I'm getting an error while trying to connect raspberry running ubuntu mate to my Google Cloud SQL instance.
These are the step I did to install:
git clone https://github.com/GoogleCloudPlatform/cloudsql-proxy
cd cloudsql-proxy/
sudo sh download_proxy.sh
My instance is configured this way (I deleted some characters in the image and in the code):
I didn't set the network because I'll be using proxy
Then I download into the same folder my JSON key.
wget https://drive.google.com/file/d/my_key.json
And the start the proxy
sudo ./cloud_sql_proxy -instances=be - 21:us-central1:be =tcp:3306 \
-credential_file=./my_key.json &
But I'm getting the error:
pi#pi:~/cloudsql-proxy$ ./cloud_sql_proxy: 1: ./cloud_sql_proxy:
Syntax error: ")" unexpected
I've tried removing the .json and I was getting the same error before without credential, I think that the problem is in the setup.
My dir ls is:
Any help is appreciated :)
download_proxy.sh downloads the proxy compiled for the amd64 architecture of CPU (aka x86_64). Your raspberry Pi has a ARM CPU, so this binary cannot run on your machine.
Google does not provide pre-build ARM versions of the proxy. I don't even know if it is able to build on ARM CPU. If it is possible, this is how you must do it:
Install go, e.g. with apt-get install golang
Setup a GOPATH, as per https://github.com/golang/go/wiki/GOPATH
Run go get github.com/GoogleCloudPlatform/cloudsql-proxy/cmd/cloud_sql_proxy
Run the proxy with $GOPATH/cloud_sql_proxy -instances=...
Ok.
I'm sharing what I did to make it work, as David I don't know what version was I downloading.
I tried to avoid installing Go but it was the only way to get it installed.
sudo apt-get install golang-go
export GOPATH=$HOME/go
go get github.com/GoogleCloudPlatform/cloudsql-proxy/cmd/cloud_sql_proxy
cd $GOPATH/bin
wget your_key.json
sudo ./cloud_sql_proxy -instances=the_full_name_of_the_instance=tcp:3306 -credential_file=./your_key.json &
But I was getting a error because I already have mysql running localy in the same port
So now I'm using a unix soquet
sudo ./cloud_sql_proxy -instances=the_full_name_of_the_instance -credential_file=./your_key.json &
And then it's ready for connections :)
Thanks guys
I found issues with this when compiling SQL-proxy. I did, however, find the instructions here worked great on my raspberry pi 3. Have to make sure to remove all prior installations then reinstall it
wget https://storage.googleapis.com/golang/go1.9.linux-armv6l.tar.gz
sudo tar -C /usr/local -xzf go1.9.linux-armv6l.tar.gz
export PATH=$PATH:/usr/local/go/bin # put into ~/.profile`
Related
I am using CakePHP 3 and MAMP Pro server for my project. When I am trying to bake the cake, this error shows up:
Fatal error: You must enable the intl extension to use CakePHP.
I have even included intl.so and extension=php_intl.dll in my php.ini file but couldn't figure out solution for this error.
this issue was happening to me some days ago. I had installed Ubuntu 18.04 and php 7.1.
I was trying to run the comman php cake.php bake in orden to use cakephp's console but I was getting the following error message:
You must enable the intl extension to use CakePHP.
This extension (intl) was installed for php 7.1 (php7.1-intl) but this message was appearing every time I used php cake.php bake
After some google searches, I saw that I have to install the extension but with the following command:
sudo apt-get install php-intl
The same issue happened with mbstring extension, I used the command:
sudo apt-get install php-mbstring
then I restarted the apache server with:
sudo service apache2 restart
It's difficult to pinpoint exactly what's wrong without seeing your system setup. However based on what was said in the question, you may be setting up the intl extension incorrectly.
First off, if your OS is Linux/macOS and the PHP extension is a shared library (i.e. has a .so extension) then the php.ini entry should be extension=intl.so not extension=php_intl.dll. Also make sure the intl.so file is in the directory configured under the ini entry extension_dir. Otherwise make sure the extension ini entry is fully qualified (e.g. extension=/path/to/extension/dir/intl.so).
If you are using a Linux OS that has a package manager such as Debian/Ubuntu, you may be able to more easily install the extension for the PHP packaged for that distro. For example, in Ubuntu/Debian the package php5-intl provides the intl extension for PHP5 (I assume it's something similar for PHP7 if you've enabled those repos).
If you build PHP from source, you can try bundling the extension into your PHP. See the instructions from the manual.
I faced the same issue.
I added extension="php_intl.dll" in php.ini and restarted the Apache server.
Now it is working.
I had the same issue. After starting from scratch, I did :
$ brew install php
$ composer install && composer update && composer dump-autoload --optimize
$ composer self-update && composer create-project --prefer-dist cakephp/app:^3.8 cms
$ cd cms
$ bin/cake server
And it was working !
