When POSTing to https://developer.api.autodesk.com/viewingservice/v1/register I sometiems receive the following error:
{
Diagnostic: The request is rejected as it conflicts with a previous request that is in-progress.,
registerKeys: {},
Result: Conflict
}
How can I find out which job is already in progress so that I can track its progress and get its result?
First, this is the old API, you need to consider using the ModelDerivtive API instead (ie https://developer.autodesk.com/en/docs/model-derivative/v2)
Like Xiaodond said there is no API to collect all jobs currently processing on your account. You need to request each URN manifest to determine how many jobs runs on this model as know you can translate to SVF, but also export to other formats such as obj, stl, ... when it is possible. Manifest end point and documentation here - https://developer.autodesk.com/en/docs/model-derivative/v2/reference/http/urn-manifest-GET/
Last, we are working on a webhook solution which will be a better solution as a Webhook will call you back when a job is starting and completes. Webhooks aren't yet available at the time of this post, but you should be notified via the developer newsletter when it will be on production.
Hope that helps,
Related
I am trying to learn how to use the ChainlinkClient and I am using their example as well as one for the API that I am trying to uses.
You can see them here on this Gist.
The two contracts in the Gist are deployed on Rinkenby here:
APIConsumner.sol
APIConsumner2.sol
When I call the requestData() method on both contracts they seems to work, the transactions goes through and Link gets taken from the contracts, I am however unable to determine whether the actual data I am requesting from the external APIs gets returned, either by looking in the transaction event or trying to access the value that I am setting.
I am a bit bamboozled at this point, any guidance or suggestions would be greatly appreciated.
Thanks for the flag. The node that was hosting this is deprecated, the article has been updated, and the docs have the latest example.
Please use:
oracle = 0xc57B33452b4F7BB189bB5AfaE9cc4aBa1f7a4FD8;
jobId = "d5270d1c311941d0b08bead21fea7747";
I am using the Forge .NET SDK. To clear all appbundles and activities under my Forge App account I call :
await _designAutomation.DeleteForgeAppAsync("me");
Right afterwards I need to (re)create a new nickname for my Forge App then (re)create the needed AppBundle and Activity :
await _designAutomation.ForgeAppsApi.CreateNicknameAsync("me", new NicknameRecord { Nickname = NICKNAME });
await EnsureAppBundle();
await EnsureActivity();
Quite often one of three calls above fails because the Forge App is still being deleted, so for instance there is a conflict for the nickname creation, or the AppBundle/Activity cannot be created.
The Forge documentation at https://forge.autodesk.com/en/docs/design-automation/v3/reference/http/forgeapps-id-DELETE/ says : This may take up to 2 minutes. During this time the app will not be able to make successful requests.
Would not the asynchronous call to DeleteForgeAppAsync have to wait for the deletion to be complete ?
Thanks for your help.
Maxime
You could handle this scenario by doing retries on 409 response following a forge app deletion.
If you want to add more logic around 409 retries you could always also inspect the body.
Per documentation here you’d need to wait a few for the delete action to take effect despite the SDK API appears to be synchronous:
This may take up to 2 minutes. During this time the app will not be able to make successful requests.
I'm setting up an automated system to convert and visualise 3D models through the Forge APIs. The actual conversion and visualisation is pretty straight forward, but keeping track of the process is not as simple.
Autodesk recommends using webhooks, but documentation of this is quite sparse.
My main problem is that I'm unable to debug the webhooks. I get no indication to weather a hook has been posted or not.
I've read all of the similar questions here on stack overflow, in the FAQ and in the documentation (among others: Why is webhook workflow not taken into consideration when creating modelderivative job?).
I'm processing a conversion for a model with 'modelId'. And want to listen to the events 'extraction.updated'.
I'm registering a hook with a POST like this:
{
"callbackUrl":"https://my-service.com/callbacks/modelId",
"scope":{
"workflow":"modelId"
}
}
My job is registered like this:
{
"input":{
"urn":"{theUrnForTheModel}"
},
"output":{
"formats":[
{
"type":"svf",
"views":[
"3d",
"2d"
]
}
]
},
"misc":{
"workflow":"modelId"
}
}
From what I can see the hooks never fire. I don't get any errors or indications that something fail on my server.
Am I required to post hookAttribute when creating the hook? This is documented as not mandatory. Am I required to have a fixes endpoint on my end, or is it ok to include the specific model id in the url?
A few points to check:
What's the response on POST hook? Should return 201
Which verb does your /callbacks/modelId accepts? Should accept POST
Have you tried extraction.finished event?
I have been reading the documentation for last 2 days. I'm new to feathersjs.
First issue: any link related to feathersjs is not accessible. Such as this.
Giving the following error:
This page isn’t working
legacy.docs.feathersjs.com redirected you too many times.
