Start learning docker and try to setup a mysql container. But it dies immediately with Exited(1).
Following is the command used
docker run mysql -e MYSQL_ROOT_PASSWORD=password1
Looking at docker ps, it does not show any running docker container
with docker ps -a returns the following :
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
e681f56c52e2 mysql "/entrypoint.sh -e MY" 3 seconds ago Exited(1) 3 seconds ago lonely_rosalind
Nothing shows up for docker logs lonley_rosalind either
Any idea how to determine why if failed ?
I am running
ubuntu 15.04
docker version 1.9.1 build a34a1d5
Try this
docker run -e MYSQL_ROOT_PASSWORD=password1 mysql
When you are writing something after docker image name docker accepts it as a command for execution in your created container. Pattern for docker run:
docker run [OPTIONS] IMAGE [COMMAND] [ARG...]
Related
I'm just using docker for first time and I copy it on the internet
This is my file
Dockerfile
FROM mysql:oracle
COPY dbscript.sql /docker-entrypoint-initdb.d/
and I build it with this command
docker build -t mysqllab
after built I run it
docker run -d --name mysqllabtest -e MYSQL_ROOT_PASSWORD='abc123' mysqllab
it's run and get the message of container id, so I run
docker ps
to see what my container is running but it's don't have this container, I try it again with fast docker ps so I see it run for 4 seconds and terminate
What Can I do with this?
I just use
docker logs mysqllabtest
for check something wrong it about MySQL script so after I edited it It's works! thanks #Hans Kilian for tell me this command
I'm using docker to run a mysql 5.6 instance on my localhost (which is running ubuntu 20.04), using these instructions. When I create a new container for the database I use the following command
sudo docker run --name mysql-56-container -p 127.0.0.1:3310:3306 -e MYSQL_ROOT_PASSWORD=rootpassword -d mysql:5.6
That serves the intended purpose; I'm able to create the database using port 3310 and get on with what I want to do.
However when I reboot my localhost, I am unable to get back into sql5.6 using that port again.
When I list containers, I see none listed:
$ sudo docker ps
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
So I try to recreate it and am told that it already exists:
$ sudo docker run --name mysql-56-container -p 127.0.0.1:3310:3306 -e MYSQL_ROOT_PASSWORD=rootpassword -d mysql:5.6
docker: Error response from daemon: Conflict. The container name "/mysql-56-container" is already in use by container "a05582bff8fc02da37929d2fa2bba2e13c3b9eb488fa03fcffb09348dffd858f". You have to remove (or rename) that container to be able to reuse that name.
See 'docker run --help'.
So I try starting it but with no luck:
$ sudo docker start my-56-container
Error response from daemon: No such container: my-56-container
Error: failed to start containers: my-56-container
I clearly am not understanding how this works so my question is, how do I resume work on databases I've created in a docker container after I reboot?
docker ps just list running containers. If you reboot your laptop, all of them will be stopped. You can use docker ps --all or docker container ls --all to list all containers (running or stopped). You can check more about the docker ps command in docker ps command line reference
Once a container is created, you cannot create another with the same name. Tha is the reason your second docker run is failing.
You should use docker start instead. But you are trying to start a container with a different name. Your docker start command is using a container named my-56-container but it is called mysql-56-container. Please check your first docker run command in the question.
I am using the docker images supplied at https://hub.docker.com/_/redmine
I have chosen to use MySQL as my database backend. So I have 2 docker containers: MySQL and Redmine, as downloaded from dockerhub.
Following the instructions on the docker/redmine link above, I ran through the commands and found that the redmine docker would not start. Inspecting the docker logs, I see:
rake aborted!
