Related
I am trying to make a row in the end of the result set that shows the totals.
My query is this:
SELECT
[ ] = ISNULL(CAST(GEN_idPaciente AS VARCHAR)+'-'+nombrePaciente, 'TOTAL'),
[2016-11-01] = MAX([2016-11-01]),
[2016-11-02] = MAX([2016-11-02]),
[2016-11-03] = MAX([2016-11-03]),
[2016-11-04] = MAX([2016-11-04]),
TOTAL = COUNT([2016-11-01]) + COUNT([2016-11-02]) + COUNT([2016-11-03]) + COUNT([2016-11-04])
FROM
(
SELECT GEN_Paciente.GEN_idPaciente,COALESCE(GEN_ape_paternoPaciente, '')+' '+COALESCE(GEN_ape_maternoPaciente, '')+' '+COALESCE(GEN_nombrePaciente, '') AS nombrePaciente,HOS_fechaCategorizacion,HOS_nivel_riesgoCategorizacion+CAST(HOS_nivel_dependenciaCategorizacion AS VARCHAR) as riesgoDependencia
FROM HOS_Categorizacion
INNER JOIN HOS_Hospitalizacion
ON HOS_Hospitalizacion.HOS_idHospitalizacion = HOS_Categorizacion.HOS_idHospitalizacion
INNER JOIN GEN_Paciente
ON GEN_Paciente.GEN_idPaciente = HOS_Hospitalizacion.GEN_idPaciente
WHERE HOS_nivel_riesgoCategorizacion IS NOT NULL
) src
PIVOT
(
MAX(riesgoDependencia)
for HOS_fechaCategorizacion in ([2016-11-01],[2016-11-02],[2016-11-03],[2016-11-04])
) p
GROUP BY
ROLLUP(CAST(GEN_idPaciente AS VARCHAR)+'-'+nombrePaciente)
This gives me this result:
But as you can see the totals for the rows are right but the totals for the columns are wrong because I am using MAX instead of COUNT, but I only need COUNT in the TOTAL row, the others have to be MAX, so I wrote this query:
SELECT
[ ] = ISNULL(CAST(GEN_idPaciente AS VARCHAR)+'-'+nombrePaciente, 'TOTAL'),
[2016-11-01] = CASE WHEN CAST(GEN_idPaciente AS VARCHAR)+'-'+nombrePaciente IS NOT NULL THEN MAX([2016-11-01]) ELSE COUNT([2016-11-01]) END,
[2016-11-02] = CASE WHEN CAST(GEN_idPaciente AS VARCHAR)+'-'+nombrePaciente IS NOT NULL THEN MAX([2016-11-02]) ELSE COUNT([2016-11-02]) END,
[2016-11-03] = CASE WHEN CAST(GEN_idPaciente AS VARCHAR)+'-'+nombrePaciente IS NOT NULL THEN MAX([2016-11-03]) ELSE COUNT([2016-11-03]) END,
[2016-11-04] = CASE WHEN CAST(GEN_idPaciente AS VARCHAR)+'-'+nombrePaciente IS NOT NULL THEN MAX([2016-11-04]) ELSE COUNT([2016-11-04]) END,
TOTAL = COUNT([2016-11-01]) + COUNT([2016-11-02]) + COUNT([2016-11-03]) + COUNT([2016-11-04])
FROM
(
SELECT GEN_Paciente.GEN_idPaciente,COALESCE(GEN_ape_paternoPaciente, '')+' '+COALESCE(GEN_ape_maternoPaciente, '')+' '+COALESCE(GEN_nombrePaciente, '') AS nombrePaciente,HOS_fechaCategorizacion,HOS_nivel_riesgoCategorizacion+CAST(HOS_nivel_dependenciaCategorizacion AS VARCHAR) as riesgoDependencia
FROM HOS_Categorizacion
INNER JOIN HOS_Hospitalizacion
ON HOS_Hospitalizacion.HOS_idHospitalizacion = HOS_Categorizacion.HOS_idHospitalizacion
INNER JOIN GEN_Paciente
ON GEN_Paciente.GEN_idPaciente = HOS_Hospitalizacion.GEN_idPaciente
WHERE HOS_nivel_riesgoCategorizacion IS NOT NULL
) src
PIVOT
(
MAX(riesgoDependencia)
for HOS_fechaCategorizacion in ([2016-11-01],[2016-11-02],[2016-11-03],[2016-11-04])
) p
GROUP BY
ROLLUP(CAST(GEN_idPaciente AS VARCHAR)+'-'+nombrePaciente)
But that is not working
Thanks for your help!!
