Adding to and holding a div's width value with SCSS? - html

Basically I have a div that I'm trying to figure out how to increase the width based on checkboxes selected, and add to that width as more become checked.
Example HTML (sorry if the syntax is a bit off I'm writing from memory):
<div class="barDiv"></div>
<label for="cb50"><h2>Click me to add 50!</h2></label>
<input type="checkbox" id="cb50">
<label for="cb30"><h2>Click me to add 30!</h2></label>
<input type="checkbox" id="cb30">
Example SCSS:
$add: 0px;
.barDiv {
width: $add;
height: 10px;
background-color: #444;
}
#cb50:checked {
~ .barDiv {
width: $add + 50px;
}
}
#cb30:checked {
~ .barDiv {
width: $add + 30px;
}
}
If I wrote it right then my setup works individually, but I want the width to be 80px when both are checked and instead it just switches between the two widths. I know I've seen this done with LESS and I'm hoping it's doable with SCSS as well. Thanks for any help!

For this to work you need the .barDiv to appear under both checkboxes in the DOM (the ~ selector is for next siblings, not prev).
You will also need to create the rule for when both checkboxes are checked.
Here is an example with pure css (note the sass is eventually compiled to css), I hope it is what you are looking for:
.barDiv {
width: 0;
height: 10px;
background-color: #444;
}
#cb50:checked ~ .barDiv {
width: 50px;
}
#cb30:checked ~ .barDiv {
width: 30px;
}
#cb50:checked ~ #cb30:checked ~ .barDiv {
width: 80px;
}
<label for="cb50"><h2>Click me to add 50!</h2></label>
<input type="checkbox" id="cb50">
<label for="cb30"><h2>Click me to add 30!</h2></label>
<input type="checkbox" id="cb30">
<div class="barDiv"></div>

Related

HTML Collapsible Button - How to make div appear after button?

I am trying to make a collapsible button with pure HTML and CSS. Here is what I have:
#hidden {
display: none;
height: 100px;
background: red;
}
:checked+#hidden {
display: block;
}
<input type="checkbox" id="my_checkbox" style="display:none;">
<div id="hidden"></div>
<label for="my_checkbox">Show/hide</label>
This works. However, I want the hidden div to come after the button instead of before. When I move the div to after the checkbox label, it does not work.
How can I fix this ?
Thanks!
You want to use a different CSS selector. The below uses the General sibling combinator to target the div no matter its order with respect to the input element (so long as it follows it).
#hidden {
display: none;
height: 100px;
background: red;
}
:checked ~ #hidden {
display: block;
}
<input type="checkbox" id="my_checkbox" style="display:none;">
<label for="my_checkbox">Show/hide</label>
<div id="hidden"></div>
use negation instead of +, so that it will select all divs related to that class name
#hidden {
display: none;
height: 100px;
background: red;
}
:checked~#hidden {
display: block;
}
<input type="checkbox" id="my_checkbox" style="display:none;">
<label for="my_checkbox">Show/hide</label>
<div id="hidden"></div>

Difficulty with checkbox hack syntax

I want to both style a label and reveal a div when a checkbox is checked. I have found ways to do one or the other, but not both, and I don't understand why. Note the CSS is the exact same in both examples and is:
input {
display: none
}
.layerpic {
height: 100px;
width: 100px;
background: red;
opacity: 1;
float: left;
}
label {
clear: none;
float: left;
}
.xyz input:checked + .layerpic{
opacity: 0.5;
}
.xyz input:checked + label {
font-weight: bold;
}
Now the HTML. This example allows the div to be affected, but not the label. Note the only difference is in the html where the label comes before the input:
<div class ="xyz">
<label class="ribs" for="hider2">Hide layer</label>
<input type="checkbox" id="hider2">
<div class="layerpic"> hi
</div>
</div>
This example allows the label to be affected, but not the div:
<div class ="xyz">
<input type="checkbox" id="hider2">
<label class="ribs" for="hider2">Hide layer</label>
<div class="layerpic"> hi
</div>
</div>
Can anyone explain why different elements are affected just by flipping which HTML comes first, and is it possible to have both elements affected when the checkbox is checked?
You need to rearrange your HTML, then use + and ~ selectors
input {
display: none
}
.layerpic {
height: 100px;
width: 100px;
background: red;
opacity: 1;
float: left;
}
label {
clear: none;
float: left;
}
.xyz input:checked+.layerpic {
opacity: 0.5;
}
.xyz input:checked~label {
font-weight: bold;
}
<div class="xyz">
<input type="checkbox" id="hider2">
<div class="layerpic"> hi</div>
<label class="ribs" for="hider2">Hide layer</label>
</div>

How do CSS radio tabs work?

