I have many Simulink model files and three *.m configuration scripts. When I run the scripts, it doesn't change the Simulink model setting. How can I run the scripts from command line and save the setting as default?
To clarify my question, the *.m files contain all the required configuration settings for Simulink models. For example: model = Simulink.ConfigSet; model.switchTarget('grt.tlc'); Running a script that contains these commands is supposed to set the System target file to 'grt.tlc'. I initially set the system target file to 'ert.tlc' and run the scripts. However, I don't see any change on the configuration setting after running the scripts. I'm looking for the steps I need to follow to perform this task.
Thanks!
Thanks for the reply, I have figured it out. I opened a model explorer and imported the configuration script to the Simulink model. Then, activating the configuration and saving the model will permanently change the setting. To use the same configuration to multiple model, change the configuration into 'Active Configuration Reference', which will put the reference under the Base Workspace and can be referenced from any Simulik model and activated.
Helpful Simulink documentations for adding and referencing configurations.
Related
I have a Nightwatch + BrowserStack configuration on my project and I'm trying to add custom commands to my project to compare 2 screenshots using resemble.js .
I configure my nightwatch.json file with this :
"custom_commands_path": "./node_modules/nightwatch/commands",
"custom_assertions_path": "./node_modules/nightwatch/assertions"
I put the commands file in the folder and I tried to run my test in every directory possible to see if it was a path problem. I've also tried with different commands, some of them I get online and even the default example one. Whatever I run it returns nameOfTheCommand is not a function. So I guess it does not even find the path to the customs commands in the nightwatch.json file.
Is there anything I'm missing here? I'm quite new so the answer could be very simple but I tried every .json file of my project in case there was a special configuration linked to BrowserStack.
Path to the custom commands should be analogous to the path to custom commands. You should point a folder where you added them.
I've found that if I put them in the suite configuration file, it picks them up:
nightwatch_config = {
src_folders: ["tests/suite/product/"],
page_objects_path: "pages/product",
custom_commands_path: "./custom_commands"
}
We have a need to set some directives in the snappy config files for the various components (servers, locators, etc).
The snappy_ec2 scripts do a good job at creating all of the config's and keeping them in sync across the cluster, but I need to find a serviceable method to add directives to the auto generated scripts.
What is the preferred method using this script?
Example: Add the following to the 'servers' file:
-gemfirexd.disable-getall-local-index=true
Or perhaps I should add these strings to an environments file such as
snappy-env.sh
TIA
-doug
Have you tried adding the directives directly in the servers (or locators or leads) file and placing this file under (SNAPPY_DIR)/ec2/deploy/home/ec2-user/snappydata/? The script would read the conf files under this dir at the time of launching the cluster.
You'll need to specify it for each server you want to launch, with the name of server as shown below. See 'Specifying properties' section in README, if you have not already done so. e.g.
{{SERVER_0}} -heap-size=4096m -locators={{LOCATOR_0}}:9999,{{LOCATOR_1}}:9888 -J-Dgemfirexd.disable-getall-local-index=true
{{SERVER_1}} -heap-size=4096m -locators={{LOCATOR_0}}:9999,{{LOCATOR_1}}:9888 -J-Dgemfirexd.disable-getall-local-index=true
If you want it to be applied for all the servers, simply put it in snappy-env.sh as you mentioned (as SERVER_STARTUP_OPTIONS) and place the file under directory mentioned above.
We could have read the conf files directly from (SNAPPY_DIR)/conf/ instead of making users copy it to above location, but we may release the ec2 scripts as a separate package, in future, so that the users do not have to download the entire distribution.
Packaging a log4j configuration file in a NetBeans Platform application apparently requires some thinking through. This is what I tried...
I put log4j.xml in src/main/resources/my/package/log4j.xml of some_netbeans_module. The package is a public module package (i.e. classes from this package are used from other packages). I rebuilt the module and confirmed that the file does, in fact, get packaged into the module.