If I understand this correctly you want to count all columns which are not null. In this case you should just look at the condition IS NULL and not at the actual value at all. Try this:
DECLARE #tbl TABLE(ID INT IDENTITY, val1 VARCHAR(100),val2 VARCHAR(100),val3 VARCHAR(100));
INSERT INTO #tbl VALUES
('row1_val1','row1_val2',NULL)
,('row2_val1','row2_val2','row2_val3')
,(NULL,'row2_val2',NULL)
,(NULL,NULL,'row2_val3')
,(NULL,NULL,NULL);
SELECT *
,CASE WHEN val1 IS NULL THEN 0 ELSE 1 END
+CASE WHEN val2 IS NULL THEN 0 ELSE 1 END
+CASE WHEN val3 IS NULL THEN 0 ELSE 1 END AS CountOfValNotNull
FROM #tbl
UPDATE: Add a final Totals Row
You'd need ugly fiddling with a CTE, an additional sort column, UNION ALL to add another row and a sub_select.
Use the outer-most ORDER BY to get the artificial Totals-Row to the end
hint: Use the #tbl variable from above!
WITH SortedRows AS
(
SELECT ROW_NUMBER() OVER(ORDER BY ID) AS SortColumn
,*
,CASE WHEN val1 IS NULL THEN 0 ELSE 1 END
+CASE WHEN val2 IS NULL THEN 0 ELSE 1 END
+CASE WHEN val3 IS NULL THEN 0 ELSE 1 END AS CountOfValNotNull
FROM #tbl
)
SELECT tbl1.*
FROM
(
SELECT * FROM SortedRows
UNION ALL
SELECT 999999,0,'','','',(SELECT SUM(CountOfValNotNull) FROM SortedRows)
) AS tbl1
ORDER BY tbl1.SortColumn
I need to use join instead of this query with same condition
select (
(
select
case when sum(A.[Quantity]) is null then 0 else sum(A.[Quantity]) END
from [tablename1] A
where ((A.[Status]=4) AND (A.[Spcl Order]=1) AND (A.[Finished Date] = aa.FromDate ))
)
+
(
select
case when sum(A.[Quantity]) is null then 0 else sum(A.[Quantity]) END
from [tablename2] A
where ((A.[Item Category Code] = 'STYLES') AND (A.[Prod_ Order No_]='') AND
( A.[Buy-from Vendor No_] in (#vendor)) AND (A.[Quantity]>0) AND
(A.[Spcl Order]= 1) AND ( A.[Posting Date] = aa.FromDate))
)
)
I have a sql Query working fine but not able to generate accurate result
My Query Details as follows :
declare #test varchar(500)
SELECT #test=coalesce(#test+',','') + cast(RoleName as varchar) FROM
( select roles.RoleName from LU_BCOMS_usersroles usrroles
inner join LU_BCOMS_roles roles
on roles.roleid = usrroles.Roles_roleid
where Users_Userid='MV10310'
) as Tbl
select repfamily.ProductName as Category,repfamily.Family as SeqChange,repfamily.RepFamily as DescOfChange, req.*,
TaskCompVer =
CASE WHEN req.UpdateByASPM is not null THEN 'Provide PLQM Wish List'
WHEN req.UpdateByASPM is null THEN 'Provide ASPM Wish List'
WHEN req.CreatedBy is not null THEN 'Provide ASPM Wish List'
END
from performa.TX_BCOMS_Request as req
inner join TX_BCOMS_Requestrepfamily family on
family.request_requestid=req.requestid
inner join LU_BCOMS_RepFamily as repfamily on
family.RepFamily_repFamilyid=repfamily.repfamilyid
where req.UpdatedByPLQM is null and (
((CHARINDEX('ASPM',#test)> 0 and CHARINDEX('PLQM',#test)> 0) and req.UpdatedByPLQM IS null)
or
((CHARINDEX('PLQM' ,#test)> 0) and req.UpdateByASPM IS NOT null)
or
((CHARINDEX('ASPM',#test)> 0 ) and req.UpdateByASPM IS null)
or
((CHARINDEX('PLQM' ,#test)> 0) and req.UpdateByASPM IS NOT null)
or
((CHARINDEX('ASPM' ,#test)< 0 and CHARINDEX('PLQM',#test) < 0) and req.CreatedBy IS null)
)
Output :
Caterogy SeqCategory DescofChange RequestId TaskCompVer
BIGBEAR BIGBEAR BIGBEAR B14020002 Provide ASPM Wish List
ARCUS3PL KOJN-RE ARCUS3PL B14020002 Provide ASPM Wish List
AURORA Aurora Aurora B14020003 Provide ASPM Wish List
When requestId and TaskCompVer are same there is no need to show 2 records, have to filter something like below..
