I am new to linux and i have few expect scripts to execute. I read few blogs on how to install expect and tcl. The command i am trying is
sudo yum install expect
sudo yum install tcl
I am getting
No package expect available
No package tcl available
It seems RHEL should have tcl and expect prebuilt but this is not the case in my version of linux.
How should i proceed from here ?
Help will be highly appreciated..Thanks :)
Install the development tools:
yum groupinstall "Development tools"
then
./configure
make
make install
should be good to go.
Have you tried this? In this way you will be able to compile from source.
1) Download the expect package from the below link
http://sourceforge.net/projects/expect/
2) Install the required dependecy packages "Tcl/Tk" language toolkit
# yum install tcl
3) Install the "expect" package using the below commands
# tar -zxvf expectx.xx.tar.gz
# ./configure
# make
# make install
I tried the following links and it worked for me. http://www.linuxfromscratch.org/blfs/view/svn/general/tcl.html http://www.linuxfromscratch.org/blfs/view/svn/general/expect.html
Try ActiveTcl from ActiveState:
http://downloads.activestate.com/ActiveTcl/releases/8.6.4.1/ActiveTcl8.6.4.1.299124-linux-x86_64-threaded.tar.gz
You can add EPEL Repo
On 32-Bit -
# rpm -Uvh http://epel.mirror.net.in/epel/6/i386/epel-release-6-8.noarch.rpm
On 64-Bit -
# rpm -Uvh http://epel.mirror.net.in/epel/6/x86_64/epel-release-6-8.noarch.rpm
and then you can use yum to install.
Also you can compile from source or get from ActiveState like in previous answers.
Related
Sorry, no QEMU binary has been found. Please make sure QEMU is installed before continuing
I have installed GNS3 on Centos 8, but when I want to create a QEMU vms Machine the program gives me this error.
Installing GNS3 on Fedora family OS's can be tricky; you have to get all the dependencies right. Have you tried:
sudo yum -y install https://dl.fedoraproject.org/pub/epel/epel-release-latest-8.noarch.rpm
sudo yum -y install qemu # Not qemu-kvm
I just tested it using GNS3 on CentOS 7. BTW, I wrote a bash script to install GNS3, if you want some ideas.
I was trying to install rl_json using
teacup install rl_json
But this installer is not present in teacup.
Please suggest to install it.
I am trying to build a .rpm package. I have just followed the steps to do that. Till now all steps were gone fine but now i just stuck with this step. I just ran the following command and got this error:
rpmbuild -ba asterisk.spec
error: Failed build dependencies:
gtk2-devel is needed by asterisk-1.8.12.2-1.fc15.x86_64
libsrtp-devel is needed by asterisk-1.8.12.2-1.fc15.x86_64
[... more ...]
freetds-devel is needed by asterisk-1.8.12.2-1.fc15.x86_64
uw-imap-devel is needed by asterisk-1.8.12.2-1.fc15.x86_64
I am using fedora-15. How to resolve this error?
How I do install all depencencies during installation of src.rpm package. Is it possible?
You can use the yum-builddep command from the yum-utils package to install all the build dependencies for a package.
The arguments can either be paths to spec files, paths to source RPMs or the names of packages which exist as source RPMs in a configured repository, for example:
yum-builddep my-package.spec
or
yum-builddep my-package.src.rpm
The same thing can be achieved on newer versions of Fedora that use dnf as their package manager by making sure that dnf-plugins-core is installed and then doing:
dnf builddep my-package.spec
or
dnf builddep my-package.src.rpm
yum-builddep doesn't seem to work if the mirror you use doesn't serve source RPMs. This may not handle all cases, but it usually works for me:
sudo yum install -y $(<rpmbuild> | fgrep 'is needed by' | awk '{print $1}')
where <rpmbuild> is your rpmbuild command (e.g., rpmbuild -ba foo.spec).
On PHP building - especially phpbrew I used dnf builddep php, it worked.
I downloaded the tar.gz from qemu.org. Now how can I compile the source code only for i386 architecture?
