My local file and mercurial revision are at different stages however hg pull & hg update default returns a no changes message.
On bitbucket my repo and revision I am trying to pull to local machine is https://bitbucket.org/sayth/pyxml/src/c63b5ce2119ae64331ee2551fc19083315be0571/xrace.py
[sayth#localhost pyXML]$ hg pull && hg update default
pulling from https://bitbucket.org/sayth/pyxml
searching for changes
no changes found
0 files updated, 0 files merged, 0 files removed, 0 files unresolved
At bitbucket at latest revision you can see just in the imports alone they are different.
Bitbucket
# from lxml import etree
from lxml import objectify
import argparse
import os
local machine
from pyquery import PyQuery as pq
# import pandas as pd
# import psycopg2
import argparse
import os
# from datetime import datetime
Even trying pulling by revision number but it wont update.
[sayth#localhost pyXML]$ hg pull -r c63b5ce
pulling from https://bitbucket.org/sayth/pyxml
no changes found
Your clone is a full copy of the remote repository with all the revisions in it.
When you pull you're checking the remote repo for any new revisions and copying them to your local clone, but it does not change the files that you are currently editing.
update changes your working copy, i.e. the files you are currently editing to whatever revision you choose.
If you just do hg update without specifying a revision it will update to whatever it thinks is the current tip of the repo.
If you do hg update -r c63b5ce2119a it will update your working copy to the specified revision and that will change the files you are currently editing.
Related
I have accidentally run hg strip, and deleted a stack of commits. I have not done anything in the repo since. Is there a way for me to bring back this stack of commits, to undo the hg strip I just ran?
As long as you didn't run the strip with the --no-backup option, the stripped changesets can be found in the repository under .hg\strip-backup. If you sort the directory content by date the latest one is likely the one you need to restore. Restore it with hg unbundle <filename>.
It is possible to hg pull from a strip backup file as an alternative to using hg unbundle.
As noted in a comment on another answer to this question, hg unbundle has fewer options and only works with bundles, but can unbundle more than one bundle at a time. Whereas hg pull can pull from a single source (share/web/bundle) and has other options.
Here's an example of using hg pull based on an external post by Isaac Jurado:
Usually the backup is placed in REPO/.hg/strip-backup/. See the
example below:
$ hg glog
# changeset: 2:d9f98bd00d5b tip
| three
o changeset: 1:e1634a4bde50
| two
o changeset: 0:eb14457d75fa
one
$ hg strip 1
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
saved backup bundle to
/Users/hchapman/ttt/.hg/strip-backup/e1634a4bde50-backup.hg
And then, what one would do to recover those changesets would be:
$ hg pull $(hg root)/.hg/strip-backup/e1634a4bde50-backup.hg
Here is a worked example of unbundle from an external post. I've cleaned it up slightly to make it a little more general:
Recovering stripped files when using Mercurial
If you accidentally strip a patch and do not have a backup for it, you
can still recover your files using Mercurial. To recover your files:
Open a Microsoft Windows Command Prompt window.
Navigate to the project folder where you stripped the files.
Run the dir command
Navigate to the .hg folder where Mercurial stores all relevant project
files.
Run the dir command again.
Navigate to the strip-backup folder where Mercurial stores the backup
bundles of stripped patches.
Run the dir command again. Multiple files display in the directory
that use the <hash>-hg format. They are the backup bundles of stripped
patches.
Use Windows Explorer to find the required file. Open the strip-backup
folder in Windows Explorer, and sort by Date modified descending.
Unless the necessary backup bundle is already known, [it is recommended to]
restore the bundles in reverse chronological order starting
from the most recent bundle.
Navigate back to the project folder.
To restore a bundle, run hg unbundle .hg\strip-backup\<bundle_file_name>. ... You may want to add it to the
PATH environment variable to make it accessible globally.
Synchronize the project [using hg pull] to see the restored patch. If
the restored patch is not the one needed, then continue restoring the
patches in reverse chronological order until the required patch is
retrieved.
Note: You may restore the backup bundles in any order, instead of
using reverse chronological order. However, it may not be safe to do
so. You may end up attempting to restore a backup bundle, which has a
dependency on another backup bundle that has not been restored. In
this case, you will get an error.
I have read only permission to an hg repo and am trying to develop and test changes to it locally. The problem is that I am in the middle of changing dev machines and am caught in a weird/akward state across the two machines.
On my old machine I made lots of changes to the repo, locslly. I just cloned the repo on my new machine, but obviously that doesn't contain the changes from my old machine. I need a way to createe a patch/diff from my local working copy on my old machine, and then apply them to my local working copy on my new machine. The problem is that I already commited (hg commit -m "Blah") the changes on my old machine to the distributed repo on it.
What set of specific commands can I use to create a patch/diff of my old machine and then apply it to the repo on my new one?
