I am trying to configure ejabberd with mysql database. After changes into the yml file i got this error while starting node.
2017-01-09 13:07:27.386 [critical] <0.38.0>#ejabberd:exit_or_halt:133 failed to start application 'p1_mysql': {error,
{"no such file or directory",
"p1_mysql.app"}}
Searching for solutions encountered with a step to hit './configure'
But i cannot locate the directory.
Tried it in /var/lib/ejabberd as well. says "not found"
Installed on Ubuntu using apt-get install ejabberd
How do i hit configure to do the needful.
If you're building from source, you should enable mysql support via configure script, e.g.
$ ./autogen.sh # Only needed if building directly from github repo
$ ./configure --enable-mysql
$ make
Related
I am trying to configure Cygnus in my FIWARE instance. Following the readthedocs tutorial I execute the following command:
yum install java-1.7.0-openjdk-devel
And the following error is listed:
Loaded plugins: fastestmirror, presto
Setting up Install Process
Loading mirror speeds from cached hostfile
*base: mirror.gadix.com
*epel: mirror.airenetworks.es
*extras: mirror.gadix.com
*updates: mirror.airenetworks.es
http://repositories.lab.fiware.org/repo/rpm/6/repodata/repomd.xml:
[Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 404 Not Found"
Trying other mirror.
Error: Can not retrieve repository metadata (repomd.xml) for repository: fiware. Please verify your path and try again
Anyone have any idea what it can be and how to solve it? I'm new to Linux environment.
It is working fine for me, please refer to this answer to clean the metadata and try installing again.
RHEL documentation mentions similar commands for OpenJdk devel installation.
or run the following commands and try installing it again:
yum clean all
yum makecache
yum update
Java version was changes in the past and newest Cygnus version (1.12.0 by the time being) uses Java 1.8, so probably you should run:
yum install java-1.8.0-openjdk-devel
I'd recommend to have a look to the RUN statement in Dockerfile. The same procedure used to build the docker container can be done to do local installations of Cygnus.
Question is not repeated, first read the problem which I am facing, then mark it if it is repeated, will be helpful if repeatation of my question helps me in solving my problem, As I have been through all the links and solutions mentioned on other similar questions and problems but no luck.
I am trying to setup redmine git on my ec2-aws-instance with help of below link
https://docs.bitnami.com/installer/how-to/configure-advanced-integration-git-redmine/
I am able to properly connect redmine projects with my git repositories but once I reach third step on above link I am facing issue as below
step :- 3 Configure Git Access Control
Below is the error when try to secure my git repository with redmine user credentials.
[Thu Feb 21 17:46:26.918619 2019] [perl:error] [pid 26820:tid
139790464616192] [client 127.0.0.1:50156] install_driver(mysql)
failed: Can't locate DBD/mysql.pm in #INC (#INC contains:
/opt/bitnami/git/lib/site_perl/5.16.3
/opt/bitnami/perl/lib/5.16.3/x86_64-linux-thread-multi
/opt/bitnami/perl/lib/5.16.3
/opt/bitnami/perl/lib/site_perl/5.16.3/x86_64-linux-thread-multi
/opt/bitnami/perl/lib/site_perl/5.16.3
/opt/bitnami/perl/lib/5.16.3/x86_64-linux-thread-multi
/opt/bitnami/perl/lib/site_perl/5.16.3/x86_64-linux-thread-multi
/bitnami/ruby23stack-linux-x64/output/perl/lib/site_perl/5.16.3/x86_64-linux-thread-multi
/bitnami/ruby23stack-linux-x64/output/perl/lib/site_perl/5.16.3
/bitnami/ruby23stack-linux-x64/output/perl/lib/5.16.3/x86_64-linux-thread-multi
/bitnami/ruby23stack-linux-x64/output/perl/lib/5.16.3 .
/opt/bitnami/apache2) at (eval 6) line 3.\nPerhaps the DBD::mysql perl
module hasn't been fully installed,\nor perhaps the capitalisation of
'mysql' isn't right.\nAvailable drivers: DBM, ExampleP, File, Gofer,
Proxy, Sponge.\n at
/opt/bitnami/perl/lib/site_perl/5.16.3/x86_64-linux-thread-multi/Apache/Redmine.pm
line 557.\n App 26921 stdout:
Without third step my repositories are public, any who knows the repo url can clone my repos or perform other operations on my git repos. So third step is for security purpose as per above document link and which is important for me.