Could someone explain how the last part of the code works? Specifically:
[type=radio]:checked {
}
[type=radio]:checked ~ .content {
z-index: 1;
}
I'm just starting with CSS as a newb and wanted to try to create some interactive CSS tabs; which lead me to look at some existing code out there. Needless to say it has left me quite confused.
Why is [type=radio]:checked needed? It had z-index: 2; inside the brackets but I took that out and the code still works just fine; although when I try and delete [type=radio]:checked all together the code breaks. Why? It has no properties currently.
[type=radio]:checked ~ .content used to be [type=radio]:checked ~ label ~ .content but I took out label and it still works fine. Why was it ever needed?
HTML:
<div class="tab">
<input type="radio" id="tab-1" name="tab-group-1" checked>
<label for="tab-1">Tab One</label>
<div class="content">
tab#1
</div>
</div>
<div class="tab">
<input type="radio" id="tab-2" name="tab-group-1">
<label for="tab-2">Tab Two</label>
<div class="content">
tab#2
</div>
</div>
<div class="tab">
<input type="radio" id="tab-3" name="tab-group-1">
<label for="tab-3">Tab Three</label>
<div class="content">
tab#3
</div>
</div>
</div>
</html>
CSS:
.tabs {
position: relative;
height: 200px; /* This part sucks */
clear: both;
margin: 25px 0;
}
.tab {
float: left;
}
.tab label {
background: #eee;
padding: 10px;
border: 1px solid #ccc;
margin-left: -1px;
position: relative;
left: 1px;
}
.tab [type=radio] {
display: none;
}
.content {
position: absolute;
top: 28px;
left: 0;
background: white;
right: 0;
bottom: 0;
padding: 20px;
border: 1px solid #ccc;
}
[type=radio]:checked {
}
[type=radio]:checked ~ .content {
z-index: 1;
}
The last part of your CSS:
[type=radio]:checked {
}
[type=radio]:checked ~ .content {
z-index: 1;
}
This is giving a z-index to the class content. Since only one tab is clicked it is giving a z-index to only one content class and that makes it display. (Since no others have a z-index)
If you want to see how it works then add a z-index to the content class, lets say 10, in your CSS and watch how it gets all screwy. Now since that code is only giving a z-index: 1; it doesn't display correctly since they all have 10 in this example. Now go to the above snidbit of code and put a z-index: 11; and watch how it works correctly. Since only one gets a high z-index: 11; it becomes the displaying one.
If you don't know what the [type=radio]:checked means, it is pertaining to an active state or clicked state for that radio input.
This part of code: [type=radio]:checked ~ label ~ .content is allowing a more distinguished and precise selection of a DOM element. It will work without it because .content is below the radio tag. It will only apply to an element that is 1. input radio > 2. label > 3. .content.
If you also don't know what z-index does then let me know and I'll brake that down.

Can you style an active form input's label with just CSS

Given the following html
<label for="inputelement">label</label>
<input type="text" id="inputelement" name="inputelement" />
You can style the input on focus using
input:focus { background: green; }
Is there a way of also styling the <label /> without JavaScript?
Thanks all
No. there is unfortunately no predecessor selector in css
input:focus -+ label { ... }
would be lovely.
having the label after the input would be dooable:
input:focus + label { ... }
you could use some positioning to display before...
For completeness, if your input field is within the label you can use focus-within:
HTML:
<label>
<input name="example" type="text">
</label>
CSS:
label:focus-within {
background: #DEF;
}
UPDATED
Make sure you check the draft as this may change: https://drafts.csswg.org/selectors-4/#relational
The :has() relational pseudo-class will allow the selection of parents for example, the following selector matches only <a> elements that contain an <img> child:
a:has(> img)
This can be combined with other selectors such as :focus, :active or :not to offer a lot of potential.
Unfortunately browser support isn’t great at the time of writing: https://caniuse.com/#feat=css-has
Adding this for people finding this page in the future. CSS4 will have a parent selector allowing you to choose what element to apply the style to:
I think the current spec allows you to specify which item is matched with a ! sign - the subject selector.
label! > input {
font-weight: bold;
}
This allows far greater control than just parent, for example in this scary chain below the p tag is the target!
article > h1 + section > p! > b > a {
font-style: italic;
}
You can use an attribute selector:
label[for=inputelement]:focus,
label[for=inputelement]:active {
/*styles here*/
}
Note that this isn't supported by IE6, but should work in all other browsers, including IE7 and IE8.
That will obviously only work for that specific ID. If you would like it to work for all IDs, simply leave out the ID:
label[for]:focus,
label[for]:active {
/*styles here*/
}
This will now work for all labels with a for attribute.
If you need something in between, you'll need to use classes.
You can, so long as the label follows the input in the Mark-up:
input:focus + label,
input:active + label {
/* style */
}
Okay the idea is to wrap the input, label, help, error etc. in a Flexbox Container.
Then use the + selector, to select the label element.
Note: it will work only when <label> comes after <input>
Then you define the <label> order by using the flexitem order property.
Sure you can also using classnames.
.container {
display: flex;
flex-direction: column;
}
input {
border: none;
}
label {
order: -1;
}
input:focus {
border: 1px solid red;
}
input:focus + label{
color: red;
}
<div class="container">
<input id="username" />
<label for="username">Username</label>
</div>
Yes, of course you can.
You'll need to:
Group both label and the form into a parent element (like a div)
Style the label with focus pseudo selector selector for the parent, ie .parent:focus label { color: green }
You can see a very minimal sample at jsfiddle I made.
<div class='workarea'>
<div class='hasinput'>
<label>Label 1 (should be green when active)</label>
<input />
</div>
<div class='hasinput'>
<label>Label 2 (should be green when active)</label>
<input />
</div>
</div>
.workarea {
max-width: 500px;
}
label,
input {
width: 100%;
}
.hasinput {
margin-bottom: 1rem;
}
.hasinput label {
color: blue;
}
.hasinput:focus-within label {
color: green;
}
Give your input button a style class
css style:
INPUT.book:hover, INPUT.book:focus:hover {
background-image:url(book_over.png);
background-repeat:no-repeat;
height: 40px;
width: 140px;
font-family:calibri, Tahoma;
font-size:20px;
color:#ffffff;
text-align: center;
font-weight: bold;
}
INPUT.book {
background-image:url(book_active.png);
background-repeat:no-repeat;
height: 40px;
width: 140px;
font-family:calibri, Tahoma;
font-size:20px;
color:#ffffff;
text-align: center;
font-weight: bold;
}
and the input html:
<input name="Bestil2" type="submit" class="book" value="Book møde" />
I haven't figured out yet, how to avoid grey background even though I have a transparent png file, maybe just an jpg will do. But I hope this helps.
Good luck :-)
Here is an alternative usign CSS grid:
As some sugested if the label is after the input then using flex or in my case using CSS grid you can place the label first.
body {
font-family: Arial;
}
.form-field {
display: grid;
gap: 4px;
}
.form-field label {
grid-row: 1;
font-size: 12px;
color: #737373;
}
.form-field input {
outline: unset;
border-radius: 6px;
padding: 6px 10px;
font-size: 14px;
border: 1px solid #737373;
}
.form-field input:focus {
border-color: #328dd2;
}
.form-field input:focus + label {
color: #328dd2;
}
<div class="form-field">
<input id="myinput" />
<label for="myinput">
My Input
</label>
</div>
This can be done if you target browsers that support flexbox - see this: http://plnkr.co/edit/g376cf38iphfvGfSubOz?p=preview
For brevity, the css there is minimal but you'll need some browser specific prefixes to extend support to somewhat older browsers.

