capture the real traffic of this command in http format to analyze. How can I make it? Or at least inspecting an example of captured human-readable push would be great.
There is a link for mercurial wire protocol, but no example how it might really look.

There are a couple of proxies (http://mitmproxy.org/ is popular, I really like http://www.charlesproxy.com/) which can MITM the HTTPS connection… However, it might be simpler to start a local Mercurial server, then sniff that connection:
$ cd some-hg-repo/
$ hg serve
… listening at http://127.0.0.1:8000/ …
Then fire up your packet sniffer watching on the loopback interface, and from another shell:
% hg clone http://127.0.0.1:8000/ repo-clone
% cd repo-clone
% fortune > foo.c
% hg commit -m "change to foo"
% hg push
And here's a bit of what it looks like:
$ sudo tcpdump -i lo0 -A 'tcp port 8000 and (((ip[2:2] - ((ip[0]&0xf)<<2)) - ((tcp[12]&0xf0)>>2)) != 0)'
03:15:05.515867 IP localhost.52031 > localhost.irdmi: Flags [P.], seq 2116430132:2116430284, ack 835526317, win 40830, options [nop,nop,TS val 269453377 ecr 269453377], length 152
E....2#.#............?.#~&)41......~.......
...A...AGET /?cmd=capabilities HTTP/1.1
Accept-Encoding: identity
host: localhost:8000
accept: application/mercurial-0.1
user-agent: mercurial/proto-1.0
… snip …
03:15:05.516780 IP localhost.irdmi > localhost.52031: Flags [P.], seq 173:303, ack 152, win 40830, options [nop,nop,TS val 269453378 ecr 269453378], length 130
E...8b#.#............#.?1..Y~&)....~.......
...B...Blookup changegroupsubset branchmap pushkey known getbundle unbundlehash batch stream unbundle=HG10GZ,HG10BZ,HG10UN httpheader=1024
GET /?cmd=batch HTTP/1.1
Accept-Encoding: identity
x-hgarg-1: cmds=heads+%3Bknown+nodes%3D
host: localhost:8000
vary: X-HgArg-1
accept: application/mercurial-0.1
user-agent: mercurial/proto-1.0
…snip…
03:15:05.528852 IP localhost.irdmi > localhost.52033: Flags [P.], seq 474:516, ack 355, win 40830, options [nop,nop,TS val 269453389 ecr 269453389], length 42
E..^.h#.#............#.A.W...,.....~.R.....
...M...M92550c48fd2dc2c112ac88215eff29a5012abff1
;
03:15:05.529756 IP localhost.52033 > localhost.irdmi: Flags [P.], seq 355:628, ack 516, win 40830, options [nop,nop,TS val 269453390 ecr 269453389], length 273
E..E.N#.#............A.#.,...W.....~.9.....
...N...MGET /?cmd=getbundle HTTP/1.1
Accept-Encoding: identity
x-hgarg-1: common=0000000000000000000000000000000000000000&heads=92550c48fd2dc2c112ac88215eff29a5012abff1
host: localhost:8000
vary: X-HgArg-1
accept: application/mercurial-0.1
user-agent: mercurial/proto-1.0
…snip…
03:15:05.535163 IP localhost.irdmi > localhost.52033: Flags [P.], seq 688:6194, ack 628, win 40830, options [nop,nop,TS val 269453395 ecr 269453394], length 5506
E...AZ#.#............#.A.W...,.....~.......
........]..>O..3.x....L .-.....I.mh....M}.i!..Bh8.PL. .O
1iB ...C.....4.4....:...H..w....7.\..#.{.p.......-g.....^u....5...H...MWu.#....c.C4Y^19QP....l.....1.d.ukh.5..M.....k.A..<'.2..,.2.......{.q.(?.....rc"._.........m.xx.';...]V_0..e..j..{....OWf.n........J.bZ&kVXAR4...!....*..J.b..x.....#.Y..P........e.i;#....c.F..._.m.a|. .........=.
… snip …