Update
I commited all changes on my old machine and then ran hg serve, exposing http://mymachine.example.com:8000.
On my new machine, where I had made some different changes (locally) than the changes from my old machine, I ran hg pull http://mymachine.example.com:8000 and got:
myuser#mymachine:~/sandbox/eclipse/workspace/myapp$ hg pull http://mymachine.example.com:8000
pulling from http://mymachine.example.com:8000/
searching for changes
adding changesets
adding manifests
adding file changes
added 2 changesets with 16 changes to 10 files (+1 heads)
(run 'hg heads' to see heads, 'hg merge' to merge)
So I run hg merge:
myuser#mymachine:~/sandbox/eclipse/workspace/myapp$ hg merge
abort: uncommitted changes
(use 'hg status' to list changes)
What do I do now?!?
You can use:
$ hg diff > changes.patch
To create a patch file, then:
$ patch -p1 < changes.patch
To apply that patch file on your new machine.
Well, that's actually fantastic, mercurial is a distributed version control system and you do not need to go via any patch file at all: simply pull the changes from your old machine to your new machine:
hg pull URL
where URL can be any network URL or also ssh-login, e.g.
hg pull ssh://mylogin#old.maschine.box or hg pull path/to/old/repository/on/nfs/mount
`
Alternatively you can also use bundle and unbundle. They create bundles which can be imported in the new mercurial easily and keep all meta-information.
hg bundle -r XXX --base YYY > FILENAME
where YYY is a revision you know you have in your new repository. You import it into your new repo with hg unbundle FILENAME. Of course you can bundle several changesets at once by repeating the -r argument or giving a changeset range like -r X:Y.
The least comfortable method is a via diff or export:
hg export -r XXX > FILENAME or equivalent hg diff -c XXX > FILENAME where you need to import the result with patch -p1 < FILENAME or hg import FILENAME.
The easiest way is to do this is to ensure that all work on your old machine is committed. Then use this command on it from the base of your repo:
hg serve
which creates a simple http server on this repo. The monitor should state the name of the http URL it is serving.
On your new machine, just pull from that URL.
Once you've pulled your old changes you can stop the hg serve process with ^C.
The advantages of this method are that it is very quick, and that it works on just about any system. The ssh method is also quick, but it won't work unless your system is configured to use ssh.
Answer to Update
The OPs update is asking an orthogonal question about how to merge changes pulled from a server with local changes. If you haven't already done so, try to digest the information in this merge doc and this one.
Merging is for merging changesets. The error is happening because you have local changes that haven't been committed which mercurial can't merge. So the first thing to do is to commit your local changes, then you will be able to merge.
But before you merge, I strongly recommend that you are merging what you think you are merging. Either ensure there are only 2 heads, or specify which head you are merging with. When merging, you have to be at one of the heads you wish to merge; it's usually better to be at the head with the most changes since the common ancestor because the diffs are simpler.
After you've merged, don't forget to commit the merge. :-)
Every once in a while as I'm working on a local change, I'll realize that I want to undo the change made in a previous revision from a particular file while I'm in the middle of a set of changes. For example:
r1000 - Changes files A and B
... - any number of intermediate changes
working copy: Outstanding changes to several files
At this point, I realize that I want to completely undo the changes to file A in r1000 as a part of the changes I'm working on.
If I didn't have any local changes, I could use hg backout. I've tried using hg revert -r "1000^" A, but I get a message about A not being affected by the parent changeset of 1000.
So what's the best way to revert the change from a single file in a previous changeset as a part of my current change?
So as I was writing this up, I ran across the --reverse flag on the hg diff command. Combining that idea with hg import for the example in the question gives a command like:
hg diff -c 1000 -I A --reverse | hg import --no-commit --force -
This creates a reversed patch of the change in r1000 for the single targeted file, then passes that to hg import to be applied to the current working directory without committing.
I would like to arrange my last commits as an MQ patch. All the commits are local (never pushed to the server), but not all the local commits are to be converted.
Say, I did 10 commits (never pushed) and now I wish to convert the last 5 to a patch.
How do I do it?
Short version:
$ hg qimport -r "-5:"
Long version:
$ hg qimport -r "last(all(), 5)"
You can import changesets via hg qimport if you've already got an MQ repository initialised (via hg qinit. The command only accepts one patch at a time, so to import your last five changesets, you'd need to run the command five times and specify the revision to import via the --rev XXX parameter.
If your using TortoiseHG, you can import patches from within the TortoiseHG Workbench by right-clicking the changeset to import, then selecting Modify History -> Import to MQ.
I have come across a problem that I "think" can only be resolved using patches.
I cloned a project from our main repository, made quite a few changes (updates, deletion of files & directory and additions) to it. These changes are not even committed. The problem is, project from the main repository has been deleted/removed and recreated as a new project (name is same, all the directory structures everything is same as before). I cloned that project again from the main repository and would like to transfer all my uncommitted changes to it.