I need output like below :
Output :
Caterogy SeqCategory DescofChange RequestId TaskCompVer
BIGBEAR,ARCUS3PL BIGBEAR,KOJN-RE BIGBEAR,ARCUS3PL B14020002 Provide ASPM Wish List
AURORA Aurora Aurora B14020003 Provide ASPM Wish List
I need to display the actual as above I tried using STUFF function cannot able to generate the actual output...
May it helpful for you.
CREATE TABLE tempTable(name VARCHAR(50),subjects VARCHAR(50),phone VARCHAR(50))
INSERT INTO tempTable VALUES
('siddique','CRM','123456'),('siddique','Asp.net','9874563'),
('siddique','sql server','44451685'),('Danish','MVC','123456'),
('Danish','sql server','9874563'),('Danish','WCF','44451685'),
('shah g','Account','123456'),('shah g','MBA','9874563'),
('shah g','Math','44451685')
Your simple query select all data
SELECT * FROM tempTable
name subjects phone
siddique CRM 123456
siddique Asp.net 9874563
siddique sql server 44451685
Danish MVC 123456
Danish sql server 9874563
Danish WCF 44451685
shah g Account 123456
shah g MBA 9874563
shah g Math 44451685
Using STUFF to comma seperate your values agaist each name (GROUP BY name)
SELECT
name
,STUFF((SELECT ', ' + subjects
FROM tempTable temp2 WHERE temp2.name=temp1.name
FOR XML PATH('')), 1, 1, '') AS subjects
,STUFF((SELECT '; ' + phone
FROM tempTable temp2 WHERE temp2.name=temp1.name
FOR XML PATH('')), 1, 1, '') AS phones
FROM tempTable temp1
GROUP BY name
DROP TABLE tempTable
Output:
name subjects phones
Danish MVC, sql server, WCF 123456; 9874563; 44451685
shah g Account, MBA, Math 123456; 9874563; 44451685
siddique CRM, Asp.net, sql server 123456; 9874563; 44451685
I needed a similar Query where i needed it the same way... Here is My Query:
SELECT
'All Users' as QuestionOption,
Stuff( (SELECT N'; ' + email FROM users where email>=' ' FOR XML PATH(''),TYPE)
.value('text()[1]','nvarchar(max)'),1,2,N'') as QuestionOptionValue
UNION
SELECT 'All Volunteers' as QuestionOption, Stuff( (SELECT N'; ' + U.email FROM
dbo.Users AS U LEFT OUTER JOIN (SELECT up.UserID, MAX(CASE WHEN ppd.PropertyName = \
'Volunteer' THEN up.PropertyValue ELSE '' END) AS Volunteer
FROM
dbo.UserProfile AS up
INNER JOIN dbo.ProfilePropertyDefinition AS ppd ON
up.PropertyDefinitionID = ppd.PropertyDefinitionID and ppd.PortalID = 0 Group By
up.UserID) as upd on U.UserID = upd.UserID Where upd.Volunteer='True' FOR XML
PATH(''),TYPE) .value('text()[1]','nvarchar(max)'),1,2,N'') as QuestionOptionValue
UNION
SELECT 'All Committees' as QuestionOption, Stuff( (SELECT N'; ' + U.email FROM
dbo.USERS AS U LEFT OUTER JOIN (SELECT up.UserID, MAX(CASE WHEN ppd.PropertyName =
'Committee' THEN up.PropertyValue ELSE '' END) AS Committee FROM dbo.UserProfile AS
up INNER JOIN dbo.ProfilePropertyDefinition AS ppd ON up.PropertyDefinitionID =
ppd.PropertyDefinitionID and ppd.PortalID = 0 Group By up.UserID) as upd on U.UserID
= upd.UserID Where upd.Committee >' ' FOR XML PATH(''),TYPE) .value('text()
[1]','nvarchar(max)'),1,2,N'') as QuestionOptionValue
Im not the best at writing them, so you could use mine as an example. my output is:
QuestionOption QuestionOptionValue
All Committees Email#email.com; email#email.com
All Users Email#email.com; email#email.com
All Volunteers Email#email.com; email#email.com
I hope this helps you!
