I am getting a syntax error on executing the below function in MySQL.
CREATE FUNCTION FABC (P_MEMBER_EMAIL VARCHAR(30))
RETURNS int
BEGIN
DECLARE RESULT int;
DECLARE V_DATE DATE;
SELECT DOJ+365 INTO V_DATE FROM CHYK_MEMBER_MASTER
WHERE UPPER(MEMBER_EMAIL)=UPPER(P_MEMBER_EMAIL) AND SUBSCRIPTION='Y';
IF V_DATE>SYSDATE THEN
SET RESULT=1;
ELSE
SET RESULT=0;
END IF;
RETURN RESULT;
END;
The error is as follows "#1064 - You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '' at line 4
Not sure what's causing this. Can anyone help me ?
You need to set a delimiter that will tell MySQL the END of the function definition.
DELIMITER $$
CREATE FUNCTION `FABC`(`P_MEMBER_EMAIL` VARCHAR(30)) RETURNS int(11)
BEGIN
DECLARE RESULT int;
DECLARE V_DATE DATE;
SELECT DOJ+365 INTO V_DATE FROM CHYK_MEMBER_MASTER
WHERE UPPER(MEMBER_EMAIL)=UPPER(P_MEMBER_EMAIL) AND SUBSCRIPTION='Y';
IF V_DATE>SYSDATE THEN
SET RESULT=1;
ELSE
SET RESULT=0;
END IF;
RETURN RESULT;
END$$
DELIMITER ;
Related
DELIMITER //
CREATE FUNCTION fnc_credit_custstatus
RETURNS VARCHAR(6) DETERMINISTIC
BEGIN
DECLARE custstatus VARCHAR(6);
IF CustCredit>='1000',THEN SET custstatus='VIP';
ELSEIF CustCredit<'1000',THEN SET custstatus='NONVIP';
END IF;
RETURN (custstatus);
END//
DELIMITER ;
1 queries executed, 0 success, 1 errors, 0 warnings
Query:
CREATE function fnc_credit_custstatus returns varchar(6) deterministic
begin DECLARE custstatus VARCHAR(6); if CustCredit>='1000...
Error Code: 1064
You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'varchar(6) deterministic
begin
DECLARE custstatus VARCHAR(6);
if CustCredit>=' at line 2
Try remove comma
DELIMITER //
CREATE FUNCTION fnc_credit_custstatus
RETURNS VARCHAR(6) DETERMINISTIC
BEGIN
DECLARE custstatus VARCHAR(6);
IF CustCredit>=1000 THEN SET custstatus='VIP';
ELSEIF CustCredit<1000 THEN SET custstatus='NONVIP';
END IF;
RETURN (custstatus);
END//
DELIMITER ;
(and use proper comparision data type)
I'm using MySql57
What's wrong with this script?(I'm Mysql newbie)
Error Code: 1064. You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '= 'A0001'; ELSE BEGIN gubun1 = LEFT(cur_max,0,1); gu' at line 10
DELIMITER $$
CREATE FUNCTION narae.FN_GET_GUBUN_MAX() RETURNS varchar(100)
BEGIN
DECLARE cur_max varchar(100);
DECLARE gubun1 varchar(1);
DECLARE gubun2 varchar(100);
DECLARE RTN_VAL varchar(100);
SELECT IFNULL(MAX(gubun_code),'A0001') INTO cur_max from gubun_code;
IF cur_max = 'A0001' THEN RTN_VAL = 'A0001';
ELSE
BEGIN
gubun1 = LEFT(cur_max,0,1);
gubun2 =
LPAD(CONVERT(CONVERT(RIGHT(cur_max,4),UNSIGNED)+1,CHAR),4,'0');
RTN_VAL = CONCAT(gubun1,gubun2);
END
RETURN RTN_VAL;
END $$
DELIMITER ;
There are several errors in the function. I think this might work:
DELIMITER $$
CREATE FUNCTION narae.FN_GET_GUBUN_MAX() RETURNS varchar(100)
BEGIN
DECLARE v_cur_max varchar(100);
DECLARE v_RTN_VAL varchar(100);
SELECT COALESCE(MAX(gubun_code), 'A0001')
INTO v_cur_max
FROM gubun_code;
IF cur_max = 'A0001' THEN
SET v_RTN_VAL = 'A0001';
ELSE
SET v_RTN_VAL = CONCAT(LEFT(cur_max, 1), RIGHT(cur_max, 4) + 1);
END IF;
RETURN v_RTN_VAL;
END $$
DELIMITER ;
I would further simplify this by doing all the logic in the SQL statement, but this seems to be in the spirit of your solution.