I installed scilab.6.0.0 and backdoor fromscilab website (which I could not find it from Application>Module maneger>atom>Technical). I moved the backdoor file my home and from scilab command line I installed it
-->atomsInstall('/home/user/BackDoor_0.2_5.5.bin.x86_64.linux.tar.gz')
Even though, it installed backdoor successfully, when I restart the scilab I got this error message with backdoor
Start Toolbox BackDoor
Load macros
atomsLoad: An error occurred while loading 'BackDoor-0.2':
lib: Old binary lib detected. Please recompile it for Scilab 6.
As I understand I need to update the library, but I don't know how?
Would sb tell me explicitly (because I am a newbie user of scilab) how can I get over the error?
at the and I try to connect octave and scilab and when I try to run a demo script at octave I get also this error
>> sci_sim_example
Scilab connection failed
FYI: I already installed sci_cosim package (after I downloaded the package, I write to octave prompt >>pkg install sci_cosim_0.1.3.tar.gz), and I load it before running the script.
How can I recompile the lib: Old binary lib detected
Thank you so much for your help in advance
Here's what worked for me.
Download Scilab 5.5.2 (link for Linux 64bit version)
Extract the .tar.gz file in your preferred system location to install it there. Generally, my preferred location to extract / install self-contained packages is inside /opt .
You can extract the .tar.gz file using your filebrowser's graphical facilities, or on the command line; if /opt is owned by root (which it usually is) you may need to change ownership after extraction. E.g. your installation might look something like this:
cd /opt
sudo wget http://www.scilab.org/download/5.5.2/scilab-5.5.2.bin.linux-x86_64.tar.gz
sudo tar -xvzf ./scilab-5.5.2.bin.linux-x86_64.tar.gz
sudo rm scilab-5.5.2.bin.linux-x86_64.tar.gz
sudo chown $USER ./scilab-5.5.2 -R
Launch scilab by typing
/opt/scilab-5.5.2/bin/scilab &
in your terminal.
Once scilab is launched, go to Applications->Module Manager ATOMS. In the new window that comes up, click on All modules -> BackDoor -> Install.
You should get a message saying "Installation done, please restart SciLab".
Exit Scilab, and launch it again from the terminal. If you see a message:
atomsLoad: An error occurred while loading 'BackDoor-0.2':
File "/opt/scilab-5.5.2/share/scilab/contrib/BackDoor/0.2/etc/backdoor.start" does not exist.
then type the following commands in your terminal to rename the affected files:
cd /opt/scilab-5.5.2/share/scilab/contrib/BackDoor/0.2/etc/
mv BackDoor.start backdoor.start
mv BackDoor.quit backdoor.quit
Restart SciLab again. Hopefully this time it will work and SciLab will inform you that BackDoor is listening for connections at a certain port.
PS. Also note that from the octave side of things, the -auto option is no longer accepted when you perform a pkg install. You will need to load the sockets and sci_cosim packages manually each time you want to use this.
I am trying to configure ejabberd with mysql database. After changes into the yml file i got this error while starting node.
2017-01-09 13:07:27.386 [critical] <0.38.0>#ejabberd:exit_or_halt:133 failed to start application 'p1_mysql': {error,
{"no such file or directory",
"p1_mysql.app"}}
Searching for solutions encountered with a step to hit './configure'
But i cannot locate the directory.
Tried it in /var/lib/ejabberd as well. says "not found"
Installed on Ubuntu using apt-get install ejabberd
How do i hit configure to do the needful.
If you're building from source, you should enable mysql support via configure script, e.g.
$ ./autogen.sh # Only needed if building directly from github repo
$ ./configure --enable-mysql
$ make
I am currently using the Macbook pro with OS 10.9.
And I was trying to install octave to my mac when I found that I have to install gnuplot before I could use the plot in the octave. So I try to install gnuplot using the homebrew. However,the brew got stuck when trying to install the gd, because China's network fails to link to the site https://bitbucket.org/libgd/gd-libgd/downloads/libgd-2.1.0.tar.gz
So I use goagent to download the package via chrome and try to manually install the package and try to link it using brew by the instruction from https://github.com/mxcl/homebrew/wiki/FAQ
And after make install, when I try to use:
brew link libgd
the brew prompt error message:
Error: No such keg: /usr/local/Cellar/libgd
And I followed exactly the process in the FAQ diy.
$ tar -xvf l-ibgd-2.1.0.tar.gz
[snip]
$ cd libgd-2.1.0
$ brew diy
-DCMAKE_INSTALL_PREFIX=/usr/local/Cellar/libgd/2.1.0
$ ./configure --prefix=/usr/local/Cellar/libgd/2.1.0
[snip]
$ make && make install
[snip]
$ brew link libgd
Error: No such keg: /usr/local/Cellar/libgd
The configuration and installation are without any error. Any suggestions? Thx a lot!