try this,,,,
declare #test varchar(500)
SELECT #test=coalesce(#test+',','') + cast(RoleName as varchar) FROM
( select roles.RoleName from LU_BCOMS_usersroles usrroles
inner join LU_BCOMS_roles roles
on roles.roleid = usrroles.Roles_roleid
where Users_Userid='MV10310'
) as Tbl
select
req.*,
TaskCompVer =
CASE WHEN req.UpdateByASPM is not null THEN 'Provide PLQM Wish List'
WHEN req.UpdateByASPM is null THEN 'Provide ASPM Wish List'
WHEN req.CreatedBy is not null THEN 'Provide ASPM Wish List'
END,
STUFF(
(
select ','+repfamily.ProductName
from TX_BCOMS_Requestrepfamily family
inner join LU_BCOMS_RepFamily as repfamily on family.RepFamily_repFamilyid=repfamily.repfamilyid
where family.request_requestid=req.requestid
FOR XML PATH('') ), 1, 1, '' ) as 'Category',
STUFF(
(
select ','+repfamily.Family
from TX_BCOMS_Requestrepfamily family
inner join LU_BCOMS_RepFamily as repfamily on family.RepFamily_repFamilyid=repfamily.repfamilyid
where family.request_requestid=req.requestid
FOR XML PATH('') ), 1, 1, '' ) as 'SeqChange',
STUFF(
(
select ','+repfamily.RepFamily
from TX_BCOMS_Requestrepfamily family
inner join LU_BCOMS_RepFamily as repfamily on family.RepFamily_repFamilyid=repfamily.repfamilyid
where family.request_requestid=req.requestid
FOR XML PATH('') ), 1, 1, '' ) as 'DescOfChange' ,
repfamily.ProductName as Category,repfamily.Family as SeqChange,repfamily.RepFamily as DescOfChange,
from performa.TX_BCOMS_Request as req
where req.UpdatedByPLQM is null and (
((CHARINDEX('ASPM',#test)> 0 and CHARINDEX('PLQM',#test)> 0) and req.UpdatedByPLQM IS null)
or
((CHARINDEX('PLQM' ,#test)> 0) and req.UpdateByASPM IS NOT null)
or
((CHARINDEX('ASPM',#test)> 0 ) and req.UpdateByASPM IS null)
or
((CHARINDEX('PLQM' ,#test)> 0) and req.UpdateByASPM IS NOT null)
or
((CHARINDEX('ASPM' ,#test)< 0 and CHARINDEX('PLQM',#test) < 0) and req.CreatedBy IS null)
)
I have a situation where in i have to get the data from an Year Ago , Previous Month and Current Month. What is the best way to achieve this ?
I have a table which contains the year,month and data in it. In the below query have added a filter
c.ReportMonth = DATENAME(month, #12MonthsAgo) and c.ReportYear = Year(#12MonthsAgo)
This is for an year ago. In the same way if i have to get the previous month and current month, can i do that with in the same query by setting the filters ? how do we do that ?
Is there a better way other than i end up writing 3 select queries and then putting the select to a tmp table and later merging the tables ?