I mean, my qemu need not be able to emulate a Power PC, Motorola 68000 or others.
I tried the steps
./configure
make
make install
But there was a failure
No rule to build target 'all'
Apart from this, the above steps compile the qemu for all architectures too.
Hope to get some help.
On Linux Machine Download Qemu Source Code and extract in directory then cd to DIR and do following:
./configure --disable-kvm [--prefix=PFX] [--target-list="i386-softmmu x86_64-softmmu"]
make
make install
first tar it (extract it)
then go to the directory on shell
then
type this commands
./configure --target-list=i386-softmmu
when build successful
press make and enter
when this done
then write
sudo make install
that's it
For general linux,
#tar xvzf qemu-1.4.0.tar.bz2
#cd qemu-1.4.0
#./configure --target-list=i386-softmmu
#make
#make install
For puppy linux wary 530,
#tar xvzf qemu-1.4.0.tar.bz2
#cd qemu-1.4.0
#./configure --target-list=i386-softmmu
#make
#new2dir make install
#cd ..
#dir2pet qemu-1.4.0-i486
./configure --target-list=x86_64-linux-user --disable-smartcard-nss
This command work for me, while building Qemu 1.6 on centOS
Does OSX need an install of libmysqlclient15-dev? I'm trying to compile a gem that is failing and a lot of sources says to install "libmysqlclient15-dev" but I only see this for Linux, not OSX. Am I missing something here?
brew install mysql
fixed this for me
I know this is old, but google got me here. So let's say the solution in 2018 for python3 on OSX.
brew install mysql-client
echo 'export PATH="/usr/local/opt/mysql-client/bin:$PATH"' >> ~/.bash_profile
source ~/.bash_profile
pip install mysqlclient
I just had the same problem and only got a partial working solution.
Here are the steps I made to make it work:
brew install mysql-client
brew install mysql-connector-c
IF YOU HAVE ZSH:
echo 'export PATH="/usr/local/opt/mysql-client/bin:$PATH"' >> ~/.zshrc
source ~/.zshrc
ELSE:
echo 'export PATH="/usr/local/opt/mysql-client/bin:$PATH"' >> ~/.bash_profile
source ~/.bash_profile
Now for the installation itself:
LDFLAGS=-L< your openssl lib folder location > pip install mysqlclient==< version >
for example:
LDFLAGS=-L/usr/local/opt/openssl/lib pip install mysqlclient==1.3.12
If you are using the mysql dmg file to install mysql you will need to edit your ~/.bash_profile and include this:
export DYLD_LIBRARY_PATH=/usr/local/mysql/lib:$DYLD_LIBRARY_PATH
brew install mysql
then
arch -x86_64 gem install mysql2 -v 0.5.3 -- --srcdir=/usr/local/mysql/include
Afterwards I was able to run bundle install.
Copied from Bragadeesh Jegannathan's blog post
Yes you will need to install this. For example if you are trying to install the mysql gem you will need the headers for the mysql library. This is because some gems need to compile native extensions, so they need the header files for any 3rd party libraries that the extensions uses.
On Mac OS X I recommend using MacPorts to manage the installation of these libraries/headers.
Those instructions are for Debian type Linuxes. The closest thing to Debian for OS X is Fink. After getting that installed and set up, you can say fink install mysql-unified-dev to get essentially the same thing as asking for libmysqlclient15-dev on a Debian or Ubuntu type system.
Beware that Fink installs its packages in /sw, and not all build scripts know to look there for libraries and headers. You might have to give custom build options to get it to figure this out.
A path that may be more successful is to simply download the MySQL 5.0 package for Mac OS X. That should include the same development files as libmysqlclient15-dev, and as a bonus will put them in places more likely to be found by your gem.
(Why 5.0, by the way? Because that's what corresponds to ABI version 15, which your package apparently requires. Maybe it will in fact work with 5.1, or 5.4, or 6.0, but that would be a risk you'd have to decide to take on your own.)