I'm not sure if this is a web2py problem or a general html problem, but when I create a form in web2py that contains an editable string in a textarea, and the string contains an initial newline, like "\nsecond_line", the textarea does not display or save the newline - it is cut out. It works fine if there is a character before the newline: "firstline\nsecond_line" shows as on two lines. It is also only relevant for the first newline. If I have a string like "\n\nthird_line", then the textarea shows a single newline at the start.
This is with the most recent (non beta) version of web2py, on safari 9.1.3 and chrome 56.0.2924.87.
Ah. "By HTML 4.0 appendix B chapter 3.1, “a line break immediately following a start tag must be ignored, as must a line break immediately before an end tag. This applies to all HTML elements without exception.”"
Related
My problem occurs when I try to use some data/strings in a p-element.
I start of with data like this:
data: function() {
return {
reportText: {
text1: "This is some subject text",
text2: "This is the conclusion",
}
}
}
I use this data as follows in my (vue-)html:
<p> {{ reportText.text1 }} </p>
<p> {{ reportText.text2 }} </p>
In my browser, when I inspect my elements I get to see the following results:
<p>This is some subject text</p>
<p>This is the conclusion</p>
As you can see, there is suddenly a difference, one p element uses and the other , even though I started of with both strings only using . I know and technically represent the same thingm, but the problem with the string is that it gets treated as a string with 1 large word instead of multiple separate words. This screws up my layout and I can't solve this by using certain css properties (word-wrap etc.)
Other things I have tried:
Tried sanitizing the strings by using .replace( , ), but that doesn't do anything. I assume this is because it basically is the same, so there is nothing to really replace. Same reason why I have to use blockcode on stackoverflow to make the destinction between and .
Logged the data from vue to see if there is any noticeable difference, but I can't see any. If I log the data/reportText I again only see string with 's
So I have the following questions:
Why does this happen? I can't seem to find any logical explanation why it sometimes uses 's and sometimes uses 's, it seems random, but I am sure I am missing something.
Any other things I could try to follow the path my string takes, so I can see where the transformation from to happens?
Per the comments, the solution devised ended up being a simple unicode character replacement targeting the \u00A0 unicode code point (i.e. replacing unicode non-breaking spaces with ordinary spaces):
str.replace(/[\\u00A0]/g, ' ')
Explanation:
JavaScript typically allows the use of unicode characters in two ways: you can input the rendered character directly, or you can use a unicode code point (i.e. in the case of JavaScript, a hexadecimal code prefixed with \u like \u00A0). It has no concept of an HTML entity (i.e. a character sequence between a & and ; like ).
The inspector tool for some browsers, however, utilizes the HTML concept of the HTML entity and will often display unicode characters using their corresponding HTML entities where applicable. If you check the same source code in Chrome's inspector vs. Firefox's inspector (as of writing this answer, anyway), you will see that Chrome uses HTML entities while Firefox uses the rendered character result. While it's a handy feature to be able to see non-printable unicode characters in the inspector, Chrome's use of HTML entities is only a convenience feature, not a reflection of the actual contents of your source code.
With that in mind, we can infer that your source code contains unicode characters in their fully rendered form. Regardless of the form of your unicode character, the fix is identical: you need to target these unicode space characters explicitly and replace them with ordinary spaces.
I am using gtk in an application and I make use of the abilities of gtklabel text to be rendered automatically as a clickable url. This works well most of the time, however with a url which contains parentheses "(" and ")" this does not work. The versions I use are the ones available on debian (old)stable, i.e. debian 6 (2.20) and 7 (3.4.2).
For example, I am trying to display the following url:
https://maps.google.com/maps?q=62.1891,+-141.5372+(Example+text+in+here+will+be+rendered+in+the+maps+label)&iwloc=A&hl=en
When I create a gtklabel with this text, for example:
text="<b>Click here for Map</b>\n"
Then it will display fine in the label as an underlined link in bold with the text Click here for Map
However when you click the link it will not show correctly and this error appears:
Gtk-WARNING **: Unable to show '(null)': Operation not supported
It looks like the parentheses mess up the rendering of the url by gtk.
Is there a way to escape the parentheses, or use a different character that works in the map url to create the label?
I have tried various methods of escaping it, however none were effective so far. Such as using %28 and %29 to replace the parentheses as well as backslashes as an escape character.
I am using the method described in https://developer.gnome.org/gtk2/2.24/GtkLabel.html and https://developer.gnome.org/gtk3/stable/GtkLabel.html under "Links" which allows automatic rendering of links:
Links
Since 2.18, GTK+ supports markup for clickable hyperlinks in addition
to regular Pango markup. The markup for links is borrowed from HTML,
using the a with href and title attributes. GTK+ renders links similar
to the way they appear in web browsers, with colored, underlined text.
The title attribute is displayed as a tooltip on the link. An example
looks like this:
1 gtk_label_set_markup (label, "Go to the http://www.gtk.org\" title=\"<i>Our&/i> website\">GTK+
website for more...");
I understand it is working in more recent releases of gtk (2.24 and 3.6), making sure to escape ampersands. But I was wondering if there is a work around for older gtk versions to avoid this problem?
You should be escaping your ampersands with &.
I'm pretty sure GTK prints out a runtime warning telling you this when you call gtk_label_set_markup().
Here's the warning on GTK 3.6.4:
Gtk-WARNING **: Failed to set text from markup due to error parsing markup: Error on line 1: Entity did not end with a semicolon; most likely you used an ampersand character without intending to start an entity - escape ampersand as &
jku is right, the ampersand need to be escaped. He're an example using the very same string as you, and it works (tested on 3.6.4 and 2.24.17).