create table #TPTABLE
(
KPIName varchar(150)
,MetricName Varchar(200)
,MetricId INT
,DataSource varchar(50)
,[AnYearAgo] Float
,[PreviousMonth] float
,[CurrentMonth] float
);
insert into #TPTABLE
(KPIName,MetricName,MetricId,DataSource,[AnYearAgo])
SELECT
p.KPIName
,p.MetricName
,p.MetricId
,p.DataSource
,c.Value as [AnYearAgo]
FROM [IntegratedCare].[report].[KPIMetricDetails] p
LEFT JOIN [IntegratedCare].[report].[KPIMectricValues] c
ON p.[MetricId] = c.MetricId
WHERE c.ReportMonth = DATENAME(month, #12MonthsAgo) and c.ReportYear = Year(#12MonthsAgo)
ORDER BY KPI_Id ASC, [MetricId] ASC
SELECT
p.KPIName
,p.MetricName
,p.MetricId
,p.DataSource
,c.Value
,c2.Value
,c3.Value
FROM [IntegratedCare].[report].[KPIMetricDetails] p
LEFT JOIN [IntegratedCare].[report].[KPIMectricValues] c
ON p.[MetricId] = c.MetricId
AND c.[CommissionerCode] = COALESCE(NULLIF(#Commissioner, ''), c.[CommissionerCode])
ANd ReportMonth = DATENAME(month, #12MonthsAgo) and c.ReportYear = Year(#12MonthsAgo)
LEFT JOIN [IntegratedCare].[report].[KPIMectricValues] c2
ON p.[MetricId] = c2.MetricId
AND c2.[CommissionerCode] = COALESCE(NULLIF(#Commissioner, ''), c2.[CommissionerCode])
ANd c2.ReportMonth = DATENAME(month, #PreviousMonth) and c2.ReportYear = Year(#PreviousMonth)
LEFT JOIN [IntegratedCare].[report].[KPIMectricValues] c3
ON p.[MetricId] = c3.MetricId
AND c3.[CommissionerCode] = COALESCE(NULLIF(#Commissioner, ''), c3.[CommissionerCode])
ANd c3.ReportMonth = DATENAME(month, #PreviousMonth) and c3.ReportYear = Year(#PreviousMonth)
ORDER BY p.KPI_Id ASC, p.[MetricId] ASC
I think what you need is this:
insert into #TPTABLE
(KPIName,MetricName,MetricId,DataSource,[AnYearAgo])
SELECT
KPIName
,MetricName
,MetricId
,DataSource
,[AnYearAgo]
,[PreviousMonth]
,[CurrentMonth]
FROM (
SELECT
KPIName
,MetricName
,MetricId
,DataSource
,KPI_Id
,sum(case when c.ReportMonth = DATENAME(month, #12MonthsAgo) and c.ReportYear = Year(#12MonthsAgo) then c.Value else 0 end) as [AnYearAgo]
,sum(case when c.ReportMonth = DATENAME(month, #PreviousMonth) and c.ReportYear = Year(#PreviousMonth) then c.Value else 0 end) as [PreviousMonth]
,sum(case when c.ReportMonth = DATENAME(month, #CurrentMonth) and c.ReportYear = Year(#CurrentMonth) then c.Value else 0 end) as [CurrentMonth]
FROM [IntegratedCare].[report].[KPIMetricDetails] p
LEFT JOIN [IntegratedCare].[report].[KPIMectricValues] c
ON p.[MetricId] = c.MetricId
GROUP BY KPIName, MetricName, MetricId, DataSource, KPI_Id
ORDER BY KPI_Id ASC, [MetricId] ASC
I've written an SSRS report to help me keep track of SSRS subscriptions. I've repurposed a script that will use Reportserver.dbo.Subscriptions.LastStatus to view email recipients, however, it will only list the first 520 characters of LastStatus. Because some of our distribution lists are quite large, some of the names that my script searches for are not being found (even though they are part of the distribution). Below is the script that I am using:
SELECT Reportname = c.Name
,FileLocation = c.Path
,SubscriptionDesc=su.Description
,Subscriptiontype=su.EventType
,su.LastStatus
,su.LastRunTime
,Schedulename=sch.Name
,ScheduleType = sch.EventType
,ScheduleFrequency =
CASE sch.RecurrenceType
WHEN 1 THEN 'Once'
WHEN 2 THEN 'Hourly'
WHEN 4 THEN 'Daily/Weekly'
WHEN 5 THEN 'Monthly'
END
,su.Parameters
FROM Reportserver.dbo.Subscriptions su
JOIN Reportserver.dbo.Catalog c
ON su.Report_OID = c.ItemID
JOIN Reportserver.dbo.ReportSchedule rsc
ON rsc.ReportID = c.ItemID
AND rsc.SubscriptionID = su.SubscriptionID
JOIN Reportserver.dbo.Schedule Sch
ON rsc.ScheduleID = sch.ScheduleID
WHERE LastStatus like #Email
ORDER BY LastRunTime DESC
Any code that I have found online uses the LastStatus column to display this data. If anyone has any suggestions as to a more complete way for me to list all of the members of the report distribution list, I would appreciate it.
Below is SQL to query for the full text of the subscription parameters. I think this will work with extremely long address lists, but I don't have a test server with long address lists available right now.
If using this in production, I'd probably throw in a couple of WITH ( NOLOCK )'s and wouldn't expect support from MS on problems.