Once I add below line into apache config as per documentation mentioned I am getting above error in my bitnami log when I try to clone a repository
<Location "/">
AuthType Basic
AuthName "Redmine git repositories"
Require valid-user
PerlAccessHandler Apache::Authn::Redmine::access_handler
PerlAuthenHandler Apache::Authn::Redmine::authen_handler
RedmineDSN "DBI:mysql:database=bitnami_redmine;host=localhost;mysql_socket=installdir/mysql/tmp/mysql.sock"
RedmineDbUser "REDMINE_DB_USERNAME"
RedmineDbPass "REDMINE_DB_PASSWORD"
RedmineGitSmartHttp yes
</Location>
When I run a following command to clone a repo, without third step on documentation, I am properly able to clone the repo, but with third step I am failing and getting above error in log and below error on command line.
bitnami#127.0.0.1:/tmp$ git clone http://git.domain.com/test2
Cloning into 'test2'...
fatal: unable to access 'http://git.domain.com/test2/': The requested URL returned error: 500
I have even tried installing below package but no luck
sudo apt-get install libdbd-mysql-perl
my os is
Ubuntu 16.04.5 LTS \n \l
In order for a Perl installation to talk to a MySQL database, it needs to use the DBD::mysql module. This module isn't part of the standard Perl installation and needs to be installed separately. When you install it using the CPAN command line tool (cpan DBD::mysql) or using apt-get (apt-get install libdbd-mysql-perl) it is installed in the library directories used by the system Perl (the one that is installed as part of your operating system). You can confirm that this has been installed correctly by running the following commands:
$ perldoc DBD::mysql
$ perl -MDBD::mysql -le'print $DBD::mysql::VERSION'
If DBD::mysql is installed correctly, the first command will show you the documentation for the module and the second will give the version number.
But, as I said, this is installed for use by the system Perl installation. It appears from the error message you're seeing that your Bitnami installation isn't using the system Perl. It is, instead, using a separate Perl installation which is installed in /opt/bitnami.
So you need to get DBD::mysql installed in the module library for this Perl installation. It's possible to ask cpan to install a module in a different directory, but I'd be wary about just installing stuff into Bitnami's directory tree. I strongly suspect that an installation step has been skipped far earlier in the process. If Bitnami needs to use MySQL from a Perl program and installs its own Perl distribution complete with its own module library, then it should either include DBD::mysql in its installation or provide clear instructions on how to install it.
My suggestion would be to carefully go over the installation instructions for Bitnami and see what they have to say about installing MySQL support. If that doesn't work, you should take this question to Bitnami's support channels.
I'm getting an error while trying to connect raspberry running ubuntu mate to my Google Cloud SQL instance.
These are the step I did to install:
git clone https://github.com/GoogleCloudPlatform/cloudsql-proxy
cd cloudsql-proxy/
sudo sh download_proxy.sh
My instance is configured this way (I deleted some characters in the image and in the code):
I didn't set the network because I'll be using proxy
Then I download into the same folder my JSON key.
wget https://drive.google.com/file/d/my_key.json
And the start the proxy
sudo ./cloud_sql_proxy -instances=be - 21:us-central1:be =tcp:3306 \
-credential_file=./my_key.json &
But I'm getting the error:
pi#pi:~/cloudsql-proxy$ ./cloud_sql_proxy: 1: ./cloud_sql_proxy:
Syntax error: ")" unexpected
I've tried removing the .json and I was getting the same error before without credential, I think that the problem is in the setup.
My dir ls is:
Any help is appreciated :)
download_proxy.sh downloads the proxy compiled for the amd64 architecture of CPU (aka x86_64). Your raspberry Pi has a ARM CPU, so this binary cannot run on your machine.
Google does not provide pre-build ARM versions of the proxy. I don't even know if it is able to build on ARM CPU. If it is possible, this is how you must do it:
Install go, e.g. with apt-get install golang
Setup a GOPATH, as per https://github.com/golang/go/wiki/GOPATH
Run go get github.com/GoogleCloudPlatform/cloudsql-proxy/cmd/cloud_sql_proxy
Run the proxy with $GOPATH/cloud_sql_proxy -instances=...
Ok.
I'm sharing what I did to make it work, as David I don't know what version was I downloading.
