Automatically install build dependencies prior to building an RPM package - fedora

I am trying to build a .rpm package. I have just followed the steps to do that. Till now all steps were gone fine but now i just stuck with this step. I just ran the following command and got this error:
rpmbuild -ba asterisk.spec
error: Failed build dependencies:
gtk2-devel is needed by asterisk-1.8.12.2-1.fc15.x86_64
libsrtp-devel is needed by asterisk-1.8.12.2-1.fc15.x86_64
[... more ...]
freetds-devel is needed by asterisk-1.8.12.2-1.fc15.x86_64
uw-imap-devel is needed by asterisk-1.8.12.2-1.fc15.x86_64
I am using fedora-15. How to resolve this error?
How I do install all depencencies during installation of src.rpm package. Is it possible?

You can use the yum-builddep command from the yum-utils package to install all the build dependencies for a package.
The arguments can either be paths to spec files, paths to source RPMs or the names of packages which exist as source RPMs in a configured repository, for example:
yum-builddep my-package.spec
or
yum-builddep my-package.src.rpm
The same thing can be achieved on newer versions of Fedora that use dnf as their package manager by making sure that dnf-plugins-core is installed and then doing:
dnf builddep my-package.spec
or
dnf builddep my-package.src.rpm

yum-builddep doesn't seem to work if the mirror you use doesn't serve source RPMs. This may not handle all cases, but it usually works for me:
sudo yum install -y $(<rpmbuild> | fgrep 'is needed by' | awk '{print $1}')
where <rpmbuild> is your rpmbuild command (e.g., rpmbuild -ba foo.spec).

On PHP building - especially phpbrew I used dnf builddep php, it worked.

Related

Installing MySQL and MySQLWorkbench In Offline Red Hat 7 Machine

I am trying to install mysql workbench on a system without network. I downloaded the mysql-workbench-community, mysql-community-{server, client, common, libs} which were noted in the "Installing RPM Packages" section of MySQL Install Manual. It states that these are the standard rpm packages needed for a basic functional install of mysql community. So with that I downloaded all the rpm packages and attempted to manually install each using:
sudo rpm -ivh mysql-community-package-name.rpm
Unfortunately I keep getting dependency errors. I found this link to obtain all the dependencies for a package. So on my second attempt I ran the following:
Repoquery -R --resolve --recursive mysql-community-server | xargs -r yumdownloader
Which gave me about 100 rpm packages. I transferred them onto my machine and unfortunately more dependencies like mysql-connectors-community and mysql-=tools-community came up which were never documented or mentioned as dependencies with the script.
What am i doing wrong? Is there a way to download all the rpms and bundle them together as a custom RPM in the future? I see ubuntu has a apt-offline command mentioned here. Is there a similar method I can apply for redhat?
Update1:
I have an idea to create a container rhel7 instance, mounting /root/tmpkg and running this example. But is there another way I should consider?

Difficulty installing JSON module for Perl on Mac [duplicate]

