I'm using a web page to show neo4j server in a framework. I want to know how to disable the two welcome messages from opening when this page is loaded or when neo4j is logged in. the screenshot is below.
By default the initial command that runs when you open Neo4j Browser is :play start which shows the "welcome message" guide. You can configure this initial command by clicking on the settings icon and changing the setting Initial Command. If you leave this field blank then no browser guide will play on startup.
You can remove an answer pane by clicking on the "X" button on its top right hand corner.
Related
I just upgraded to PhpStorm 2017.1 and noticed that when I do a directory search using the project explorer on the left hand side of the screen, the results now appear as a pop-up modal.
There is an option to get the results to appear as the bottom panel (like in previous versions) on the modal, but I would like it to do that by default.
How do I get the old behavior back?
To have Enter work as Ctrl+Enter, please vote for IDEA-169996.
Note that you can switch to the old dialog by deselecting ide.find.as.popup in Registry: Help | Find action, type Registry to locate it, find the option there and deselect the checkbox
At my new job I have to work with PhpStorm. I come from Sublime Text, and what bothers me most about PhpStorm is the lack of a single click preview of the files. In stead, it opens the files for editing and adds them to active tab, leaving me with A LOT of useless tabs.
I searched here on StackOverflow and Google, but I seem to be the only one who is annoyed by this. In Sublime it goes to edit mode only after a double click. Is there a setting or plugin to have it like in Sublime?
It's a native feature these days:
Settings... / Editor / General / Editor Tabs / Opening Policy > check "Enable preview tab"
on version PhpStorm 2022.3.2
Single Click To Open File
By default to open a file in phpstorm you have to double click it. I found this to be very annoying. Luckily you can change this to be a single click.
Steps:
Click the gear icon.
Make sure 'Autoscroll to Source' is checked
Make sure 'Autoscroll from Sourcce' is checked
http://www.ryanwright.me/cookbook/phpstorm/single-click-open-file
There is no such functionality currently available. I may only suggest to use View | Quick Definition to preview files.
Other than that: https://youtrack.jetbrains.com/issue/IDEA-130918 -- watch this ticket (star/vote/comment) to get notified on progress.
Welcome in late 2019 - we got a plugin for this now:
Plugin: https://plugins.jetbrains.com/plugin/12778-quick-file-preview
Plugin Source: https://github.com/SeeSharpSoft/intellij-file-preview
IntelliJ Issue: https://youtrack.jetbrains.com/issue/IDEA-130918
Don't forget to disable the "Autoscroll to Source" Feature, to get the full advantage of the plugin!
The closest you'll get right now is to enable 'Scroll To Source', however this will actually open the file in another tab, it will not be a preview.
Open the Project, Favorites, etc. side bar (cmd + 1 or ctrl + 1)
Click the gear in the top right
Select 'Scroll to Source'
Note 'Scroll to Source' can be enabled at the same as 'Scroll from Source', just make sure if you click on one file you wait until the sidebar catches up to click another, otherwise the sidebar will autoscroll back and forth between the two. You'll have to click one of them to break that loop.
Read more on JetBrains' website
This is now available as a native feature in the latest version: 2020.3!
See this comment on the YouTrack link someone posted above https://youtrack.jetbrains.com/issue/IDEA-130918#focus=Comments-27-4500169.0-0
Also on the 2020.3 feature list under User Experience there's a mention of "preview tab" here https://blog.jetbrains.com/idea/2020/12/intellij-idea-2020-3/
I'm developing apps in Android Studio. But everytime I hit Run button, the Run tab pops up automatically from bottom with messages like Installing com.packagename etc..., Success, Launching
I've already disabled automatic displayin of Android DDMS tab (because I use DDMS from toolbar which opens new window) by editing configurations. But I can't disable this stupid automatic Run tab showing.
Is there any way to do this ?
There is no standard way of achieving this but I found an interesting workaround mentioned below and using the same.
When your run tab is opened, Instead of hiding it using right-top corner button, Drag it till it hides.
Like in picture shown below
Now Run your project run window wont appear, When you want it back click on run button in horizontal bar.
Working perfectly for me .
In case anyone still struggling with this annoying thing, there is a way to disable this annoying popup.