I tried to avoid installing Go but it was the only way to get it installed.
sudo apt-get install golang-go
export GOPATH=$HOME/go
go get github.com/GoogleCloudPlatform/cloudsql-proxy/cmd/cloud_sql_proxy
cd $GOPATH/bin
wget your_key.json
sudo ./cloud_sql_proxy -instances=the_full_name_of_the_instance=tcp:3306 -credential_file=./your_key.json &
But I was getting a error because I already have mysql running localy in the same port
So now I'm using a unix soquet
sudo ./cloud_sql_proxy -instances=the_full_name_of_the_instance -credential_file=./your_key.json &
And then it's ready for connections :)
Thanks guys
I found issues with this when compiling SQL-proxy. I did, however, find the instructions here worked great on my raspberry pi 3. Have to make sure to remove all prior installations then reinstall it
wget https://storage.googleapis.com/golang/go1.9.linux-armv6l.tar.gz
sudo tar -C /usr/local -xzf go1.9.linux-armv6l.tar.gz
export PATH=$PATH:/usr/local/go/bin # put into ~/.profile`
I am using CakePHP 3 and MAMP Pro server for my project. When I am trying to bake the cake, this error shows up:
Fatal error: You must enable the intl extension to use CakePHP.
I have even included intl.so and extension=php_intl.dll in my php.ini file but couldn't figure out solution for this error.
this issue was happening to me some days ago. I had installed Ubuntu 18.04 and php 7.1.
I was trying to run the comman php cake.php bake in orden to use cakephp's console but I was getting the following error message:
You must enable the intl extension to use CakePHP.
This extension (intl) was installed for php 7.1 (php7.1-intl) but this message was appearing every time I used php cake.php bake
After some google searches, I saw that I have to install the extension but with the following command:
sudo apt-get install php-intl
The same issue happened with mbstring extension, I used the command:
sudo apt-get install php-mbstring
then I restarted the apache server with:
sudo service apache2 restart
It's difficult to pinpoint exactly what's wrong without seeing your system setup. However based on what was said in the question, you may be setting up the intl extension incorrectly.
First off, if your OS is Linux/macOS and the PHP extension is a shared library (i.e. has a .so extension) then the php.ini entry should be extension=intl.so not extension=php_intl.dll. Also make sure the intl.so file is in the directory configured under the ini entry extension_dir. Otherwise make sure the extension ini entry is fully qualified (e.g. extension=/path/to/extension/dir/intl.so).
If you are using a Linux OS that has a package manager such as Debian/Ubuntu, you may be able to more easily install the extension for the PHP packaged for that distro. For example, in Ubuntu/Debian the package php5-intl provides the intl extension for PHP5 (I assume it's something similar for PHP7 if you've enabled those repos).
If you build PHP from source, you can try bundling the extension into your PHP. See the instructions from the manual.
I faced the same issue.
I added extension="php_intl.dll" in php.ini and restarted the Apache server.
Now it is working.
I had the same issue. After starting from scratch, I did :
$ brew install php
$ composer install && composer update && composer dump-autoload --optimize
$ composer self-update && composer create-project --prefer-dist cakephp/app:^3.8 cms
$ cd cms
$ bin/cake server
And it was working !
This question might not be appropriate to ask in this forum but unfortunately the linux stack forum is not as active as here.
I installed mysql and apache2 successfully on my linux (kaliv2 x64 on vmware) and used it. I decided to use webmin as well but I have been facing some problems:
for mysql it says
The MySQL startup script (/usr/bin/safe_mysqld was not found on your system. Maybe MySQL is not installed, or your module configuration is incorrect
I can not find safe_mysqld in my directories. apparently safe_mysqld has been changed to mysqld.sock (/var/run/mysqld/mysqld.sock) however when I change /usr/bin/safe_mysqld to mysql.sock I still facing the error.
for apache2
The Apache configuration file /etc/apache2 does not exist. If you have Apache installed, adjust the module configuration to use the correct path.
I should mention that Apache Webserver is located in unused modules
Use locate command to find mysqld_safe, apache2 and maybe apachectl. In case you couldn't find mysqld_safe, look for mysqld. As for apache2 look for BOTH file and directory with this name - the first one is a command to start and stop the service, the second one is the server root directory which contains bin/httpd and bin/apachectl.
Apparently all configuration for MySQL is correct except
"Command to start MySQL server" : /etc/init.d/mysql
And for Apache I did as below
"Apache server root directory" :/etc/apache2
"Path to httpd executable" :/etc/init.d/apache2
"Path to httpd.conf or apache2.conf" :/etc/apache2/apache2.conf
"Path to access.conf" : Automatic