There are several things wrong here, and I'm not sure whether they are Homebrew bugs or incomplete transcription on your part.
First, the package is called gd, not libgd, so there would be /usr/local/Cellar/gd, not /usr/local/Cellar/libgd.
Second, brew diy appears to suggest a cmake invocation, but gd uses autotools, so that is wrong.
Ultimately, this should work if you string it all together correctly, but actually, if you have problems with reaching a mirror over http, I would just put the tarball somewhere else and edit the formula file (brew edit gd) to point to that new location. Much easier, and you can even save your modification in a local Git branch.
I've recently installed MacPorts as explained on MacPorts website. All the process went well. The .profile file in my home directory has been updated (in this file the paths "/opt/local/bin" and "/opt/local/sbin" are added to the environment variable PATH) and all the macports files are in the directory "/opt". When I type "which port" in the shell, it returns "/opt/local/bin/port".
But something weird happens when I ask to install the port "octave-devel" (I've installed MacPorts to use Octave on my Mac in the first place). So when I enter the command "sudo port install octave-devel +atlas+docs" (as explained in GNU Octave wiki) in the terminal and type my password, the shell replies "Error: Port octave-devel not found". However the port "octave-devel" seems to exist because I've found its description on this page of the macports website.
Because I had to use Octave quickly I first wanted to uninstall MacPorts and install Fink instead and I tried the method described on the MacPorts website but after I typed "sudo port -fp uninstall installed" it returned "Error: No ports matched the given expression". I couldn't even uninstall this software! I really think that it is a problem of MacPorts itself and not the octave port but I can't find what exactly.
Eventually I used Octave on a Windows computer but it annoys me not to know what is wrong with MacPorts on my computer. And mainly, I want to be capable to use GNU Octave on my Mac because I need it for school.
Thank you in advance and happy holidays.
I'm not sure which version of OSX you are running, however, I have octave (not octave-devel) version 3.6.4 installed via macports on a machine running OSX 10.9.1. This was built using:
sudo port install octave
which yields a known bug building the atlas dependency that results from a missing fortran compiler. At this point you have two options. Before attempting to install octave first try to install atlas separately, either overriding the standard clang compiler with the gcc4x flag, or install atlas using:
sudo port install atlas +nofortran
which runs fine using clang. With atlas installed, octave should build to completion although there is a possibility that you will find an error regarding the use of arpack by apple as a vector library. Using +arpack is preferred, so it may be useful to load this by hand as well before starting your octave install.
Trying to install Octave using MacPorts I ran into a similar problem.
Summary
My solution was to first clean & build atlas separately using gcc47 instead of the default mpclang34. Then to build the default octave.
Details
This is on a MacBook running an older OS (10.7.5), the standard Octave (3.8.2) package failed to build - it hung on building the atlas dependency.
Solution:
sudo port clean atlas
sudo port -v install atlas +gcc48
sudo port -v install octave +atlas+docs
I'm currently going through the process of installing Octave via MacPorts. I used the following command which I found on Shifteleven.com:
sudo port install octave-devel +gcc45
It seems to be working so far. You also need to make sure you've installed the Xcode command line tools, which is something that I forgot to do the first time I tried.
I also ran into problems installing Octave using Macports on OSX 10.10.1 and solved them, similar to #Tom_N_PDX and #isak.
Short version
I got it working using one of the options described by #isak.
More detailed version
Running sudo port install octave failed because of the missing Fortran compiler problem.
I next installed Fortran using Macports sudo port install gcc48 and then tried re-installing Octave
sudo port clean octave
sudo port install octave
This "hung" on Atlas, as others have mentioned, although I now realize it just takes a long time and I killed it before it finished. Likely it would have worked, as the output said it had found Fortran
Selected C compiler: /usr/bin/clang
Selected F77 compiler: gfortran48
I then installed atlas separately, using the +gcc48 flag, as suggested by #isak
sudo port install atlas +gcc48
but it displayed the same compiler information as above (consistent with my conjecture that the above would have worked). This process took about 4 hours. You can monitor the progress of the task in the logfile (found with the command sudo port logfile atlas), which reassures you it's doing something and not "hung". (Oddly the output does halt mid-message, but it always eventually resumed. Also there were a lot of warning messages.)
Last, running the following worked:
sudo port clean octave
sudo port install +arpack
I actually first tried without the +arpack option and it worked but I got the following message, consistent with #isak's answer
WARNING: Dependency 'arpack' is installed with the +accelerate variant, using Apple's Vector Libraries which have some known bugs that can cause Octave to crash if using certain functions in arpack. The +atlas variant does not have these issues with Octave, but does take many hours to compile even on modern hardware.
When I reinstalled Octave with the +arpack flag it took less than a minute (because I had already installed Atlas).
I had a similar problem with MacPorts. I would recommend using HomeBrew instead. Here are the commands to install Octave on HomeBrew:
/usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
brew update
brew upgrade
brew install octave