;
WITH subscriptionXmL
AS (
SELECT
SubscriptionID ,
OwnerID ,
Report_OID ,
Locale ,
InactiveFlags ,
ExtensionSettings ,
CONVERT(XML, ExtensionSettings) AS ExtensionSettingsXML ,
ModifiedByID ,
ModifiedDate ,
Description ,
LastStatus ,
EventType ,
MatchData ,
LastRunTime ,
Parameters ,
DeliveryExtension ,
Version
FROM
ReportServer.dbo.Subscriptions
),
-- Get the settings as pairs
SettingsCTE
AS (
SELECT
SubscriptionID ,
ExtensionSettings ,
-- include other fields if you need them.
ISNULL(Settings.value('(./*:Name/text())[1]', 'nvarchar(1024)'),
'Value') AS SettingName ,
Settings.value('(./*:Value/text())[1]', 'nvarchar(max)') AS SettingValue
FROM
subscriptionXmL
CROSS APPLY subscriptionXmL.ExtensionSettingsXML.nodes('//*:ParameterValue') Queries ( Settings )
)
SELECT
*
FROM
SettingsCTE
WHERE
settingName IN ( 'TO', 'CC', 'BCC' )
I also found this query from SQL Server MSDN Social;
Original Query Author MSDN Profile: Sandip Shinde
SELECT
c.Name AS ReportName,
'Next Run Date' = CASE next_run_date
WHEN 0 THEN null
ELSE
substring(convert(varchar(15),next_run_date),1,4) + '/' +
substring(convert(varchar(15),next_run_date),5,2) + '/' +
substring(convert(varchar(15),next_run_date),7,2)
END,
'Next Run Time' = isnull(CASE len(next_run_time)
WHEN 3 THEN cast('00:0'
+ Left(right(next_run_time,3),1)
+':' + right(next_run_time,2) as char (8))
WHEN 4 THEN cast('00:'
+ Left(right(next_run_time,4),2)
+':' + right(next_run_time,2) as char (8))
WHEN 5 THEN cast('0' + Left(right(next_run_time,5),1)
+':' + Left(right(next_run_time,4),2)
+':' + right(next_run_time,2) as char (8))
WHEN 6 THEN cast(Left(right(next_run_time,6),2)
+':' + Left(right(next_run_time,4),2)
+':' + right(next_run_time,2) as char (8))
END,'NA'),
Convert(XML,[ExtensionSettings]).value('(//ParameterValue/Value[../Name="TO"])[1]','nvarchar(50)') as [To]
,Convert(XML,[ExtensionSettings]).value('(//ParameterValue/Value[../Name="CC"])[1]','nvarchar(50)') as [CC]
,Convert(XML,[ExtensionSettings]).value('(//ParameterValue/Value[../Name="RenderFormat"])[1]','nvarchar(50)') as [Render Format]
,Convert(XML,[ExtensionSettings]).value('(//ParameterValue/Value[../Name="Subject"])[1]','nvarchar(50)') as [Subject]
---Example report parameters: StartDateMacro, EndDateMacro & Currency.
,Convert(XML,[Parameters]).value('(//ParameterValue/Value[../Name="StartDateMacro"])[1]','nvarchar(50)') as [Start Date]
,Convert(XML,[Parameters]).value('(//ParameterValue/Value[../Name="EndDateMacro"])[1]','nvarchar(50)') as [End Date]
,Convert(XML,[Parameters]).value('(//ParameterValue/Value[../Name="Currency"])[1]','nvarchar(50)') as [Currency]
,[LastStatus]
,[EventType]
,[LastRunTime]
,[DeliveryExtension]
,[Version]
FROM
dbo.[Catalog] c
INNER JOIN dbo.[Subscriptions] S ON c.ItemID = S.Report_OID
INNER JOIN dbo.ReportSchedule R ON S.SubscriptionID = R.SubscriptionID
INNER JOIN msdb.dbo.sysjobs J ON Convert(nvarchar(128),R.ScheduleID) = J.name
INNER JOIN msdb.dbo.sysjobschedules JS ON J.job_id = JS.job_id
According to MS (https://learn.microsoft.com/en-us/sql/reporting-services/subscriptions/manage-subscription-owners-and-run-subscription-powershell?view=sql-server-ver16), you can also use this powershell command:
$webSRV = New-WebServiceProxy -Uri "http://myservername/ReportServer/ReportService2010.asmx" -Namespace SSRS.ReportingService2010 -UseDefaultCredential;
$mySubsList = $webSRV.ListSubscriptions("/");
$mySubsList | select *