Note: this will remove the run tab altogether.
So basically go to your Run/Debug configuration and Uncheck Activate tool window at the bottom.
This gets rid of the Run tab.
When I run my project in Netbeans 6.8, it loves to open the index page automatically. It's annoying because I always keep a tab with the page I'm working on when I work, so I don't need this index page. It also makes my current page lose focus.
I have tried not specifying an index or my project URL, but then I can't run or save my project.
How can I prevent it from doing so?
In NetBeans 7.4:
Right-click your project, select 'Properties'
In left hand pane of popup, select 'Run Configuration'
In the right pane of the popup, in the bottom right corner of the list of fields, click 'Advanced...'
Select radio button 'Do Not Open Web Browser'
I ran into that issue as well. The solution is quite simple - go to the menu bar:
Run/Run File.
That's it. It will just run the current php script without going to the index.php.
Basically, you want to reopen the same page (refresh it ?) in the browser ? You can set settings in the project properties > run configuration, then chaange the index file or project url. But apart from that I am afraid that you can't do anything to prevent opening a new window on run. When you click 'run', netbeans says to your OS : "Hey, let's open that page (your_project_URL/index_file) now". The OS thinks and execute a command like "default_browser url", where the argument "url" is here your_project_URL/index_file. Then the browser thinks it's a new page to open, and BAM, opens a new page.
Just use shift+F6 which will open the current page with focus.
I am using Microsoft Access 2007 to move and massage some data between two SQL Servers. Yesterday everything was working correctly, I was able to run queries, update data, and delete data.
Today I opened up the Access database to finish my data migration and am now receiving the following message when I try to run some update queries:
The action or event has been blocked
by Disabled Mode.
Any ideas what this is talking about?
Try and see if this works:
Click on 'External Data' tab
There should be a Security Warning that states "Certain content in the database has been disabled"
Click the 'Options' button
Select 'Enable this content' and click the OK button
I solved this with Access options.
Go to the Office Button --> Access Options --> Trust Center --> Trust Center Settings Button --> Message Bar
In the right hand pane I selected the radio button "Show the message bar in all applications when content has been blocked."
Closed Access, reopened the database and got the warning for blocked content again.
No. Go to database tools (for 2007) and click checkmark on the Message Bar. Then, after the message bar apears, click on Options, and then Enable. Hope this helps.
Dimitri
From access help:
Stop Disabled Mode from blocking a query
If you try to run an append query and it seems like nothing happens, check the Access status bar for the following message:
This action or event has been blocked by Disabled Mode.
To stop Disabled Mode from blocking the query, you must enable the database content. You use the Options button in the Message Bar to enable the query.
Enable the append query
In the Message Bar, click Options.
In the Microsoft Office Security Options dialog box, click Enable this content, and then click OK.
If you don't see the Message Bar, it may be hidden. You can show it, unless it has also been disabled. If the Message Bar has been disabled, you can enable it.
Show the Message Bar
If the Message Bar is already visible, you can skip this step.
On the Database Tools tab, in the Show/Hide group, select the Message Bar check box.
If the Message Bar check box is disabled, you will have to enable it.
Enable the Message Bar
If the Message Bar check box is enabled, you can skip this step.
Click the Microsoft Office Button , and then click Access Options.
In the left pane of the Access Options dialog box, click Trust Center.
In the right pane, under Microsoft Office Access Trust Center, click Trust Center Settings.
In the left pane of the Trust Center dialog box, click Message Bar.
In the right pane, click Show the Message Bar in all applications when content has been blocked, and then click OK.
Close and reopen the database to apply the changed setting.
Note When you enable the append query, you also enable all other database content.
For more information about Access security, see the article Help secure an Access 2007 database.
On the ribbon,Go to Database Tools
under "Show/Hide", make sure the Message bar is checked (turned on)
Then click on the gray message bar, click database options.
From there you can modify your security options. Just enable these types of content.
You should be good to go after this.
You may wish to consider self-certifying your projects:
Self-certification, digital certificate, digital signatures
Another issue is that your database may be in a "non-trusted" location. Go to the trust center settings and add your database location to the trusted locations list.