I am still exploring the hg patch to resolve that. It would be helpful if someone could confirm that creating and adding a patch IS the right approach to this, any resources explaining the process would be of great help.
You're correct — a patch is what you need to transfer the information from one repository to another (unrelated) repository. This will work since the files are the same, as you note.
So, to transfer your uncommitted changes from your old clone, you do
$ hg diff -g > uncommited.patch
$ cd ../new
$ hg import --no-commit ../old/uncomitted.patch
That will restore the information saved in the patch. This includes information about files that are added or renamed in the old clone.
The following steps can be performed with a standard Mercurial install:
Commit the changes in your local repository. Note the revision number.
Use "hg export -r REV >patch.diff" to create a patch.
Clone the new repository.
Use "hg import patch.diff" to apply the patch to the new repository.
Example
C:\>hg init example
C:\>cd example
C:\example>echo >file1
C:\example>hg ci -Am file1
adding file1
C:\example>hg clone . ..\example2
updating to branch default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
C:\example>rd /s/q .hg
C:\example>hg init
C:\example>hg ci -Am same-but-different
adding file1
At this point example and example2 have identical contents, but the repositories are unrelated to each other due to deleting and reinitializing the .hg folder.
Now make some changes and commit them in one of the repositories, then export them as a patch:
C:\example>echo >>file1
C:\example>echo >file2
C:\example>hg ci -Am changes
adding file2
C:\example>hg export -r 1 >patch.diff
Below shows that the other repository can't pull the changes, because of the reinitialization. It can, however, apply the patch successfully:
C:\example>cd ..\example2
C:\example2>hg pull
pulling from c:\example
searching for changes
abort: repository is unrelated
C:\example2>hg import ..\example\patch.diff
applying ..\example\patch.diff
I would first make copies of everything so you have a way of backtracking.
Then, in the working copy with the changes, I would first delete the .hg directory, then copy in the .hg directory from the new repo. This basically transfers all of the changed files into the new repo without the need to delete any files and directories.
You will still need to tell the repo about whether to remove any files marked as missing. You will also have to handle renames manually. If this is a small number of operations, it's easier than trying to use the patch method.
Once this is done, commit your changes and push, if necessary.
seems like what you want is patch queues. In that you have uncommitted changes, and you want to pull from the new repo before committing them....
$ hg qinit -c # initialize mq for your repo containing the uncommitted changes
$ hg qnew name_of_patch # create patch that contains your uncommitted changes
$ hg qpop # resets your working dir back to the parent changeset
no worries though, your changes are safe and sound in .hg/patches/name_of_patch to see for yourself.....
$ cat .hg/patches/name_of_patch
now pull in the new repo
$ hg pull -u http://location.of.new/repo # pull in changes from new repo update working dir
$ hg qpush # apply your uncommitted changes to new repo
If you are lucky you will have no merge conflicts and you can go ahead and commit the patch by....
$ hg qfinish -a # change all applied patches to changeset
And then if you want....
$ hg push http://location.of.new/repo
If the repos are unrelated, just init a patch repo on your new repo. and manually copy the patch in and add it to .hg/patches/series file.
assuming patch was created. clone new repo
$ hg clone http://location.of.new/repo ./new_repo
init patch repo
$ cd ./new_repo && hg qinit -c
copy patch
$ cp ../old_repo/.hg/patches/name_of_patch .hg/patches/
edit series file using an editor of some sort
$ your_favorite_editor .hg/patches/series
name_of_patch # <---put this in the series file
apply your patch to new repo
$ hg qpush
if no merge conflicts and you are convinced it works
$ hg qfinish -a
If the layout is the same, you can just copy all the files over (excluding .hg) and then use hg addrem.
Try to look into the MQ plugin, it does exactly this if I recall. I've never had a use for that though, so I can't say.
If the old repository was simply moved/cloned to a new URL then you could simply change the remote repository you talk to the new one.
If, however, it was recreated from the ground up (even with the same structure) then I don't believe Mercurial has any built-in functionality to help you here. Mercurial patches reference specific changesets which won't exist in your new repository.
You could use a merge tool to perform the diff and bring across any changes you made.
Edited To answer the question in the comment:
When you clone the repository you are taking a complete snapshot of the entire change history - along with the associated change-set IDs, etc.
Mercurial tracks changes by change-sets to the repository, rather than at the file level like Subversion.
If you clone, then you can easily push/merge into another repository that was also cloned from the same source.
If you recreated the repository then the change IDs won't match, and can't be merged in Hg.
The only option in this scenario would be to use a Merge tool which will let you see mismatches in files/folder structure.
Also: Worth pointing out http://hginit.com/ because it explains (indirectly) some of this.