I get this error:
Can't locate Foo.pm in #INC
Is there an easier way to install it than downloading, untarring, making, etc?
On Unix:
usually you start cpan in your shell:
$ cpan
and type
install Chocolate::Belgian
or in short form:
cpan Chocolate::Belgian
On Windows:
If you're using ActivePerl on Windows, the PPM (Perl Package Manager) has much of the same functionality as CPAN.pm.
Example:
$ ppm
ppm> search net-smtp
ppm> install Net-SMTP-Multipart
see How do I install Perl modules? in the CPAN FAQ
Many distributions ship a lot of perl modules as packages.
Debian/Ubuntu: apt-cache search 'perl$'
Arch Linux: pacman -Ss '^perl-'
Gentoo: category dev-perl
You should always prefer them as you benefit from automatic (security) updates and the ease of removal. This can be pretty tricky with the cpan tool itself.
For Gentoo there's a nice tool called g-cpan which builds/installs the module from CPAN and creates a Gentoo package (ebuild) for you.
Try App::cpanminus:
# cpanm Chocolate::Belgian
It's great for just getting stuff installed. It provides none of the more complex functionality of CPAN or CPANPLUS, so it's easy to use, provided you know which module you want to install. If you haven't already got cpanminus, just type:
# cpan App::cpanminus
to install it.
It is also possible to install it without using cpan at all. The basic bootstrap procedure is,
curl -L http://cpanmin.us | perl - --sudo App::cpanminus
For more information go to the App::cpanminus page and look at the section on installation.
I note some folks suggesting one run cpan under sudo. That used to be necessary to install into the system directory, but modern versions of the CPAN shell allow you to configure it to use sudo just for installing. This is much safer, since it means that tests don't run as root.
If you have an old CPAN shell, simply install the new cpan ("install CPAN") and when you reload the shell, it should prompt you to configure these new directives.
Nowadays, when I'm on a system with an old CPAN, the first thing I do is update the shell and set it up to do this so I can do most of my cpan work as a normal user.
Also, I'd strongly suggest that Windows users investigate strawberry Perl. This is a version of Perl that comes packaged with a pre-configured CPAN shell as well as a compiler. It also includes some hard-to-compile Perl modules with their external C library dependencies, notably XML::Parser. This means that you can do the same thing as every other Perl user when it comes to installing modules, and things tend to "just work" a lot more often.
If you're on Ubuntu and you want to install the pre-packaged perl module (for example, geo::ipfree) try this:
$ apt-cache search perl geo::ipfree
libgeo-ipfree-perl - A look up country of ip address Perl module
$ sudo apt-get install libgeo-ipfree-perl
A couple of people mentioned the cpan utility, but it's more than just starting a shell. Just give it the modules that you want to install and let it do it's work.
$prompt> cpan Foo::Bar
If you don't give it any arguments it starts the CPAN.pm shell. This works on Unix, Mac, and should be just fine on Windows (especially Strawberry Perl).
There are several other things that you can do with the cpan tool as well. Here's a summary of the current features (which might be newer than the one that comes with CPAN.pm and perl):
-a
Creates the CPAN.pm autobundle with CPAN::Shell->autobundle.
-A module [ module ... ]
Shows the primary maintainers for the specified modules
-C module [ module ... ]
Show the Changes files for the specified modules
-D module [ module ... ]
Show the module details. This prints one line for each out-of-date module (meaning,
modules locally installed but have newer versions on CPAN). Each line has three columns:
module name, local version, and CPAN version.
-L author [ author ... ]
List the modules by the specified authors.
-h
Prints a help message.
-O
Show the out-of-date modules.
-r
Recompiles dynamically loaded modules with CPAN::Shell->recompile.
-v
Print the script version and CPAN.pm version.
sudo perl -MCPAN -e 'install Foo'
Also see Yes, even you can use CPAN. It shows how you can use CPAN without having root or sudo access.
Otto made a good suggestion. This works for Debian too, as well as any other Debian derivative. The missing piece is what to do when apt-cache search doesn't find something.
$ sudo apt-get install dh-make-perl build-essential apt-file
$ sudo apt-file update
Then whenever you have a random module you wish to install:
$ cd ~/some/path
$ dh-make-perl --build --cpan Some::Random::Module
$ sudo dpkg -i libsome-random-module-perl-0.01-1_i386.deb
This will give you a deb package that you can install to get Some::Random::Module. One of the big benefits here is man pages and sample scripts in addition to the module itself will be placed in your distro's location of choice. If the distro ever comes out with an official package for a newer version of Some::Random::Module, it will automatically be installed when you apt-get upgrade.
Already answered and accepted answer - but anyway:
IMHO the easiest way installing CPAN modules (on unix like systems, and have no idea about the wondows) is:
curl -L http://cpanmin.us | perl - --sudo App::cpanminus
The above is installing the "zero configuration CPAN modules installer" called cpanm. (Can take several minutes to install - don't break the process)
and after - simply:
cpanm Foo
cpanm Module::One
cpanm Another::Module
Many times it does happen that cpan install command fails with the message like
"make test had returned bad status, won't install without force"
In that case following is the way to install the module:
perl -MCPAN -e "CPAN::Shell->force(qw(install Foo::Bar));"
Lots of recommendation for CPAN.pm, which is great, but if you're using Perl 5.10 then you've also got access to CPANPLUS.pm which is like CPAN.pm but better.
And, of course, it's available on CPAN for people still using older versions of Perl. Why not try:
$ cpan CPANPLUS
Use cpan command as cpan Modulename
$ cpan HTML::Parser
To install dependencies automatically follow the below
$ perl -MCPAN -e shell
cpan[1]> o conf prerequisites_policy follow
cpan[2]> o conf commit
exit
I prefer App::cpanminus, it installs dependencies automatically. Just do
$ cpanm HTML::Parser
On ubuntu most perl modules are already packaged, so installing is much faster than most other systems which have to compile.
To install Foo::Bar at a commmand prompt for example usually you just do:
sudo apt-get install libfoo-bar-perl
Sadly not all modules follow that naming convention.
On Fedora Linux or Enterprise Linux, yum also tracks perl library dependencies. So, if the perl module is available, and some rpm package exports that dependency, it will install the right package for you.
yum install 'perl(Chocolate::Belgian)'
(most likely perl-Chocolate-Belgian package, or even ChocolateFactory package)
Even it should work:
cpan -i module_name
2 ways that I know of :
USING PPM :
With Windows (ActivePerl) I've used ppm
from the command line type ppm. At the ppm prompt ...
ppm> install foo
or
ppm> search foo
to get a list of foo modules available. Type help for all the commands
USING CPAN :
you can also use CPAN like this (*nix systems) :
perl -MCPAN -e 'shell'
gets you a prompt
cpan>
at the prompt ...
cpan> install foo (again to install the foo module)
type h to get a list of commands for cpan
On Fedora you can use
# yum install foo
as long as Fedora has an existing package for the module.
Easiest way for me is this:
PERL_MM_USE_DEFAULT=1 perl -MCPAN -e 'install DateTime::TimeZone'
a) automatic recursive dependency detection/resolving/installing
b) it's a shell onliner, good for setup-scripts
If you want to put the new module into a custom location that your cpan shell isn't configured to use, then perhaps, the following will be handy.
#wget <URL to the module.tgz>
##unpack
perl Build.PL
./Build destdir=$HOME install_base=$HOME
./Build destdir=$HOME install_base=$HOME install
Sometimes you can use the yum search foo to search the relative perl module, then use yum install xxx to install.
Secure solution
Many answers mention the use of the cpan utility (which uses CPAN.pm) without a word on security. By default, CPAN 2.27 and earlier configures urllist to use a http URL (namely, http://www.cpan.org/), which allows MITM attacks, thus is insecure. This is what is used to download the CHECKSUMS files, so that it needs to be changed to a secure URL (e.g. https://www.cpan.org/).
So, after running cpan and accepting the default configuration, you need to modify the generated MyConfig.pm file (the full path is output) in the following way. Replace
'urllist' => [q[http://www.cpan.org/]],
by
'urllist' => [q[https://www.cpan.org/]],
Note: https is not sufficient; you also need a web site you can trust. So, be careful if you want to choose some arbitrary mirror.
Then you can use cpan in the usual way.
My bug report on rt.cpan.org about the insecure URL.
Simply executing cpan Foo::Bar on shell would serve the purpose.
Seems like you've already got your answer but I figured I'd chime in. This is what I do in some scripts on an Ubuntu (or debian server)
#!/usr/bin/perl
use warnings;
use strict;
#I've gotten into the habit of setting this on all my scripts, prevents weird path issues if the script is not being run by root
$ENV{'PATH'} = '/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin';
#Fill this with the perl modules required for your project
my #perl = qw(LWP::Simple XML::LibXML MIME::Lite DBI DateTime Config::Tiny Proc::ProcessTable);
chomp(my $curl = `which curl`);
if(!$curl){ system('apt-get install curl -y > /dev/null'); }
chomp(my $cpanm = system('/bin/bash', '-c', 'which cpanm &>/dev/null'));
#installs cpanm if missing
if($cpanm){ system('curl -s -L http://cpanmin.us | perl - --sudo App::cpanminus'); }
#loops through required modules and installs them if missing
foreach my $x (#perl){
eval "use $x";
if($#){
system("cpanm $x");
eval "use $x";
}
}
This works well for me, maybe there is something here you can use.
On Windows with the ActiveState distribution of Perl, use the ppm command.