Make radio button bigger?

Is there any way to make a radio button bigger using CSS?
If not, how else can I do it?
Try this code:
input[type='radio'] {
transform: scale(2);
}
You can easily able to set it's height and width as with any element.
Here is the fiddle with code
JSFIDDLE BIG RADIO BUTTON
HTML
<input id="r1" type="radio" name="group1" class="radio1" />
<label for="r1">label 1 text</label>
<input id="r2" type="radio" name="group1" class="radio2" />
<label for="r2">label 2 text</label>
<input id="r3" type="radio" name="group1" class="radio3" />
<label for="r3">label 3 text</label>
<input id="r4" type="radio" name="group1" class="radio4" />
<label for="r4">label 4 text</label>
CSS
input[type=radio] {
display: none;
}
input[type=radio] + label::before {
content: '';
display: inline-block;
border: 1px solid #000;
border-radius: 50%;
margin: 0 0.5em;
}
input[type=radio]:checked + label::before {
background-color: #ffa;
}
.radio1 + label::before {
width: 0.5em;
height: 0.5em;
}
.radio2 + label::before {
width: 0.75em;
height: 0.75em;
}
.radio3 + label::before {
width: 1em;
height: 1em;
}
.radio4 + label::before {
width: 1.5em;
height: 1.5em;
}
Styling radio button is not easy.
Form elements in general are either problematic or impossible to style using CSS alone.
Just go through this link for your own style with bigger size for radio buttons..
Also look at this link...
Bigger radio buttons
Don't use transform: scale(1.3), it really looks horrible. Just use this:
input[type='radio'] {
height: 15px;
width: 15px;
vertical-align: middle;
}
<input type="radio">Select this item
You can do it using CSS but browser and OS also impact on this. Look at following article.
Styling radio buttons with CSS
Try this:
HTML
<label>
<input type="radio" value="1">
<div></div>
</label>
CSS
input[type="radio"] {
display: none;
}
input[type="radio"] + div {
height: 20px;
width: 20px;
display: inline-block;
cursor: pointer;
vertical-align: middle;
background: #FFF;
border: 1px solid #d2d2d2;
border-radius: 100%;
}
input[type="radio"] + div:hover {
border-color: #c2c2c2;
}
input[type="radio"]:checked + div {
background:gray;
}
DEMO: http://jsfiddle.net/nuzhysgg/
There might be some quirky <span> tricks inside radio elements but I imagine using them across different browsers would be annoying to debug.
I've used this script in the past but not recently.
CSS3 transform scale is blurry. Setting height & width does not work with FF (even the newest 66 does not support, 2020). The only cross-browser solution is custom HTML markup + CSS, which unfortunatelly is not the easiest way. See helpful tutorial custom radios & checkboxes.