In my classes I get an instance of the logger the way I always do:
static final Logger log = Logger.getLogger(ThisClass.class);
Every NetBeans Platform application has a my_app.conf file which makes it possible to set certain properties. This is where I set log4j.conf:
log4j.configuration="/my/package/log4j.xml"
Now, when I run the application, I see the following output:
[INFO] /home/me/my_app/application/target/my_app/bin/../etc/my_app.conf: 5:
log4j.configuration=/my/package/log4j.xml: not found
What is wrong with the above configuration?
In the my_app.conf file if you append the log4j.configuration property to the default_options property, like so:
default_options="...<other options> -J-Dlog4j.configuration=my/package/log4j.xml"
then this option will get passed to the JVM. Notice that the log4j property has -J-D appended to it. The -J is used by NetBeans to delineate JVM properties and the -D is used by the JVM to delineate a system property.
Also you can/should drop the quotes and the initial / as the quotes are not necessary and NetBeans will complain if you have the initial /
The other way to do this, and the way that I prefer since it doesn't require editing the .conf file, is to put the log4j.xml file into the default package. If you have other requirements that prevents you from doing this then remember that you must put the log4j.configuration property in the app's platform.properties file while your in dev mode and running the app inside of the IDE. Like so:
run.args.extra=-J-Dlog4j.configuration=my/package/log4j.xml
Edit: For questions regarding NetBeans Platform you might have better luck posting to the NetBeans Platform Users forum.
The main problem is: How do i incorporate an appSettings.Config file with a particular build(dev, stage, live)? My appSettings.Config changes the conx strings for data sources based on which server the package is being deployed to. I am able to go through Package configurations and add my appSettings.Config, however, I can only specifically add one file dev, stage, or live. What i need to do is be able to build the solution and based on teh build type incorporate the dev/stage/live appsettings. How could I do this?
You could include all of the configuration files in the install and then just point to the correct one through an environment variable. I know you're wanting to switch the configuration file based on the solution build configuration, but you'll be looking at a complex solution when a simpler alternative exists.
Its quite straight-forward to add registry information during the package install that will set the machine's environment variable under the key:
HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\Environment\MyVariable
...to the path of the .dtsConfig for the current environment.
I'm using the Maven Appassembler plugin to package my application. I'd like to package some configuration files with the application. I've found the configurationDirectory and includeConfigurationDirectoryInClasspath parameters, but I haven't found how I should create (and populate) that configuration directory. I've tried putting the files in src/main/resources, but that just puts them in the jar file for my project.
What is the "proper" way to do this, using maven?
Unfortunately this is a limitation of the appassembler plugin in the current release version. Typically, the plugin is used in conjunction with the assembly plugin to produce the final artifact, in which you can include the reference to your configuration directory. However, if you'd like to have a functional structure from just the appassembler plugin you need to manually copy the files into place. An example using the antrun plugin with a src/main/conf directory can be found here: http://svn.apache.org/viewvc/archiva/trunk/archiva-jetty/
By default, the plugin uses the directory src/main/config.
Is possible to change the source for the config files using the parameter <configurationSourceDirectory>src/main/config</configurationSourceDirectory>
When I include the copyConfigurationDirectory property, it copies the config files and bundles them properly.
<configurationDirectory>etc</configurationDirectory>
<configurationSourceDirectory>src/main/config</configurationSourceDirectory>
<copyConfigurationDirectory>true</copyConfigurationDirectory>
I have a different problem though. I would like to filter my config files before copying, which is giving me some trouble.
Apart from that is does not generate the bin scripts for different platforms. The maven-assembly-plugin can create (package(s) {tar.gz, zip}) for distribution. These are configured through a assemble.xml. You specify which files go in (with what options (chmod)), etc. It can also filter files (search/replace values within them). etc.
Years later and in version 1.10 of the plugin there is now a preAssembleDirectory configuration option. Unfortunately I don't find it flexible enough for my needs because it copies directly into assembleDirectory and does not allow to specify a target directory path within assembleDirectory.