i'm using MySql Workbench and im unable to figure out this.
delimiter $$
CREATE function `klientu_copy`()
DECLARE v_laiks TIMESTAMP;
DECLARE v_liet VARCHAR(200);
set v_laiks = now();
set v_liet = current_user;
if (TG_OP = 'DELETE') THEN
insert into kopija_klienti values (v_liet,v_laiks,old.Vards,old.Uzvards,null,null);
ELSEif (TG_OP = 'INSERT') THEN
insert into kopija_klienti values (v_liet,v_laiks,null,null,new.Vards,new.Uzvards);
ELSEif (TG_OP='UPDATE') THEN
insert into kopija_klienti values (v_liet,v_laiks,old.Vards,old.Uzvards,new.Vards,new.Uzvards);
end if;
END; $$
delimiter ;
21:24:22 Error Code: 1064. You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near ''klientu_copy' () BEGIN DECLARE v_laiks timestamp; DECLARE v_liet varchar; s' at line 1 0.000 sec
Did try set #variable / declare #variable, cant figure this out. I'm still learning :)
You must specify the length of the varchar variable, like varchar(100)
Also add the closing ( for the first insert.
this is my trigger
CREATE TRIGGER `proximo_pago` BEFORE INSERT ON `pago`
FOR EACH ROW BEGIN
declare num_orden integer;
select max(orden) from pago where lote=NEW.lote into num_orden;
if(num_orden is NULL)
then
set NEW.orden=1;
else
set NEW.orden=num_orden+1;
end if;
END
and the ERROR
SQL query:
CREATE TRIGGER `proximo_pago` BEFORE INSERT ON `pago`
FOR EACH ROW BEGIN
declare num_orden integer;
MySQL said: Documentation
1064 - You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '' at line 3
I've tried to use DELIMITER but it isn´t works, please help me , thanks
My answer is based only on the necessity of your question which is declaration of the variable.. if the Delimiter doesn't do the trick maybe its an error in your syntax because you didn't SET your SELECT query in a variable. try this first.
DELIMITER $$
CREATE
TRIGGER `proximo_pago` BEFORE INSERT
on `pago`
FOR EACH ROW
BEGIN
DECLARE num_orden int;
SET num_orden = select max(orden) from pago where lote=NEW.lote;
if(num_orden is NULL)
then
set NEW.orden=1;
else
set NEW.orden=num_orden+1;
end if;
END$$
DELIMITER ;
I am trying to create a function that returns rowcount. But it returns error again and again.
1064 - You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '' at line 11
DELIMITER $$
CREATE FUNCTION func1(userid INT)
RETURNS INT
NOT DETERMINISTIC
BEGIN
DECLARE var_name INT;
SET var_name = 0;
SELECT COUNT(*) INTO var_name
FROM wps_bal
WHERE u_id = userid;
RETURN var_name;
END$$
Most probably your version of PHPMyAdmin does not support the DELIMITER statement which is not MySQL statement. Here you can find how to create the function in PHPMyAdmin: Store procedures in phpMyAdmin
Yes. This was helpfull
I have created the solution:
DELIMITER $$
CREATE FUNCTION func1(userid INT)
RETURNS INT
NOT DETERMINISTIC
BEGIN
DECLARE var_name INT;
SET var_name = 0;
SELECT COUNT(*) INTO var_name
FROM wps_bal
WHERE u_id = userid;
RETURN var_name;
END$$
DELIMITER ;