libtcl8.4.so is needed by python-2.7.10-1.ppc AIX 7.1

I'm trying to install apache on aix 7.1. I'm following : https://developer.ibm.com/articles/au-aix-install-config-apache-subversions/
but i'm stuck at rpm -ivh *.rpm because of dependencies.
Getting an error:
libtcl8.4.so is needed by python-2.7.10-1.ppc
libtk8.4.so is needed by python-2.7.10-1.ppc
I've tried installing tcl and tk packages and installed.
tcl-8.6.7-1.aix5.1.ppc.rp
tk-8.6.7-1.aix5.1.ppc.rpm
but i'm still getting the same error. How do i resolve this issue.
This problem can occur in other contexts, as well. I ran into it when trying to install yum on an AIX 7.1 system. It uses the same ancient versions of python and tk/tcl.
I found the answer here: https://www.djouxtech.net/posts/aix-yum-installation/
The libtcl and libtk libraries must be version 8.4.x, 8.6.x will not work.
They come not from another RPM, but are native to AIX. You have to install the packages tk.base and tcl.base from your AIX install media.
The command you need will be similar to this:
installp -a -d <location of your media> tk.base
installp -a -d <location of your media> tcl.base
Disclaimer: I have not yet tested this.

Compiling MySQL 5.7.20 in CentOS 7 Issues (A Lot)

I am trying to setup a MySQL server using CentOS (No GUI) and I need to switch to OpenSSL instead of YaSSL in order to have access to the encryption tools.
The issues happen when runing the cmake. At first I got the error that cmake was not able to find boost, I fixed this adding the parameter -DWITH_BOOST.
The cmake line is as follows.
cmake . -DWITH_READLINE=ON -DWITH_SSL=system -DWITH_BOOST=/usr/local/src/mysql-5.7.20/boost/
After the adjustment I ran again the CMAKE the I got several errors.
SSL Error, cmake can not find the OpenSSL files. I checked if the library was installed, I also downloaded the tar.gz file and decompress it and pointed the cmake to the folder, none of this worked.
Can not find NUMA libraries, again I checked and it is installed, at this point I ran the system update to check for everything but this did not solve the issue.
Can not find the ncurses, the same thing, is on the system but for some reason cmake is not able to find those.
Can not fin libaio, I didn't have this one installed, I installed, ran cmake again, and again cmake was not able to find it.
I been looking around, trying to figure out all this issues, I've been joining information from different websites but still not able to figure out this.
Thanks ahead to everyone for the help.
You're facing the dependencies hell with MySQL. If you don't really need to compile from the sources, you still can install with the RPM which is much easier. The RPM method is described here : https://dev.mysql.com/doc/mysql-yum-repo-quick-guide/en/
As you're asking a ready-to-go install from the sources, this is what I just did and it worked, on a fresh CentOS 7.4 minimal, 2 vcpus 3Gb :
yum group install -y 'Development Tools'
yum install -y cmake ncurses-devel curl
curl -Ovk https://cdn.mysql.com/Downloads/MySQL-5.7/mysql-5.7.20.tar.gz
tar zxf mysql-5.7.20.tar.gz
cd mysql-5.7.20
cmake . -DDOWNLOAD_BOOST=1 -DWITH_BOOST=$HOME/boost -DENABLE_DOWNLOADS=1
make -j2
make install
After that you need to configure it, add the startup scripts, and of course secure it. Here are some additional docs :
http://howtolamp.com/lamp/mysql/5.6/installing/
https://dev.mysql.com/doc/refman/5.7/en/mysql-secure-installation.html
Perhaps try make clean; cmake clean; ldconfig then run your cmake command. Sometimes the system can't find the shared libraries, and ldconfig refreshes the library search path. This helped once when I was compiling something (emscripten?) which required a lot of libraries which I was installing as compilation errors arose.
The make clean; cmake clean will ensure that the compiler isn't looking at the old library search path when you recompile.

How to install expect and tcl on linux RHEL server 6.5

I am new to linux and i have few expect scripts to execute. I read few blogs on how to install expect and tcl. The command i am trying is
sudo yum install expect
sudo yum install tcl
I am getting
No package expect available
No package tcl available
It seems RHEL should have tcl and expect prebuilt but this is not the case in my version of linux.
How should i proceed from here ?
Help will be highly appreciated..Thanks :)
Install the development tools:
yum groupinstall "Development tools"
then
./configure
make
make install
should be good to go.
Have you tried this? In this way you will be able to compile from source.
1) Download the expect package from the below link
http://sourceforge.net/projects/expect/
2) Install the required dependecy packages "Tcl/Tk" language toolkit
# yum install tcl
3) Install the "expect" package using the below commands
# tar -zxvf expectx.xx.tar.gz
# ./configure
# make
# make install
I tried the following links and it worked for me. http://www.linuxfromscratch.org/blfs/view/svn/general/tcl.html http://www.linuxfromscratch.org/blfs/view/svn/general/expect.html
Try ActiveTcl from ActiveState:
http://downloads.activestate.com/ActiveTcl/releases/8.6.4.1/ActiveTcl8.6.4.1.299124-linux-x86_64-threaded.tar.gz
You can add EPEL Repo
On 32-Bit -
# rpm -Uvh http://epel.mirror.net.in/epel/6/i386/epel-release-6-8.noarch.rpm
On 64-Bit -
# rpm -Uvh http://epel.mirror.net.in/epel/6/x86_64/epel-release-6-8.noarch.rpm
and then you can use yum to install.
Also you can compile from source or get from ActiveState like in previous answers.