Mysql2::Error::ConnectionError: Unknown MySQL server host redmine (-5)
I thought the 2 dockers were having difficulty talking to each other, so I setup a new docker network for both containers to use:
docker network create --driver bridge redmine-net
Adapting the instructions, on the docker/redmine link above, I run
docker run -d name our-mysql --network redmine-net -e MYSQL_USER=redmine -e MYSQL_PASSWORD=todays-password -e MYSQL_DATABASE=redmine -e MYSQL_RANDOM_ROOT_PASSWORD=1 -p 3306:3306 mysql:5.7
docker run -d name our-redmine --network redmine-net -e REDMINE_DB_MYSQL=redmine -e REDMINE_DB_USERNAME=redmine -e REDMINE_DB_PASSWORD=todays-password redmine:latest
However, the redmine contain still falls over instantly, with the same error.
EDIT Using the *.yml file as provided in the dockerhub redmine instructions works pretty faultlessly.
So the question is: what is the docker-compose method doing that docker run isn't handling?
Thank you.
The REDMINE_DB_MYSQL arg of the redmine container do reference to the mysql container, so, if you define the database service like our-mysql, then set REDMINE_DB_MYSQL=our-mysql
I am facing an issue when i want to run a mysql container: I tried with the example command i found on the Docker hub:
docker run --name some-mysql -e MYSQL_ROOT_PASSWORD=my-secret-pw -d mysql:5.6.24
docker ps -a
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
2569c1a8cbd2 mysql:5.6.24 "/entrypoint.sh mysq…" 5 seconds ago Exited (139) 4 seconds ago some-mysql
Shows that the container exited with code 139
And i can't have a single line of logs: the return of the docker logs command is empty...
~ docker logs 2569c1a8cbd2
~
I am using Docker(v19.03.1, build 74b1e89) for Debian(v10.0)
Are you running other containers? (maybe a separate project?)
I have two separate projects with their separate docker-compose files and their own services.
When one is running, the one with a mysql/mariadb container exits with 139. If I docker-compose down the other project, then the mysql container starts correctly.
I'm still figuring out why (came here for an answer to my problem), but you might have something similar.
Today I had the same issue after an upgrade from Debian 9 to 11. The mysql:5.6.24 Docker image just doesn't want to start. My solution was to upgrade to image mysql:5-debian
https://hub.docker.com/layers/mysql/library/mysql/5-debian/images/sha256-5adbbb05d43e67a7ed5f4856d3831b22ece5178d23c565b31cef61f92e3467ea?context=explore
I am still a beginner with docker, trying to use docker to help in my development prototyping. My environment is Mac using boot2docker, version as below
Client version: 1.3.1
Client API version: 1.15
Go version (client): go1.3.3
Git commit (client): 4e9bbfa
OS/Arch (client): darwin/amd64
Server version: 1.3.2
Server API version: 1.15
Go version (server): go1.3.3
Git commit (server): 39fa2fa
I ran the command as below:
docker run --name mymysql -e MYSQL_ROOT_PASSWORD=mypw -e MYSQL_DATABASE=bullshit -d mysql -p 3306:3306
docker start mymysql
I can see the process running as below:
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
22d3f780c270 mysql:5 "/entrypoint.sh -p 3 2 minutes ago Up 2 seconds 3306/tcp mymysql
However I still could not connect to the mysql instance running in the docker. I tried connect to the ip retrieved by :
$ boot2docker ip
The VM's Host only interface IP address is: 192.168.59.103
Please give me a pointer on how to solve this issue, I went through the tutorial but I am not sure what went wrong.
The command you used should give an error. The syntax for docker run is as follow:
Usage: docker run [OPTIONS] IMAGE [COMMAND] [ARG...]
You have to submit the options to docker run before specifying the image used (mysql in your case), and if it's the case, the command and possible argument(s) to that command.
Not specifying a command will run the default command in the image.
Before running again the container you should stop and remove the old one:
docker kill mymysql
docker rm mymysql
And, following your example you should run:
docker run --name mymysql -e MYSQL_ROOT_PASSWORD=mypw -e MYSQL_DATABASE=bullshit -p 3306:3306 -d mysql
As you set manually a port mapping from container's port 3306 to the same port of your Boot2docker VM, you should can access to MySQL using the IP of the Boot2docker instance, typically 192.168.59.103, and connecting to port 3306.