#include <gtk/gtk.h>
int
main (int argc, char **argv)
{
gtk_init (&argc, &argv);
GtkWidget *window = gtk_window_new (GTK_WINDOW_TOPLEVEL);
// This one won't work, needs ampersand escaping
// GtkWidget *label = gtk_label_new ("<b>Click here for Map</b>\n");
GtkWidget *label = gtk_label_new ("<b>Click here for Map</b>\n");
gtk_label_set_use_markup (GTK_LABEL (label), TRUE);
gtk_container_add (GTK_CONTAINER(window), label);
gtk_widget_show_all (GTK_WIDGET (window));
g_signal_connect (window, "destroy", G_CALLBACK(gtk_main_quit), NULL);
gtk_main ();
return 0;
}
Original answer:
Have you tried to call gtk_show_uri with that link? You could then see if that's a problem with what handles URI's, or if it's the way your label is formatted/constructed.
set tabstop=4
set shiftwidth=4
set nu
set ai
syntax on
filetype plugin indent on
I tried this, content.gsub("\r\n","<br/>") but when I click the view/show button to see the contents of these line, I get the output/result=>
set tabstop=4<br/> set shiftwidth=4<br/> set nu<br/> set ai<br/> syntax on<br/> filetype plugin indent on
But I tried to get those lines as a seperate lines. But all become as a single line. Why?
How can I make all those lines with a html break (<br/>) ?
I tried this, that didn't work.
#addpost = Post.new params[:data]
#temptest = #addpost.content.html_safe
#addpost.content = #temptest
#logger.debug(#addpost)
#addpost.save
Also tried without saving into database. Tried only in view layer,<%= t.content.html_safe %> That didn't work too.
Got this from page source
vimrc file <br/>
2011-12-06<br/><br/>
set tabstop=4<br/><br/>set shiftwidth=4<br/><br/>set nu<br/><br/>set ai<br/><br/>syntax on<br/><br/>filetype plugin indent on<br/>
Edit
Delete
<br/><br/>
An alternative to convert every new lines to html tags <br> would be to use css to display the content as it was given :
.wrapped-text {
white-space: pre-wrap;
}
This will wrap the content on a new line, without altering its current form.
You need to use html_safe if you want to render embedded HTML:
<%= #the_string.html_safe %>
If it might be nil, raw(#the_string) won't throw an exception. I'm a bit ambivalent about raw; I almost never try to display a string that might be nil.
With Ruby On Rails 4.0.1 comes the simple_format from TextHelper. It will handle more tags than the OP requested, but will filter malicious tags from the content (sanitize).
simple_format(t.content)
Reference : http://api.rubyonrails.org/classes/ActionView/Helpers/TextHelper.html
http://www.ruby-doc.org/core-1.9.3/String.html
as it says there gsub expects regex and replacement
since "\n\r" is a string you can see in the docs:
if given as a String, any regular expression metacharacters it contains will be interpreted literally, e.g. '\d' will match a backlash followed by ‘d’, instead of a digit.
so you are trying to match "\n\r", you probably want a character class containing \n or \r -[\n\r]
a = <<-EOL
set tabstop=4
set shiftwidth=4
set nu
set ai
syntax on
filetype plugin indent on
EOL
print a.gsub(/[\n\r]/,"<br/>\n");
I'm not sure I exactly follow the question - are you seeing the output as e.g. preformatted text, or does the source HTML have those tags? If the source HTML has those tags, they should appear on new lines, even if they aren't on line breaks in the source, right?
Anyway, I'm guessing you're dealing with automatic string escaping. Check out this other Stack Overflow question
Also, this: Katz talking about this feature
I have a function which stores a string that has read off a StreamReader. The file in question contains horizontal tabs, which I know are registered as U+0009 in Unicode. I'd like to display the string in HTML, which involves some conversion obviously.
The code I've used to attempt this conversion is
readResults = readResults.Replace(ChrW(&H9), " ")
Unfortunately, no love. The tab is removed as is expected of any whitespace characters left undealt with. Any ideas?
EDIT:
Figured it out
readResults = readResults.Replace(vbTab, "<pre> </pre>")
Add the white-space:pre-wrap CSS property to your HTML element. This property will force all white-space (including tabs) to appear. When you also want to preserve newlines, use white-space:pre.
I have always used Replace(myString, vbCrLf, "<br/>") to show line breaks when outting something to a page from the database (retaining line breaks). I am now using a DetailsView that has a textarea as one of the fields and uses a LinqDataSource as its datasource. I want to allow users to type line breaks in the textarea and display them on a page (replaced with <br/>'s to show breaks in the HTML). Linq seems to be replacing the line breaks with something else that is now causing the Replace statement to not find the breaks, therefor not inserting the html <br/>. When loading the value from the database to a textarea the line breaks are still there though. I have tried replacing the following with <br> but none of it works.
vbCrLf
vbNewLine
Environment.NewLine
...none of those work... what do I need to find/replace with <br> to show breaks?
TextArea uses different newline characters depending on the browser:
Internet Explorer: \r\n
FireFox: \n
It has also been suggested that \r is used in some cases, although, I haven't come across those cases.
Carriage return is encoded as %0D and Line feed as %0A. So if your text is HTML encoded (as it should be), then you need to replace %0D and/or %0A [depending on your environment] with your <br />
Here is a full discussion on the topic http://www.highdots.com/forums/html/standard-newline-character-264611.html.
Look at the string as a byte array, what values are the line breaks? There are only so many options here, 10, 13, both, none?
This works great for me:
string Output = HttpUtility.HtmlEncode(DirtyText); // HTML Encode it first for safety..
return Output.Replace("\n", "<br />"); // Now replace New Lines with HTML BRs
You end up with a safe encoded output, but also nicely formatted line spacing exactly as entered by the user into a standard textarea.