Hence I'm unable to traceback to similar types or any types of previously asked threads.
Second issue: It's a great framework to start with Real-time applications. But not all real time application just require alone DB access, their might be access required to something like Amazon S3, Microsoft Azure etc. In my case it's the same and it's more like problem with setting up routes.
I have executed the following commands:
feathers generate app
feathers generate service (service name: upload, REST, DB: Mongoose)
feathers generate authentication (username and password)
I have the setup with me, ready but how do I add another custom service?
The granularity of the service starts in the following way (Use case only for upload):
Conventional way of doing it >> router.post('/upload', (req, res, next) =>{});
Assume, I'm sending a file using data form, and some extra param like { storage: "s3"} in the req.
Postman --> POST (Only) to /upload ---> Process request (isStorageExistsInRequest?) --> Then perform the actual upload respectively to the specific Storage in Req and log the details in local db as well --> Send Response (Success or Failure)
Another thread on stack overflow where you have answered with this:
app.use('/Category/ExclusiveContents/:categoryId', {
create(data, params) {
// do complex stuff here
params.categoryId // the id of the category
data // -> additional data from the POST request
}
});
The solution can viewed in this way as well, since featherjs supports micro service approach, It would be great to have sub-routes like:
/upload_s3 -- uploads to s3
/upload_azure -- uploads to azure and so on.
/upload -- main route which is exposed to users. User requests, process request, call the respective sub-route. (Authentication and Auth to be included as well)
How to solve these types of problems using existing setup of feathersjs?
1) This is a deployment issue, Netlify is looking into it. The current documentation is not on the legacy domain though, what you are looking for can be found at docs.feathersjs.com/api/databases/querying.html.
2) A custom service can be added by running feathers generate service and choosing the custom service option. The functionality can then be implemented in src/services/<service-name>/<service-name>.class.js according to the service interface. For file uploads, an example on how to customize the parameters for feathers-blob (which is used in the file uploading guide) can be found in this issue.
Good Evening!
I've been looking into the possibility of using GAS(Google Apps Script) to host a small bit of javascript that lets me use the new Google finance apps api. The intention being that I'll be using the stock information for a project which involves the use of stock data. I know that there are a few ways to get stock information from Google, but the data that the finanace app returns is more in-line with other sources we are using. (One constraint on this project is that we have multiple sources).
I've written the javascript and I can call a httpc:request to the URL for the script given to me from Google. In the browser the JS returns the json object as I want it, however when the call is made from Erlang I'm getting it in a list of ascii. From checking the values it appears to be a document starting like:
Below is the javascript and the url to see the json:
https://script.google.com/macros/s/AKfycbzEvuuQl4jkrbPCz7hf9Zv4nvIOzqAkBxL1ixslLBxmSEhksQM/exec
function doGet() {
var stock = FinanceApp.getStockInfo('LON:TSCO');
return ContentService.createTextOutput(JSON.stringify(stock))
.setMimeType(ContentService.MimeType.JSON);
}
For the erlang, it's a simple request but I've not been doing erlang long, so perhaps I've messed something up here (The URL being the one mentioned above). I've got crypto / ssl / inets when I'm testing this on the command line.
{ok, {Version, Headers, Body}} = httpc:request(get, URL, []}, [], []).
I think it's also worth mentioning that when i curl it from Cygwin, I get a massive load of HTML also, I've included it below, but if you see it you'll thank me for not posting it in here! http://pastebin.com/UtJHXjRm
I've been updating the script as I go with the new versions but I'm at a bit of a loss as to why it's not returning correctly.
If anyone can give me any pointers I'd be very grateful! I get the feeling that it's not intended to be used this way, perhaps only within other Google products and such.
Cheers!
It would be necessary to review how are you deploying the Web App, specifically the Who has access to the app, to access without authentication should be configured as shown in the image:
See Deploying Your Script as a Web App from the documentation.
In my test, by running:
curl -L https://script.google.com/macros/s/************/exec
Get the following result:
{
"priceopen":358,
"change":2.199981689453125,
"high52":388.04998779296875,
"tradetime":"2013-10-11T15:35:18.000Z",
"currency":"GBX",
"timezone":"Europe/London",
"low52":307,
"quote":357.8999938964844,
"name":"Tesco PLC",
"exchange":"LON",
"marketcap":28929273763,
"symbol":"TSCO",
"volumedelay":0,
"shares":8083060703,
"pe":23.4719295501709,
"eps":0.15248000621795654,
"price":357.8999938964844,
"has_stock_data":true,
"volumeavg":14196534,
"volume":8885809,
"changepct":0.6184935569763184,
"high":359.5,
"datadelay":0,
"low":355.8999938964844,
"closeyest":355.70001220703125
}
Possibly your GET is not following the REDIRECT that happens when you use contentService. Look at the html returned there is a redirect in there.